- discuss - lists.mariadb.org

[Maria-discuss] MariaDB 10.2.6 Delay slave question?
by Ljr Yang 24 May '17

24 May '17

HI, Today, we upgrade a group MariaDB 10.1.22 to MariaDB 10.2.6, after upgade, start delay slave : change master to master_delay=86400 start slave and execute show all slaves status , Seconds_Behind_Master continue grow and Exec_Master_Log_Pos not change, please help confirm what cause lead this ? thanks. Slave_IO_Running: Yes Slave_SQL_Running: Yes * Exec_Master_Log_Pos: 367* Seconds_Behind_Master: 116072 Gtid_IO_Pos: 0-227-72846307321 Parallel_Mode: conservative SQL_Delay: 86400 SQL_Remaining_Delay: 83164 Slave_SQL_Running_State: Waiting until MASTER_DELAY seconds after master executed event after 5 minutes, Slave_IO_Running: Yes Slave_SQL_Running: Yes * Exec_Master_Log_Pos: 367* Seconds_Behind_Master: 116550 Gtid_IO_Pos: 0-227-72846546131 Parallel_Mode: conservative SQL_Delay: 86400 SQL_Remaining_Delay: 82686 Slave_SQL_Running_State: Waiting until MASTER_DELAY seconds after master executed event

1 0

[Maria-discuss] MariaDB 10.2.6 Stable (GA) now available
by Daniel Bartholomew 23 May '17

23 May '17

The MariaDB project is pleased to announce the immediate availability of MariaDB 10.2.6 Stable (GA). This is the first stable release in the MariaDB 10.2 series. MariaDB 10.0.31 and MariaDB Connector/ODBC 2.0.15 have also been released. See the Release Notes and Changelogs for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB 10.2.6 - Release Notes: https://mariadb.com/kb/en/mdb-1026-rn/ - Changelog: https://mariadb.com/kb/en/mdb-1026-cl/ - Downloads: https://downloads.mariadb.org/mariadb/10.2.6 About MariaDB 10.2: - https://mariadb.com/kb/en/what-is-mariadb-102/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ MariaDB 10.0.31 - Release Notes: https://mariadb.com/kb/en/mdb-10031-rn/ - Changelog: https://mariadb.com/kb/en/mdb-10031-cl/ - Downloads: https://downloads.mariadb.org/mariadb/10.0.31 About MariaDB 10.0: - https://mariadb.com/kb/en/what-is-mariadb-100/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ MariaDB Connector/ODBC 2.0.15 - Release Notes: https://mariadb.com/kb/en/mco-2015-rn/ - Changelog: https://mariadb.com/kb/en/mco-2015-cl/ - Downloads: https://downloads.mariadb.org/connector-odbc/2.0.15/ About MariaDB Connector/ODBC: - https://mariadb.com/kb/en/about-mariadb-connector-odbc/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/donate/ We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadbfdn - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

1 0

[Maria-discuss] Connector Net Question
by ksubramanian＠paycommerce.com 17 May '17

17 May '17

All, We have set auto-commit=false at server level. But our .Net developers want to enable this auto-commit as true (default behaviour) that I hesitant to do that. Is there any connector (driver) properties that we can set at connection level for auto-commit. I know in JDBC driver, we have the properties that we can set at driver level when we establish connection to DB. But for connector/Net I am trying to find, couldn’t locate one. I noticed auto-enlist sett to true or false, not sure whether this will mimic the auto-commit functionality in a given connection. Can anyone using .Net and MariaDB combination help me to share your thought on this. Regards, Karthick Sent from Mail for Windows 10

2 3

Re: [Maria-discuss] Connector Net Question
by Federico Razzoli 17 May '17

17 May '17

Note that the auto commit was always enabled by default in MySQL. So, changing this default would probably break most existing applications. Running a multi-statement transaction in autocommit is possible by using START TRANSACTION explicitly. Applications can do this and just don't care about autocommit value, if they want. Cheers, Federico -------------------------------------------- Mer 17/5/17, <ksubramanian(a)paycommerce.com> ha scritto: Oggetto: Re: [Maria-discuss] Connector Net Question A: "Vladislav Vaintroub" <vvaintroub(a)gmail.com>, "Maria Discuss" <maria-discuss(a)lists.launchpad.net> Data: Mercoledì 17 maggio 2017, 16:36 #yiv0052539947 #yiv0052539947 -- _filtered #yiv0052539947 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv0052539947 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} #yiv0052539947 #yiv0052539947 p.yiv0052539947MsoNormal, #yiv0052539947 li.yiv0052539947MsoNormal, #yiv0052539947 div.yiv0052539947MsoNormal {margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;color:windowtext;} #yiv0052539947 a:link, #yiv0052539947 span.yiv0052539947MsoHyperlink {color:blue;text-decoration:underline;} #yiv0052539947 a:visited, #yiv0052539947 span.yiv0052539947MsoHyperlinkFollowed {color:#954F72;text-decoration:underline;} #yiv0052539947 pre {margin:0cm;margin-bottom:.0001pt;font-size:10.0pt;color:black;} #yiv0052539947 span.yiv0052539947HTMLPreformattedChar {color:black;} #yiv0052539947 .yiv0052539947MsoChpDefault {} _filtered #yiv0052539947 {margin:72.0pt 72.0pt 72.0pt 72.0pt;} #yiv0052539947 div.yiv0052539947WordSection1 {} #yiv0052539947 The reason for disable the auto-commit is to mimic more or less similar to oracle behaviour. Because our existing system was in oracle. Just asking out of curiosity – why we enable auto-commit by default in Maria DB. I felt that it wont give control on how we maintain the transaction. Can anyone provide some reasons for why we need to keep the auto-commit enabled at server level. Sent from Mail for Windows 10 From: Vladislav Vaintroub Sent: 17 May 2017 18:08 To: ksubramanian(a)paycommerce.com; Maria Discuss Subject: Re: [Maria-discuss] Connector Net Question On 17.05.2017 11:26, ksubramanian(a)paycommerce.com wrote:All, We have set auto-commit=false at server level. But our .Net developers want to enable this auto-commit as true (default behaviour) that I hesitant to do that. Is there any connector (driver) properties that we can set at connection level for auto-commit. I know in JDBC driver, we have the properties that we can set at driver level when we establish connection to DB. But for connector/Net I am trying to find, couldn’t locate one. I noticed auto-enlist sett to true or false, not sure whether this will mimic the auto-commit functionality in a given connection. Can anyone using .Net and MariaDB combination help me to share your thought on this. Out of curiosity, what is the reason for you to use the non-default behavior (global auto-commit=false)? As far as I know, you cannot set arbitrary session variable automatically with C/NET, and there is no property for autocommit. Thus this would need to be done in code, just after connecting, e.g command.executeNonQuery("set @@autocommit=1") Regards,Karthick Sent from Mail for Windows 10 _______________________________________________Mailing list: https://launchpad.net/~maria-discussPost to : maria-discuss(a)lists.launchpad.netUnsubscribe : https://launchpad.net/~maria-discussMore help : https://help.launchpad.net/ListHelp _______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss(a)lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp

1 0

[Maria-discuss] Cross compile error
by Lucian Cristian 16 May '17

16 May '17

Hi I'm trying to cross compile (any 10.* versions) using musl and uClibc++ for a LEDE/Openwrt system and I have problems with these errors: staging_dir/target-x86_64_musl/usr/include/uClibc++/associative_base:444:8: error: 'void std::__base_associative<Key, ValueType, Compare, Allocator>::swap(std::__base_associative<Key, ValueType, Compare, Allocator>&) [with Key = dict_foreign_t*; ValueType = dict_foreign_t*; Compare = dict_foreign_compare; Allocator = ut_allocator<dict_foreign_t*>]' is protected void __base_associative<Key, ValueType, Compare, Allocator>::swap(__base_associative<Key, ValueType, Compare, Allocator>& m) ^ build_dir/target-x86_64_musl/mariadb-10.2.4/storage/innobase/dict/dict0dict.cc:1996:32: error: within this context table->foreign_set.swap(fk_set); ^ storage/innobase/CMakeFiles/innobase.dir/build.make:542: recipe for target 'storage/innobase/CMakeFiles/innobase.dir/dict/dict0dict.cc.o' failed staging_dir/target-x86_64_musl/usr/include/uClibc++/map: In instantiation of 'std::map<Key, T, Compare, Allocator>::reference std::map<Key, T, Compare, Allocator>::operator[](const key_type&) [with Key = const char*; T = dict_index_t*; Compare = ut_strcmp_functor; Allocator = ut_allocator<std::pair<const char*, dict_index_t*> >; std::map<Key, T, Compare, Allocator>::reference = std::pair<const char*, dict_index_t*>&; std::map<Key, T, Compare, Allocator>::key_type = const char*]': build_dir/target-x86_64_musl/mariadb-10.2.4/storage/innobase/dict/dict0stats.cc:2518:22: required from here staging_dir/target-x86_64_musl/usr/include/uClibc++/map:143:13: error: invalid initialization of reference of type 'std::map<const char*, dict_index_t*, ut_strcmp_functor, ut_allocator<std::pair<const char*, dict_index_t*> > >::reference {aka std::pair<const char*, dict_index_t*>&}' from expression of type 'dict_index_t*' return i->second; ^ storage/innobase/CMakeFiles/innobase.dir/build.make:614: recipe for target 'storage/innobase/CMakeFiles/innobase.dir/dict/dict0stats.cc.o' failed build_dir/target-x86_64_musl/mariadb-10.2.4/plugin/handler_socket/handlersocket/hstcpsvr.cpp: In constructor 'dena::hstcpsvr::hstcpsvr(const dena::config&)': build_dir/target-x86_64_musl/mariadb-10.2.4/plugin/handler_socket/handlersocket/hstcpsvr.cpp:92:37: error: invalid initialization of non-const reference of type 'std::auto_ptr<volatile dena::database_i>&' from an rvalue of type 'dena::database_ptr {aka std::auto_ptr<volatile dena::database_i>}' cshared.dbptr = database_i::create(c); ^ In file included from staging_dir/target-x86_64_musl/usr/include/uClibc++/vector:22:0, from build_dir/target-x86_64_musl/mariadb-10.2.4/plugin/handler_socket/handlersocket/hstcpsvr.cpp:12: staging_dir/target-x86_64_musl/usr/include/uClibc++/memory:137:12: note: initializing argument 1 of 'std::auto_ptr<T>& std::auto_ptr<T>::operator=(std::auto_ptr<T>&) [with T = volatile dena::database_i]' auto_ptr& operator=(auto_ptr& p) throw(){ ^ plugin/handler_socket/CMakeFiles/handlersocket.dir/build.make:134: recipe for target 'plugin/handler_socket/CMakeFiles/handlersocket.dir/handlersocket/hstcpsvr.cpp.o' failed make[5]: *** [plugin/handler_socket/CMakeFiles/handlersocket.dir/handlersocket/hstcpsvr.cpp.o] Error 1 this is the command line (cd /build_dir/target-x86_64_musl/mariadb-10.2.4; CFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -iremap/build_dir/target-x86_64_musl/mariadb-10.2.4:mariadb-10.2.4 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -fpic " CXXFLAGS="-Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -iremap/build_dir/target-x86_64_musl/mariadb-10.2.4:mariadb-10.2.4 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -fpic " LDFLAGS="-L/staging_dir/target-x86_64_musl/usr/lib -L/staging_dir/target-x86_64_musl/lib -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro " cmake -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_VERSION=1 -DCMAKE_SYSTEM_PROCESSOR=x86_64 -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_C_COMPILER="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc" -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/g++-uc" -DCMAKE_CXX_COMPILER_ARG1="" -DCMAKE_ASM_COMPILER="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc" -DCMAKE_ASM_COMPILER_ARG1="" -DCMAKE_EXE_LINKER_FLAGS:STRING="-L/staging_dir/target-x86_64_musl/usr/lib -L/staging_dir/target-x86_64_musl/lib -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro" -DCMAKE_MODULE_LINKER_FLAGS:STRING="-L/staging_dir/target-x86_64_musl/usr/lib -L/staging_dir/target-x86_64_musl/lib -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro -Wl,-Bsymbolic-functions" -DCMAKE_SHARED_LINKER_FLAGS:STRING="-L/staging_dir/target-x86_64_musl/usr/lib -L/staging_dir/target-x86_64_musl/lib -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro -Wl,-Bsymbolic-functions" -DCMAKE_AR="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc-ar" -DCMAKE_NM="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc-nm" -DCMAKE_RANLIB="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc-ranlib" -DCMAKE_FIND_ROOT_PATH="/staging_dir/target-x86_64_musl/usr;/staging_dir/toolchain-x86_64_gcc-5.4.0_musl" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=BOTH -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY -DCMAKE_STRIP=: -DCMAKE_INSTALL_PREFIX=/usr -DDL_LIBRARY=/staging_dir/target-x86_64_musl -DCMAKE_PREFIX_PATH=/staging_dir/target-x86_64_musl -DCMAKE_SKIP_RPATH=TRUE -DCMAKE_SYSTEM_NAME=Linux -DSTACK_DIRECTION=-1 -DWITH_WSREP=ON -DWITH_INNODB_DISALLOW_WRITES=1 -DCONNECT_WITH_JDBC=OFF -DWITHOUT_TOKUDB=1 -DIMPORT_EXECUTABLES=/build_dir/hostpkg/mariadb-10.2.4/host/import_executables.cmake /build_dir/target-x86_64_musl/mariadb-10.2.4 ) can someone give me an advice ? Regards

2 2

[Maria-discuss] AWS Key Management plugin
by Christopher Hendry 10 May '17

10 May '17

Currently configuring MariaDB for at rest encryption using Amazon key management. A few weeks ago, I setup our primary server with no problems (Centos 7). Recently, working on the same hardware/OS for slaves - when I do a yum install MariaDB-aws-key-management I get: "No package MariaDB-aws-key-management available." I did discover that since the first successful install, the RPM versions have changed from 10.1.22 to 10.1.23 (and have included some config options for 10.2 that need to be commented out). I also believe that originally I had to change plugin-maturity in config = alpha - but that makes no difference now. Anyone know what happened to the plugin? I can copy the original one from my primary server and all works fine - but I don't love that approach. Is aws-key-management plugin still supported? Thanks for any insight. C -- "When you do things right, people won't be sure you've done anything at all."

2 1

Re: [Maria-discuss] MySQL Workbench Fork?
by Federico Razzoli 07 May '17

07 May '17

Well, clicking around, selecting things, switching to keyboards, and so on, can hardly be faster than writing an SQL statement - provided that you learn ALTER TABLE syntax. But, apart from that, I think that we mostly agree on everything except one thing: the meaning of enterprise. In an enterprise environment a DBA needs to automate everything and write scripts. Also, as I wrote before and the author of that post also says, GUI's are not reliable, you never know exactly what they do. That said, I suppose that GUIs can be useful for someone, especially for developers and hobbyists. Cheers, Federico -------------------------------------------- Gio 27/4/17, <info(a)smallbusinessconsultingexperts.com> ha scritto: Oggetto: Re: [Maria-discuss] MySQL Workbench Fork? A: maria-discuss(a)lists.launchpad.net, "Federico Razzoli" <federico_raz(a)yahoo.it> Data: Giovedì 27 Aprile 2017, 20:34 Sure, but don't confuse a post with a fact either. That's great he has an opinion that you share, I am sure I can find many more that say the opposite. What I got from his post is there are some things a gui cannot do, which is of course the case. So? The opposite is true also, if you add the word quickly. That does not make a point as universal true or factual. Should we abandon SNMP and other standards type network consoles (gui) since obviously we can do the same thing without them? You don't see the value is the gui network view? So, workbench feature of showing you a refreshing graphical status of your server isn't useful? It's not complete by any means, but it is useful, just like the connections screen showing running queries. Those are just examples which some will desire to pick on. But I think it's a reasonable view. My point is not guis are (always) better, they each have a place. On Apr 27, 2017, 1:23 PM -0500, Federico Razzoli <federico_raz(a)yahoo.it>, wrote: I've just seen this Quora answer, which lists some good reasons to avoid GUIs. There are others. Again: my point is not "GUI's shouldn't exist", it's just "please don't call them an enterprise software, because they are not". https://www.quora.com/Do-database-administrators-actually-think-that-GUIs-a…

8 8

[Maria-discuss] MySQL Workbench Fork?
by Zach Lym 05 May '17

05 May '17

I convinced my boss to use MariaDB for a new project but it appears that the workbench is incompatible with new features of MariaDB. I've looked at the alternatives listed on the website, but they are all either proprietary or Windows only. I just can't sell my boss on switching to MariaDB without workbench. Free software isn't free, but I think Workbench is a big driver of commercial and enterprise use. It's easy to kvetch from the outside, but I feel as though MariaDB has just lost some ground. Has management considered forking Workbench? Thank you, -Zach Lym

9 12

[Maria-discuss] MariaDB 10.1.23 & 5.5.56 now available
by Daniel Bartholomew 03 May '17

03 May '17

The MariaDB project is pleased to announce the immediate availability of MariaDB 10.1.23, MariaDB 5.5.56 and MariaDB Galera Cluster 5.5.56. All are Stable (GA) releases. See the Release Notes and Changelogs for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB 10.1.23 - Release Notes: https://mariadb.com/kb/en/mdb-10123-rn/ - Changelog: https://mariadb.com/kb/en/mdb-10123-cl/ - Downloads: https://downloads.mariadb.org/mariadb/10.1.23 About MariaDB 10.1: - https://mariadb.com/kb/en/what-is-mariadb-101/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ MariaDB 5.5.56 - Release Notes: https://mariadb.com/kb/en/mdb-5556-rn/ - Changelog: https://mariadb.com/kb/en/mdb-5556-cl/ - Downloads: https://downloads.mariadb.org/mariadb/5.5.56 About MariaDB 5.5: - https://mariadb.com/kb/en/what-is-mariadb-56/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ MariaDB Galera Cluster 5.5.56 - Release Notes: https://mariadb.com/kb/en/mgc-5556-rn/ - Changelog: https://mariadb.com/kb/en/mgc-5556-cl/ - Downloads: https://downloads.mariadb.org/mariadb-galera/5.5.56 About MariaDB Galera Cluster: - https://mariadb.com/kb/en/what-is-mariadb-galera-cluster/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/donate/ We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadbfdn - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

1 0

[Maria-discuss] lz4 innodb compression
by Reinis Rozitis 28 Apr '17

28 Apr '17

Hello, is lz4 support not compiled in the Mariadb rpm (Opensuse) packages or are there some runtime requirements or you have to rebuild from source? MariaDB> set global innodb_compression_algorithm=lz4; ERROR 1231 (42000): Variable 'innodb_compression_algorithm' can't be set to the value of 'lz4' while MariaDB> set global innodb_compression_algorithm=lzo; Query OK, 0 rows affected (0.00 sec) Server version: 10.2.5-MariaDB-log MariaDB Server / OpenSUSE Leap 42.2 / on system: lz4-1.4.0+svn124-3.3.x86_64 liblz4-1_4-1.4.0+svn124-3.3.x86_64 rr

3 4

[Maria-discuss] howto debug “Slave SQL: Error executing row event” and “Node consistency compromized, aborting…” and “Failed to apply trx: source”
by Lukas Lehner 28 Apr '17

28 Apr '17

Hi https://dba.stackexchange.com/questions/172230/howto-debug-slave-sql-error-… any idea? Lukas

1 0

[Maria-discuss] M|17 MariaDB Conference 2017 videos
by Lukas Lehner 27 Apr '17

27 Apr '17

Hi where can I watch M|17 video recordings? Is this planned? Will it be free or only for customers? Lukas

2 1

Re: [Maria-discuss] MySQL Workbench Fork?
by Federico Razzoli 27 Apr '17

27 Apr '17

I've just seen this Quora answer, which lists some good reasons to avoid GUIs. There are others. Again: my point is not "GUI's shouldn't exist", it's just "please don't call them an enterprise software, because they are not". https://www.quora.com/Do-database-administrators-actually-think-that-GUIs-a… Cheers, Federico

2 1

[Maria-discuss] userstats Denied_connections
by Rhys.Campbell＠swisscom.com 27 Apr '17

27 Apr '17

Hello All, I've been using the userstats plugin do debug an application issue and I think there's a bug in the collection of statistics, or at least a case of bad wording... https://mariadb.com/kb/en/mariadb/user-statistics/ DENIED_CONNECTIONS - The number of connections denied to this user. ACCESS_DENIED - The number of times this user's connections issued commands that were denied. A application user was displaying very high "DENIED_CONNECTION" values. This sent us in the direction a bad password was being supplied. Long story short it actually turns out that a series of ALTER TABLE statements were failing, because the application does not have permission to do so. During one our tests DENIED_CONNECTION was 5397 and ACCESS_DENIED was 0. We can see the ALTER TABLE statement failing and DENIED_CONNECTION being incremented quickly. According to the documentation shouldn't this ACCESS_DENIED (which I think might be better named COMMAND_DENIED?). Cheers, Rhys

2 1

[Maria-discuss] Inconsistent Query Results from Dependent Subquery
by Sam Vaughan 27 Apr '17

27 Apr '17

I'm seeing some odd behaviour on MariaDB 10.1.22 that's got me scratching my head. My production servers (a master and two slaves) are returning incorrect query results, but when I run the same query on the same data elsewhere I always get the correct results, even on a VM with matching OS, H/W arch and MariaDB version. The problem is triggered by using "ORDER BY x DESC LIMIT 1" in a dependent subquery on a single table. The query is being run on a small InnoDB table that very rarely changes. Each row contains a date, an integer identifier, a sequence number and a handful of applicable settings that are all integers. Unfortunately I can't create a simplified reproducible test case, but the following example shows the sort of query I'm working with. Imagine a table that looks like this: CREATE TABLE `settings` ( `date` date NOT NULL, `id` int(11) NOT NULL, `seq` int(11) NOT NULL, `value` int(11) NOT NULL, UNIQUE KEY `date_id_seq` (`date`,`id`,`seq`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; The table is designed to store a sequence of values belonging to something identified by the ID. Each sequence of values has a date stamp, and can be replaced at a later date by a new sequence of values: +------------+----+-----+-------+ | date | id | seq | value | +------------+----+-----+-------+ | 2011-11-01 | 1 | 0 | 6 | | 2011-11-01 | 1 | 1 | 3 | | 2011-11-01 | 1 | 2 | 9 | | 2011-11-01 | 2 | 0 | 6 | | 2011-11-01 | 2 | 1 | 1 | | 2011-11-01 | 3 | 0 | 6 | | 2011-11-01 | 3 | 1 | 8 | | 2012-04-01 | 1 | 0 | 4 | | 2012-04-01 | 1 | 1 | 3 | | 2013-06-01 | 3 | 0 | 5 | +------------+----+-----+-------+ The query is asking for all the IDs that had a particular first value set as of a particular date, in this case a first value of 6 as of '2012-07-01': SELECT s1.id FROM settings s1 WHERE s1.seq = 0 and s1.value = 6 and s1.date = ( SELECT s2.date FROM settings s2 WHERE s2.id = s1.id and s2.date <= '2012-07-01' ORDER BY s2.date DESC LIMIT 1 ); This query correctly returns IDs 2 and 3, and not ID 1 since the data for '2012-04-01' overrides the data for '2011-11-01'. In my equivalent situation, my production servers are returning 1, 2 and 3. Everywhere else I try to run it I get just 2 and 3 as expected. The table in question changes rarely, so it's trivial to show that the test system I've set up is working on the same data as the production systems. I've selected the entire table to out-files and diffed them, I've restored the test system from a mysqldump backup of production, and I've even run XtraBackup and prepared it with --export, then followed the instructions to import the table files into my test system just in case there's something weird in the production table's .ibd file. No matter what I do, I can't reproduce the problem anywhere but on my production systems. Testing has shown that minor changes to the query will fix the result set. Changing it to use "max()" instead of "order/limit" fixes it. Removing the date test from the where clause also fixes it. I don't want to just change all my queries like this to use MAX() and be done with it, because this weirdness will always be in the back of my mind. Is my query insufficiently specific? Have my queries of this type only ever returned the right results by accident until I moved to MariaDB recently? I haven't tried adding an index to the date column yet, because it too might make the problem vanish and I'll be none the wiser. I'd rather work out how to make the problem reproducible then dig in further to expose the cause. I thought that my InnoDB file could have been corrupt, but preparing the XtraBackup didn't detect it. Perhaps I've triggered a bug in MariaDB that needs very special conditions to appear? That seems unlikely but I'm at a bit of a loss now. Any suggestions anyone might have would be very gratefully received! Kind regards, Sam

1 0

[Maria-discuss] MariaDB Server maintenance policy for 10.0
by Colin Charles 27 Apr '17

27 Apr '17

Hi! I just read: https://mariadb.org/about/maintenance-policy/ It says the 5 year boundary date for support ending for 10.0 is 31 Mar 2019, and later goes on to specify why 5.5 has a later EOL, "The MariaDB Foundation may decide to maintain selected releases beyond the normal 5 years if they are in exceptionally widespread use. As MariaDB 5.5 is included in multiple prominent Linux distributions with a lifespan beyond 2017, the Foundation is committed in maintaining it until 2020." Is SUSE Enterprise Linux Server 12, with MariaDB Server 10.0, not considered a “prominent Linux distribution”? SLES12 released in 2014, comes with MariaDB Server 10.0, and requires at least 10 years of support (https://www.suse.com/releasenotes/x86_64/SUSE-SLES/12/) Just checking to see if the maintenance policy above is in error Thanks -- Colin Charles, http://bytebot.net/blog/ twitter: @bytebot | skype: colincharles "First they ignore you, then they laugh at you, then they fight you, then you win." -- Mohandas Gandhi

3 4

Re: [Maria-discuss] Are some MyISAM settings used for Aria
by Federico Razzoli 24 Apr '17

24 Apr '17

Hi Jocelyn, The article you linked is quite old, so I wanted to check the source code to find if something changed. I didn't investigate much but I searched in MariaDB's master branch via GitHub. The search strings were 'read_rnd_buffer_size' and 'read-rnd-buffer-size'. I found nothing except for some test files and the variable initialization at server startup. I repeated the same searches in MySQL master branch, and again, I found only tests and initialization. Can you explain this? The variable is unused now? Federico -------------------------------------------- Lun 24/4/17, jocelyn fournier <jocelyn.fournier(a)gmail.com> ha scritto: Oggetto: Re: [Maria-discuss] Are some MyISAM settings used for Aria A: "Sales" <info(a)smallbusinessconsultingexperts.com> Cc: "Maria Discuss" <maria-discuss(a)lists.launchpad.net> Data: Lunedì 24 Aprile 2017, 09:16 Hi Steve, Le 24 avr. 2017 3:28 AM, "Sales" <info(a)smallbusinessconsultingexperts.com> a écrit : On Apr 23, 2017, at 4:12 PM, jocelyn fournier <jocelyn.fournier(a)gmail.com> wrote: Hi Steve, Le 23/04/2017 à 19:32, Sales a écrit : On our system, Mariadb 10.1.22, with aria_used_for_temp_tables = ON, we have a set of MyISAM settings carried over from an earlier setup. Those settings are: key_buffer_size=256M myisam_sort_buffer_size = 64M join_buffer_size=512K bulk_insert_buffer_size=512M read_rnd_buffer_size = 1M read_rnd_buffer_size and join_buffer_size are not MyISAM specific settings, did you try to modify/not modify only those ones ? HTH, Jocelyn Really? So, the doc is wrong? https://mariadb.com/kb/en/ mariadb/server-system- variables/#read_rnd_buffer_ size Says, MyISAM. So, are you saying that is mistaken? If so, that would make sense At least according to https://www.percona.com/blog/2007/07/24/what-exactly-is-read_rnd_buffer_siz… it's not. BTW it has been updated in the mysql manual to mention it optimizes mrr for any engine :https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_read_rnd_buffer_size MariaDB KB would need an update as well. Jocelyn _______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss(a)lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp

3 4

[Maria-discuss] Are some MyISAM settings used for Aria
by Sales 24 Apr '17

24 Apr '17

On our system, Mariadb 10.1.22, with aria_used_for_temp_tables = ON, we have a set of MyISAM settings carried over from an earlier setup. Those settings are: key_buffer_size=256M myisam_sort_buffer_size = 64M join_buffer_size=512K bulk_insert_buffer_size=512M read_rnd_buffer_size = 1M Looking in the information_schema, we have one entire schema of tables still using MyISAM (third party system), and, this schema is not used in any daily processing. The only other MyISAM tables are in the mysql schema. So, nothing else, not one table. The way I understand aria, it should be used instead of MyISAM even for tmp tables given our settings. We have a long running set of programs that do things over night to manage products, many millions of them, ends up processing at least 50 million rows of various tables, thousands of mysql statements. This process has no MyISAM as noted. When I disable the settings above for MyISAM, a significant runtime increase is noted, I’ve repeated this 5 times now over a few week period. The increase is 20%, pretty significant, and that 20% never occurs when not changing settings. So, it would seem unlikely that I am just that unlucky. I am curious as to why those settings for MyISAM would have an impact? There are certainly tmp tables in the process (or internally created tmp tables) and the rest is innodb. Any good potential reason I am missing? I have not really looked into aria much before, read most of the mariadb doc. Maybe I missed something key, it appears likely I did! We have the following somewhat corresponding aria settings: aria_pagecache_buffer_size = 256M aria_sort_buffer_size = 256M Steve

2 3

[Maria-discuss] R: Are some MyISAM settings used for Aria
by Federico Razzoli 24 Apr '17

24 Apr '17

Steve, aria_used_for_temp_tables only affects internally created temporary tables, not the temp tables created explicitly by applications. So I suggest: * check if your applications create MyISAM (temporary) tables * use the slow log (long_query_time=0, min_examine_rows=0) and pt-query-digest to check which queries are slower when you comment those settings Federico -------------------------------------------- Dom 23/4/17, Sales <info(a)smallbusinessconsultingexperts.com> ha scritto: Oggetto: [Maria-discuss] Are some MyISAM settings used for Aria A: maria-discuss(a)lists.launchpad.net Data: Domenica 23 Aprile 2017, 19:32 On our system, Mariadb 10.1.22, with aria_used_for_temp_tables = ON, we have a set of MyISAM settings carried over from an earlier setup. Those settings are: key_buffer_size=256M myisam_sort_buffer_size = 64M join_buffer_size=512K bulk_insert_buffer_size=512M read_rnd_buffer_size = 1M Looking in the information_schema, we have one entire schema of tables still using MyISAM (third party system), and, this schema is not used in any daily processing. The only other MyISAM tables are in the mysql schema. So, nothing else, not one table. The way I understand aria, it should be used instead of MyISAM even for tmp tables given our settings. We have a long running set of programs that do things over night to manage products, many millions of them, ends up processing at least 50 million rows of various tables, thousands of mysql statements. This process has no MyISAM as noted. When I disable the settings above for MyISAM, a significant runtime increase is noted, I’ve repeated this 5 times now over a few week period. The increase is 20%, pretty significant, and that 20% never occurs when not changing settings. So, it would seem unlikely that I am just that unlucky. I am curious as to why those settings for MyISAM would have an impact? There are certainly tmp tables in the process (or internally created tmp tables) and the rest is innodb. Any good potential reason I am missing? I have not really looked into aria much before, read most of the mariadb doc. Maybe I missed something key, it appears likely I did! We have the following somewhat corresponding aria settings: aria_pagecache_buffer_size = 256M aria_sort_buffer_size = 256M Steve _______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss(a)lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp

3 3

Re: [Maria-discuss] Are some MyISAM settings used for Aria
by Federico Razzoli 23 Apr '17

23 Apr '17

Once you see which queries are slower, you can find which changes affected the query. Execution plans are not expected to change when you resize a buffer, but you can measure the effect of resizing the buffers. SHOW GLOBAL STATUS LIKE 'Handler%' can also help you to measure WHICH PART of a query becomes slower/fast after changing a variable. Usually those buffers should be left on their default values. If you really need to change them for some queries (which is not common) the application should do it at session level to avoid impacting the whole workload. Federico -------------------------------------------- Dom 23/4/17, Sales <info(a)smallbusinessconsultingexperts.com> ha scritto: Oggetto: Re: [Maria-discuss] Are some MyISAM settings used for Aria A: "Federico Razzoli" <federico_raz(a)yahoo.it> Cc: maria-discuss(a)lists.launchpad.net Data: Domenica 23 Aprile 2017, 22:59 > On Apr 23, 2017, at 3:00 PM, Federico Razzoli <federico_raz(a)yahoo.it> wrote: > > Steve, > > aria_used_for_temp_tables only affects internally created temporary tables, not the temp tables created explicitly by applications. > So I suggest: > * check if your applications create MyISAM (temporary) tables > * use the slow log (long_query_time=0, min_examine_rows=0) and pt-query-digest to check which queries are slower when you comment those settings > > Federico > Yes, the default engine for tables is innodb as evidenced by default_storage_engine, so, those are not using MyISAM. The default_tmp_storage_engine defaults to nothing, so, according to the doc, this means it uses default_storage_engine, which means innodb again. I was merely pointing out that all temp tables are not using MyISAM, or at least should not be. Have used the slow query log and Percona toolkit with various length settings and did not give much benefit sadly. It showed some queries running longer, but, that did not help too much as far as why since the queries were using optimal query paths. We have many long running queries and that’s fine as these are calculations and mass imports from suppliers, pricing, etc. We’ve just been unable to make sense of the why of it. A second potential hint is mariadb 10.1 has performed slower than mariadb 5.5 on the same machine, and thus far, we’ve been unable to isolate why. It’s not slower by a lot, maybe 5%. The word MyISAM does not exist anywhere in our code. Simple grep -ri shows this. It’s puzzling to me. Kind of makes me want to explicitly set default_tmp_storage_engine just to see if any effect. I am just checking if anything might still use MyISAM despite these settings. It’s not a big deal as the settings don’t use a tremendous amount of memory by any means, but, was hoping to just size MyISAM all the way down. And then became curious as to why this might be. Thanks!

1 0

[Maria-discuss] MariaDB Galera Cluster 5.5.55 and Connector/J 2.0.0 now available
by Daniel Bartholomew 22 Apr '17

22 Apr '17

The MariaDB project is pleased to announce the immediate availability of MariaDB Galera Cluster 5.5.55 Stable (GA) and MariaDB Connector/J 2.0.0 Release Candidate (RC). See the Release Notes and Changelogs for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB Galera Cluster 5.5.55 - Release Notes: https://mariadb.com/kb/en/mgc-5555-rn/ - Changelog: https://mariadb.com/kb/en/mgc-5555-cl/ - Downloads: https://downloads.mariadb.org/mariadb-galera/5.5.55 About MariaDB Galera Cluster: - https://mariadb.com/kb/en/what-is-mariadb-galera-cluster/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ MariaDB Connector/J 2.0.0 - Release Notes: https://mariadb.com/kb/en/mcj-200-rn/ - Changelog: https://mariadb.com/kb/en/mcj-200-cl/ - Downloads: https://downloads.mariadb.org/connector-java/2.0.0/ About MariaDB Connector/J: - https://mariadb.com/kb/en/about-mariadb-connector-j/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/donate/ We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadbfdn - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

1 0

Re: [Maria-discuss] MySQL Workbench Fork?
by Federico Razzoli 20 Apr '17

20 Apr '17

Looks like a lot of people want to use GUIs. Which is absolutely legit, but frankly, I don't agree that any database GUI should be considered enterprise software. Selecting checkboxes and selecting from drop-down menus is much slower, and much more error-prone, than writing SQL queries. I recognize that they allow you to avoid learning ALTER TABLE syntax, which potentially turns a person with no specific skill into a database architect. Is this an enterprise feature? Also, you never really know what you are doing. Some examples? * You read the database size. Where did the GUI read this value? I want to see system tables and file sizes, not values with vague names. * Ok, you just issued an SQL statement. But first, the GUI transparently ran tons of SET statements. What you did is what you wanted to do, or is it the random result of GUI's authors overactive creativity? :) Please, don't misunderstand me. I'm not saying that GUIs are useless or badly designed. But I wouldn't call them enterprise software, and I would not suggest them in a professional environment. Cheers, Federico -------------------------------------------- Gio 20/4/17, <info(a)smallbusinessconsultingexperts.com> ha scritto: Oggetto: Re: [Maria-discuss] MySQL Workbench Fork? A: maria-discuss(a)lists.launchpad.net, "Zach Lym" <zachlym(a)indolering.com> Data: Giovedì 20 Aprile 2017, 21:51 Totally agree. It's an necessary part for us. So many features missing. Tired of their warning too about mariadb. Steve Fatula On Apr 20, 2017, 2:13 PM -0500, Zach Lym <zachlym(a)indolering.com>, wrote: I convinced my boss to use MariaDB for a new project but it appears that the workbench is incompatible with new features of MariaDB. I've looked at the alternatives listed on the website, but they are all either proprietary or Windows only. I just can't sell my boss on switching to MariaDB without workbench. Free software isn't free, but I think Workbench is a big driver of commercial and enterprise use. It's easy to kvetch from the outside, but I feel as though MariaDB has just lost some ground. Has management considered forking Workbench? Thank you, -Zach Lym _______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss(a)lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp _______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss(a)lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp

1 0

[Maria-discuss] innodb table single column index max length
by butler 18 Apr '17

18 Apr '17

we know the mysql have a limit that the max index length on a single column is 767.I want know how the 767 come from ? why not 799 or 800 etc.

2 2

[Maria-discuss] MariaDB 10.3.0 Alpha and 5.5.55 Stable now available
by Daniel Bartholomew 18 Apr '17

18 Apr '17

The MariaDB project is pleased to announce the immediate availability of MariaDB 10.3.0 Alpha and MariaDB 5.5.55 Stable (GA). See the Release Notes and Changelog for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB 10.3.0 - Release Notes: https://mariadb.com/kb/en/mdb-1030-rn/ - Changelog: https://mariadb.com/kb/en/mdb-1030-cl/ - Downloads: https://downloads.mariadb.org/mariadb/10.3.0 About MariaDB 10.3: - https://mariadb.com/kb/en/what-is-mariadb-103/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ MariaDB 5.5.55 - Release Notes: https://mariadb.com/kb/en/mdb-5555-rn/ - Changelog: https://mariadb.com/kb/en/mdb-5555-cl/ - Downloads: https://downloads.mariadb.org/mariadb/5.5.55 About MariaDB 5.5: - https://mariadb.com/kb/en/what-is-mariadb-55/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/donate/ We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadbfdn - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

1 0

[Maria-discuss] logrotate
by Daniel Black 18 Apr '17

18 Apr '17

Quick proof of concept logrotate that hasn't really been changed in a while. The aim is to get this closer to a state for distro maintainers to use directly. By using a dedicated SQL user this shouldn't conflict with an existing user root user (which users always use despite the ability create other users with SUPER privs). As users will occasional change the password on the root without taking into account that logrotate typically uses the same user. Relying on users to update /root/.my.cnf is unreliable. Giving selinux permissions to allow logrotate read files under /root is also a little excessive. Using a dedicated mysqladmin.logrotate this won't conflict with existing mysqladmin group. Adds slow query log and general log to the logrotate script. Binary logs are deliberately omitted (MDEV-11610). https://mariadb.com/kb/en/mariadb/sql_error_log-plugin/ seems to have its own rotation) Proposed changes: https://github.com/MariaDB/server/compare/10.2...grooverdan:10.2-logrotate?… mysqladmin --local uses SET SESSION SQL_LOG_BIN=0 so I'll change its implementation to use FLUSH LOCAL ... which would preserve the need to use RELOAD only privs for logrotate. Thoughts? Difficulties? Suggestions? ref: https://jira.mariadb.org/browse/MDEV-11610 https://jira.mariadb.org/browse/MDEV-5662

3 4

[Maria-discuss] Help explain what a SQL line was INTENDING to do?
by David Karr 17 Apr '17

17 Apr '17

I've used Mariadb for a couple of small projects. I prefer to automate as much of the initial creation and config as possible, using SQL scripts executed from JDBC. I can at least do this for the table creation and population. I'm taking over an existing small project that is organized somewhat funky. There are some scripts that are apparently intended to initialize the database, but I'm seeing one line in one of those scripts that I don't understand, and I don't think is valid. I would appreciate some help explaining what you think this line MIGHT be intending to do: ----------------- ALTER TABLE `project` add column (proj_typ_id TINYINT(2) NOT NULL DEFAULT 1, parent_proj_id int(11, has_children BOOLEAN); ----------------- The first problem is that first paren. There's no matching right paren, so I can't imagine this can succeed. Second, I don't understand much past that first comma. Is this intending to add TWO columns, the second being "parent_proj_id"? Assuming that's the case, what exactly does "int(11, has_children BOOLEAN)" mean? I can see that it's declaring an 11-digit int, but I don't understand the "has_children" part.

2 2

Re: [Maria-discuss] "Error: MySQL server has gone away" issue while running mariadb database
by Daniel Black 12 Apr '17

12 Apr '17

On 11/04/17 15:15, Geunsik Lim wrote: > For reference, We are running web-based front service > with nodejs package + pm2 (http://pm2.keymetrics.io/) on Ubuntu 16.04.1 > server. > > It seems that this issue results from the too big packet size and too > long waiting time > between mariadb server and our nodejs-based web-service. its probably one or the other but not both.. MySQL document is still applicable https://dev.mysql.com/doc/refman/5.7/en/gone-away.html

2 4

[Maria-discuss] "Error: MySQL server has gone away" issue while running mariadb database
by Geunsik Lim 11 Apr '17

11 Apr '17

Recently, I have often been getting the "Error:MySQL server has gone away" message after I enabled the multiple-user access in front web service. Here is logs. . . . Upper Omission . . . 2017-04-10 21:15:22.881 [INFO][socketio.js] socket disconnect 2017-04-10 21:15:23.858 [INFO][socketio.js] socket connection 2017-04-10 21:36:07.635 [INFO][socketio.js] socket disconnect 2017-04-10 21:36:16.635 [INFO][socketio.js] socket disconnect 2017-04-10 21:46:12.254 [INFO][socketio.js] socket disconnect 2017-04-10 21:46:12.255 [INFO][socketio.js] socket disconnect events.js:160 throw er; // Unhandled 'error' event ^ Error: MySQL server has gone away at Error (native) At this time, I have checked the status of mariadb server. Please, see a time stampe information from the below mariadb's status. As we can see, the mariadb server was not stopped or not restarted. root@mytizen:~# systemctl status mysql * mysql.service - LSB: Start and stop the mysql database server daemon Loaded: loaded (/etc/init.d/mysql; bad; vendor preset: enabled) Active: active (running) since 2017-04-10 15:35:34 KST; 15h ago Docs: man:systemd-sysv-generator(8) Process: 1982 ExecStart=/etc/init.d/mysql start (code=exited, status=0/SUCCESS) Tasks: 28 Memory: 131.6M CPU: 29.563s CGroup: /system.slice/mysql.service ├─2544 /bin/bash /usr/bin/mysqld_safe ├─2691 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mysql/plugin --user=my └─2692 logger -t mysqld -p daemon error 4월 10 15:35:31 mytizen mysqld[2692]: 170410 15:35:31 [Note] InnoDB: 128 rollback segment(s) are active. 4월 10 15:35:31 mytizen mysqld[2692]: 170410 15:35:31 [Note] InnoDB: Waiting for purge to start 4월 10 15:35:31 mytizen mysqld[2692]: 170410 15:35:31 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.34-79 4월 10 15:35:31 mytizen mysqld[2692]: 170410 15:35:31 [Note] Plugin 'FEEDBACK' is disabled. 4월 10 15:35:31 mytizen mysqld[2692]: 170410 15:35:31 [Note] Server socket created on IP: '127.0.0.1'. 4월 10 15:35:33 mytizen mysqld[2692]: 170410 15:35:33 [Note] /usr/sbin/mysqld: ready for connections. 4월 10 15:35:33 mytizen mysqld[2692]: Version: '10.0.29-MariaDB-0ubuntu0.16.04.1' socket: '/var/run/mysqld/mysqld.sock 4월 10 15:35:34 mytizen mysql[1982]: ...done. 4월 10 15:35:34 mytizen systemd[1]: Started LSB: Start and stop the mysql database server daemon. 4월 10 15:35:34 mytizen mysql[1982]: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO) root@mytizen:~# root@mytizen:~# ------------------- root@mytizen:~# ls -al /var/run/mysqld/mysqld.sock srwxrwxrwx 1 mysql mysql 0 4 10 15:35 /var/run/mysqld/mysqld.sock After digging the operation functions from the mariadb source ( https://github.com/MariaDB/server) I could get some hints where the issue was generated. For example, a) storage/spider/spd_trx.cc (!conn->disable_reconnect) https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar… b) storage/cassandra/ha_cassandra.cc Anyone who experience a similar issue such as "Error: MySQL server has gone away" message? -- http://leemgs.fedorapeople.org Don't try to avoid pain if you fail. If you decided to face the challenges in life, you can gain a lot by giving your best. Cheolsang Jeong's Book & life --

1 1

[Maria-discuss] Page Compression in production and backup strategies
by Tim Kersten 10 Apr '17

10 Apr '17

Hi folks, Does anyone here use page compression ( https://mariadb.com/kb/en/mariadb/compression/ ) in production? (Or know folks who do?) What prompted my question was seeing that XtraBackup is not supported when using page compression. Given the popularity of the XtraBackup, I'm left wondering if there's some other backup strategy people use (especially since it's also used to sync and provision slaves), or if page compression is simply not used by folks who have master/slave setups, or perhaps don't require backups? Searching has not been helpful in my finding the answer, other than a pull request ( https://github.com/percona/percona-xtrabackup/pull/200 ) by Jan Lindstrom from last year. Hoping you can help, best regards, Tim

3 2

[Maria-discuss] Maraidb 10.1, Dependent Subqueries, much slower than 5.5
by Sales 08 Apr '17

08 Apr '17

We are noticing many dependent subqueries not working as well as they did on Mariadb 5.5, we’re having to add a force index. Relatively simple example: explain update Product_Master pm set Total_Inventory = (select sum(ifnull(pi.Quantity_On_Hand, pi.Other_Quantity)) from Product_Inventory_Summed pi where pi.Product_ID = pm.Product_ID group by pi.Product_ID); +------+--------------------+-------+-------+---------------+---------+---------+------+---------+-------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +------+--------------------+-------+-------+---------------+---------+---------+------+---------+-------------+ | 1 | PRIMARY | pm | index | NULL | PRIMARY | 22 | NULL | 5001829 | | | 2 | DEPENDENT SUBQUERY | pi | ALL | PRIMARY | NULL | NULL | NULL | 1 | Using where | +------+--------------------+-------+-------+---------------+---------+---------+------+---------+——————+ This query runs in a couple of minutes on 5.5, runs for many many hours on 10.1 By adding the force index, it is back to “normal”. explain update Product_Master pm set Total_Inventory = (select sum(ifnull(pi.Quantity_On_Hand, pi.Other_Quantity)) from Product_Inventory_Summed pi force index (PRIMARY) where pi.Product_ID = pm.Product_ID group by pi.Product_ID); +------+--------------------+-------+-------+---------------+---------+---------+---------------------+---------+-------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +------+--------------------+-------+-------+---------------+---------+---------+---------------------+---------+-------+ | 1 | PRIMARY | pm | index | NULL | PRIMARY | 22 | NULL | 5001829 | | | 2 | DEPENDENT SUBQUERY | pi | ref | PRIMARY | PRIMARY | 22 | feeds.pm.Product_ID | 1 | | +------+--------------------+-------+-------+---------------+---------+---------+---------------------+---------+———+ We are using persistent statistics on both tables, so, it knows there are a lot of rows in each. I don’t see any optimizer switches that are turned off. Any hints as to why or is this a current limitation of 10.1? Steve

2 3

Re: [Maria-discuss] mysqladmin - flush failed: Unknown error
by Daniel Black 06 Apr '17

06 Apr '17

On 30/03/17 20:46, Matthew Pash wrote: > Morning Daniel, > > Thanks for your reply, I've been doing some more testing. The logrotate > script (below) currently runs fine when executed manually (sudo > logrotate -v -f /etc/logrotate.d/mysql) but fails when run overnight by > cron. > > /var/log/mysqld.log { > compress > daily > missingok > notifempty > rotate 3 > postrotate > if test -x /usr/bin/mysqladmin && /usr/bin/mysqladmin ping &>/dev/null > then > /usr/bin/mysqladmin flush-logs > fi > endscript > } > > I tweaked it last night to capture the output of the mysqladmin command > and it did this: > > /usr/bin/mysqladmin: connect to server at 'localhost' failed > error: 'Access denied for user 'root'@'localhost' (using password: NO)' > > Which makes me think the problem is more about cron than MariaDB. No, MariaDB doesn't have a passwordless root user that mysqladmin needs to issue the flush-logs command. I suspect that there was originally a root user with socket authentication this system. Even after fixing this the mysqld may not be able to create new logs in /var/log/. I'd normally expect /var/log/mysql to be owned by the mysql user and its configuration to log the error to a file in this directory. > I've > added some extra information gathering, so we'll see how it runs tonight. > > > On 27 March 2017 at 22:34, Daniel Black <daniel.black(a)au1.ibm.com > <mailto:daniel.black@au1.ibm.com>> wrote: > > I think you'll find that the mysql user don't have permissions to create > a new file in /var/log/. As such logrotate renames the file which is > still open by mysqld. As such it is now writing to mysqld.log.1. > > On 28/03/17 00:13, Matthew Pash wrote: > > Hi, > > > > We've got some database servers running MariaDB 10.1.22, and are having > > issues with logrotate. Specifically, after it runs, it leaves a 0 byte > > file and continues writing log data to mysqld.log.1 > > > > Manually running logrotate in verbose mode shows this error from > > mysqladmin when it tries to run -flush_logs: > > > > /usr/bin/mysqladmin: flush failed; error: 'Unknown error' > > error: error running non-shared postrotate script for > > /var/log/mysqld.log of '/var/log/mysqld.log ' > > set default create context > > What does the logrotate script look like? It really should be a "shared" > (in a logrotate way) script. > > > > > Has anyone seen this before? It doesn't look like a permissions error - > > the logs are created fine if you run systemctl restart mariadb. > > Is the log actually writing to /var/log/mysqld.log using systemd? It > normally writes to the journal because with systemd redirects stderr > there > > > From lsof, it looks like /var/log/mysqld.log is being written to by the > mysql process itself: > $ sudo lsof | grep mysqld.log > mysqld 38803 mysql 1w REG 8,3 > 31781 537216904 /var/log/mysqld.log.1 > mysqld 38803 mysql 2w REG 8,3 > 31781 537216904 /var/log/mysqld.log.1 > ... > > > > > > Thanks, > > ~Matt > > > > -- > > *Matthew* > > Senior Systems Administrator, IT Services > > University of Bristol > > > > > > _______________________________________________ > > Mailing list: https://launchpad.net/~maria-discuss > <https://launchpad.net/%7Emaria-discuss> > > Post to : maria-discuss(a)lists.launchpad.net > <mailto:maria-discuss@lists.launchpad.net> > > Unsubscribe : https://launchpad.net/~maria-discuss > <https://launchpad.net/%7Emaria-discuss> > > More help : https://help.launchpad.net/ListHelp > <https://help.launchpad.net/ListHelp> > > > > > > > -- > *Matthew Pash* > Senior Systems Administrator, IT Services > University of Bristol

2 1

[Maria-discuss] MariaDB 10.2.5 RC now available
by Daniel Bartholomew 05 Apr '17

05 Apr '17

The MariaDB project is pleased to announce the immediate availability of MariaDB 10.2.5 Release Candidate (RC). See the Release Notes and Changelog for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB 10.2.5 - Release Notes: https://mariadb.com/kb/en/mdb-1025-rn/ - Changelog: https://mariadb.com/kb/en/mdb-1025-cl/ - Downloads: https://downloads.mariadb.org/mariadb/10.2.5 About MariaDB 10.2: - https://mariadb.com/kb/en/what-is-mariadb-102/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/donate/ We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadbfdn - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

1 0

[Maria-discuss] NOT AGAIN PLEASE
by Federico Razzoli 05 Apr '17

05 Apr '17

Periodically this list becomes an early 90's fashion BBS. For days. It is very interesting to discuss how every single human being except one is an idiot who don't reply messages correctly to emails but 1- After some years, if you didn't convince anyone, maybe you are not totally right. 2- It is a bit off topic here. Maybe setup a list like use-reply-correctly-or-die(a)lists.launchpad.net and use this list to talk about MariaDB? 3- Yes, I wrote the subject in uppercase and killing me is still illegal. What a nasty world. Thanks. Federico -------------------------------------------- Mer 5/4/17, Reindl Harald <h.reindl(a)thelounge.net> ha scritto: Oggetto: Re: [Maria-discuss] searching for etc/my.cnf and CMAKE_INSTALL_PREFIX A: "Maria Discuss" <maria-discuss(a)lists.launchpad.net> Data: Mercoledì 5 Aprile 2017, 19:23 Am 05.04.2017 um 19:14 schrieb MARK CALLAGHAN: > Why do you need to shout about this? why don't you bring ANY specific reasoining for your sloppy "Maybe someone should edit the too strong claims" - anyways - if someone is too dumb to respond just to the list instead reply-all and convert plaintext mails in the quote to HTML all is said.... > On Wed, Apr 5, 2017 at 10:04 AM, Reindl Harald <h.reindl(a)thelounge.net > <mailto:h.reindl@thelounge.net>> wrote: > > > > Am 05.04.2017 um 18:57 schrieb MARK CALLAGHAN: > > It is different from upstream MySQL in many ways as that page > explains. > > > bla - if it woul dbe just a recompile from the mysql sources it > would not be a fork - in 99.9% of all cases IT IS a > drop-in-replacement - if you have REAL issues name them - period > > On Wed, Apr 5, 2017 at 8:03 AM, Reindl Harald > <h.reindl(a)thelounge.net <mailto:h.reindl@thelounge.net> > <mailto:h.reindl@thelounge.net <mailto:h.reindl@thelounge.net>>> > wrote: > > and why? > > it is and where it isn't unintentional report it and help to > get it > fixed, that said from a admin which dozens of MariaDB > servers where > the datadir was originally created on Windows under MySQL > 3.x, got > moved in prduction for some years to MacOS, later to Linux > and now > is running MariaDB 10.1 just fine with the same datadirs and the > help of "mysql_upgrade" over the years > > > Am 05.04.2017 um 16:50 schrieb MARK CALLAGHAN: > > Maybe someone should edit the too strong claims > on > https://mariadb.com/kb/en/mariadb/mariadb-vs-mysql-compatibility/ > <https://mariadb.com/kb/en/mariadb/mariadb-vs-mysql-compatibility/> > > <https://mariadb.com/kb/en/mariadb/mariadb-vs-mysql-compatibility/ > <https://mariadb.com/kb/en/mariadb/mariadb-vs-mysql-compatibility/>> > > In bold at the top of the page... > > > MariaDB is a binary drop in replacement for MySQL > > > On Tue, Apr 4, 2017 at 9:58 PM, Sergei Golubchik > <serg(a)mariadb.org <mailto:serg@mariadb.org> > <mailto:serg@mariadb.org <mailto:serg@mariadb.org>>> wrote: > > Hi, Mark! > > On Apr 04, Mark Callaghan wrote: > > With upstream (5.6 and 5.7) MySQL when I use cmake > > -DCMAKE_INSTALL_PREFIX=$X, then after I install > the build, > mysqld searches > > in $X/etc for my.cnf. That is not true for MariaDB > Server > 10.2. Why can't > > this match upstream? > > > It certainly can. It just doesn't. Because we merge > from 5.6 into > MariaDB feature by feature, and nobody has requested > this > particular > feature so far. At least I couldn't find it in Jira. > > Regards, > Sergei > Chief Architect MariaDB > and security(a)mariadb.org > <mailto:security@mariadb.org> <mailto:security@mariadb.org > <mailto:security@mariadb.org>> _______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss(a)lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp

2 1

[Maria-discuss] restore db from dump?
by l vic 05 Apr '17

05 Apr '17

Hello, I have "mydump.sql" with dump of all databases in cluster. I am trying to selectively restore one database only from the scenario below: Have created 2 databases: test1 and test2 with table "person": +-------+--------------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------+--------------+------+-----+---------+-------+ | name | varchar(255) | YES | | NULL | | +-------+--------------+------+-----+---------+-------+ Insert name "one" into table "person" for both databases: insert into person values ('name'); Backup all data into "mysqldump.sql": mysqldump -P3306 -uroot -pdbpass --all-databases >mysqldump.sql drop database test2 (my mistake); and insert additional data into "test1": insert into person values ('name1'); insert into person values ('name2'); Now, i'd like to restore database test2 only: mysql -uroot -pdbpass -e "create database if not exists test2;" mysql -uroot -pdbpass test2 < mysqldump.sql Success !! test2 is restored with all the data, but when I'checked "test1" i only see one record "name" - two records that I've added after backup are lost It looks as mysql just restore all data in dump file, regardless of specifying the "target" database. Is that expected, or do i have some error in my backup/restore procedure? If this is expected, is there some comprehensive method to restore one database selectively? Thanks, vl

3 3

[Maria-discuss] searching for etc/my.cnf and CMAKE_INSTALL_PREFIX
by MARK CALLAGHAN 05 Apr '17

05 Apr '17

With upstream (5.6 and 5.7) MySQL when I use cmake -DCMAKE_INSTALL_PREFIX=$X, then after I install the build, mysqld searches in $X/etc for my.cnf. That is not true for MariaDB Server 10.2. Why can't this match upstream? -- Mark Callaghan mdcallag(a)gmail.com

3 8

Re: [Maria-discuss] searching for etc/my.cnf and CMAKE_INSTALL_PREFIX
by Federico Razzoli 05 Apr '17

05 Apr '17

Or maybe people can file bugs/feature requests when they think they have a "practical purpose". If those bugs are ignored, then yes, the page should be edited :) Federico -------------------------------------------- Mer 5/4/17, MARK CALLAGHAN <mdcallag(a)gmail.com> ha scritto: Oggetto: Re: [Maria-discuss] searching for etc/my.cnf and CMAKE_INSTALL_PREFIX A: "Sergei Golubchik" <serg(a)mariadb.org> Cc: "Maria Discuss" <maria-discuss(a)lists.launchpad.net> Data: Mercoledì 5 Aprile 2017, 16:50 Maybe someone should edit the too strong claims on https://mariadb.com/kb/en/mariadb/mariadb-vs-mysql-compatibility/ In bold at the top of the page... MariaDB is a binary drop in replacement for MySQL On Tue, Apr 4, 2017 at 9:58 PM, Sergei Golubchik <serg(a)mariadb.org> wrote: Hi, Mark! On Apr 04, Mark Callaghan wrote: > With upstream (5.6 and 5.7) MySQL when I use cmake > -DCMAKE_INSTALL_PREFIX=$X, then after I install the build, mysqld searches > in $X/etc for my.cnf. That is not true for MariaDB Server 10.2. Why can't > this match upstream? It certainly can. It just doesn't. Because we merge from 5.6 into MariaDB feature by feature, and nobody has requested this particular feature so far. At least I couldn't find it in Jira. Regards, Sergei Chief Architect MariaDB and security(a)mariadb.org -- Mark Callaghan mdcallag(a)gmail.com _______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss(a)lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp

1 0

[Maria-discuss] thanks for ROW
by Federico Razzoli 04 Apr '17

04 Apr '17

Dear MariaDB team, I have just read carefully this KB page: https://mariadb.com/kb/en/mariadb/row/ Thank you for implementing the ROW type in procedures. We talked about procedures limitations several times in this list, and this is clearly a step in increasing usability and power. Cheers, Federico

1 0

Re: [Maria-discuss] Cross compile error
by Daniel Black 01 Apr '17

01 Apr '17

On this error I'm not sure. Looks to be some sort of inheritance hierarchy that is different in musl from glibc et al. I'd chase them up to see who is violating the C++ spec. Have you tried using buildroot? It has a stable 10.1 version that is kept up to date and it has the one outstanding uclibc patch (that is waiting in jira https://jira.mariadb.org/browse/MDEV-10841) On 26/03/17 02:52, Lucian Cristian wrote: > Hi > > I'm trying to cross compile (any 10.* versions) using musl and uClibc++ > for a LEDE/Openwrt system and I have problems with these errors: > > > staging_dir/target-x86_64_musl/usr/include/uClibc++/associative_base:444:8: > error: 'void std::__base_associative<Key, ValueType, Compare, > Allocator>::swap(std::__base_associative<Key, ValueType, Compare, > Allocator>&) [with Key = dict_foreign_t*; ValueType = dict_foreign_t*; > Compare = dict_foreign_compare; Allocator = > ut_allocator<dict_foreign_t*>]' is protected > void __base_associative<Key, ValueType, Compare, > Allocator>::swap(__base_associative<Key, ValueType, Compare, Allocator>& m) > ^ > build_dir/target-x86_64_musl/mariadb-10.2.4/storage/innobase/dict/dict0dict.cc:1996:32: > error: within this context > table->foreign_set.swap(fk_set); > ^ > storage/innobase/CMakeFiles/innobase.dir/build.make:542: recipe for > target 'storage/innobase/CMakeFiles/innobase.dir/dict/dict0dict.cc.o' > failed > > > > staging_dir/target-x86_64_musl/usr/include/uClibc++/map: In > instantiation of 'std::map<Key, T, Compare, Allocator>::reference > std::map<Key, T, Compare, Allocator>::operator[](const key_type&) [with > Key = const char*; T = dict_index_t*; Compare = ut_strcmp_functor; > Allocator = ut_allocator<std::pair<const char*, dict_index_t*> >; > std::map<Key, T, Compare, Allocator>::reference = std::pair<const char*, > dict_index_t*>&; std::map<Key, T, Compare, Allocator>::key_type = const > char*]': > build_dir/target-x86_64_musl/mariadb-10.2.4/storage/innobase/dict/dict0stats.cc:2518:22: > required from here > staging_dir/target-x86_64_musl/usr/include/uClibc++/map:143:13: error: > invalid initialization of reference of type 'std::map<const char*, > dict_index_t*, ut_strcmp_functor, ut_allocator<std::pair<const char*, > dict_index_t*> > >::reference {aka std::pair<const char*, > dict_index_t*>&}' from expression of type 'dict_index_t*' > return i->second; > ^ > storage/innobase/CMakeFiles/innobase.dir/build.make:614: recipe for > target 'storage/innobase/CMakeFiles/innobase.dir/dict/dict0stats.cc.o' > failed > > > > build_dir/target-x86_64_musl/mariadb-10.2.4/plugin/handler_socket/handlersocket/hstcpsvr.cpp: > In constructor 'dena::hstcpsvr::hstcpsvr(const dena::config&)': > build_dir/target-x86_64_musl/mariadb-10.2.4/plugin/handler_socket/handlersocket/hstcpsvr.cpp:92:37: > error: invalid initialization of non-const reference of type > 'std::auto_ptr<volatile dena::database_i>&' from an rvalue of type > 'dena::database_ptr {aka std::auto_ptr<volatile dena::database_i>}' > cshared.dbptr = database_i::create(c); > ^ > In file included from > staging_dir/target-x86_64_musl/usr/include/uClibc++/vector:22:0, > from > build_dir/target-x86_64_musl/mariadb-10.2.4/plugin/handler_socket/handlersocket/hstcpsvr.cpp:12: > > staging_dir/target-x86_64_musl/usr/include/uClibc++/memory:137:12: > note: initializing argument 1 of 'std::auto_ptr<T>& > std::auto_ptr<T>::operator=(std::auto_ptr<T>&) [with T = volatile > dena::database_i]' > auto_ptr& operator=(auto_ptr& p) throw(){ > ^ > plugin/handler_socket/CMakeFiles/handlersocket.dir/build.make:134: > recipe for target > 'plugin/handler_socket/CMakeFiles/handlersocket.dir/handlersocket/hstcpsvr.cpp.o' > failed > make[5]: *** > [plugin/handler_socket/CMakeFiles/handlersocket.dir/handlersocket/hstcpsvr.cpp.o] > Error 1 > > > this is the command line > > (cd /build_dir/target-x86_64_musl/mariadb-10.2.4; CFLAGS="-Os -pipe > -fno-caller-saves -fno-plt -fhonour-copts > -Wno-error=unused-but-set-variable -Wno-error=unused-result > -iremap/build_dir/target-x86_64_musl/mariadb-10.2.4:mariadb-10.2.4 > -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 > -Wl,-z,now -Wl,-z,relro -fpic " CXXFLAGS="-Os -pipe -fno-caller-saves > -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable > -Wno-error=unused-result > -iremap/build_dir/target-x86_64_musl/mariadb-10.2.4:mariadb-10.2.4 > -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 > -Wl,-z,now -Wl,-z,relro -fpic " > LDFLAGS="-L/staging_dir/target-x86_64_musl/usr/lib > -L/staging_dir/target-x86_64_musl/lib > -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib > -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro " cmake > -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_VERSION=1 > -DCMAKE_SYSTEM_PROCESSOR=x86_64 -DCMAKE_BUILD_TYPE=Release > -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" > -DCMAKE_C_COMPILER="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc" > -DCMAKE_C_COMPILER_ARG1="" > -DCMAKE_CXX_COMPILER="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/g++-uc" > -DCMAKE_CXX_COMPILER_ARG1="" > -DCMAKE_ASM_COMPILER="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc" > -DCMAKE_ASM_COMPILER_ARG1="" > -DCMAKE_EXE_LINKER_FLAGS:STRING="-L/staging_dir/target-x86_64_musl/usr/lib > -L/staging_dir/target-x86_64_musl/lib > -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib > -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro" > -DCMAKE_MODULE_LINKER_FLAGS:STRING="-L/staging_dir/target-x86_64_musl/usr/lib > -L/staging_dir/target-x86_64_musl/lib > -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib > -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro > -Wl,-Bsymbolic-functions" > -DCMAKE_SHARED_LINKER_FLAGS:STRING="-L/staging_dir/target-x86_64_musl/usr/lib > -L/staging_dir/target-x86_64_musl/lib > -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/usr/lib > -L/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/lib -znow -zrelro > -Wl,-Bsymbolic-functions" > -DCMAKE_AR="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc-ar" > -DCMAKE_NM="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc-nm" > -DCMAKE_RANLIB="/staging_dir/toolchain-x86_64_gcc-5.4.0_musl/bin/x86_64-openwrt-linux-musl-gcc-ranlib" > -DCMAKE_FIND_ROOT_PATH="/staging_dir/target-x86_64_musl/usr;/staging_dir/toolchain-x86_64_gcc-5.4.0_musl" > -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=BOTH > -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY > -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY -DCMAKE_STRIP=: > -DCMAKE_INSTALL_PREFIX=/usr -DDL_LIBRARY=/staging_dir/target-x86_64_musl > -DCMAKE_PREFIX_PATH=/staging_dir/target-x86_64_musl > -DCMAKE_SKIP_RPATH=TRUE -DCMAKE_SYSTEM_NAME=Linux -DSTACK_DIRECTION=-1 > -DWITH_WSREP=ON -DWITH_INNODB_DISALLOW_WRITES=1 -DCONNECT_WITH_JDBC=OFF > -DWITHOUT_TOKUDB=1 > -DIMPORT_EXECUTABLES=/build_dir/hostpkg/mariadb-10.2.4/host/import_executables.cmake > /build_dir/target-x86_64_musl/mariadb-10.2.4 ) > > > can someone give me an advice ? > > Regards > > > _______________________________________________ > Mailing list: https://launchpad.net/~maria-discuss > Post to : maria-discuss(a)lists.launchpad.net > Unsubscribe : https://launchpad.net/~maria-discuss > More help : https://help.launchpad.net/ListHelp >

2 1

[Maria-discuss] MariaDB memory usage
by Selvam 31 Mar '17

31 Mar '17

Hi, Hi, I have MariaDB 10.1.19 with 1 GB of RAM on (AWS RDS) and another one with 4 GB of RAM (production instance). Memory usage keeps on increasing on both. Free memory goes below 50MB. InnoDB status shows "History list length 2671". My total table count is 225 and shows around 10 GB of data for them. I am giving the InnoDB engine status for your reference below, I would be happy to get any pointers on this issue. ===================================== 2017-03-31 10:53:08 2b25f6ec2700 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 41 seconds ----------------- BACKGROUND THREAD ----------------- srv_master_thread loops: 6695 srv_active, 0 srv_shutdown, 187084 srv_idle srv_master_thread log flush and writes: 193768 ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 77210 OS WAIT ARRAY INFO: signal count 212544 Mutex spin waits 201779, rounds 289254, OS waits 5769 RW-shared spins 71644, rounds 1292843, OS waits 28918 RW-excl spins 27933, rounds 1582253, OS waits 41414 Spin rounds per wait: 1.43 mutex, 18.05 RW-shared, 56.64 RW-excl ------------ TRANSACTIONS ------------ Trx id counter 106794202 Purge done for trx's n:o < 106794191 undo n:o < 0 state: running but idle History list length 3618 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 106794062, not started MySQL thread id 110715, OS thread handle 0x2b25f6ec2700, query id 5020955 182.71.229.138 ebuser init SHOW ENGINE INNODB STATUS ---TRANSACTION 106794201, not started MySQL thread id 8, OS thread handle 0x2b25a2703700, query id 5020954 localhost 127.0.0.1 rdsadmin cleaning up ---TRANSACTION 106028547, not started MySQL thread id 1, OS thread handle 0x2b25a2681700, query id 0 Waiting for background binlog tasks -------- FILE I/O -------- I/O thread 0 state: waiting for completed aio requests (insert buffer thread) I/O thread 1 state: waiting for completed aio requests (log thread) I/O thread 2 state: waiting for completed aio requests (read thread) I/O thread 3 state: waiting for completed aio requests (read thread) I/O thread 4 state: waiting for completed aio requests (read thread) I/O thread 5 state: waiting for completed aio requests (read thread) I/O thread 6 state: waiting for completed aio requests (write thread) I/O thread 7 state: waiting for completed aio requests (write thread) I/O thread 8 state: waiting for completed aio requests (write thread) I/O thread 9 state: waiting for completed aio requests (write thread) Pending normal aio reads: 0 [0, 0, 0, 0] , aio writes: 0 [0, 0, 0, 0] , ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 748253 OS file reads, 1159722 OS file writes, 187669 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s ------------------------------------- INSERT BUFFER AND ADAPTIVE HASH INDEX ------------------------------------- Ibuf: size 1, free list len 101, seg size 103, 63021 merges merged operations: insert 49746, delete mark 141267, delete 44296 discarded operations: insert 0, delete mark 0, delete 0 29.05 hash searches/s, 1.85 non-hash searches/s --- LOG --- Log sequence number 150636062402 Log flushed up to 150636062402 Pages flushed up to 150636062402 Last checkpoint at 150636062402 Max checkpoint age 216721613 Checkpoint age target 209949063 Modified age 0 Checkpoint age 0 0 pending log writes, 0 pending chkp writes 138085 log i/o's done, 0.00 log i/o's/second ---------------------- BUFFER POOL AND MEMORY ---------------------- Total memory allocated 3021996032; in additional pool allocated 0 Total memory allocated by read views 416 Internal hash tables (constant factor + variable factor) Adaptive hash index 262562512 (46748264 + 215814248) Page hash 366056 (buffer pool 0 only) Dictionary cache 13611078 (11688592 + 1922486) File system 960472 (812272 + 148200) Lock system 7306496 (7305416 + 1080) Recovery system 0 (0 + 0) Dictionary memory allocated 1922486 Buffer pool size 180216 Buffer pool size, bytes 2952658944 Free buffers 8193 Database pages 158851 Old database pages 58475 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 1247738, not young 25033050 0.00 youngs/s, 0.00 non-youngs/s Pages read 748000, created 43142, written 994180 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 158851, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---------------------- INDIVIDUAL BUFFER POOL INFO ---------------------- ---BUFFER POOL 0 Buffer pool size 22527 Buffer pool size, bytes 369082368 Free buffers 1025 Database pages 19861 Old database pages 7311 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 98238, not young 2723636 0.00 youngs/s, 0.00 non-youngs/s Pages read 92864, created 5425, written 135077 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 19861, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 1 Buffer pool size 22527 Buffer pool size, bytes 369082368 Free buffers 1024 Database pages 19853 Old database pages 7308 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 95625, not young 3098260 0.00 youngs/s, 0.00 non-youngs/s Pages read 89244, created 5544, written 116844 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 19853, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 2 Buffer pool size 22527 Buffer pool size, bytes 369082368 Free buffers 1024 Database pages 19851 Old database pages 7307 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 128795, not young 3109159 0.00 youngs/s, 0.00 non-youngs/s Pages read 96654, created 5166, written 121945 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 19851, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 3 Buffer pool size 22527 Buffer pool size, bytes 369082368 Free buffers 1024 Database pages 19847 Old database pages 7306 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 305308, not young 4040408 0.00 youngs/s, 0.00 non-youngs/s Pages read 96897, created 5125, written 135851 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 19847, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 4 Buffer pool size 22527 Buffer pool size, bytes 369082368 Free buffers 1024 Database pages 19852 Old database pages 7308 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 128721, not young 3047134 0.00 youngs/s, 0.00 non-youngs/s Pages read 94024, created 5765, written 126032 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 19852, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 5 Buffer pool size 22527 Buffer pool size, bytes 369082368 Free buffers 1024 Database pages 19860 Old database pages 7311 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 146912, not young 2641167 0.00 youngs/s, 0.00 non-youngs/s Pages read 94359, created 5540, written 120390 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 19860, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 6 Buffer pool size 22527 Buffer pool size, bytes 369082368 Free buffers 1024 Database pages 19872 Old database pages 7315 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 96242, not young 3087412 0.00 youngs/s, 0.00 non-youngs/s Pages read 88868, created 4950, written 119917 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 19872, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] ---BUFFER POOL 7 Buffer pool size 22527 Buffer pool size, bytes 369082368 Free buffers 1024 Database pages 19855 Old database pages 7309 Modified db pages 0 Percent of dirty pages(LRU & free pages): 0.000 Max dirty pages percent: 75.000 Pending reads 0 Pending writes: LRU 0, flush list 0, single page 0 Pages made young 247897, not young 3285874 0.00 youngs/s, 0.00 non-youngs/s Pages read 95090, created 5627, written 118124 0.00 reads/s, 0.00 creates/s, 0.00 writes/s Buffer pool hit rate 1000 / 1000, young-making rate 0 / 1000 not 0 / 1000 Pages read ahead 0.00/s, evicted without access 0.00/s, Random read ahead 0.00/s LRU len: 19855, unzip_LRU len: 0 I/O sum[0]:cur[0], unzip sum[0]:cur[0] -------------- ROW OPERATIONS -------------- 0 queries inside InnoDB, 0 queries in queue 0 read views open inside InnoDB 0 RW transactions active inside InnoDB 0 RO transactions active inside InnoDB 0 out of 1000 descriptors used Main thread process no. 9357, id 47444582741760, state: sleeping Number of rows inserted 1455191, updated 16167028, deleted 1399680, read 1844055639 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 30.83 reads/s Number of system rows inserted 3, updated 641, deleted 3, read 20758 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.12 reads/s ---------------------------- END OF INNODB MONITOR OUTPUT ============================ -- Regards, Selvam KnackForge <http://knackforge.com>

1 0

[Maria-discuss] semi-sync replication rpl_semi_sync_master_clients question ?
by Ljr Yang 29 Mar '17

29 Mar '17

HI, we have many groups master slave , used semi-sync are normal. but there a group master and slave , semi-sync status show have a little question. master: 10.1.0.61 (MariaDB 10.1.22) slave1 : 10.1.0.62 (MariaDB 10.1.22) slave2: 10.1.0.63 (MariaDB 10.1.22) three machine's semi-sync parameter: rpl_semi_sync_master_enabled ON rpl_semi_sync_master_timeout 10000 rpl_semi_sync_master_wait_point AFTER_COMMIT rpl_semi_sync_slave_enabled ON on master: SHOW GLOBAL STATUS LIKE '%semi%' ; *Rpl_semi_sync_master_clients 1 # should show : 2 * ...... on slave1: stop slave io_thread; then on master: SHOW GLOBAL STATUS LIKE '%semi%' ; *Rpl_semi_sync_master_clients ０* on slave1: start slave io_thread; on master: SHOW GLOBAL STATUS LIKE '%semi%' ; *Rpl_semi_sync_master_clients 1* on slave2: stop slave io_thread; then on master: SHOW GLOBAL STATUS LIKE '%semi%' ; *Rpl_semi_sync_master_clients ０* on slave2: start slave io_thread; on master: SHOW GLOBAL STATUS LIKE '%semi%' ; *Rpl_semi_sync_master_clients 1* *on slave1 and slave2 , I had uninstall and reinstall semi-sync plugin, * *still show **Rpl_semi_sync_master_clients is 1* I don't know where config have question? please you help, thanks

2 4

[Maria-discuss] mysqladmin - flush failed: Unknown error
by Matthew Pash 27 Mar '17

27 Mar '17

Hi, We've got some database servers running MariaDB 10.1.22, and are having issues with logrotate. Specifically, after it runs, it leaves a 0 byte file and continues writing log data to mysqld.log.1 Manually running logrotate in verbose mode shows this error from mysqladmin when it tries to run -flush_logs: /usr/bin/mysqladmin: flush failed; error: 'Unknown error' error: error running non-shared postrotate script for /var/log/mysqld.log of '/var/log/mysqld.log ' set default create context Has anyone seen this before? It doesn't look like a permissions error - the logs are created fine if you run systemctl restart mariadb. Thanks, ~Matt -- *Matthew* Senior Systems Administrator, IT Services University of Bristol

2 1

[Maria-discuss] MariaDB Galera Cluster 10.0.30 and Connector/J 1.5.9 now available
by Daniel Bartholomew 22 Mar '17

22 Mar '17

The MariaDB project is pleased to announce the immediate availability of MariaDB Galera Cluster 10.0.30 and MariaDB Connector/J 1.5.9. These are both stable (GA) releases. See the Release Notes and Changelogs for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB Galera Cluster 10.0.30 - Release Notes: https://mariadb.com/kb/en/mgc-10030-rn/ - Changelog: https://mariadb.com/kb/en/mgc-10030-cl/ - Downloads: https://downloads.mariadb.org/mariadb-galera/10.0.30 About MariaDB Galera Cluster: - https://mariadb.com/kb/en/what-is-mariadb-galera-cluster/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ MariaDB Connector/J 1.5.9 - Release Notes: https://mariadb.com/kb/en/mcj-159-rn/ - Changelog: https://mariadb.com/kb/en/mcj-159-cl/ - Downloads: https://downloads.mariadb.org/connector-java/1.5.9/ About MariaDB Connector/J: - https://mariadb.com/kb/en/about-mariadb-connector-j/ - - Developers Meetup and M|17 User Conference in April - - - - - - - The MariaDB Foundation is hosting a MariaDB Developers Meetup from 9-10 April in New York City. This event is being held in conjunction with the MariaDB Corporation sponsored M|17 MariaDB User Conference being held from 11-12 April, also in NYC. Details on both events can be found at: - https://mariadb.org/2017-developers-meetup-new-york/ - https://m17.mariadb.com/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/donate/ We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadbfdn - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

1 0

[Maria-discuss] Can not build MariaDB 10.0.30 and 10.1.22 with Visual Studio 2013
by Ayano Kosaka 22 Mar '17

22 Mar '17

Hi, I can not build MariaDB 10.0.30 and 10.1.22 with Visual Studio 2013 on Windows 7 Pro 64 bit. `identifier "int64_t" is undefined` occurs at `storage/xtradb/btr/btr0cur.cc`. It is probably caused by the following merge commit: [Merge branch 'merge-xtradb-5.6' into 10.0] https://github.com/MariaDB/server/commit/83da1a1e572d67588b66724b34fdb7f079… Before this commit, `ib_int64_t` (the typedef, which wraps compiler differences, in `../include/univ.i`) is used instead of `int64_t`. This error does not occur on VS2015, because it has `int64_t`. But VS2013 does not have `int64_t`. Were the supported compilers changed? Or, a bug or my environmental problem? Regards, Ayano Kosaka

3 2

[Maria-discuss] Problem Upgrade MariaDb 5.5.52 MariaDb 10.1.22
by Wilmer Arambula 21 Mar '17

21 Mar '17

Hi, i have a system running perfectly on mariadb 5.5.52, i will change everything to a new server with mariadb 10.1.22, but running the installation script gives me problems, this is the error, is there any way to configure mariadb 10.1.22 To omit this error, since mariadb 10.1.22 works with strict-trans-table, there is some old_mode feature that allows this. QUERY: CREATE TABLE `media_gallery_music` ( `gallery_id` INT(11) UNSIGNED NOT NULL AUTO_INCREMENT, `value_id` INT(11) UNSIGNED NOT NULL, `artwork_url` VARCHAR(255) COLLATE utf8_unicode_ci NOT NULL, `name` VARCHAR(255) COLLATE utf8_unicode_ci NOT NULL, `position` INT(11) NOT NULL, PRIMARY KEY (`gallery_id`) ) ENGINE=INNODB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci; CREATE TABLE `media_gallery_music_album` ( `album_id` INT(11) UNSIGNED NOT NULL AUTO_INCREMENT, `gallery_id` INT(11) UNSIGNED NOT NULL, `name` VARCHAR(255) COLLATE utf8_unicode_ci NOT NULL, `artwork_url` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `podcast_url` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `artist_name` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `type` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, PRIMARY KEY (`album_id`), KEY `KEY_GALLERY_ID` (`gallery_id`) ) ENGINE=INNODB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci; CREATE TABLE `media_gallery_music_elements` ( `position_id` INT(11) UNSIGNED NOT NULL AUTO_INCREMENT, `gallery_id` INT(11) UNSIGNED DEFAULT NULL, `album_id` INT(11) UNSIGNED DEFAULT NULL, `track_id` INT(11) UNSIGNED DEFAULT NULL, `position` INT(11) NOT NULL, PRIMARY KEY (`position_id`), KEY `KEY_GALLERY_ID` (`gallery_id`), KEY `KEY_ALBUM_ID` (`album_id`), KEY `KEY_TRACK_ID` (`track_id`) ) ENGINE=INNODB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci; CREATE TABLE `media_gallery_music_track` ( `track_id` INT(11) UNSIGNED NOT NULL AUTO_INCREMENT, `album_id` INT(11) UNSIGNED DEFAULT NULL, `gallery_id` INT(11) UNSIGNED DEFAULT NULL, `name` VARCHAR(255) COLLATE utf8_unicode_ci NOT NULL, `duration` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `artwork_url` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `artist_name` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `album_name` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `price` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `currency` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `purchase_url` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `stream_url` VARCHAR(255) COLLATE utf8_unicode_ci NOT NULL, `type` VARCHAR(255) COLLATE utf8_unicode_ci DEFAULT NULL, `position` INT(11) NOT NULL, PRIMARY KEY (`track_id`), KEY `KEY_ALBUM_ID` (`album_id`), KEY `KEY_GALLERY_ID` (`gallery_id`) ) ENGINE=INNODB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci; ALTER TABLE `media_gallery_music_album` ADD FOREIGN KEY `FK_GALLERY_ID`(`gallery_id`) REFERENCES `media_gallery_music` (`gallery_id`) ON DELETE CASCADE ON UPDATE CASCADE; ALTER TABLE `media_gallery_music_elements` ADD FOREIGN KEY `FK_GALLERY_ID` (`gallery_id`) REFERENCES `media_gallery_music` (`gallery_id`) ON DELETE CASCADE ON UPDATE CASCADE, ADD FOREIGN KEY `FK_ALBUM_ID` (`album_id`) REFERENCES `media_gallery_music_album` (`album_id`) ON DELETE CASCADE ON UPDATE CASCADE, ADD FOREIGN KEY `FK_TRACK_ID` (`track_id`) REFERENCES `media_gallery_music_track` (`track_id`) ON DELETE CASCADE ON UPDATE CASCADE; ALTER TABLE `media_gallery_music_track` ADD FOREIGN KEY `FK_ALBUM_ID` (`album_id`) REFERENCES `media_gallery_music_album` (`album_id`) ON DELETE CASCADE ON UPDATE CASCADE, ADD FOREIGN KEY `FK_GALLERY_ID` (`gallery_id`) REFERENCES `media_gallery_music` (`gallery_id`) ON DELETE CASCADE ON UPDATE CASCADE; Work perfect MariaDb 5.5.52. Error MariaDb 10.1.22: Query : ALTER TABLE `media_gallery_music_elements` ADD FOREIGN KEY `FK_GALLERY_ID` (`gallery_id`) REFERENCES `media_gallery_musi... Error Code : 1005 Can't create table `test`.`#sql-c82_1086` (errno: 121 "Duplicate key on write or update") Execution Time : 00:00:00:000 Transfer Time : 00:00:00:000 Total Time : 00:00:00:000 I can manually modify and fix the error, but it is a system with many scripts and updates, is there any way to omit this error in Mariadb 10.1.22. Thks, -- *Wilmer.*

3 2

[Maria-discuss] sst failure?
by l vic 21 Mar '17

21 Mar '17

What can case the following problem? [Warning] WSREP: Failed to prepare for incremental state transfer: Local state UUID (00000000-0000-0000-0000-000000000000) does not match group state UUID (2cd97600-0e4e-11e7-997a-0a414b1bb17e): 1 (Operation not permitted) at galera/src/replicator_str.cpp:prepare_for_IST():482. IST will be unavailable. [Note] WSREP: Member 1.0 () requested state transfer from '*any*'.

1 0

Re: [Maria-discuss] Problem Upgrade MariaDb 5.5.52 MariaDb 10.1.22
by Wilmer Arambula 21 Mar '17

21 Mar '17

Thanks for your answer, I understand perfectly, but this is an old system, I understand the procedure of the update, but I thought there was some old_mode configuration only to run that database with the options of mariadb 5.5.52 in mariadb 10.1.22. Thks, Wilmer. 2017-03-21 16:19 GMT-04:00 Reindl Harald <h.reindl(a)thelounge.net>: > >> >> >> Am 21.03.2017 um 21:08 schrieb Wilmer Arambula: >> >>> Hi, ihave a system running perfectly on mariadb 5.5.52, i will change >>> everything to a new server with mariadb 10.1.22, but running the >>> installation script gives me problems, this is the error, is there any >>> way to configure mariadb 10.1.22 To omit this error, since mariadb >>> 10.1.22 works with strict-trans-table, there is some old_mode feature >>> that allows this. >>> >>> Query : ALTER TABLE `media_gallery_music_elements` ADD FOREIGN >>> KEY `FK_GALLERY_ID` (`gallery_id`) REFERENCES `media_gallery_musi... >>> >>> Error Code : 1005 >>> Can't create table `test`.`#sql-c82_1086` (errno: 121 "Duplicate key on >>> write or update") >>> >>> Execution Time : 00:00:00:000 >>> Transfer Time : 00:00:00:000 >>> Total Time : 00:00:00:000 >>> >>> I can manually modify and fix the error, but it is a system with many >>> scripts and updates, is there any way to omit this error in Mariadb >>> 10.1.22 >>> >> >> either you have unique keys or not >> >> however why not first upgrade to 10.0.x and why working with dumps >> instead just as others do for many many years an dbrought their server from >> mysql3 to mariadb 10.1 - this is not postgresql >> >> * upgrade 10.x >> * mysql_upgrade -u root -p >> * upgrade 10.1.x >> * mysql_upgrade -u root -p >> >> no, not on the live-server, on a virtual machine where you first rsync >> your datadir, play the upgrades and finally when you have a working plan >> after the last retry rsync the datadir to the new liveserver >> >> >> _______________________________________________ >> Mailing list: https://launchpad.net/~maria-discuss >> Post to : maria-discuss(a)lists.launchpad.net >> Unsubscribe : https://launchpad.net/~maria-discuss >> More help : https://help.launchpad.net/ListHelp >> > > >

1 0

[Maria-discuss] Missing MariaDB Seal logos?
by Colin Charles 20 Mar '17

20 Mar '17

Hi! Visiting: https://mariadb.com/kb/en/mariadb/branding-guidelines/ You’ll note that the Powered by MariaDB badges still exist (https://mariadb.org/about/logos/) — they should really say Powered by MariaDB Server But what is missing are all the seal logos? Currently beyond the archives at Wikimedia Commons (https://commons.wikimedia.org/wiki/File:Mariadb-seal-browntext.svg) they seem to have disappeared Is this just an oversight and something that needs fixing? Thanks -- Colin Charles, http://bytebot.net/blog/ twitter: @bytebot | skype: colincharles "First they ignore you, then they laugh at you, then they fight you, then you win." -- Mohandas Gandhi

2 1

[Maria-discuss] Questions to temporary myisam table files
by Hempel, Sebastian 20 Mar '17

20 Mar '17

Hallo, there is a known issue with the repair table function (MDEV-5871, MDEV-8475), which was fixed in MariaDB 10. Which is fine, but we have still MariaDB 5.5 server running. So we created our own repairtable function to work around this problem. For that function I like to know all possible file extensions for temporary myisam table files. For me temporary myisam table files are these files which are generated when calling "check table", "repair table" or other database functions. Thanks Sebastian

2 3

[Maria-discuss] Exclusive lock not working
by Jesse Schalken 20 Mar '17

20 Mar '17

I have a transaction that checks if a row exists with a particular value and if not, generates the data for that row and inserts it: -- schema CREATE TABLE test ( col INT, data TEXT, KEY (col) ); -- transaction START TRANSACTION; SELECT * FROM test WHERE col = 4 FOR UPDATE; -- If no results, generate data and insert INSERT INTO test SET col = 4, data = 'generated data goes here'; COMMIT; The problem I have is that if two copies of this transaction run concurrently (with the queries interleaved), they both pass the SELECT and deadlock on the INSERT. I would expect that the SELECT would acquire an exclusive lock on "col = 4" so only one transaction will proceed to insert, but the "FOR UPDATE" seems to behave as a shared lock instead. What is the correct way to write this transaction so only one copy proceeds to generate the "data" string and insert the row? (I originally posted this on Stack Overflow here <https://stackoverflow.com/questions/42547629/insert-row-if-not-exists-witho…> .) Thanks

2 2

[Maria-discuss] MariaDB 10.1.22 now available
by Daniel Bartholomew 19 Mar '17

19 Mar '17

The MariaDB project is pleased to announce the immediate availability of MariaDB 10.1.22. This is a stable (GA) release. See the Release Notes and Changelogs for details. - - Links - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - MariaDB 10.1.22 - Release Notes: https://mariadb.com/kb/en/mdb-10122-rn/ - Changelog: https://mariadb.com/kb/en/mdb-10122-cl/ - Downloads: https://downloads.mariadb.org/mariadb/10.1.22 About MariaDB 10.1: - https://mariadb.com/kb/en/what-is-mariadb-101/ APT and YUM Repository Configuration Generator: - https://downloads.mariadb.org/mariadb/repositories/ - - MariaDB Webinars - - - - - - - - - - - - - - - - - - - - - - - - - There are several upcoming MariaDB-focused webinars and many previously held ones available to watch on an on-demand basis at: - https://mariadb.com/news-events/webinars - - MariaDB Books - - - - - - - - - - - - - - - - - - - - - - - - - - There is an ever-growing library of MariaDB books available to help you get the most out of MariaDB. See the MariaDB Books page for details and links: - https://mariadb.com/kb/en/mariadb/books/ - - User Feedback plugin - - - - - - - - - - - - - - - - - - - - - - - MariaDB includes a User Feedback plugin. This plugin is disabled by default. If enabled, it submits basic, completely anonymous MariaDB usage information. This information is used by the developers to track trends in MariaDB usage to better guide development efforts. If you would like to help make MariaDB better, please add "feedback=ON" to your my.cnf or my.ini file! See http://mariadb.com/kb/en/user-feedback-plugin for more information. - - Quality - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The project always strives for quality, but in reality, nothing is perfect. Please take time to report any issues you encounter at: - http://mariadb.org/jira - - Support MariaDB - - - - - - - - - - - - - - - - - - - - - - - - - If you would like to contribute to the MariaDB Foundation, please see the "contributing" and "donations" pages. We also have merchandise available in a cafepress store. All proceeds go to support the MariaDB Foundation. - https://mariadb.com/kb/en/contributing - https://mariadb.org/donate/ We hope you enjoy MariaDB! -- MariaDB Website - http://mariadb.org Twitter - http://twitter.com/mariadbfdn - http://twitter.com/mariadb Google+ - http://google.com/+mariadb Facebook - http://fb.com/MariaDB.dbms Knowledge Base - http://mariadb.com/kb

3 11