December 2018 - discuss - lists.mariadb.org

[Maria-discuss] why stdout? -> [Note] /usr/libexec/mysqld (mysqld 10.0.20-MariaDB) starting as process 115096
by Reindl Harald 05 Jul '20

05 Jul '20

Aug 6 12:24:24 testserver mysqld: 150806 12:24:24 [Note] /usr/libexec/mysqld (mysqld 10.0.20-MariaDB) starting as process 115096 ... why is this now stdout instead mysql logs? on systemd based distributions that spits now to the global syslog and finally on machines restarting 2 instances every hour for backup reasons it annoys until 10.0.19 or 10.0.20 that was not this way

5 13

[Maria-discuss] MariaDB-10.2.11 Long Time To Start
by Michael Caplan 15 Mar '19

15 Mar '19

Hi, I'm setting up a replication slave based off of MySQL 5.6. There are a large number of tables (400K). The MySQL 5.6 master takes around 10 minutes to start up, where the new MariaDB 10.2 slave takes close to 30 minutes. What is making the startup take soo long? In the below mysql log, you can see in the startup sequence between "Highest supported file format is Barracuda." and "InnoDB: 128 out of 128 rollback segments are active." the startup process takes the majority of its time: 2018-01-07 9:38:15 139980432365760 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2018-01-07 9:38:15 139980432365760 [Note] InnoDB: Uses event mutexes 2018-01-07 9:38:15 139980432365760 [Note] InnoDB: Compressed tables use zlib 1.2.8 2018-01-07 9:38:15 139980432365760 [Note] InnoDB: Using Linux native AIO 2018-01-07 9:38:15 139980432365760 [Note] InnoDB: Number of pools: 1 2018-01-07 9:38:15 139980432365760 [Note] InnoDB: Using SSE2 crc32 instructions 2018-01-07 9:38:15 139980432365760 [Note] InnoDB: Initializing buffer pool, total size = 54G, instances = 8, chunk size = 128M 2018-01-07 9:38:18 139980432365760 [Note] InnoDB: Completed initialization of buffer pool 2018-01-07 9:38:18 139918113195776 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority(). 2018-01-07 9:38:18 139980432365760 [Note] InnoDB: Highest supported file format is Barracuda. 2018-01-07 10:11:48 139980432365760 [Note] InnoDB: 128 out of 128 rollback segments are active. 2018-01-07 10:11:48 139980432365760 [Note] InnoDB: Creating shared tablespace for temporary tables 2018-01-07 10:11:48 139980432365760 [Note] InnoDB: Setting file './ibtmp1' size to 12 MB. Physically writing the file full; Please wait ... 2018-01-07 10:11:48 139980432365760 [Note] InnoDB: File './ibtmp1' size is now 12 MB. 2018-01-07 10:11:48 139980432365760 [Note] InnoDB: Waiting for purge to start 2018-01-07 10:11:48 139980432365760 [Note] InnoDB: 5.7.20 started; log sequence number 1394303471760 2018-01-07 10:11:48 139919461500672 [Note] InnoDB: Loading buffer pool(s) from /var/lib/mysql/ib_buffer_pool 2018-01-07 10:11:48 139980432365760 [Note] Server socket created on IP: '::'. 2018-01-07 10:11:49 139980432365760 [Note] Reading of all Master_info entries succeded 2018-01-07 10:11:49 139980432365760 [Note] Added new Master_info '' to hash table 2018-01-07 10:11:49 139980432365760 [Note] /usr/sbin/mysqld: ready for connections. Version: '10.2.11-MariaDB-10.2.11+maria~xenial-log' socket: '/var/lib/mysql/mysql.sock' port: 3306 mariadb.org binary distribution Any ideas why? I've included my my.conf file below. Thanks, Mike # Generated by Percona Configuration Wizard (http://tools.percona.com/) version REL5-20120208 # Configuration name usaddxprdsqlpm3 generated formcaplan(a)labnet.net at 2017-12-22 13:49:58 [mysql] # CLIENT # port = 3306 socket = /var/lib/mysql/mysql.sock [mysqladmin] # CLIENT # port = 3306 socket = /var/lib/mysql/mysql.sock [mysqld] # GENERAL # user = mysql default-storage-engine = InnoDB socket = /var/lib/mysql/mysql.sock pid-file = /var/lib/mysql/mysql.pid character-set-server = utf8 collation_server = utf8_general_ci performance_schema = 0 # MyISAM # key-buffer-size = 32M myisam-recover = FORCE,BACKUP # SAFETY # max-allowed-packet = 20M max-connect-errors = 1000000 skip-name-resolve sysdate-is-now = 1 innodb = FORCE # DATA STORAGE # datadir = /var/lib/mysql/ # BINARY LOGGING # log-bin = /var/lib/mysql/mysql-bin binlog_format = MIXED server-id = 3 expire-logs-days = 7 sync-binlog = 1 # REPLICATION # read-only = 1 skip-slave-start = 1 log-slave-updates = 1 relay-log = /var/lib/mysql/relay-bin slave-net-timeout = 60 sync-master-info = 1 sync-relay-log = 1 sync-relay-log-info = 1 # CACHES AND LIMITS # tmp-table-size = 32M max-heap-table-size = 32M query-cache-type = 0 query-cache-size = 0 max-connections = 500 thread-cache-size = 50 open-files-limit = 65535 table-definition-cache = 4096 table-open-cache = 10240 # INNODB # innodb-flush-method = O_DIRECT innodb-log-files-in-group = 2 innodb-log-file-size = 512M innodb-flush-log-at-trx-commit = 1 innodb-file-per-table = 1 innodb-buffer-pool-size = 54G # LOGGING # log-error = /var/lib/mysql/mysql-error.log log-queries-not-using-indexes = 0 slow-query-log = 0 slow-query-log-file = /var/lib/mysql/mysql-slow.log [mariadb] plugin-load-add=file_key_management file_key_management_filename=/var/lib/mysql/keys.enc file_key_management_filekey=FILE:/var/lib/mysql/mysql.key file_key_management_encryption_algorithm=AES_CTR encrypt_binlog=0

3 19

[Maria-discuss] Chewing Through Swap - Swappiness = 0
by Michael Caplan 09 Mar '19

09 Mar '19

Hi, I'm trying to figure out why my recently put into production MariaDB is so swap hungry. I'm running 10.2.14, with roughly 300GB data (1000K +/- tables). 95% tables are innodb. I have 64GB RAM, with INNODB buffer pool size set to 50GB (full my.cnf below). The OS is Ubuntu 16.04.4. This is a dedicated MariaDB server. I have swappiness set to 0. I started with available swap set to just shy of 1GB. When swap got to 85% used, I bumped swap to 3GB. A day later, swap again was 85% used, and I bumped it to 5GB. A day later, swap again was 85% used, so I bumped it to 15GB. 2 days later 50% of the available swap was used. I restarted the DB moments ago, freeing up all 15GB but 128MB of swap: total used free shared buff/cache available Mem: 62G 20G 4.7G 266M 37G 41G Swap: 14G 128M 14G My understanding is that the OS should never allocate swap when swappiness is 0, so that has me confused. I've had similar issues with MySQL 5.6 (what I upgraded from) dipping into swap, but that instance had swappiness set to 1, and never consumed more than 5GB of swap. Questions: 1) How much of this is an OS issue vs MariaDB issue? 2) What MariaDB config vars should I be looking at to fix this issue? 3) What linux config vars should I be looking at to fix this issue? Thanks, Mike [mysqld] # GENERAL # user = mysql default-storage-engine = InnoDB character-set-server = utf8 collation_server = utf8_general_ci performance_schema = 0 max_allowed_packet = 16777216 sql_mode = "NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION" # MyISAM # key-buffer-size = 32M myisam-recover = FORCE,BACKUP # SAFETY # max-allowed-packet = 16777216 max-connect-errors = 1000000 skip-name-resolve sysdate-is-now = 1 innodb = FORCE local_infile = 0 secure_auth = 1 safe_user_create = 1 skip_symbolic_links = 1 wait_timeout = 28800 # DATA STORAGE # datadir = /var/lib/mysql/ # BINARY LOGGING # log-bin = /var/lib/mysql/mysql-bin binlog_format = MIXED server-id = 3 expire-logs-days = 7 sync-binlog = 1 # REPLICATION # read-only = 1 skip-slave-start = 1 log-slave-updates = 1 relay-log = /var/lib/mysql/relay-bin slave-net-timeout = 60 sync-master-info = 1 sync-relay-log = 1 sync-relay-log-info = 1 # CACHES AND LIMITS # tmp-table-size = 32M max-heap-table-size = 32M query-cache-type = 0 query-cache-size = 0 max-connections = 500 thread-cache-size = 50 open-files-limit = 65535 table-definition-cache = 4096 table-open-cache = 10240 # INNODB # innodb-flush-method = O_DIRECT innodb-log-files-in-group = 2 innodb-log-file-size = 512M innodb-flush-log-at-trx-commit = 2 innodb-file-per-table = 1 innodb-buffer-pool-size = 50G

3 8

[Maria-discuss] Post-MySQL(5.6) to MariaDB migration question - why are master_info_repository=TABLE and relay_log_info_repository=TABLE not supported?
by Artem Russakovskii 25 Dec '18

25 Dec '18

Hi, This is my first post to the mariadb list, as I just migrated from mysql to mariadb (OpenSUSE stopped supporting mysql after Leap 15.0). I immediately ran into an issue migrating, with the slave not starting. Upon further analysis, it turned out to be the lack of support of master_info_repository=TABLE and relay_log_info_repository=TABLE in mariadb, which means the master information effectively disappeared as far as the slave server is concerned. I am very surprised by this revelation. Not only did it break replication (I had to figure this out and reassemble the CHANGE MASTER TO command with the values fished out from the slave_master_info table), it also seems to be a step back when it comes to crash-safe replication. Does anyone have an explanation for why we're now back to master.info and relay-log.info on disk rather than nice tables in memory? See https://www.percona.com/blog/2013/09/13/enabling-crash-safe-slaves-with-mys… from years ago for more info, for example. It'd be great to hear from the core mariadb/mysql developers. The lack of master_info_repository and relay_log_info_repository support is documented here: https://mariadb.com/kb/en/library/system-variable-differences-between-maria… . Thank you. Sincerely, Artem

2 3

[Maria-discuss] Large query performance degrade after converting table from MyISAM to InnoDB
by Conor Murphy 17 Dec '18

17 Dec '18

Hi, I'm trying to covert an existing database from MyISAM to InnoDB. The conversion completed okay, but I'm seeing one particular query causing problems, with MyISAM it was taking ~ 6 minutes to complete, with InnoDB it's taking nearly 14 hours The query is as follows SELECT procid, UNIX_TIMESTAMP(MAX(time)), COUNT(*) AS num FROM proc_stats GROUP BY procid HAVING num < 100 EXPLAIN SELECT procid, UNIX_TIMESTAMP(MAX(time)), COUNT(*) AS num FROM proc_stats GROUP BY procid HAVING num < 100 +------+-------------+------------+-------+---------------+--------+---------+------+-----------+-------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +------+-------------+------------+-------+---------------+--------+---------+------+-----------+-------+ | 1 | SIMPLE | proc_stats | index | NULL | pidIdx | 2 | NULL | 956928549 | | +------+-------------+------------+-------+---------------+--------+---------+------+-----------+-------+ | proc_stats | CREATE TABLE `proc_stats` ( `time` datetime NOT NULL, `siteid` smallint(5) unsigned DEFAULT NULL, `serverid` smallint(5) unsigned NOT NULL, `procid` smallint(5) unsigned NOT NULL, `cpu` smallint(5) unsigned DEFAULT NULL, `mem` mediumint(8) unsigned NOT NULL, `thr` smallint(5) unsigned NOT NULL, `fd` smallint(5) unsigned DEFAULT NULL, `rss` mediumint(8) unsigned DEFAULT NULL, `nproc` tinyint(3) unsigned NOT NULL DEFAULT '0', `sample_interval` smallint(5) unsigned DEFAULT NULL, KEY `pidIdx` (`procid`), KEY `serverTimeIdx` (`serverid`,`time`), KEY `siteIdIdx` (`siteid`,`time`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 /*!50100 PARTITION BY RANGE ( TO_DAYS(time)) (PARTITION P20120101 VALUES LESS THAN (734868) ENGINE = InnoDB, PARTITION P20151201 VALUES LESS THAN (736298) ENGINE = InnoDB, PARTITION P20160101 VALUES LESS THAN (736329) ENGINE = InnoDB, PARTITION P20160201 VALUES LESS THAN (736360) ENGINE = InnoDB, PARTITION P20160301 VALUES LESS THAN (736389) ENGINE = InnoDB, PARTITION P20160401 VALUES LESS THAN (736420) ENGINE = InnoDB, PARTITION P20160501 VALUES LESS THAN (736450) ENGINE = InnoDB, PARTITION P20160601 VALUES LESS THAN (736481) ENGINE = InnoDB, PARTITION P20160701 VALUES LESS THAN (736511) ENGINE = InnoDB, PARTITION P20160801 VALUES LESS THAN (736542) ENGINE = InnoDB, PARTITION P20160901 VALUES LESS THAN (736573) ENGINE = InnoDB, PARTITION P20161001 VALUES LESS THAN (736603) ENGINE = InnoDB, PARTITION P20161101 VALUES LESS THAN (736634) ENGINE = InnoDB, PARTITION P20161201 VALUES LESS THAN (736664) ENGINE = InnoDB, PARTITION P20170101 VALUES LESS THAN (736695) ENGINE = InnoDB, PARTITION P20170201 VALUES LESS THAN (736726) ENGINE = InnoDB, PARTITION P20170301 VALUES LESS THAN (736754) ENGINE = InnoDB, PARTITION P20170401 VALUES LESS THAN (736785) ENGINE = InnoDB, PARTITION P20170501 VALUES LESS THAN (736815) ENGINE = InnoDB, PARTITION P20170601 VALUES LESS THAN (736846) ENGINE = InnoDB, PARTITION P20170701 VALUES LESS THAN (736876) ENGINE = InnoDB, PARTITION P20170801 VALUES LESS THAN (736907) ENGINE = InnoDB, PARTITION P20170901 VALUES LESS THAN (736938) ENGINE = InnoDB, PARTITION P20171001 VALUES LESS THAN (736968) ENGINE = InnoDB, PARTITION P20171101 VALUES LESS THAN (736999) ENGINE = InnoDB, PARTITION P20171201 VALUES LESS THAN (737029) ENGINE = InnoDB, PARTITION P20180101 VALUES LESS THAN (737060) ENGINE = InnoDB, PARTITION Q201804 VALUES LESS THAN (737150) ENGINE = InnoDB, PARTITION Q201807 VALUES LESS THAN (737241) ENGINE = InnoDB, PARTITION Q201810 VALUES LESS THAN (737333) ENGINE = InnoDB, PARTITION Q201901 VALUES LESS THAN (737425) ENGINE = InnoDB, PARTITION QMAXVALUE VALUES LESS THAN MAXVALUE ENGINE = InnoDB) */ | While the query is running, all I can see in the processlist is | 64313 | statsadm| 64313 | statsadm | priv:41254 | statsdb | Query | 13001 | Sending data | SELECT procid, MAX(time), COUNT(*) AS num FROM proc_stats GROUP BY procid HAVING num < 100 | 0.000 | Version is 5.5.60-MariaDB Any suggestions on how to localize why the query is taking so long with InnoDB? Thanks, Conor

4 9

[Maria-discuss] Missing rights on 'CREATE ALGORITHM=UNDEFINED DEFINER...'
by Thomas Plant 13 Dec '18

13 Dec '18

Hello all, I have a request from a user who can not create a view in his database. He has the following rights granted: +----------------------------------------------------------------------------------------------------------------+ | Grants for user@% | +----------------------------------------------------------------------------------------------------------------+ | GRANT USAGE ON *.* TO 'user'@'%' IDENTIFIED BY PASSWORD '***************' | | GRANT ALL PRIVILEGES ON `dbname`.* TO 'user'@'%' | +----------------------------------------------------------------------------------------------------------------+ The view he tries to create looks like these: CREATE ALGORITHM=UNDEFINED DEFINER=`xxxxxxxxxxx`(a)`xx.xxx.xxx.x/xxx.xxx.xxx.x` SQL SECURITY DEFINER VIEW `jos_docman_file_counts` AS select `jos_docman_documents`.`storage_path` AS `storage_path`,count(0) AS `count` from `jos_docman_documents` where (`jos_docman_documents`.`storage_type` = 'file') group by `jos_docman_documents`.`storage_path`; And gets as error: #1227 - Access denied; you need (at least one of) the SUPER privilege(s) for this operation What SUPER privilege is needed for this view? The Database is MariaDB 10.1 on Centos 7. Thanks for any hint about his. Greetings, Thomas

2 3