- discuss - lists.mariadb.org

[Maria-discuss] 10.3.x: unknown variable 'innodb_support_xa=1'
by Reindl Harald 03 Sep '19

03 Sep '19

unknown variable 'innodb_support_xa=1' would you funny guys consider things like deperectaion warnings in previous releases or at least offer an option to change all these fucking "i don't know a option because it was removed or you did not compile something in and hence i refuse to start the server" to warnings?

6 23

[Maria-discuss] mariadb + FIPS
by Captain Wiggum 02 Sep '19

02 Sep '19

Hi All, I have searched the archives and forums and cannot find an answer to this question. Does mariadb support FIPS, and if so, how or where is a document about this. I use mariadb 10.3.17 with OpenSSL 1.0.2 with FIPS enabled, all built from source. In FIPS mode, SHA1 is disallowed by openssl, as required by FIPS. However, when I search the mariadb code, SHA1 is used in many places. How can I update mariadb to use sha256, without a ton of recoding? Any tips appreciated. --Capt

4 5

Re: [Maria-discuss] mariadb + FIPS
by Captain Wiggum 02 Sep '19

02 Sep '19

+ list On Mon, Sep 2, 2019 at 12:27 PM Captain Wiggum <captwiggum(a)gmail.com> wrote: > Thanks Ian for your reply. > The link mentioned how to enable FIPS mode at the system level. > But nothing about how to setup mariadb *server* when the system is in > FIPS mode. > The mariadb server uses SHA1, which openssl has disabled due to FIPS mode. > > * Unfortunately it is looking like mariadb *server* is not compatible > with FIPS. >

2 1

[Maria-discuss] SST issue with Rsync
by battossai 26 Aug '19

26 Aug '19

Hello, Anyone can share some info with my current issue ? I started to configure Galera Cluster with MariaDB 10.2. When second server try to join there is error on SST transfer like below : rsyncd[8453]: rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at io.c(504) [receiver=3.1.2] Is it any help how to solve this problem ? Database size on Donor server arround 10GB. Thank you in advance. Regards, Franky Yu

1 0

[Maria-discuss] updating passwords
by Jeff Dyke 25 Aug '19

25 Aug '19

So i've been on a bit of a quest to nail down the reasons i can't autodeploy (via saltstack) mariadb-grants and mariadb-users. But this has nothing to do with saltstack, as i've boiled it down to direct commands executed on 10.3.17 Using ALTER USER foo@'bar' seems to double encode the password: MariaDB [mysql]> select User, Host, Password from user where User = 'jeff'; +------+----------+-------------------------------------------+ | User | Host | Password | +------+----------+-------------------------------------------+ | jeff | 172.16.% | *D02D4C65F4A93325D91DC9E07D45521A8CD2960B | +------+----------+-------------------------------------------+ 1 row in set (0.000 sec) MariaDB [mysql]> alter user jeff@'172.16.%' identified by '*D02D4C65F4A93325D91DC9E07D45521A8CD2960B'; Query OK, 0 rows affected (0.000 sec) MariaDB [mysql]> select User, Host, Password from user where User = 'jeff'; +------+----------+-------------------------------------------+ | User | Host | Password | +------+----------+-------------------------------------------+ | jeff | 172.16.% | *42EF65913FAC3841BEFC25DBCBBB800364B91853 | +------+----------+-------------------------------------------+ 1 row in set (0.000 sec) MariaDB [mysql]> alter user jeff@'172.16.%' identified with mysql_native_password as '*D02D4C65F4A93325D91DC9E07D45521A8CD2960B'; Query OK, 0 rows affected (0.000 sec) MariaDB [mysql]> select User, Host, Password from user where User = 'jeff'; +------+----------+-------------------------------------------+ | User | Host | Password | +------+----------+-------------------------------------------+ | jeff | 172.16.% | *D02D4C65F4A93325D91DC9E07D45521A8CD2960B | +------+----------+-------------------------------------------+ MariaDB [mysql]> select password('*D02D4C65F4A93325D91DC9E07D45521A8CD2960B'); +-------------------------------------------------------+ | password('*D02D4C65F4A93325D91DC9E07D45521A8CD2960B') | +-------------------------------------------------------+ | *42EF65913FAC3841BEFC25DBCBBB800364B91853 | +-------------------------------------------------------+ I can use SET PASSWORD FOR.... MariaDB [mysql]> set password for jeff@'172.16.%' = '*D02D4C65F4A93325D91DC9E07D45521A8CD2960B'; Query OK, 0 rows affected (0.000 sec) MariaDB [mysql]> select User, Host, Password from user where User = 'jeff'; +------+----------+-------------------------------------------+ | User | Host | Password | +------+----------+-------------------------------------------+ | jeff | 172.16.% | *D02D4C65F4A93325D91DC9E07D45521A8CD2960B | +------+----------+-------------------------------------------+ but as you can see above, i can not use alter user jeff@'172.16.%' identified by 'hash' without using mysql_native_password as 'hashed_password' If this does not have enough info i'm glad to give it. if you can decrypt the hash, bully its not my real password :) Thanks and Best, Jeff

2 2

Re: [Maria-discuss] Subquery conversion off-switch
by pslawek83 17 Aug '19

17 Aug '19

Hi Sergei, that would be great as well and i was actually looking to emulate off switch using threshold so sure, optimizer switch seems to make more sense. I'm just looking for any way of disabling this optimization without recompiling the server if possible. Thanks, Slawomir Dnia 16 sierpnia 2019 17:14 Sergei Golubchik <serg(a)mariadb.org> napisał(a): Hi, Slawomir! On Aug 13, pslawek83 wrote: Hi Guys, is in_predicate_conversion_th going to be re-enabled for release builds in some next mariadb release? If I make pull request, will you take it? Basically for everyone not aware about the issue, this forced IN-predicate to subquery conversion is de-generating some simple queries so badly that they start to take couple of hours instead of seconds, and there is currently no way of fixing these queries nor to turn this conversion off. Thanks, Slawomir. Perhaps instead of in_predicate_conversion_thresh we'd better add an optimizer switch to disable this optimization? I've commented in jira.mariadb.org jira.mariadb.org Regards, Sergei VP of MariaDB Server Engineering and security(a)mariadb.org

1 0

[Maria-discuss] Subquery conversion off-switch
by pslawek83 16 Aug '19

16 Aug '19

Hi Guys, is in_predicate_conversion_th going to be re-enabled for release builds in some next mariadb release? If I make pull request, will you take it? Basically for everyone not aware about the issue, this forced IN-predicate to subquery conversion is de-generating some simple queries so badly that they start to take couple of hours instead of seconds, and there is currently no way of fixing these queries nor to turn this conversion off. Thanks, Slawomir.

2 1

[Maria-discuss] Disk increase with MAD and MAI extension files in tmp dir
by Kevin DG 07 Aug '19

07 Aug '19

Hello all, MariaDB version -> 10.3.14 Recently, we had a new problem with our MariaDB instance. Indeed, suddenly the size of the tmp directory has increased almost instantaneously, to finish saturating the disk. We have encountered this problem twice and don't understand currently the problem origin. The result of 'ls -l /tmp' during the problem: mysql@16c212e7dbb5:/tmp# ls -l total 126786988 -rw-rw---- 1 mysql mysql 14190428160 Jul 8 15:18 '#sql_1_1.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:02 '#sql_1_1.MAI' -rw-rw---- 1 mysql mysql 13344178176 Jul 8 15:18 '#sql_1_11.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:02 '#sql_1_11.MAI' -rw-rw---- 1 mysql mysql 13344546816 Jul 8 15:18 '#sql_1_14.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:02 '#sql_1_14.MAI' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:18 '#sql_1_2.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:18 '#sql_1_2.MAI' -rw-rw---- 1 mysql mysql 12613459968 Jul 8 15:20 '#sql_1_25.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:03 '#sql_1_25.MAI' -rw-rw---- 1 mysql mysql 12221440000 Jul 8 15:20 '#sql_1_26.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:03 '#sql_1_26.MAI' -rw-rw---- 1 mysql mysql 12220719104 Jul 8 15:20 '#sql_1_29.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:03 '#sql_1_29.MAI' -rw-rw---- 1 mysql mysql 12220907520 Jul 8 15:20 '#sql_1_36.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:03 '#sql_1_36.MAI' -rw-rw---- 1 mysql mysql 14190247936 Jul 8 15:18 '#sql_1_4.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:02 '#sql_1_4.MAI' -rw-rw---- 1 mysql mysql 12220588032 Jul 8 15:18 '#sql_1_47.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:03 '#sql_1_47.MAI' -rw-rw---- 1 mysql mysql 13350912000 Jul 8 15:18 '#sql_1_6.MAD' -rw-rw---- 1 mysql mysql 8192 Jul 8 15:02 '#sql_1_6.MAI' We failed to identify the origin of this behaviour. Does anyone know what can trigger this behavior ? We also failed to find a configuration paramater to avoid and limit the size of these files, any ideas about that ? Thanks for your help,

4 4

[Maria-discuss] Connector/C Bulk Select With Embedded Server
by Seth Shelnutt 05 Aug '19

05 Aug '19

Hello All, I am working on a project where I am using an embedded MariaDB server to issue select queries. I'm currently looking for the most efficient way to get the result set from a query using the C Connector with the embedded server. Ideally I'd like to do a bulk column wise fetch of the results. I have seen the example [1] for bulk column wise prepared statements but this appears only to be for insert/update/delete operations and not select/mysql_stmt_bind_results. The column wise insert format is almost exactly what I was hoping for, just need it for selects. I glanced at the code path for bulk operations and it doesn't look to cover selects. I also tested setting the STMT_ATTR_ARRAY_SIZE to no effect. Is there an efficient way to get the results sets in columnar format or is fetching each row one at a time the best method? Thank you, Seth [1] https://mariadb.com/kb/en/library/bulk-insert-column-wise-binding/

1 0

[Maria-discuss] Can you fix it so that you can email reply to Jira tickets?
by Justin Swanhart 05 Aug '19

05 Aug '19

2 2