- discuss - lists.mariadb.org

[Maria-discuss] Query exceeding 16384 bytes, skipping. Probably a bulk insert query.
by Umarzuki Mochlis 02 Apr '15

02 Apr '15

When I'm restoring dump of all database to one of my MariaDB 10.0 nodes (2 nodes galera cluster), I saw "Query exceeding 16384 bytes, skipping. Probably a bulk insert query.". So I ran again mysqldump for all database and diff with its original dump. There's a lot of differences. Where should I configure on my.cnf to allow each query from dump running successfully? Thanks.

1 0

[Maria-discuss] New Question: Strange issue with a complex stored procedure and Union Query
by AskMonty KB 01 Apr '15

01 Apr '15

Hello, A new question has been asked in "MariaDB Community" by stewartpage. Please answer it at http://mariadb.com/kb/en/strange-issue-with-a-complex-stored-procedure-and-… as the person asking the question may not be subscribed to the mailing list. -------------------------------- I have a complex stored procedure that executes on a schedule. It runs a union query and inserts the results into a table. I recently discovered that it needed to have a LIMIT added to both queries so I enclosed the two selects in brackets, and immediately the query error'd. Removing the brackets allowed the query to run correctly. Are there any issues I should be aware of? -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/strange-issue-with-a-complex-stored-procedure-and-…

1 0

[Maria-discuss] One node out of cluster keeps crashing
by Momin Rashid 31 Mar '15

31 Mar '15

Hello everyone, MariaDB-Galera-server-10.0.17-1.el7.centos.x86_64 MariaDB-client-10.0.17-1.el7.centos.x86_64 galera-25.3.9-1.rhel7.el7.centos.x86_64 We have a three node MariaDB-galera cluster, and one of our nodes keeps crashing. The other two nodes have been running fine for weeks without issues. They all have the exact same specifications. I have even rebuilt this node from ground up, and the new node still crashed. Could someone take a look at the following logs and help me figure out what is wrong, and how can we avoid this in future? ===================================== 2015-03-30 10:13:05 7f5be57fc700 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 19 seconds ----------------- BACKGROUND THREAD ----------------- srv_master_thread loops: 116110 srv_active, 0 srv_shutdown, 343879 srv_idle srv_master_thread log flush and writes: 459986 ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 56843 OS WAIT ARRAY INFO: signal count 804274 Mutex spin waits 1039838, rounds 335818, OS waits 4493 RW-shared spins 393078, rounds 1863774, OS waits 46608 RW-excl spins 34511, rounds 1424782, OS waits 5051 Spin rounds per wait: 0.32 mutex, 4.74 RW-shared, 41.28 RW-excl ------------ TRANSACTIONS ------------ Trx id counter 3156054 Purge done for trx's n:o < 3155992 undo n:o < 0 state: running but idle History list length 814 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 3155294, not started MySQL thread id 246025, OS thread handle 0x7f5d84124700, query id 32716796 ha-proxy.prod.lan 10.0.2.11 appl_01 cleaning up ---TRANSACTION 3154332, not started MySQL thread id 245589, OS thread handle 0x7f5d4c963700, query id 32642939 ha-proxy.prod.lan 10.0.2.11 appl_01 cleaning up ---TRANSACTION 3150705, not started MySQL thread id 245568, OS thread handle 0x7f5d840db700, query id 32777452 ha-proxy.prod.lan 10.0.2.11 appl_01 cleaning up ---TRANSACTION 3152515, not started MySQL thread id 245295, OS thread handle 0x7f5d851ff700, query id 32560015 ha-proxy.prod.lan 10.0.2.11 appl_01 cleaning up ---TRANSACTION 3155566, not started MySQL thread id 245281, OS thread handle 0x7f5d86d23700, query id 32774720 ha-proxy.prod.lan 10.0.2.11 appl_01 cleaning up ---TRANSACTION 3156038, not started TOO MANY LOCKS PRINTED FOR THIS TRX: SUPPRESSING FURTHER PRINTS -------- FILE I/O -------- I/O thread 0 state: waiting for completed aio requests (insert buffer thread) I/O thread 1 state: waiting for completed aio requests (log thread) I/O thread 2 state: waiting for completed aio requests (read thread) I/O thread 3 state: waiting for completed aio requests (read thread) I/O thread 4 state: waiting for completed aio requests (read thread) I/O thread 5 state: waiting for completed aio requests (read thread) I/O thread 6 state: waiting for completed aio requests (write thread) I/O thread 7 state: waiting for completed aio requests (write thread) I/O thread 8 state: waiting for completed aio requests (write thread) I/O thread 9 state: waiting for completed aio requests (write thread) Pending normal aio reads: 0 [0, 0, 0, 0] , aio writes: 0 [0, 0, 0, 0] , ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 294306 OS file reads, 2485633 OS file writes, 532545 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s ------------------------------------- INSERT BUFFER AND ADAPTIVE HASH INDEX ------------------------------------- Ibuf: size 1, free list len 63, seg size 65, 28112 merges merged operations: insert 42583, delete mark 939, delete 29 discarded operations: insert 0, delete mark 0, delete 0 0.00 hash searches/s, 0.00 non-hash searches/s --- LOG --- Log sequence number 121964244699 Log flushed up to 121964244699 Pages flushed up to 121964244699 Last checkpoint at 121964244699 Max checkpoint age 216721613 Checkpoint age target 209949063 Modified age 0 Checkpoint age 0 0 pending log writes, 0 pending chkp writes 153001 log i/o's done, 0.00 log i/o's/second ---------------------- BUFFER POOL AND MEMORY ---------------------- Total memory allocated 6263013376; in additional pool allocated 0 Total memory allocated by read views 3288 Internal hash tables (constant factor + variable factor) Adaptive hash index 423323504 (96884488 + 326439016) Page hash 757784 (buffer pool 0 only) Dictionary cache 25112304 (24222544 + 889760) File system 854680 (812272 + 42408) Lock system 15172408 (15139192 + 33216) Recovery system 0 (0 + 0) Dictionary memory allocated 889760 Buffer pool size 373496 Buffer pool size, bytes 6119358464 Free buffers 34210 Database pages 319362 Old database pages 118034 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 1891, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 294208, created 25154, written 2272207 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 319362, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---------------------- INDIVIDUAL BUFFER POOL INFO ---------------------- ---BUFFER POOL 0 Buffer pool size 46687 Buffer pool size, bytes 764919808 Free buffers 4184 Database pages 40015 Old database pages 14791 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 237, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 36928, created 3087, written 294016 LRU len: 40015, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 1 Buffer pool size 46687 Buffer pool size, bytes 764919808 Free buffers 4881 Database pages 39304 Old database pages 14528 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 232, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 36418, created 2886, written 189961 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 39304, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 2 Buffer pool size 46687 Buffer pool size, bytes 764919808 Free buffers 4278 Database pages 39906 Old database pages 14748 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 215, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 36782, created 3124, written 154398 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 39906, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 3 Buffer pool size 46687 Buffer pool size, bytes 764919808 Free buffers 4286 Database pages 39917 Old database pages 14754 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 247, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 36327, created 3590, written 392683 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 39917, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 4 Buffer pool size 46687 Buffer pool size, bytes 764919808 Free buffers 4215 Database pages 39956 Old database pages 14769 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 276, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 36833, created 3123, written 258687 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 39956, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 5 Buffer pool size 46687 Buffer pool size, bytes 764919808 Free buffers 4082 Database pages 40127 Old database pages 14831 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 243, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 36928, created 3199, written 252207 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 40127, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 6 Buffer pool size 46687 Buffer pool size, bytes 764919808 Free buffers 4010 Database pages 40224 Old database pages 14860 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 223, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 37120, created 3104, written 527443 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 40224, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 7 Buffer pool size 46687 Buffer pool size, bytes 764919808 Free buffers 4274 Database pages 39913 Old database pages 14753 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 218, not young 0 0.00 youngs/s, 0.00 non-youngs/s Pages read 36872, created 3041, written 202812 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 39913, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] -------------- ROW OPERATIONS -------------- 0 queries inside InnoDB, 0 queries in queue 2 read views open inside InnoDB 8 RW transactions active inside InnoDB 0 RO transactions active inside InnoDB 8 out of 1000 descriptors used ---OLDEST VIEW--- Normal read view Read view low limit trx n:o 3156042 Read view up limit trx id 3155989 Read view low limit trx id 3156042 Read view individually stored trx ids: Read view trx id 3155989 Read view trx id 3156029 Read view trx id 3156038 ----------------- Main thread process no. 2488, id 140032660715264, state: sleeping Number of rows inserted 1182044, updated 1504189, deleted 4658, read 2328285511 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s Number of system rows inserted 0, updated 0, deleted 0, read 0 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s ---------------------------- END OF INNODB MONITOR OUTPUT ============================ WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long WSREP: BF lock wait long

1 0

[Maria-discuss] New Question: Please list OS requirements.
by AskMonty KB 31 Mar '15

31 Mar '15

Hello, A new question has been asked in "Graphical Clients" by openiduser56. Please answer it at http://mariadb.com/kb/en/please-list-os-requirements/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- It' quite annoying to have to click around the destination website to try to work out what it takes to actually run the tool. I suspect most people looking for a GUI tool already have an operating system they want it to run on, and sometimes even restrictions on how much extra stuff they can install to get it working. So saying "runs on MacOS... you just need Parallels and a Windows licence" is unlikely to make sense. -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/please-list-os-requirements/

1 0

[Maria-discuss] mariadb-galera-server : Depends: mariadb-galera-server-10.0 (= 10.0.17+maria-1~trusty) but it is not going to be installed
by Umarzuki Mochlis 27 Mar '15

27 Mar '15

Hi, Error as title happened when I'm following http://www.severalnines.com/blog/howto-offline-upgrade-galera-cluster-mysql… to upgrade from 5.5 to 10.0 Repos /etc/apt/sources.list.d/MariaDB.list deb http://ftp.osuosl.org/pub/mariadb/repo/10.0/ubuntu trusty main /etc/apt/sources.list deb http://my.archive.ubuntu.com/ubuntu/ trusty main restricted deb-src http://my.archive.ubuntu.com/ubuntu/ trusty main restricted deb http://my.archive.ubuntu.com/ubuntu/ trusty-updates main restricted deb-src http://my.archive.ubuntu.com/ubuntu/ trusty-updates main restricted deb http://my.archive.ubuntu.com/ubuntu/ trusty multiverse deb-src http://my.archive.ubuntu.com/ubuntu/ trusty multiverse deb http://my.archive.ubuntu.com/ubuntu/ trusty-updates multiverse deb-src http://my.archive.ubuntu.com/ubuntu/ trusty-updates multiverse deb http://my.archive.ubuntu.com/ubuntu/ trusty-backports main restricted multiverse deb http://security.ubuntu.com/ubuntu trusty-security main restricted deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted deb http://security.ubuntu.com/ubuntu trusty-security multiverse deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse deb http://repo.percona.com/apt trusty main deb-src http://repo.percona.com/apt trusty main Command used $ sudo LC_ALL=en_US.utf8 DEBIAN_FRONTEND=noninteractive apt-get -o Dpkg::Options::='--force-confnew' -y install mariadb-galera-server galer $ sudo dpkg --get-selections | grep maria libmariadbclient18 install mariadb-client-5.5 deinstall mariadb-client-core-5.5 install mariadb-common install mariadb-galera-server-5.5 deinstall $ sudo apt-get remove libmariadbclient18 mariadb-client-5.5 mariadb-client-core-5.5 mariadb-common mariadb-galera-server-5.5 Even after purging those packages I'm still having same error. How to solve this? Any help is appreciated. Ubuntu 14.04

2 2

[Maria-discuss] Source package for Ubuntu Precise is missing
by Kouhei Sutou 25 Mar '15

25 Mar '15

Hi, It seems that source package of MariaDB 10.0.17 for Ubuntu Precise Pangolin (12.04 LTS) isn't provided. Binary packages for Precise Pangolin are provided. mariadb-10.0_10.0.17+maria-1~trusty.dsc (for Trusty Tahr) and mariadb-10.0_10.0.17+maria-1~utopic.dsc (for Utopic Unicorn) exist at: http://mirror.jmu.edu/pub/mariadb/repo/10.0/ubuntu/pool/main/m/mariadb-10.0/ But for Precise doesn't exist at there. Is Precise support finished? Could you confirm it? FYI: Source package of MariaDB 5.5.42 for Ubuntu Precise Pangolin (12.04 LTS) is provided. http://mirror.jmu.edu/pub/mariadb/repo/5.5/ubuntu/pool/main/m/mariadb-5.5/ Thanks, -- kou

2 2

[Maria-discuss] Inconsistent engine typecode for TokuDB
by Jan Hejl 23 Mar '15

23 Mar '15

Hello, i moved from TokuDB 7.5.x MySQL (5.5.39) fork to MariaDB 10.0.16. Since then mysqld.err show error like this: 150315 22:30:29 [Warning] ./imperial@002bkv@002bcz773/scanner.frm is inconsistent: engine typecode 42, engine name TokuDB (43) for each TokuDB table access. Editing 4th byte of FRM file didn't helped, it gets overwriten to 0x2A value again. Does anyone know how to get rid of these warnings? Thanks Jan

2 3

[Maria-discuss] Reason for changing the thread_pool_size default value?
by Ian Gilfillan 19 Mar '15

19 Mar '15

Hi What was the reason for changing the default thread_pool_size from the number of CPU's to 8? If I look at the history of sql_vars.cc - https://github.com/MariaDB/server/commits/10.1/sql/sys_vars.cc?page=2 - the commit made on the 17th of November still has it as the number of CPU's, but the next commit on the 2nd of December has it at 8. This doesn't appear as a change in the summary. ian

2 1

[Maria-discuss] MariaDB 10: how to convert Aria table to InnoDB?
by Reindl Harald 19 Mar '15

19 Mar '15

how do someone convert a Aria table to another engine? MyISAM and InnoDB results in the same error ___________________________________________________________ MariaDB [dbmail]> ALTER TABLE `systemevents` ENGINE = InnoDB; ERROR 1478 (HY000): Table storage engine 'InnoDB' does not support the create option 'TRANSACTIONAL=1' MariaDB [dbmail]> ALTER TABLE `systemevents` TRANSACTIONAL=0; Query OK, 0 rows affected (0.03 sec) Records: 0 Duplicates: 0 Warnings: 0 MariaDB [dbmail]> ALTER TABLE `systemevents` ENGINE = InnoDB; ERROR 1478 (HY000): Table storage engine 'InnoDB' does not support the create option 'TRANSACTIONAL=1' ___________________________________________________________ CREATE TABLE `systemevents` ( `ID` int(10) unsigned NOT NULL AUTO_INCREMENT, `DeviceReportedTime` datetime DEFAULT NULL, `FromHost` varchar(30) CHARACTER SET latin1 COLLATE latin1_german1_ci NOT NULL, `Message` text, `SysLogTag` varchar(60) DEFAULT NULL, PRIMARY KEY (`ID`), KEY `FromHost` (`FromHost`), KEY `SysLogTag` (`SysLogTag`), KEY `DeviceReportedTime` (`DeviceReportedTime`) ) ENGINE=Aria AUTO_INCREMENT=698044 DEFAULT CHARSET=utf8 PACK_KEYS=0 PAGE_CHECKSUM=0 DELAY_KEY_WRITE=1 ROW_FORMAT=PAGE TRANSACTIONAL=0

6 14

[Maria-discuss] New Question: MS-SQL Server Change tracking
by AskMonty KB 18 Mar '15

18 Mar '15

Hello, A new question has been asked in "Moving to MariaDB" by peterhorwood. Please answer it at http://mariadb.com/kb/en/ms-sql-server-change-tracking/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- I'm looking at having our product add MariaDB as a database we support. Currently we only support MS-SQL. One issue I'm wondering about is change tracking. Does MariaSQL have anything like the SQL Server (2008 and newer) Server change tracking? Or do I need to 'roll my own' using insert/update/delete triggers? -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/ms-sql-server-change-tracking/

1 0

[Maria-discuss] Sysbench compile error for MariaDB under Centos 6.4
by Fay Hou 18 Mar '15

18 Mar '15

Thank you for your time. I do see the libmysqlclient installed. []# find / -name libmysqlclient_r* /usr/lib64/libmysqlclient_r.so.15 /usr/lib64/libmysqlclient_r.so.15.0.0 /usr/lib64/libmysqlclient_r.so.16.0.0 /usr/lib64/libmysqlclient_r.so.16 /usr/lib64/libmysqlclient_r.a But, I got error when I compile "make". Any ideas? libtool: link: gcc -W -Wall -Wextra -Wpointer-arith -Wbad-function-cast -Wstrict-prototypes -Wnested-externs -Winline -funroll-loops -Wundef -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls -Wcast-align -pthread -O2 -ggdb3 -o sysbench sysbench.o sb_timer.o sb_options.o sb_logger.o db_driver.o sb_percentile.o -L/usr/local/lib tests/fileio/libsbfileio.a tests/threads/libsbthreads.a tests/memory/libsbmemory.a tests/cpu/libsbcpu.a tests/mutex/libsbmutex.a scripting/libsbscript.a drivers/mysql/libsbmysql.a -L/usr/lib64/mysql -lmysqlclient_r scripting/lua/src/liblua.a -ldl -lrt -lm -pthread /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(client.c.o): In function `mysql_get_ssl_cipher': (.text+0x2159): undefined reference to `SSL_get_current_cipher' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(client.c.o): In function `send_client_reply_packet': (.text+0x2a68): undefined reference to `SSL_get_peer_certificate' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(client.c.o): In function `send_client_reply_packet': (.text+0x2a80): undefined reference to `X509_get_subject_name' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(client.c.o): In function `send_client_reply_packet': (.text+0x2a94): undefined reference to `X509_NAME_oneline' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(client.c.o): In function `send_client_reply_packet': (.text+0x2aa3): undefined reference to `X509_free' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(client.c.o): In function `send_client_reply_packet': (.text+0x2cbc): undefined reference to `ERR_error_string_n' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(client.c.o): In function `mysql_close': (.text+0x35f4): undefined reference to `SSL_CTX_free' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(client.c.o): In function `mysql_get_ssl_cipher': (.text+0x2162): undefined reference to `SSL_CIPHER_get_name' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(mysql_async.c.o): In function `my_ssl_read_async': (.text+0xcdf): undefined reference to `SSL_read' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(mysql_async.c.o): In function `my_ssl_read_async': (.text+0xd0e): undefined reference to `SSL_get_error' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(mysql_async.c.o): In function `my_ssl_write_async': (.text+0xd8f): undefined reference to `SSL_write' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(mysql_async.c.o): In function `my_ssl_write_async': (.text+0xdbe): undefined reference to `SSL_get_error' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(vio.c.o): In function `vio_end': (.text+0x5a7): undefined reference to `ERR_remove_state' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(vio.c.o): In function `vio_end': (.text+0x5ac): undefined reference to `ERR_free_strings' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(vio.c.o): In function `vio_end': (.text+0x5b1): undefined reference to `EVP_cleanup' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(vio.c.o): In function `vio_end': (.text+0x5b7): undefined reference to `CRYPTO_cleanup_all_ex_data' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosocket.c.o): In function `vio_is_connected': (.text+0xe86): undefined reference to `SSL_pending' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0x3b): undefined reference to `SSL_new' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0x4f): undefined reference to `SSL_clear' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0x57): undefined reference to `SSL_get_session' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0x62): undefined reference to `SSL_SESSION_set_timeout' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0x6d): undefined reference to `SSL_set_fd' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0x81): undefined reference to `SSL_ctrl' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0xab): undefined reference to `SSL_get_error' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0xef): undefined reference to `SSL_get_error' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0xfc): undefined reference to `SSL_free' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0x159): undefined reference to `SSL_get_fd' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `ssl_do': (.text+0x199): undefined reference to `ERR_get_error' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `vio_ssl_read': (.text+0x1f1): undefined reference to `SSL_read' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `vio_ssl_read': (.text+0x207): undefined reference to `SSL_get_error' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `vio_ssl_write': (.text+0x2e1): undefined reference to `SSL_write' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `vio_ssl_write': (.text+0x2f7): undefined reference to `SSL_get_error' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `vio_ssl_close': (.text+0x3b8): undefined reference to `SSL_set_quiet_shutdown' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `vio_ssl_close': (.text+0x3c0): undefined reference to `SSL_shutdown' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `vio_ssl_delete': (.text+0x407): undefined reference to `SSL_free' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `sslaccept': (.text+0x447): undefined reference to `SSL_accept' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `sslconnect': (.text+0x467): undefined reference to `SSL_connect' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viossl.c.o): In function `vio_ssl_has_data': (.text+0x4ac): undefined reference to `SSL_pending' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x63): undefined reference to `SSL_load_error_strings' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x8a): undefined reference to `TLSv1_server_method' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x92): undefined reference to `SSL_CTX_new' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0xae): undefined reference to `SSL_CTX_set_cipher_list' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0xc5): undefined reference to `SSL_CTX_load_verify_locations' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0xe5): undefined reference to `SSL_CTX_set_default_verify_paths' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x103): undefined reference to `SSL_CTX_get_cert_store' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x116): undefined reference to `X509_STORE_load_locations' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x12b): undefined reference to `X509_STORE_set_flags' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x15f): undefined reference to `SSL_CTX_use_certificate_chain_file' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x17c): undefined reference to `SSL_CTX_use_PrivateKey_file' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x191): undefined reference to `SSL_CTX_check_private_key' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x19e): undefined reference to `DH_new' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x1b9): undefined reference to `BN_bin2bn' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x1d1): undefined reference to `BN_bin2bn' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x1fd): undefined reference to `SSL_CTX_ctrl' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x205): undefined reference to `DH_free' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x221): undefined reference to `TLSv1_client_method' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x268): undefined reference to `SSL_library_init' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x26d): undefined reference to `OPENSSL_add_all_algorithms_noconf' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x2d6): undefined reference to `ERR_get_error_line_data' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x2e3): undefined reference to `SSL_CTX_free' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x32d): undefined reference to `ERR_get_error_line_data' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x3ad): undefined reference to `ERR_get_error_line_data' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x42d): undefined reference to `ERR_get_error_line_data' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x465): undefined reference to `ERR_get_error_line_data' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x47a): undefined reference to `DH_free' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLFd': (.text+0x4ad): undefined reference to `ERR_get_error_line_data' /usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libmysqlclient_r.a(viosslfactories.c.o): In function `new_VioSSLConnectorFd': (.text+0x514): undefined reference to `SSL_CTX_set_verify' under Centos 6.4

3 5

[Maria-discuss] Error Message spelling mistake
by Rhys Campbell 16 Mar '15

16 Mar '15

I feel like a bit of a pedant reporting this... "Last_IO_Error: Got fatal error 1236 from master when reading data from binary log: 'Error: connecting slave requested to start from GTID 1-1-7, which is not in the master's binlog. Since the master's binlog contains GTIDs with higher sequence numbers, it probably means that the slave has diverged due to executing extra errorneous transactions'" Errorneous should be erroneous Rhys Campbell Database Administrator TradingScreen, Inc. 23 York House, 5th Floor London WC2B 6UJ Email: rhys.james.campbell(a)googlemail.com<mailto:rhys.james.campbell@googlemail.com> Follow TradingScreen on Twitter<http://twitter.com/#!/TradingScreen> , Facebook<http://www.facebook.com/pages/TradingScreen/214046251945650> and our blog Trading Smarter<tradingsmarter.tradingscreen.com> This message is intended only for the recipient(s) named above and may contain confidential information. If you are not an intended recipient, you should not review, distribute or copy this message. Please notify the sender immediately by e-mail if you have received this message in error and delete it from your system.

3 2

[Maria-discuss] Stored Procedure debugger from Peter Gulutzan and Trudy Pelzer
by Alexander Barkov 13 Mar '15

13 Mar '15

Hi, Peter Gulutzan and Trudy Pelzer announced their GUI debugger for stored procedures. Sources, binaries and a demo are available here: http://ocelot.ca/blog/blog/2015/03/02/the-ocelotgui-debugger/ This is a great news. Greetings.

5 8

[Maria-discuss] Enabling feedback pluging for MariaDB 10.1.4
by Michael Widenius 12 Mar '15

12 Mar '15

Hi! We had originally planned to enable the feedback plugin by default for the Alpha and Beta stages of MariaDB 10.1, but we forgot to do this for the alpha so I suggested Sergei today that we should enable it for the beta period of MariaDB 10.0 We agreed that before doing this we would have a discussion on the maria developer list to explain why we would like to do this. The reason we would like to enable it is to get information about which features people are testing and using in MariaDB 10.1, so that we can concentrate our testing and bug fixing during the beta phase for those areas that people are actually using. This would help our development work a lot and would also help us to plan for MariaDB 10.2 development. Anyone will be able to disable the feedback plugin by adding: --feedback=OFF to their my.cnf file. In MariaDB 10.1 gamma/release we would make it default OFF again. We will of course inform everyone about this change, including how to disable the feedback, in the MariaDB changelog and release notes. We do of course hope that as many as possible will have it on, even after gamma, to help us with our development work! Information about the MariaDB feedback plugin and the statistics it provides can be found at: http://mariadb.org/feedback_plugin https://mariadb.com/kb/feedback-plugin As most MariaDB users should know, the feedback is totally anonymous and no private or sensitive information is being sent. Any comments, suggestions or recommendations? Regards, Michael Widenius Creator of MySQL and MariaDB

12 19

[Maria-discuss] MariaDB Galera Cluster 10.0.17 and 5.5.42 now available
by Daniel Bartholomew 11 Mar '15

11 Mar '15

The MariaDB project is pleased to announce the immediate availability of MariaDB Galera Cluster 10.0.17 & 5.5.42 Both are Stable (GA) releases. See the Release Notes and Changelog for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB Galera Cluster 10.0.17 - Release Notes: https://mariadb.com/kb/en/mariadb-galera-cluster-10017-release-notes/ - Changelog: https://mariadb.com/kb/en/mariadb-galera-cluster-10017-changelog/ - Downloads: https://downloads.mariadb.org/mariadb-galera/10.0.17 MariaDB Galera Cluster 5.5.42 - Release Notes: https://mariadb.com/kb/en/mariadb-galera-cluster-5542-release-notes/ - Changelog: https://mariadb.com/kb/en/mariadb-galera-cluster-5542-changelog/ - Downloads: https://downloads.mariadb.org/mariadb-galera/5.5.42 About MariaDB Galera Cluster: - https://mariadb.com/kb/en/what-is-mariadb-galera-cluster/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/en/donate/ - http://www.cafepress.com/mariadb We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

1 0

[Maria-discuss] GSOC 2015 :UDFs returning arrays
by Delveri chick 11 Mar '15

11 Mar '15

Hi My name is Blessing Atie and i would love to participate in the Google summer of code 2015 under Mariadb. I am interested in the project UDF returning arrays. I have build mariadb from source and and i also ran the test suites. I am currently studing the sql/sql.** files to understand UDF's and i also downloaded some ebook on mysql internals and mysql plugin development which im reading while hoping to find a breakthrough on this project in them. I would love to know if there are any bugs related to this task on JIRA I could work on as a means of preparing for the project. Please give me the link. Regards

5 14

[Maria-discuss] New Question: Looking for a stable version of ODBC connector for Linux
by AskMonty KB 05 Mar '15

05 Mar '15

Hello, A new question has been asked in "MariaDB Connector/ODBC" by namkyungkim. Please answer it at http://mariadb.com/kb/en/looking-for-a-stable-version-of-odbc-connector-for… as the person asking the question may not be subscribed to the mailing list. -------------------------------- Hi all, I am looking for a stable version of ODBC connector for Linux. I am kindly asking you when I can have a chance to download it. Thank you and regards, -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/looking-for-a-stable-version-of-odbc-connector-for…

1 0

[Maria-discuss] mariadb 10.0.17 keeps crashing
by Gabriel Sosa 04 Mar '15

04 Mar '15

Hello, I've been a proudly user of mariadb 5.5.x for a long time now but given the nice feature setI decided to give mariadb 10.x a try. I took one of our current slaves running mariadb 5.5.x (on centos 6.5) and followed the upgrade steps using yum and ran *mysql_upgrade*. The upgrade ran without any trouble...then I moved a huge table (about 1B records right now) from InnoDB to TokuDB. Now, every couple of hours I find that the replication is far behind the master and the reason is because this server keeps checking tables marked as crashed.... I can't seems to find any indicator of OOM killer in the system logs NOR anything related to that in the mysql log, the only clue I have is: --------------- *150303 10:08:57 mysqld_safe Number of processes running now: 0* *150303 10:08:57 mysqld_safe mysqld restarted* 150303 10:08:58 [Warning] 'THREAD_CONCURRENCY' is deprecated and will be removed in a future release. 150303 10:08:59 [Warning] option 'innodb-status-file': boolean value 'ib_status' wasn't recognized. Set to OFF. 150303 10:08:59 [Warning] option 'innodb-autoextend-increment': unsigned value 10485760 adjusted to 1000 150303 10:08:59 [Note] InnoDB: Using mutexes to ref count buffer pool pages 150303 10:08:59 [Note] InnoDB: The InnoDB memory heap is disabled 150303 10:08:59 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 150303 10:08:59 [Note] InnoDB: Memory barrier is not used 150303 10:08:59 [Note] InnoDB: Compressed tables use zlib 1.2.3 150303 10:08:59 [Note] InnoDB: Using Linux native AIO 150303 10:08:59 [Note] InnoDB: Using CPU crc32 instructions 150303 10:08:59 [Note] InnoDB: Initializing buffer pool, size = 6.0G 150303 10:08:59 [Note] InnoDB: Completed initialization of buffer pool 150303 10:08:59 [Note] InnoDB: Highest supported file format is Barracuda. 150303 10:08:59 [Note] InnoDB: Log scan progressed past the checkpoint lsn 14178608217047 150303 10:08:59 [Note] InnoDB: Database was not shutdown normally! 150303 10:08:59 [Note] InnoDB: Starting crash recovery. 150303 10:08:59 [Note] InnoDB: Reading tablespace information from the .ibd files... 150303 10:09:05 [Note] InnoDB: Restoring possible half-written data pages 150303 10:09:05 [Note] InnoDB: from the doublewrite buffer... InnoDB: Doing recovery: scanned up to log sequence number 14178613459456 InnoDB: Doing recovery: scanned up to log sequence number 14178618702336 InnoDB: Doing recovery: scanned up to log sequence number 14178623945216 InnoDB: Doing recovery: scanned up to log sequence number 14178629188096 InnoDB: Doing recovery: scanned up to log sequence number 14178634430976 InnoDB: Doing recovery: scanned up to log sequence number 14178639673856 InnoDB: Doing recovery: scanned up to log sequence number 14178644916736 ...... ...... ...... ...... 150303 10:09:14 [Note] InnoDB: Starting an apply batch of log records to the database... InnoDB: Progress in percent: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 InnoDB: Apply batch completed InnoDB: In a MySQL replication slave the last master binlog file InnoDB: position 0 16433109, file name slave-bin.852141 InnoDB: Last MySQL binlog file position 0 16784214, file name /var/lib/mysql/log/bin/slave-bin.005211 150303 10:09:34 [Note] InnoDB: 128 rollback segment(s) are active. 150303 10:09:34 [Note] InnoDB: Waiting for purge to start 150303 10:09:34 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.22-72.0 started; log sequence number 14178834821658 Tue Mar 3 10:09:36 2015 TokuFT recovery starting in env /var/lib/mysql/data/ Tue Mar 3 10:09:36 2015 TokuFT recovery scanning backward from 1330297 Tue Mar 3 10:09:36 2015 TokuFT recovery bw_end_checkpoint at 1330297 timestamp 1425395277901416 xid 1330281 (bw_newer) Tue Mar 3 10:09:36 2015 TokuFT recovery bw_begin_checkpoint at 1330281 timestamp 1425395273487081 (bw_between) Tue Mar 3 10:09:36 2015 TokuFT recovery turning around at begin checkpoint 1330281 time 4414335 Tue Mar 3 10:09:36 2015 TokuFT recovery starts scanning forward to 1330297 from 1330281 left 16 (fw_between) Tue Mar 3 10:09:36 2015 TokuFT recovery closing 14 dictionaries Tue Mar 3 10:09:36 2015 TokuFT recovery making a checkpoint Tue Mar 3 10:09:36 2015 TokuFT recovery done 150303 10:09:36 [Note] Recovering after a crash using /var/lib/mysql/log/bin/slave-bin --------------- The odd thing is that the 5.5.x version was working just fine (since about a year) in the same hardware...nothing changed in that front. Any clue? Thank you in advance

4 9

[Maria-discuss] Questions on image data should be stored in database or not?
by Peter Boston 04 Mar '15

04 Mar '15

I don't know the following questions are valid here or not. I just hope I get some help from experienced experts here. I am planning to use MariaDB on 64bit Linux for a new medical application project. I have to store lots of images. The size of one image is about 263KB. There are about 50 images per patient. It's about 14MB. I have two options here for these image data: Option A: store them in file system and have their location linked in database table; Option B: store them in database in a separated table as BOLB with a unique id; I know there are lots of implementations go with Option A. My concern about Option A is the security and backup. I have to do them separately. Do you have any good idea how to do them? For Option B, I am worry about the size of that table and the database. I read somewhere saying the BOLB and TEXT columns in a table are not stored "inline" and will not be counted to the table size. Where I can find the detailed information about this? Oracle has a special way to handle this situation and is pushing save images into database. Is there a similar mechanism in MariaDB? How about compress a series of images for a patient in Option B? Is it worthy to scarify perform for gaining some spaces? Eventually the data size will be very big, what are the options for me to cleanup and archive old data, including the image data? Thanks, Peter

3 4

[Maria-discuss] stored programs
by Federico Razzoli 04 Mar '15

04 Mar '15

Reading 10.0.3 release notes: https://mariadb.com/kb/en/mariadb/mariadb-1013-release-notes/ I see that IF EXISTS, IF NOT EXISTS and OR REPLACE are now almost consistent. "Almost" means that... OR REPLACE still doesn't apply to stored procedures, functions, triggers, events. Recently, during a public session, a PostgreSQL user asked me if MariaDB supports stored procedures - in his opinion, MySQL doesn't, no matter what the manual says. Unfortunately my answer was that MariaDB support for stored procedure is the same as MySQL ("so the answer is no", he said). I feel that these features are generally ignored. I don't understand the reason. While they have many problems in MariaDB/MySQL, some people still tries to use them. Even more people would use them if some developement was made on them. They are also used by important projects like Common Schema and Flexviews, but I'm sure that the authors have to struggle against limitations every time they change a line of code. I struggled hards for a much easier project - an SQL unit test tool. I have several problems in mind: performance, lack of variable number of arguments, cannot prepare a statement from a local variable, no debugger, no way to see the call stack... I'm writing this because I love MariaDB. This is not a hateful criticism: this is a request for something I waited for many years. I hope that you will keep procedures in mind, while planning the next major release. Regards Federico

6 40

[Maria-discuss] MaxScale Multiple Masters
by Riz Plate 03 Mar '15

03 Mar '15

Hi I have a very basic scenario, we have one database which is running out of space. database have some tables with incremental primary key ids. 1- for new ids , we want to send read/write to new server and preferably , do id based statement routing i.e. if id%2=0 push to new-server1 , else read/write to new-server2. 2- some tables are created dynamically i.e. dynamic_table_123. we want to send 123%2=0 to new-server1 else read/write to new-server2. 3- all statements in above #1, #2 should go to same MaxScale abstraction i.e. application should not have logic for routing. Can we do this with MaxsScale? what are the configuraion readwriterouter or the cluster? Thanks for your insight and recommendations. Thanks

1 0

[Maria-discuss] New Question: ResultSetMetaData getColumnClassName accuracy for JDBC
by AskMonty KB 02 Mar '15

02 Mar '15

Hello, A new question has been asked in "Client Libraries" by tommy_pham_g. Please answer it at http://mariadb.com/kb/en/resultsetmetadata-getcolumnclassname-accuracy-for-… as the person asking the question may not be subscribed to the mailing list. -------------------------------- Hi folks, I'm having problems getting the getColumnClassName to return the correct information. I have a sample table: CREATE TABLE `datatypes` ( `mariadb_binary` binary(8) NULL, `mariadb_blob` blob NULL, `mariadb_boolean` tinyint(1) NULL, `mariadb_varbinary` varbinary(16) NULL, `mariadb_varchar` varchar(5) CHARACTER SET utf8 NULL, UNIQUE KEY `mariadb_serial` (`mariadb_serial`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci; The ResultSetMetaData is not returning accurate GetColumnClassName information for some of the above columns: [INFO ] 2015-03-02 09:26:52.905 [main] c.d.d.AppDbTest.main - getColumnName mariadb_binary | getColumnLabel mariadb_binary. getColumnClassName [B. getColumnDisplaySize 8. getColumnType -2. getColumnTypeName BINARY. [INFO ] 2015-03-02 09:26:52.905 [main] c.d.d.AppDbTest.main - getColumnName mariadb_blob | getColumnLabel mariadb_blob. getColumnClassName [B. getColumnDisplaySize 65535. getColumnType -4. getColumnTypeName BLOB. [INFO ] 2015-03-02 09:26:52.905 [main] c.d.d.AppDbTest.main - getColumnName mariadb_boolean | getColumnLabel mariadb_boolean. getColumnClassName java.lang.Boolean. getColumnDisplaySize 1. getColumnType -7. getColumnTypeName TINYINT. getPrecision 1. [INFO ] 2015-03-02 09:26:52.998 [main] c.d.d.AppDbTest.main - getColumnName mariadb_varbinary | getColumnLabel mariadb_varbinary. getColumnClassName [B. getColumnDisplaySize 16. getColumnType -3. getColumnTypeName VARBINARY. getPrecision 16. [INFO ] 2015-03-02 09:26:53.014 [main] c.d.d.AppDbTest.main - getColumnName mariadb_varchar | getColumnLabel mariadb_varchar. getColumnClassName java.lang.String. getColumnDisplaySize 5. getColumnType 12. getColumnTypeName VARCHAR. getPrecision 5. Is the above by design? Is it bug within JDBC spec? I'm using MariaDB JDBC version 1.1.8. Thanks, Tommy -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/resultsetmetadata-getcolumnclassname-accuracy-for-…

1 0

[Maria-discuss] Serious problem with latest (10.0.16) Windows installer - destroys services.
by Peter Laursen 02 Mar '15

02 Mar '15

I have MariaDB 5.5, 10.0 and 10.1 installed (as Windows services named 'maria55'. 'maria10' and 'maria10_1' ) and always update them to latest soon after an update is available. Yesterday morning I installed 10.0.16 on top of 10.0.15 using the .msi installer. When I tried to connect to it a few hours later it was not possible. I thought the service might not be running. It wasn't. Actually it did not exist anymore at all! "net start maria10" returned "service does not exist" (and indeed it did not appear in Windows "services management" interface). I copied the /datadir, uninstalle , did a fresh install of 10.0.16d (choosing the option not to upgrade any existing server) and copied the old /datadir back. Now Maria 10.0(.16) works again. But now I see that the 'maria55' service is also gone from the system. Files are intact. I can repeat the exercise I did with 10.0 of course or install service again from commandline. Not a big problem, but very annoying and waste of time. MariaDB 10.1 installaton is not affected. 5 diiferent Oracle/MySQL servers (from 5.0 to 5.7) also are not. I need all those instances for application testing. Questions: * Has somebody else experienced this? * Has somebody replaced @wlad as maintainer of Windows installers? @wlad was the only person who ever was able to write reasonable MySQL/MariaDB installers. So I would regret that. It is perfectly legal on Windows to have multiple MariaDB servers simultaneously running as Windows services. They won't conflict as long as service name, port, basedir and datadir are all different. What happens with one should not affect another. I the installer does not respect this, it is a bug. -- Peter -- Webyog

5 10

[Maria-discuss] MariaDB 10.0.17 and 10.1.3 released
by Daniel Bartholomew 02 Mar '15

02 Mar '15

The MariaDB project is pleased to announce the immediate availability of MariaDB 10.0.17 & 10.1.3 MariaDB 10.0.17 is a Stable (GA) release. MariaDB 10.1.3 is a Beta release. See the Release Notes and Changelog for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB 10.0.17 - Release Notes: https://mariadb.com/kb/en/mariadb-10017-release-notes - Changelog: https://mariadb.com/kb/en/mariadb-10017-changelog - Downloads: https://downloads.mariadb.org/mariadb/10.0.17 About MariaDB 10.0: - https://mariadb.com/kb/en/what-is-mariadb-100/ MariaDB 10.1.3 - Release Notes: https://mariadb.com/kb/en/mariadb-1013-release-notes - Changelog: https://mariadb.com/kb/en/mariadb-1013-changelog - Downloads: https://downloads.mariadb.org/mariadb/10.1.3 About MariaDB 10.1: - https://mariadb.com/kb/en/what-is-mariadb-101/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/en/donate/ - http://www.cafepress.com/mariadb We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

1 0

[Maria-discuss] Giving up on dynamic columns
by Tom Worster 02 Mar '15

02 Mar '15

I discovered this showstopper on Friday while working with real data in development of a new app. I managed to narrow it down today and filed the bug report. https://mariadb.atlassian.net/browse/MDEV-7650 Looks like Maria saves an illegally formatted dyncol string if a dynamic column is longer than 64kB and is not alphabetically last by name among the dynamic column in the blob. Tbh, even is this were fixed tomorrow so I could proceed with my work, I'm not sure I would use dyncols. My confidence in the feature has been shaken. It's a pity because the Active Record ORM extension I wrote was working. Tom

4 6

[Maria-discuss] myisam_use_mmap unstable in MariaDB 10.0.x
by Reindl Harald 01 Mar '15

01 Mar '15

historical: http://lists.mysql.com/mysql/226361 after it turned out to be stable in 2013/2014 upgrade to MariaDB 10.0.17 yesterday and the logs started with "table corrupt", "table not closed properly" and so on for tables which where not only read this time not with 'mysqld got signal 11' but "only" corrupted MyISAM files and after disable 'myisam_use_mmap' all is clean and stable over hours BTW a 'repair table' don't delete the TMM file leading in a 'optimize table' later failing until you delete the file manually from disk __________________________________________________________________ this configuration is unchanged for years and so my only conclusion is that Oracle managed to kill the feature again, this is also confirmed for Percona Server 5.6 where even queries fail confirmed from another sysadmin which found out that playing with my settings leaded to problems while here MariaDB 5.5.x was in use and hence no troubles - given that 'myisam_use_mmap' is borked at MariaDB 10.x and Percona 5.6 it's likely a backport from MySQL 5.6 delay-key-write = ALL concurrent_insert = 2 open-files-limit = 750000 myisam-recover-options = "FORCE" myisam_use_mmap = 0 wait_timeout = 300 interactive_timeout = 300 max_allowed_packet = 200M max_connections = 500 max_tmp_tables = 150 max_connect_errors = 250 max_delayed_threads = 32 flush_time = 0 query_cache_limit = 256K query_cache_min_res_unit = 1K query_cache_size = 1280M query_cache_type = 1 table_cache = 10000 table_definition_cache = 10000 thread_cache_size = 400 tmp_table_size = 256M max_heap_table_size = 256M key_buffer_size = 256M sort_buffer_size = 256K myisam_sort_buffer_size = 15M join_buffer_size = 1M preload_buffer_size = 128K read_buffer_size = 128K read_rnd_buffer_size = 128K

1 0

[Maria-discuss] warning from binary tarball file installation.
by Peter Boston 28 Feb '15

28 Feb '15

I am installing mariadb-10.0.15 on Fedora 20 from a binary tarball file. After several changes on .my.cnf file, I minimized the installation warning to three. I am using the default my-large.cnf file from the release. How can I eliminate them, particularly the last one: Failed to load slave replication state from table mysql.gtid_slave_pos: 1146: Table 'mysql.gtid_slave_pos' doesn't exist. Thanks, [root@dev2 mysql]# ./scripts/mysql_install_db --defaults-file=~/.my.cnf --user=mysql Installing MariaDB/MySQL system tables in './data' ... 150225 10:37:35 [Note] InnoDB: Using mutexes to ref count buffer pool pages 150225 10:37:35 [Note] InnoDB: The InnoDB memory heap is disabled 150225 10:37:35 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 150225 10:37:35 [Note] InnoDB: Memory barrier is not used 150225 10:37:35 [Note] InnoDB: Compressed tables use zlib 1.2.3 150225 10:37:35 [Note] InnoDB: Using Linux native AIO 150225 10:37:35 [Note] InnoDB: Not using CPU crc32 instructions 150225 10:37:35 [Note] InnoDB: Initializing buffer pool, size = 384.0M 150225 10:37:35 [Note] InnoDB: Completed initialization of buffer pool 150225 10:37:35 [Note] InnoDB: The first specified data file /usr/local/mysql/data/ibdata1 did not exist: a new database to be created! 150225 10:37:35 [Note] InnoDB: Setting file /usr/local/mysql/data/ibdata1 size to 2000 MB 150225 10:37:35 [Note] InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 150225 10:37:42 [Note] InnoDB: Data file /usr/local/mysql/data/ibdata2 did not exist: new to be created 150225 10:37:42 [Note] InnoDB: Setting file /usr/local/mysql/data/ibdata2 size to 10 MB 150225 10:37:42 [Note] InnoDB: Database physically writes the file full: wait... 150225 10:37:42 [Note] InnoDB: Setting log file /usr/local/mysql/data/ib_logfile101 size to 100 MB InnoDB: Progress in MB: 100 150225 10:37:43 [Note] InnoDB: Setting log file /usr/local/mysql/data/ib_logfile1 size to 100 MB InnoDB: Progress in MB: 100 150225 10:37:43 [Note] InnoDB: Renaming log file /usr/local/mysql/data/ib_logfile101 to /usr/local/mysql/data/ib_logfile0 150225 10:37:43 [Warning] InnoDB: New log files created, LSN=45782 150225 10:37:43 [Note] InnoDB: Doublewrite buffer not found: creating new 150225 10:37:43 [Note] InnoDB: Doublewrite buffer created 150225 10:37:43 [Note] InnoDB: 128 rollback segment(s) are active. 150225 10:37:43 [Warning] InnoDB: Creating foreign key constraint system tables. 150225 10:37:43 [Note] InnoDB: Foreign key constraint system tables created 150225 10:37:43 [Note] InnoDB: Creating tablespace and datafile system tables. 150225 10:37:43 [Note] InnoDB: Tablespace and datafile system tables created. 150225 10:37:43 [Note] InnoDB: Waiting for purge to start 150225 10:37:43 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.21-70.0 started; log sequence number 0 150225 10:37:43 [Warning] Failed to load slave replication state from table mysql.gtid_slave_pos: 1146: Table 'mysql.gtid_slave_pos' doesn't exist 150225 10:37:43 [Note] InnoDB: FTS optimize thread exiting. 150225 10:37:43 [Note] InnoDB: Starting shutdown... 150225 10:37:45 [Note] InnoDB: Shutdown completed; log sequence number 1616698 OK Filling help tables... 150225 10:37:45 [Note] InnoDB: Using mutexes to ref count buffer pool pages 150225 10:37:45 [Note] InnoDB: The InnoDB memory heap is disabled 150225 10:37:45 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 150225 10:37:45 [Note] InnoDB: Memory barrier is not used 150225 10:37:45 [Note] InnoDB: Compressed tables use zlib 1.2.3 150225 10:37:45 [Note] InnoDB: Using Linux native AIO 150225 10:37:45 [Note] InnoDB: Not using CPU crc32 instructions 150225 10:37:45 [Note] InnoDB: Initializing buffer pool, size = 384.0M 150225 10:37:45 [Note] InnoDB: Completed initialization of buffer pool 150225 10:37:45 [Note] InnoDB: Highest supported file format is Barracuda. 150225 10:37:45 [Note] InnoDB: 128 rollback segment(s) are active. 150225 10:37:45 [Note] InnoDB: Waiting for purge to start 150225 10:37:45 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.21-70.0 started; log sequence number 1616698 150225 10:37:46 [Note] InnoDB: FTS optimize thread exiting. 150225 10:37:46 [Note] InnoDB: Starting shutdown... 150225 10:37:48 [Note] InnoDB: Shutdown completed; log sequence number 1616708 OK

2 1

[Maria-discuss] Default privileges for anon. user.
by dE 26 Feb '15

26 Feb '15

Hi! I've realized that by default MariaDB allow full access to a database for anon. users. $ mysql --user asdfasdf test MariaDB [test]> insert into test (sr) values (1); Query OK, 1 row affected (0.12 sec) I tried to revoke but -- Revoke all on test.test from ''@''; ERROR 1141 (42000): There is no such grant defined for user '' on host '%' Is there anyway to disallow all types of access to anon. users?

2 2

[Maria-discuss] questions from a new user
by Peter Boston 25 Feb '15

25 Feb '15

I am new to use mariadb on linux machine. I am using Fedora 20 and I have downloaded the mariadb 10.0.15 tar.gz file and its instruction. I removed the existing mariadb from my Fedora 20. I have installed the mariadb on my machine by following the official instruction. It seems successful (without error) but I cannot start it as expected. I also have few other basic questions. Some background information here: this database will be accessed by a local application. This local application may be running under a general user account, user1. I installed it in /var/local as a root user. Questions: 1. How to uninstall it completely? I want to try again to see if I did anything wrong before. 2. Because it will be accessed by a local application and the local application will be running by a general user, user1, should I install it with user1? 3. Basically I am confused with these three users: user1, mysql and root. "user1" will be used to run the application and login the machine. "mysql" will be used to connect the mariadb. "root" will be used to install mariadb into /usr/local. Who will start the mariadb? It will be "root", I guess. But if "root" starts the service, "user1" and "mysql" don't have problem to access its resources? 4. If I don't want to install it as root, can I still install it under the /usr/local directory? 5. I renamed the my-large.cnf to .my.cnf and uncomment the InnoDB table section. Is this only change I need to make if I want to use InnoDB? should I disable the myisam? how? 6. where should I put the .my.cnf file? put into the home directory of the user who starts the mariadb or the user who logon the system if they are different? 7. there is a my.cnf file from the Fedora 20 installation, when I start mariadb without the "--defaults-file=~/.my.cnf" option, I will get the following error from the log: [ERROR] mysqld: Can't create/write to file '/var/run/mysqld/mysqld.pid' (Errcode: 2 "No such file or directory") I have to manually create the mysqld folder inside the /var/run folder each time after reboot. how to avoid this? 8. After started with that "old" my.cnf, I try to stop the mariadb but cannot because I cannot find its service name: [user1@dev2 mysql]$ ./bin/mysqladmin -u root -p status Enter password: Uptime: 685 Threads: 1 Questions: 3 Slow queries: 0 Opens: 0 Flush tables: 1 Open tables: 62 Queries per second avg: 0.004 [user1@dev2 mysql]$ sudo systemctl status mariadb.service mariadb.service Loaded: not-found (Reason: No such file or directory) Active: inactive (dead) [user1@dev2 mysql]$ sudo systemctl status mysql.service mysql.service Loaded: not-found (Reason: No such file or directory) Active: inactive (dead) [user1@dev2 mysql]$ sudo systemctl status mysqld.service mysqld.service Loaded: not-found (Reason: No such file or directory) Active: inactive (dead) how stop it? 9. if I start mariadb with the renamed my-large.cnf ([root@dev2 mysql]# ./bin/mysqld_safe --defaults-file=~/.my.cnf --user=mysql), I got the following error: 150225 0:09:28 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 150225 0:09:28 [Note] Recovering after a crash using mysql-bin 150225 0:09:28 [Note] Starting crash recovery... 150225 0:09:28 [Note] Crash recovery finished. 150225 0:09:28 [Warning] Failed to load slave replication state from table mysql.gtid_slave_pos: 1146: Table 'mysql.gtid_slave_pos' doesn't exist 150225 0:09:28 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist 150225 0:09:28 [Note] Server socket created on IP: '::'. 150225 0:09:28 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.user' doesn't exist 150225 00:09:28 mysqld_safe mysqld from pid file /usr/local/mysql/data/dev2.pid ended Then I try do upgrade as suggested above: [root@dev2 mysql]# ./bin/mysql_upgrade Version check failed. Got the following error when calling the 'mysql' command line client ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2 "No such file or directory") FATAL ERROR: Upgrade failed so I think I need to make the mariadb running first, I use above 7 to make server running and then do upgrade, I got the following errors: [user1@dev2 mariadb-10.0.15-linux-x86_64]$ sudo ./bin/mysql_upgrade [sudo] password for user1: Phase 1/5: Checking mysql database Processing databases mysql mysql.column_stats OK mysql.columns_priv OK mysql.db OK mysql.event OK mysql.func OK mysql.gtid_slave_pos Error : Table 'mysql.gtid_slave_pos' doesn't exist in engine status : Operation failed mysql.help_category OK mysql.help_keyword OK mysql.help_relation OK mysql.help_topic OK mysql.host OK mysql.index_stats OK mysql.innodb_index_stats Error : Table 'mysql.innodb_index_stats' doesn't exist in engine status : Operation failed mysql.innodb_table_stats Error : Table 'mysql.innodb_table_stats' doesn't exist in engine status : Operation failed mysql.plugin OK mysql.proc OK mysql.procs_priv OK mysql.proxies_priv OK mysql.roles_mapping OK mysql.servers OK mysql.table_stats OK mysql.tables_priv OK mysql.time_zone OK mysql.time_zone_leap_second OK mysql.time_zone_name OK mysql.time_zone_transition OK mysql.time_zone_transition_type OK mysql.user OK Repairing tables mysql.gtid_slave_pos Error : Table 'mysql.gtid_slave_pos' doesn't exist in engine status : Operation failed mysql.innodb_index_stats Error : Table 'mysql.innodb_index_stats' doesn't exist in engine status : Operation failed mysql.innodb_table_stats Error : Table 'mysql.innodb_table_stats' doesn't exist in engine status : Operation failed Phase 2/5: Running 'mysql_fix_privilege_tables'... ERROR 1932 (42S02) at line 580: Table 'mysql.innodb_index_stats' doesn't exist in engine ERROR 1932 (42S02) at line 583: Table 'mysql.innodb_table_stats' doesn't exist in engine FATAL ERROR: Upgrade failed why I cannot run mariadb with the my.cnf which comes with this version of mariadb? The old my.cnf doesn't have innoDB section and I cannot enable it. Is this the reason? does the Fedora 20 support mariadb 10.0.15? Thanks, Peter

3 4

[Maria-discuss] New Question: other connectors
by AskMonty KB 24 Feb '15

24 Feb '15

Hello, A new question has been asked in "Client Libraries" by ferreirah. Please answer it at http://mariadb.com/kb/en/other-connectors/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- Hi, Any plans for connectors for the dot net framework? H.F. -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/other-connectors/

1 0

[Maria-discuss] SHOW GRANTS: MySQL vs. MariaDB
by Felipe Gasper 24 Feb '15

24 Feb '15

Hi all, We have custom logic in place that “suspends” a MySQL user by: - reversing the password hash - replacing the leading “*” with “-” In other words (pseudo-code): my $hash = SELECT password FROM mysql.user WHERE user = 'theuser'; $hash = $hash.replace(/^\*/,"").reverse(); UPDATE mysql.user SET password = "-$hash" WHERE user = 'theuser'; I have noticed that MySQL’s SHOW GRANTS reports these “suspended” password hashes with the leading dash “fixed” to a leading asterisk. MariaDB 10, though, has SHOW GRANTS report the literal contents of mysql.user. Is this behavior by design in MariaDB 10? Is it behavior that we can depend on moving forward? -FG

2 1

[Maria-discuss] Dependency questions regarding MariaDB 10 on CentOS6.5 with local mirror of repo
by Sophie L 23 Feb '15

23 Feb '15

Hi everybody, I mirrored MariaDB repo,but noticed servers had unmet dependencies when I tried to install. I have this message: Error: Package: MariaDB-client-10.0.16-1.fc20.x86_64 (mariadb) Error: Package: MariaDB-client-10.0.16-1.fc20.x86_64 (mariadb) Requires: libstdc++.so.6(GLIBCXX_3.4.15)(64bit) Error: Package: galera-25.3.5-1.sles12.x86_64 (mariadb) Requires: libssl.so.1.0.0()(64bit) Error: Package: galera-25.3.5-1.sles12.x86_64 (mariadb) Requires: libcrypto.so.1.0.0()(64bit) Error: Package: MariaDB-Galera-server-10.0.16-1.fc20.x86_64 (mariadb) Requires: libstdc++.so.6(GLIBCXX_3.4.15)(64bit) Error: Package: MariaDB-client-10.0.16-1.fc20.x86_64 (mariadb) Requires: libc.so.6(GLIBC_2.17)(64bit) Error: Package: MariaDB-client-10.0.16-1.fc20.x86_64 (mariadb) Requires: libc.so.6(GLIBC_2.14)(64bit) Error: Package: MariaDB-Galera-server-10.0.16-1.fc20.x86_64 (mariadb) Requires: libc.so.6(GLIBC_2.17)(64bit) Error: Package: MariaDB-Galera-server-10.0.16-1.fc20.x86_64 (mariadb) Requires: libc.so.6(GLIBC_2.15)(64bit) Error: Package: MariaDB-Galera-server-10.0.16-1.fc20.x86_64 (mariadb) Requires: libc.so.6(GLIBC_2.14)(64bit) Error: Package: galera-25.3.5-1.sles12.x86_64 (mariadb) Requires: libc.so.6(GLIBC_2.14)(64bit) Error: Package: galera-25.3.5-1.sles12.x86_64 (mariadb) Requires: aaa_base Error: Package: galera-25.3.5-1.sles12.x86_64 (mariadb) Requires: libstdc++.so.6(GLIBCXX_3.4.15)(64bit) My server has libstdc++ 4.4.7. Can MariaDb 10 run with this recent version? My apologies if this is not specific to MariaDB. Maybe it it. Would somebody give me some advice? Kind regards, Sophie. Some details, Linux maria1 2.6.32-431.5.1.el6.x86_64 #1 SMP Wed Feb 12 00:41:43 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/centos-release CentOS release 6.5 (Final) # locate libstdc++.so.6 /usr/lib64/libstdc++.so.6 /usr/lib64/libstdc++.so.6.0.13 # locate libc.so.6 /lib64/libc.so.6 Installed Packages Name : libstdc++ Arch : x86_64 Version : 4.4.7 Release : 4.el6 Size : 964 k Repo : installed >From repo : anaconda-CentOS-201311291202.x86_64

3 4

[Maria-discuss] Mariadb galera tolerance to network and io latency
by Lyle Franklin 21 Feb '15

21 Feb '15

Recently we observed that when network and IO latency increased significantly (and correspondingly, that bandwidth reduced significantly) all nodes in a 3-node mariadb galera cluster reported the other nodes as partitioned. We understand that by default galera is configured to wait 6 seconds before declaring other nodes partitioned. Is there any additional documentation on the performance on mariadb/galera with respect to network/IO latency and bandwidth? Are there hard limits beyond which a cluster is known to fail, and soft limits which are known to degrade performance? Thanks, Rob and Lyle Cloud Foundry Core Services

1 0

[Maria-discuss] New Question: Replication with 2 different minor version
by AskMonty KB 20 Feb '15

20 Feb '15

Hello, A new question has been asked in "Standard Replication" by micimici. Please answer it at http://mariadb.com/kb/en/replication-with-2-different-minor-version/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- Hallo Support I have a question about replication As source... I have MariaDB 5.5.37 and destination is 5.5.41 Do you know if replication will work with those 2 different versions ? thanks for any info -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/replication-with-2-different-minor-version/

1 0

[Maria-discuss] R: Re: R: Re: R: Re: Switch from rsync to xtrabackup
by absolutely_free＠libero.it 18 Feb '15

18 Feb '15

Ok, thank you all, switch to xtrabackup-v2 accomplished :)

2 1

Re: [Maria-discuss] MariaDB 10.0.16 now available
by Nirbhay Choubey 18 Feb '15

18 Feb '15

Hi Raina, On Tue, Feb 17, 2015 at 1:04 PM, Raina Masand <rmasand(a)pivotal.io> wrote: > Hi Nirbhay, > > Now that Galera 25.3.9 is available, we have tried swapping it in with our > MariaDB 10.0.16 cluster. Seems to work so far, but wondering whether there > are plans to vet this Galera release as the officially recommended version? > I see that the currently recommended Galera version is 25.3.5, which was > released quite a while ago. Any news as to their compatibility would be > appreciated. > I have just finished running some tests on 10.0.16 with galera-25.3.9 with no failure. So, you should be good. By the way, we have not yet released galera-25.3.9 packages, planning to release them in upcoming MariaDB Galera cluster release. Best, Nirbhay > > Thanks, > > Raina and Lyle > Cloud Foundry Services Team > > On Tue, Feb 3, 2015 at 3:15 PM, Nirbhay Choubey <nirbhay(a)mariadb.com> > wrote: > >> Hi! >> >> On Tue, Feb 3, 2015 at 5:25 PM, Raina Masand < >> cf-core-services-eng(a)pivotal.io> wrote: >> >>> Hello, >>> >>> We are looking to use Galera 25.3.9 with our MariaDB cluster, which >>> claims to improve the stability of communication between nodes in the event >>> of network flakiness. Do you know if it will be compatible with MariaDB >>> 10.0.16? The release notes for MariaDB Galera Cluster 10.0.16 seem to >>> suggest that this should be safe, but it would be useful to know the >>> official recommendation. >>> >> >> MariaDB Galera 10.0.16 should be compatible with any 25.x.x galera >> versions. But, 25.3.9, in particular, has not been tested yet with MGC. >> >> Best, >> Nirbhay >> >> >>> Thanks, >>> >>> Raina and Lyle >>> Cloud Foundry Services Team >>> >>> On Wed, Jan 28, 2015 at 6:45 AM, Daniel Bartholomew <dbart(a)mariadb.com> >>> wrote: >>> >>>> On Wed, Jan 28, 2015 at 9:39 AM, Peter Laursen < >>>> peter_laursen(a)webyog.com> wrote: >>>> > YaST "Online Update" interface did not (both yesterday and two hours >>>> ago), >>>> > does not and will not identify that there is an upgrade available for >>>> > MariaDB 10.0.15, when there actually was/is. I cannot decide it this >>>> is an >>>> > issue with the RPM packaging or the repo configuration. But something >>>> is not >>>> > correct for SuSE. >>>> >>>> Ok, I'll look into it. >>>> >>>> Thanks! >>>> >>>> -- >>>> Daniel Bartholomew, MariaDB Release Manager >>>> MariaDB | http://mariadb.com >>>> >>>> _______________________________________________ >>>> Mailing list: https://launchpad.net/~maria-discuss >>>> Post to : maria-discuss(a)lists.launchpad.net >>>> Unsubscribe : https://launchpad.net/~maria-discuss >>>> More help : https://help.launchpad.net/ListHelp >>>> >>> >>> >>> _______________________________________________ >>> Mailing list: https://launchpad.net/~maria-discuss >>> Post to : maria-discuss(a)lists.launchpad.net >>> Unsubscribe : https://launchpad.net/~maria-discuss >>> More help : https://help.launchpad.net/ListHelp >>> >>> >> >

1 0

[Maria-discuss] R: Re: R: Re: Switch from rsync to xtrabackup
by absolutely_free＠libero.it 18 Feb '15

18 Feb '15

Hi Nirbhay, thank you very much for your answer. This cluster is already in production, with few databases (for mail user authentication, radius authentication, and so on). My question is: what would will happen if I change wsrep_sst_method on one node? How the other node can be "synced" if wsrep_sst_method is different (even for a few seconds)? Thank you, regards

2 1

[Maria-discuss] R: Re: Switch from rsync to xtrabackup
by absolutely_free＠libero.it 18 Feb '15

18 Feb '15

Hi, thank you for your reply. What is the correct order for this step? For example: 1) shutdown node 1 2) change config to xtrabackup-v2 on node 1 3) restart node 1? 4) shutdown node 2 5) change config to xtrabackup-v2 on node 2 6) restart node 2 ..and what about garbd on the third node? :) Thank you very much ----Messaggio originale---- Da: nirbhay(a)mariadb.com Data: 17/02/2015 14.22 A: "absolutely_free(a)libero.it"<absolutely_free(a)libero.it> Cc: "MariaDB discuss"<maria-discuss(a)lists.launchpad.net> Ogg: Re: [Maria-discuss] Switch from rsync to xtrabackup Hi! On Tue, Feb 17, 2015 at 6:07 AM, absolutely_free(a)libero.it <absolutely_free(a)libero.it> wrote: Hi, I am using two nodes (Debian 7.8 64bit) with MariaDB (mariadb-galera-server 5.5.41) and garbd on a third node. Now I'm using rsync method, I would like to switch to xtrabackup to avoid "lock" issue. Is it possible? Yes, the lock is taken only for syncing system tables. Should I simply install percona package and change this configuration? Right, the package name is "percona-xtrabackup". wsrep_sst_method=rsync to wsrep_sst_method=xtrabackup ? Or rather go for "xtrabackup-v2".https://mariadb.com/kb/en/mariadb/galera-cluster-system-variables/#wsrep_sst_method SST methods other than "rsync" also require "wsrep_sst_auth" variables to be set.https://mariadb.com/kb/en/mariadb/galera-cluster-system-variables/#wsre… Best,Nirbhay Thank you very much _______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss(a)lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp

2 1

[Maria-discuss] Network tuning
by absolutely_free＠libero.it 18 Feb '15

18 Feb '15

Hi all, according to this URL: http://www.fromdual.com/huge-amount-of-time-wait-connections is it recommended to change default behavior of tcp_tw_reuse and tcp_tw_recycle? I am using two MariaDB nodes with haproxy, keepalived and garbd on third node. Thank you very much

1 0

[Maria-discuss] INNODB_BUFFER_PAGE
by Rhys Campbell 17 Feb '15

17 Feb '15

Hi All, I've been playing with the innodb buffer pool save / load feature in MariaDB 10.0.14. I initially thought it wasn't working but I've since identified the cause of my confusion The buffer pool was being populated with the correct number of pages but no table/index name values were given in information_schema. INNODB_BUFFER_PAGE. These details are populated as soon as the database has been access. Steps to repeat. 1. Ensure buffer pool save/load is on. 2. Record the SPACE & PAGE_NUMBER details of a page in information_schema.INNODB_BUFFER_PAGE for one of your databases. 3. Stop MariaDB. 4. Start MariaDB 5. Allow time for buffer pool to load... 6. SELECT * FROM information_schema.INNODB_BUFFER_PAGE WHERE SPACE = 157 AND PAGE_NUMBER = 99212; <- NULL values for TABLE_NAME / INDEX_NAME 7. Execute USE <db_name> # Where db_name is the database containing the above page. 8. Repeat above select and TABLE_NAME and INDEX_NAME will be populated correctly. Now, on a busy database this wouldn't be an issue but it did throw me for a while on my dev box. I have found a MySQL bug report... http://lists.mysql.com/announce/847 "When running a query on INFORMATION_SCHEMA.INNODB_BUFFER_PAGE that requested table_name and index_name values, query results would include index pages without table_name or index_name values. (Bug #14529666)" But the bug has been deleted so I can't check the full details to see if this is resolved or still an issue. As an aside the logging for the buffer pool loading feature appears to use a different datetime format... 150217 18:03:37 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.20-68.0 started; log sequence number 103721589973 2015-02-17 18:03:37 7f53285f8700 InnoDB: Loading buffer pool(s) from /log/file/path/... Rhys Campbell Database Administrator TradingScreen, Inc. 23 York House, 5th Floor London WC2B 6UJ Email: rhys.james.campbell(a)googlemail.com<mailto:rhys.james.campbell@googlemail.com> Follow TradingScreen on Twitter<http://twitter.com/#!/TradingScreen> , Facebook<http://www.facebook.com/pages/TradingScreen/214046251945650> and our blog Trading Smarter<tradingsmarter.tradingscreen.com> This message is intended only for the recipient(s) named above and may contain confidential information. If you are not an intended recipient, you should not review, distribute or copy this message. Please notify the sender immediately by e-mail if you have received this message in error and delete it from your system.

1 0

[Maria-discuss] Switch from rsync to xtrabackup
by absolutely_free＠libero.it 17 Feb '15

17 Feb '15

Hi, I am using two nodes (Debian 7.8 64bit) with MariaDB (mariadb-galera-server 5.5.41) and garbd on a third node. Now I'm using rsync method, I would like to switch to xtrabackup to avoid "lock" issue. Is it possible? Should I simply install percona package and change this configuration? wsrep_sst_method=rsync to wsrep_sst_method=xtrabackup ? Thank you very much

2 1

Re: [Maria-discuss] MariaDB 10 multisource replication from AWS MySQL 5.6 RDS and Percona Server 5.6
by Reindl Harald 16 Feb '15

16 Feb '15

Am 16.02.2015 um 22:53 schrieb Vadim Pestovnikov: > Thank you Reindl. > > So basically what that means is that mariadb is not 100% compatable with > percona and mysql? define 100% - replication is a *binary log* if it would be identical in every aspect it would exist only one product and even if all docs pretend 100% compatibility i would never come to the idea even run different minor versions in a replication setup just follow these instructions leads to the conclusion mix different products is a bad idea: http://dev.mysql.com/doc/refman/5.0/en/replication-upgrade.html P.S.: i don't appreciate off-list replies > On Feb 16, 2015 1:23 PM, "Reindl Harald" <h.reindl(a)thelounge.net > <mailto:h.reindl@thelounge.net>> wrote: > > > > Am 16.02.2015 um 22:19 schrieb Vadim Pestovnikov: > > Error in Log_event::read_log_event(): 'Found invalid event in binary > log', data_len: 44, event_type: 33 > > Error reading relay log event: slave SQL thread aborted because > of I/O error > > My slave is MariaDB 10 with data and logs partitions encrypted > by LUKS > and with SSL enabled. As far as RDS and Percona servers don't > use SSL I > am using non SSL user for the replication. > > Any recommendations or suggestions would be extremely appreciated > > > don't mix different server versions in replication setups > > there is a good reason why it is recommended always to update first > the slaves, run "mysql_upgrade" and then the masters to be 100% sure > that the maste rnever don't write anything into the binlog the slave > won't understand because differences in details

2 1

[Maria-discuss] MariaDB 10 multisource replication from AWS MySQL 5.6 RDS and Percona Server 5.6
by Vadim Pestovnikov 16 Feb '15

16 Feb '15

Hi all, I am trying to setup the multisource replication from AWS MySQL 5.6 RDS to MariaDB 10 using multisource replication. The installation was successful I can see from show slave 'connection' status\G that binary logs and their positions are changing, but If I add a new data on a master it is not replicated to the slave. Also tried to replicate from Percona Server 5.6 to MariaDB 10 using the multisource replication, but got errors like: Error in Log_event::read_log_event(): 'Found invalid event in binary log', data_len: 44, event_type: 33 Error reading relay log event: slave SQL thread aborted because of I/O error My slave is MariaDB 10 with data and logs partitions encrypted by LUKS and with SSL enabled. As far as RDS and Percona servers don't use SSL I am using non SSL user for the replication. Any recommendations or suggestions would be extremely appreciated. -- Vadim

2 1

[Maria-discuss] New Question: reading dbase records marked for deletion
by AskMonty KB 16 Feb '15

16 Feb '15

Hello, A new question has been asked in "Data Manipulation" by williamblocher. Please answer it at http://mariadb.com/kb/en/reading-dbase-records-marked-for-deletion/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- Can you tell me if dbase records marked for deletion are treated as orinary records or ignored? Thank You Bill Blocher -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/reading-dbase-records-marked-for-deletion/

1 0

[Maria-discuss] New Question: Maria 10.0.15 high CPU/disk usage without queries
by AskMonty KB 16 Feb '15

16 Feb '15

Hello, A new question has been asked in "MariaDB Community" by artemkuchin. Please answer it at http://mariadb.com/kb/en/maria-10015-high-cpudisk-usage-without-queries/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- I just migrated the server from mysql 5.5 to mariadb 10.0.15 It is a web hosting server with about 100 sites on different platforms. So, there are about 100 databases. Most tables myisam, some innodb (mostly joomla 3) Before with mysql CPU load was less than 10%, disk uses by mysqld was also not very high. No, with top and top -mio i see pretty high numbers. mysqld takes from 20 to 30% cpu and 80-100% disk About configuration. It is xeon 4 cores+HT (8 cores seen by OS) with 32GB ram, 2 3TB SATA disks in software mirror. os is FreeBSD 10.1 stable I tried using thread of pools, one thread per connection - all the same The weird think what i show processlist i ass about 20 haning connection without any question. This is is normal, some sites leave connections for a while (mod_perl, php) the weirdness is that thare no queies while 20-30% load of CPU. What is mariddb doing? my.cnf [mysqld] #thread-handling= one-thread-per-connection thread_handling=pool-of-threads thread_pool_size=4 thread_cache_size = 45 init-connect='SET NAMES cp1251' default-storage-engine = MyISAM port= 3306 socket= /hoster/tmp/mysql.sock skip-external-locking skip-networking slow_query_log=1 slow_query_log_file=/hosts/MYSQLDB/slow.log # GLOBAL max_connections=800 max_allowed_packet = 50M key_buffer_size = 512M table_open_cache = 32768 query_cache_size = 256M query_cache_limit = 32M # PER THREAD read_buffer_size = 2M # PER REQUEST sort_buffer_size = 32M read_rnd_buffer_size = 1M myisam_sort_buffer_size = 128M join_buffer_size=2M server-id = 1 innodb_data_home_dir = /hosts/MYSQLDB innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend innodb_log_group_home_dir = /hosts/MYSQLDB innodb_buffer_pool_size = 384M innodb_log_file_size = 100M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 3 innodb_lock_wait_timeout = 50 -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/maria-10015-high-cpudisk-usage-without-queries/

1 0

Re: [Maria-discuss] Idea of monitoring tool of Mariadb
by Seung Hoon Yoo 12 Feb '15

12 Feb '15

Thanks reply Lefranc. I think 2 git monitoring solution u mention that would be using SQL execute and caching i think ( i guess, my short program knowledge) MY idea is not "SQL access" , but " GATHER info IN Memory Structure on mysqld proces" example select * from performance_schem => cache => GUI/HTTP ( SQL Method) => i think bad pfs structure (sql_parse.cc, pfs.cc) => memcopy... ( => I WANT METHOD) => i think good. 2 soultion u mentioned is use Direct Access Memory or SQL execute ?? Thanks!! and sorry My short English grammer. 2015-02-12 20:48 GMT+09:00 Guillaume Lefranc <guillaume(a)adishatz.net>: > Hello Seung Hoon Yoo, > > there are already some (experimental) tools which do that: > > https://github.com/svaroqui/http_monitor is a plugin for MariaDB 10 which > collects information based on information and performance schema > https://github.com/sjmudd/pstop is a performance monitor top-like you can > run as a command line UI > > Best regards, > > > 2015-02-12 12:36 GMT+01:00 Seung Hoon Yoo <sehyoo96(a)gmail.com>: > >> Hello, >> >> i think about monitoring gui tool ( sure, monyog Nagius support mariadb) >> Mysql Enterprise Monitor is cool, but commercial ver and that is oracle >> haha >> >> Anyway my idea first Performance schema info, >> that is store info in memory structure in source, >> so if during every 1 sec memcopy from performance schema to user-define >> structure >> and that information transfer out of mariadb by udp port etc.. >> >> So, until world in mysql / maria, their tool using proxy method or sql >> script >> thas will be some performance issue happen. >> >> so Direct Mariadb memory Access Method is useful.. >> >> >> So.. mariadb.com has any plan GUI Monitoring tool? >> and how about my idea about gathering performance schema ( + >> information_schema etc) >> info in mysqld thread info( memory structure) ?? >> >> >> Thanks for reading! >> >> p.s i am not used to english. ;) >> >> LG CNS post architecture Team >> >> _______________________________________________ >> Mailing list: https://launchpad.net/~maria-discuss >> Post to : maria-discuss(a)lists.launchpad.net >> Unsubscribe : https://launchpad.net/~maria-discuss >> More help : https://help.launchpad.net/ListHelp >> >> >

2 1

[Maria-discuss] Idea of monitoring tool of Mariadb
by Seung Hoon Yoo 12 Feb '15

12 Feb '15

Hello, i think about monitoring gui tool ( sure, monyog Nagius support mariadb) Mysql Enterprise Monitor is cool, but commercial ver and that is oracle haha Anyway my idea first Performance schema info, that is store info in memory structure in source, so if during every 1 sec memcopy from performance schema to user-define structure and that information transfer out of mariadb by udp port etc.. So, until world in mysql / maria, their tool using proxy method or sql script thas will be some performance issue happen. so Direct Mariadb memory Access Method is useful.. So.. mariadb.com has any plan GUI Monitoring tool? and how about my idea about gathering performance schema ( + information_schema etc) info in mysqld thread info( memory structure) ?? Thanks for reading! p.s i am not used to english. ;) LG CNS post architecture Team

1 0

[Maria-discuss] New Question: Migrating MySQL 5.5 Windows to MariaDB 10.x on new Windows server
by AskMonty KB 11 Feb '15

11 Feb '15

Hello, A new question has been asked in "Moving to MariaDB" by davidgonsalves. Please answer it at http://mariadb.com/kb/en/migrating-mysql-55-windows-to-mariadb-10x-on-new-w… as the person asking the question may not be subscribed to the mailing list. -------------------------------- My company is contemplating moving from MySQL 5.5 to MariaDB 10.x. We don't want to do an in place upgrade because the existing server is an older machine running Win 2003 x64. We have a new server that we're going to build out (don't know complete specs yet), and would like to know how we can best migrate the existing MySQL instance to a new instance of MariaDB on the new server. Is it as simple as doing a mysqldump from the existing server and piping it into the new? I've read how to do it here: http://dba.stackexchange.com/questions/174/how-can-i-move-a-database-from-o… are these answers adequate? -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/migrating-mysql-55-windows-to-mariadb-10x-on-new-w…

1 0

[Maria-discuss] New Question: XtraDB + query_cache_size MariaDB 10
by AskMonty KB 11 Feb '15

11 Feb '15

Hello, A new question has been asked in "MariaDB Community" by chrismatthews. Please answer it at http://mariadb.com/kb/en/xtradb-query_cache_size-mariadb-10/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- Hi, I have read that if your using MySQL InnoDB then you should not use query_cache_size. Does this also apply to MariaDB 10 with XtraDB ? -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/xtradb-query_cache_size-mariadb-10/

1 0

[Maria-discuss] New Question: Warning: mysqli::mysqli(): Headers and client library minor version mismatch.
by AskMonty KB 11 Feb '15

11 Feb '15

Hello, A new question has been asked in "MariaDB FAQ" by ariez_ahito_g. Please answer it at http://mariadb.com/kb/en/warning-mysqlimysqli-headers-and-client-library-mi… as the person asking the question may not be subscribed to the mailing list. -------------------------------- i am having error with phpipam installation in my centos box.. i got this error Warning: mysqli::mysqli(): Headers and client library minor version mismatch. Headers:50173 Library:50312 -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/warning-mysqlimysqli-headers-and-client-library-mi…

3 2