June 2016 - discuss - lists.mariadb.org

[Maria-discuss] Galera 23.2.7 mariadb 5.5.33a msvc 1600 binaries available
by Yann Nayn 21 May '25

21 May '25

Binaries have been uploaded for both x86 and amd64 platforms. due to github file size limitations , the directories have been uploaded unarchived. for Win33 binaries , please checkout https://github.com/YannNayn/galera-mariadb-win32.git and for Win64(amd64) binaries (being uploaded/pushed): https://github.com/YannNayn/galera-mariadb-win64.git they are not recommended for a production environment. in the my.cnf file: _________ wsrep_provider=galera_smm.dll wsrep_sst_method=msqldump # percona xtrabackup will be tested soon _________ libevent and openssl(the provided binaries use respectively 2.1.3-alpha and 1.1.0-dev versions ) will be added next on github some limitations are stated on openssl website copied here for convenience: ____________ from http://www.openssl.org/ ____________ This software package uses strong cryptography, so even if it is created, maintained and distributed from liberal countries in Europe (where it is legal to do this), it falls under certain export/import and/or use restrictions in some other parts of the world. PLEASE REMEMBER THAT EXPORT/IMPORT AND/OR USE OF STRONG CRYPTOGRAPHY SOFTWARE, PROVIDING CRYPTOGRAPHY HOOKS OR EVEN JUST COMMUNICATING TECHNICAL DETAILS ABOUT CRYPTOGRAPHY SOFTWARE IS ILLEGAL IN SOME PARTS OF THE WORLD. SO, WHEN YOU IMPORT THIS PACKAGE TO YOUR COUNTRY, RE-DISTRIBUTE IT FROM THERE OR EVEN JUST EMAIL TECHNICAL SUGGESTIONS OR EVEN SOURCE PATCHES TO THE AUTHOR OR OTHER PEOPLE YOU ARE STRONGLY ADVISED TO PAY CLOSE ATTENTION TO ANY EXPORT/IMPORT AND/OR USE LAWS WHICH APPLY TO YOU. THE AUTHORS OF OPENSSL ARE NOT LIABLE FOR ANY VIOLATIONS YOU MAKE HERE. SO BE CAREFUL, IT IS YOUR RESPONSIBILITY. ________________________________________________ msvc 1600 redistributables SP1 need to be installed/available on the target machine: vcredist_x86.exe : http://www.microsoft.com/en-us/download/details.aspx?id=8328 vcredist_x64.exe : http://www.microsoft.com/en-us/download/details.aspx?id=13523 MSys binaries are provided and msqld.bat should then be used instead of mysqld.exe (e.g. mysld.bat --console --wsrep_cluster_address=gcomm:// ) in order to have a working sh shell(cygwin has been proved to do it as well) Please note that oqgraph is disabled (boost trunk is used , that is 1.55) Comments and suggestions are welcome.

5 4

[Maria-discuss] why stdout? -> [Note] /usr/libexec/mysqld (mysqld 10.0.20-MariaDB) starting as process 115096
by Reindl Harald 05 Jul '20

05 Jul '20

Aug 6 12:24:24 testserver mysqld: 150806 12:24:24 [Note] /usr/libexec/mysqld (mysqld 10.0.20-MariaDB) starting as process 115096 ... why is this now stdout instead mysql logs? on systemd based distributions that spits now to the global syslog and finally on machines restarting 2 instances every hour for backup reasons it annoys until 10.0.19 or 10.0.20 that was not this way

5 13

[Maria-discuss] Virtual CHECK constraint using Virtual columns
by Peter Laursen 16 Oct '16

16 Oct '16

As described in this Blog http://mablomy.blogspot.dk/2016/04/check-constraint-for-mysql-not-null-on.h…. A very nice hack/trick IMO. However it is not working with MariaDB as VC's cannot be declared NOT NULL. What prevents that? -- Peter -- Webyog

3 7

[Maria-discuss] New Question: MONyog version detection
by AskMonty KB 30 Jun '16

30 Jun '16

Hello, A new question has been asked in "MariaDB FAQ" by palash.harchandani93_43595. Please answer it at http://mariadb.com/kb/en/monyog-version-detection/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- Is it possible to identify which version of MONyog is currently running when we are using the tarball installation?? This situation arises when I havent installed MONyog and I am a user who wwants to find which MONyog version is being used. -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/monyog-version-detection/

1 0

[Maria-discuss] New Question: Swap usage won't decrease
by AskMonty KB 28 Jun '16

28 Jun '16

Hello, A new question has been asked in "MariaDB FAQ" by alexandraarreaza. Please answer it at http://mariadb.com/kb/en/swap-usage-wont-decrease/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- We have a 5 DB nodes Galera Cluster in Production (MariaDB 10.0). About a week ago a DB import was performed over an existing DB (Its size ~30G) and during this process, all DB nodes started complaining about swap usage and haven't stopped complaining since then (e.g: One of them would be using 814 MB out of 4095 MB). I have read a good few articles about MySQL and swapping issues (this is a good one: https://blog.jcole.us/2010/09/28/mysql-swap-insanity-and-the-numa-architect…) and also about swapping in MariaDB (https://mariadb.com/kb/en/mariadb/configuring-swappiness/) but still can't find out a way of solving this problem without restarting MySQL. We have NUMA architecture with 2 nodes and 96G of RAM. Our buffer pool size is 70G and it is set to use 12 innodb_buffer_pool_instances. 1) Is there any fix to this situation besides restarting MySQL? 2) Is there a way of tuning our cluster to avoid swapping in the future? Thanks. -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/swap-usage-wont-decrease/

1 0

[Maria-discuss] columnstore
by Roberto Spadim 28 Jun '16

28 Jun '16

Hi guys! anyone testing columnstore? i will test in a SCADA system this week, news and problems i will report here -- Roberto Spadim

2 2

[Maria-discuss] No Response From MariaDB Support Admin
by Tom Jay 28 Jun '16

28 Jun '16

Hello, I emailed support-admin(a)mariadb.com about a problem with the mariadb.com website. I have not yet received a response. Is there anyone else I can contact with my query? Thanks. Tom

2 1

[Maria-discuss] New Question: Problem Connector ODBC between MariaDB and ACCESS
by AskMonty KB 27 Jun '16

27 Jun '16

Hello, A new question has been asked in "MariaDB Connector/ODBC" by jlpierrey_52563. Please answer it at http://mariadb.com/kb/en/problem-connector-odbc-between-mariadb-and-access/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- Hello, I have a problem with the connection between ACCESS (2010), running with W7, and a MariaDB installed on a Synology NAS (DS212J). Test of DSN is OK. Import and link tables from NAS towards ACCESS are OK. But export from ACCESS is impossible: alert message says: " "ODBC l'appel a échoué (the call failed) [ma-2.0.10][5.5.49-MariaDB]You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '#O),'C_UFR' INTEGER('#O),'U_SECRETARIAT' VARCHAR,'U-2SECRETARIAT' VAR at line 1 (#1064)" I thank you Complementary Infos: The pb is the same with 1.0.6 2.0.10 2.0.11 releases of mariadb connector (32 and 64 bits) C_UFR, U_SECRETARIAT ant U_2SECRETARIAT are the three first fields of the table i try to export. Setting of the NAS: • Serveur : Localhost via UNIX socket • Type de serveur : MariaDB • Version du serveur : 5.5.49-MariaDB - Source distribution • Version du protocole : 10 • Jeu de caractères du serveur : UTF-8 Unicode (utf8) Serveur Web: • nginx/1.9.11 • Version du client de base de données : libmysql - mysqlnd 5.0.11-dev - 20120503 - $Id: 76b08b24596e12d4553bd41fc93cccd5bac2fe7a $ • Extension PHP : mysqli curl mbstring • Version de PHP : 5.6.21 -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/problem-connector-odbc-between-mariadb-and-access/

1 0

[Maria-discuss] New Question: MariaDB Backup using CommVault MYSQL iDataAgent
by AskMonty KB 27 Jun '16

27 Jun '16

Hello, A new question has been asked in "MariaDB FAQ" by palash.harchandani93_43595. Please answer it at http://mariadb.com/kb/en/mariadb-backup-using-commvault-mysql-idataagent/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- Commvault idatagent supports mariadb but i want to know which backup utility scripts are used by idataagent to backup the database. Also does it Backup all storage engines or not? -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/mariadb-backup-using-commvault-mysql-idataagent/

1 0

[Maria-discuss] New Question: MONyog Monitoring when password changed
by AskMonty KB 27 Jun '16

27 Jun '16

Hello, A new question has been asked in "MariaDB FAQ" by palash.harchandani93_43595. Please answer it at http://mariadb.com/kb/en/monyog-monitoring-when-password-changed/ as the person asking the question may not be subscribed to the mailing list. -------------------------------- Is it possible to get an alert whenever the user with which we are monitoring changes password in the mariadb database ?? -------------------------------- To view or answer this question please visit: http://mariadb.com/kb/en/monyog-monitoring-when-password-changed/

1 0