Dear MariaDB Developers,
I have an issue with RocksDB, as it takes a lot of Memory after
performing a Bulk Load, taking almost 30GB of RAM Memory after data
ingestion.
My question is: ¿How can I flush RocksDB Compactation MemTables after
the Data Bulk Load? ¿Is there any FLUSH TABLES ROCKSDB command sort
of?
Thank you,
Juan
Here is my.ini Configuration:
########################################################################
########################################################################
########### MARIADB: TORNADO24 CONFIGURATION FILE - ROCKSDB ############
########################################################################
########################################################################
#########################################################################
############################# client ####################################
#########################################################################
# The following options will be passed to all MariaDB clients
[client]
port = 3305
#socket = /tmp/mysql.sock
socket = C:/Program Files/MariaDB 10.3/data/mysql.sock
#pid-file = C:/Program Files/MariaDB 10.3/data/mysql.pid
default-character-set = latin1
# Here follows entries for some specific programs
#########################################################################
############################ mariadb ####################################
#########################################################################
[mariadb]
#local_infile = 1
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# |||||||||||||||||||||||||||||| GENERAL |||||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# The MariaDB server
[mysqld]
port = 3305
#socket = /tmp/mysql.sock
socket = C:/Program Files/MariaDB 10.3/data/mysql.sock
#pid-file = C:/Program Files/MariaDB 10.3/data/mysql.pid
tmpdir = F:/MariaDB 10.3/temp/
# Table type which is used by default when creating new tables, if not
# specified differently during the CREATE TABLE statement.
# The default storage engine that will be used when new tables are created.
default-storage-engine = rocksdb
# Default storage engine that will be used for tables created with
# CREATE TEMPORARY TABLE (Whichever this Engine, Aria Engine will always
# be used for internal temporary tables, as materialized tables in subqueries,
# or other internal tables). RocksDB does not perform well for Temporary Tables,
# which require fast INSERT INTO...VALUES in Loops (For example: Cursors).
default_tmp_storage_engine = aria
# The default character set that will be used when a new schema or table is
# created and no character set is defined
character-set-server = latin1_bin
collation-server = latin1_spanish_ci
# Set the SQL mode to strict
# Default: sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
sql_mode = ""
# *************************** OTHER *********************************** #
group_concat_max_len = 1048576
event_scheduler = ON
net_write_timeout = 3600
net_read_timeout = 3600
#local_infile = 1
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||| DATA STORAGE |||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# Path to the database root
datadir = F:/MariaDB 10.3/data
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# |||||||||||||||||||||||||||||| SAFETY ||||||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# The maximum size of a query packet the server can handle as well as
# maximum query size server can process (Important when working with
# large BLOBs). enlarged dynamically, for each connection.
max_allowed_packet = 512M
# Maximum amount of errors allowed per host. If this limit is reached,
# the host will be blocked from connecting to the MariaDB server until
# "FLUSH HOSTS" has been run or the server was restarted. Invalid
# passwords and other errors during the connect phase result in
# increasing this value. See the "Aborted_connects" status variable for
# global counter.
max_connect_errors = 1000
# Secure File Priv.
# Disabled: secure-file-priv="C:/ProgramData/MySQL/MySQL Server 5.7/Uploads/"
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# |||||||||||||||||||||||| CACHES AND LIMITS |||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size = 512M
# Maximum allowed size for a single HEAP (in memory) table. This option
# is a protection against the accidential creation of a very large HEAP
# table which could otherwise use up all memory resources.
max_heap_table_size = 1024M
# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size = 1M
# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before. This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size = 256
# The maximum amount of concurrent sessions the MariaDB server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
# Low value choosen is order to reduce RAM Memory Allocation.
max_connections = 50
# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_open_cache = 4096
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||| LOGGING ||||||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# General and Slow logging.
log-output='FILE,TABLE'
general-log=0
general_log_file="NGALARRETA-P700.log"
# Error Logging.
log-error = C:/Program Files/MariaDB
10.3/data/NGALARRETA-P700-error.log
log_queries_not_using_indexes = 0
slow-query-log = 0
slow-query-log-file = C:/Program Files/MariaDB
10.3/data/NGALARRETA-P700-slow.log
long_query_time = 1800
# Binary Logging.
# log-bin
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||| ALL ENGINES ||||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# Sort buffer is used to perform sorts for some ORDER BY and GROUP BY
# queries. If sorted data does not fit into the sort buffer, a disk
# based merge sort is used instead - See the "Sort_merge_passes"
# status variable. Allocated per thread if sort is needed.
# If you see many sort_merge_passes per second in SHOW GLOBAL STATUS
# output, you can consider increasing the sort_buffer_size value to
# speed up ORDER BY or GROUP BY operations that cannot be improved with
# query optimization or improved indexing.
# Commented for choosing default values.
sort_buffer_size = 256K
# This buffer is used for the optimization of full JOINs (JOINs without
# indexes). Such JOINs are very bad for performance in most cases
# anyway, but setting this variable to a large value reduces the
# performance impact. See the "Select_full_join" status variable for a
# count of full JOINs. Allocated per thread if full join is found
# The minimum size of the buffer that is used for plain index scans, range
# index scans, and joins that do not use indexes and thus perform full
# table scans.
# Commented for Default Value.
join_buffer_size = 256K
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# |||||||||||||||||||||||||||||| OTHERS ||||||||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# back_log is the number of connections the operating system can keep in
# the listen queue, before the MariaDB connection manager thread has
# processed them. If you have a very high connection rate and experience
# "connection refused" errors, you might need to increase this value.
# Check your OS documentation for the maximum value of this parameter.
# Attempting to set back_log higher than your operating system limit
# will have no effect.
# You need to increase this only if you expect a large number of
# connections in a short period of time.
back_log = 150
# Only cache result sets that are smaller than this limit. This is to
# protect the query cache of a very large result set overwriting all
# other query results.
query_cache_limit = 2M
# Minimum word length to be indexed by the full text search index.
# You might wish to decrease it if you need to search for shorter words.
# Note that you need to rebuild your FULLTEXT index, after you have
# modified this value.
ft_min_word_len = 3
# Thread stack size to use. This amount of memory is always reserved at
# connection time. MariaDB itself usually needs no more than 64K of
# memory, while if you use your own stack hungry UDF functions or your
# OS requires more stack for some operations, you might need to set this
# to a higher value.
thread_stack = 297K
# Set the default transaction isolation level. Levels available are:
# READ-UNCOMMITTED, READ-COMMITTED, REPEATABLE-READ, SERIALIZABLE
# This variable's name might change to tx_isolation in future versions
# of MariaDB
transaction-isolation = REPEATABLE-READ
# Set the query cache type. 0 for OFF, 1 for ON and 2 for DEMAND.
query_cache_type=0
# The number of table definitions (from .frm files) that can be stored
# in the definition cache. If you use a large number of tables, you can
# create a large table definition cache to speed up opening of tables.
# The table definition cache takes less space and does not use file
# descriptors, unlike the normal table cache.
# The minimum and default values are both 400.
table_definition_cache=1400
# If the value of this variable is greater than 0, a replication slave
# synchronizes its master.info file to disk.
# (using fdatasync()) after every sync_master_info events.
sync_master_info=10000
# If the value of this variable is greater than 0, the MySQL server
# synchronizes its relay log to disk.
# (using fdatasync()) after every sync_relay_log writes to the relay log.
sync_relay_log=10000
# If the value of this variable is greater than 0, a replication
# slave synchronizes its relay-log.info file to disk.
# (using fdatasync()) after every sync_relay_log_info transactions.
sync_relay_log_info=10000
#########################################################################
########################## REPLICATION ##################################
#########################################################################
# Server Id.
# Used to identify master and slave servers in replication. The server_id
# must be unique for each server in the replicating group. If left at 0,
# the default, a slave will not connect to a master, and a master will
# refuse all slave connections.
# server_id=0
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
#
# binary logging format - mixed recommended
#binlog_format=mixed
# *** Replication related settings
# Unique server identification number between 1 and 2^32-1. This value
# is required for both master and slave hosts. It defaults to 1 if
# "master-host" is not set, but will MariaDB will not function as a master
# if it is omitted.
# server-id = 1
#
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# changes in this file to the variable values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# Make the slave read-only. Only users with the SUPER privilege and the
# replication slave thread will be able to modify data on it. You can
# use this to ensure that no applications will accidently modify data on
# the slave instead of the master
#read_only
#########################################################################
######################### innodb (Skipped) ##############################
#########################################################################
skip-innodb
############################################################################################################################
############################################################################################################################
############################################################################################################################
# MariaDB ROCKSDB Engine Server Variables Performance-Tuning
(Optimized 50/50 Snappy)
############################################################################################################################
############################################################################################################################
############################################################################################################################
#############################################################################################################################
# rocksdb_block_size
#############################################################################################################################
# NOTES:
# a) I/O Unit (Not fully Aligned).
# b) Default is 4KB. 16 KB gives better space savings, but needs extra
CPU for decompression.
# c) Measure trade-offs between 4K, 8K, 16K and 32 K.
# d) Check the size of data of the block cache in DB_BLOCK_CACHE_USAGE
Column of the INFORMATION_SCHEMA.ROCKSDB_DBSTATS table.
rocksdb_block_size = 8192 # Default Value: 4096 (4K)
#############################################################################################################################
# rocksdb_block_cache_size
#############################################################################################################################
# DESCRIPTION: Block_cache size for RocksDB.
# NOTES: RocksDB’s Internal Cache. Similar to innodb_buffer_pool_size,
but less important since RocksDB relies on OS cache too.
# Set Variable depending on objective "Commit(kB)" to be set in RAM
Memory by the "mysqld" process.
rocksdb_block_cache_size = 2G # Default: 512 MB
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Index & Filter Blocks
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# IMPORTANT: Both Options MUST always be set to ON (1) in order to
limit resources to rocksdb_block_cache_size Memory to the
# objective "Commit" Load.
# rocksdb_cache_index_and_filter_blocks: If you set
cache_index_and_filter_blocks to true, index and filter blocks
# will be stored in block cache, together with all other data blocks.
#
# This allows to effectively limit allocated resources.
#
# rocksdb_pin_l0_filter_and_index_blocks_in_cache: Minimizes
performance impact of rocksdb_cache_index_and_filter_blocks = ON,
# in order to effectively limit resources without a decrease in performance.
rocksdb_cache_index_and_filter_blocks = 1
rocksdb_pin_l0_filter_and_index_blocks_in_cache = 1
#############################################################################################################################
# ROCKSDB WAL Configuration Settings
#############################################################################################################################
# NOTES:
# Control Maximum WAL Size.
# Setting as large as total InnoDB Log Size would be fine.
rocksdb_max_total_wal_size = 4G # Default: 0
rocksdb_wal_dir = F:/MariaDB 10.3/data
# rocksdb_wal_dir: Recommended to set the WAL path on a different SSD
(Whenever its possible).
#############################################################################################################################
# rocksdb_max_background_jobs
#############################################################################################################################
# DEFINITION: Maximum number of concurrent background jobs, including
flushes and compactions. RocksDB will automatically
# decide how to allocate the available job slots to flushes and compactions.
# VALUE RANGE: -1 to 64.
# DEFAULT: 2.
# WARNING: This option must be used with MariaDB 10.3.8 as
“rocksdb_max_background_compactions”
# and “rocksdb_max_background_flushes” variables have been DEPRECATED.
rocksdb_max_background_jobs = 36
#############################################################################################################################
# rocksdb_lock_wait_timeout
#############################################################################################################################
# DESCRIPTION: Number of seconds to wait for lock.
rocksdb_lock_wait_timeout = 2 # Default: 1
#############################################################################################################################
# rocksdb_max_open_files
#############################################################################################################################
# NOTE:
# a) Increase file descriptor limit for mysqld process (Increase
nofile in /etc/security/limits.conf)
# b) If setting greater than 0, RocksDB still uses table_cache, which
will lock a mutex every time you access the file.
# I think you'll see much greater benefit with -1 because then you
will not need to go through LRUCache to get the table you
# need.
#
# IMPORTANT: Keep all files Open! (-1)
#
rocksdb_max_open_files = -1 # Default Value: -1
#############################################################################################################################
# rocksdb_db_write_buffer_size
#############################################################################################################################
# DESCRIPTION: This is the maximum size of all Write Buffers across
all Collumn Families in the database.
# It represents the amount of data to build up in memory (backed by an
unsorted log on disk) across all
# column families before writing to a sorted on-disk file.
#
# "Total size of memtables across column families". This can be used
to manage the total memory used by memtables.
#
# This is distinct from write_buffer_size, which enforces a limit for
a single memtable.
#
# By default this feature is disabled (by being set to 0). You should
not need to change it.
rocksdb_db_write_buffer_size = 4G # Default Value: 0 (Disabled).
#############################################################################################################################
# Other Configurations (CF Options)
#############################################################################################################################
rocksdb_table_cache_numshardbits = 6 # Default: 6. Optimal 50/50 Snappy: 6.
# -----------------------------------------------------------------------------------
# Options to Enable or Disable
# -----------------------------------------------------------------------------------
# NOTE: "allow_mmap_reads" cannot be used with "use_direct_reads" or
"use_direct_io_for_flush_and_compaction". Otherwise Server
# CRASHES.
rocksdb_allow_mmap_reads = 1 # Default: 0 # Useful for SSD Disks. Do
not set with Spinning Disks.
rocksdb_allow_mmap_writes = 0 # Default: 0
rocksdb_use_fsync = 0 # Default: 0
rocksdb_use_adaptive_mutex = 0 # Default: 0
# -----------------------------------------------------------------------------------
# Rate Limiter
# -----------------------------------------------------------------------------------
rocksdb_bytes_per_sync = 512000 # Default: 0. Optimal: 512 KB.
rocksdb_wal_bytes_per_sync = 4194304 # Default: 0. Set to 4MB.
rocksdb_rate_limiter_bytes_per_sec = 419430400 # Default: 0. Set to
400 MB/s. Increase if you're running on higher.
# -----------------------------------------------------------------------------------
# Triggering Compaction if there are many Sequential Deletes
# -----------------------------------------------------------------------------------
# NOTE: DESCRIPTION: "RocksDB will trigger compaction for the file if
it has more than the specified number
# of sequential deletes per window".
rocksdb_compaction_sequential_deletes_count_sd=1 # Default: 0
rocksdb_compaction_sequential_deletes=199999 # Default: 0
rocksdb_compaction_sequential_deletes_window=200000 # Default: 0
# -----------------------------------------------------------------------------------
# Max Subcompactations
# -----------------------------------------------------------------------------------
# DESCRIPTION: This value represents the maximum number of threads
that will concurrently perform a compaction job by breaking it into
multiple,
# smaller ones that are run simultaneously.
# DEFAULT: 1 (i.e. no subcompactions)
#
# NOTES: L0 to L1 compaction cannot be parallelized. In some cases, it
may become a bottleneck that limit the total
# compaction speed. In this case, users can set max_subcompactions to
more than 1. In this case, we'll try to partition the
# range and use multiple threads to execute it.
#
# Set up compression more aggressively and allocate more threads for
flush and compaction.
rocksdb_max_subcompactions = 2 # Default: 1
#############################################################################################################################
# Override cf options for RocksDB.
#############################################################################################################################
rocksdb_default_cf_options="write_buffer_size=512m;max_bytes_for_level_base=2048m;target_file_size_base=256m;max_bytes_for_level_multiplier=10;max_write_buffer_number=12;min_write_buffer_number_to_merge=4;target_file_size_multiplier=1;level0_file_num_compaction_trigger=1;level0_slowdown_writes_trigger=36;level0_stop_writes_trigger=42;source_compaction_factor=2;max_grandparent_overlap_factor=10"
#-------------------------------------------------------------
# MOST IMPORTANT SETTINGS: Optimal 50/50 Snappy
#-------------------------------------------------------------
# write_buffer_size: Sets the size of a single memtable. Once
memtable exceeds this size, it is marked immutable and
# a new one is created.It represents the
amount of data to build up in memory (backed by an unsorted
# log on disk) before converting to a sorted
on-disk file. The default is 64 MB.
# You need to budget for 2 x your worst case
memory use. If you don't have enough memory for this,
# you should reduce this value.
#
# "You can think of memtables as in-memory
write buffers. Each new key-value pair is first written
# to the memtable. Memtable size is
controlled by the option write_buffer_size. It's usually not a
# big memory consumer. However, memtable
size is inversely proportional to write amplification
# -- the more memory you give to the
memtable, the less the write amplification is.
#
# If you increase your memtable size, be
sure to also increase your L1 size! L1 size is controlled by
# the option *"max_bytes_for_level_base"*.
#
# Baseline: 256 MB. Optimized 50/50 Snappy: 512MB
#
# max_bytes_for_level_base: Write amplification.
*"max_bytes_for_level_base"* is total size of level 1. As mentioned,
we recommend
# that this be around the size of level 0.
Each subsequent level is *"max_bytes_for_level_multiplier"*
# larger than previous one. The default is
10 and we do not recommend changing that.
# It could be Set Same Value than "Cache Size".
#
# target_file_size_base: "Default Value is 64MB". Increasing
"*target_file_size_base*" will reduce total number of database files,
# which is generally a good thing. We
recommend setting target_file_size_base to be
# *"max_bytes_for_level_base*" / 10, so that
there are 10 files in level 1".
#
# max_bytes_for_level_multiplier: Default: 10 (Optimal Value).
#
# target_file_size_multiplier: Optimal Value: 1
#
# compression: Default: Snappy (Optimal).
#
#-------------------------------------------------------------
# OTHER SETTINGS:
#-------------------------------------------------------------
# min_write_buffer_number_to_merge: "Minimum number of memtables to be
merged before flushing to storage.
#
# For example:
# * If this option is set to 2,
immutable memtables are only flushed when there are 2 of them
# - a single immutable
memtable will never be flushed.
# * If multiple memtables are merged together, less data may be
written to storage since two updates
# are merged to a single key.
#
# Recommended Value: 4 (Optimal
50/50 Snappy).
# level0_file_num_compaction_trigger: "Number of files to trigger
level-0 compaction. A value <0 means that level-0 compaction will
# not be triggered by number of files at all". Default: 4.
#
# For example, if level0_file_num_compaction_trigger = 8 and
every flushed file is 100MB.
# Then as soon as there is 8
files, they are compacted to one 800MB file. And after we have 8
# new 100MB files, they are
compacted in the second 800MB, and so on. Eventually we'll have a list
# of 800MB files and no more
than 8 100MB files.
#
# Optimal Value: 1.
# max_write_buffer_number: "When the number of memtables waiting to
flush is greater or equal to max_write_buffer_number, writes are
# fully stopped to wait for flush finishes.
#
# The number of in-memory memtables. Each
memtable is of size write_buffer_size.
#
# Default: 2. Recommended Value: Same as
"Total Physical CPU"
# level0_slowdown_writes_trigger: If level0_slowdown_writes_trigger, a
limited write rate to DB is activated.
#
# Recommended Value: Same as
"Total Physical CPU" x3
#
# level0_stop_writes_trigger: If level0_stop_writes_trigger, writes to
DB are stopped.
#
# Recommended Value: Same as
"Total Physical CPU" x3.5
#
# source_compaction_factor: Maximum number of bytes in all source
files to be compacted in a single compaction run.
#
# Default: 1. Optimal 50/50 Snappy: 2
#
# max_grandparent_overlap_factor: Only for level-based
compactions. Default: 10. Optimal 50/50 Snappy: 10
#############################################################################################################################
# Options to Use with Spinning Disks
#############################################################################################################################
# WARNING: Do not use the Options in this Section
("rocksdb_compaction_readahead_size", "rocksdb_use_direct_reads",
# "rocksdb_use_direct_io_for_flush_and_compaction"), as they do not
work with "rocksdb_allow_mmap_reads", resulting
# in Server's Data Corruption.
# Throughput gap between random read vs. sequential read is much
higher in spinning disks. Suggestions:
#---------------------------------------------------------
# Compaction Readahead Size
#---------------------------------------------------------
#If non-zero, we perform bigger reads when doing compaction. If you're
running RocksDB on spinning disks, you should set this to
# at least 2MB (e.g: 16MB). We enforce it to be 2MB if you don't set
it with direct I/O.
rocksdb_compaction_readahead_size=0 # Default: 0
#---------------------------------------------------------
# Direct Reads
#---------------------------------------------------------
# NOTE: * "allow_mmap_reads" cannot be used with "use_direct_reads" or
"use_direct_io_for_flush_and_compaction"
# * "allow_mmap_writes" cannot be used with
"use_direct_io_for_flush_and_compaction", i.e., they cannot be set to
true at
# the same time.
rocksdb_use_direct_reads=0 # Default: 0
rocksdb_use_direct_io_for_flush_and_compaction=0 # Default: 0
#############################################################################################################################
# Data Loading: Bulk Load
#############################################################################################################################
# DESCRIPTION: Commit rows implicitly every rocksdb_bulk_load_size, on
bulk load/insert, update and delete.
# NOTE: Session Variables.
rocksdb_commit_in_the_middle = 1 # Default: 0
# Maximum number of locks a transaction can have:
rocksdb_max_row_locks = 1048576
#############################################################################################################################
# MyRocks Crash Recovery
#############################################################################################################################
# MyRocks supports crash recovery. Crash recovery is done by replaying
transaction logs from WAL (Write Ahead Log) files.
# MyRocks has a system variable rocksdb_wal_recovery_mode to control
how to apply logs, if any of the WAL entries is corrupted.
# This variable can be any of the following options:
#
# 0: If a corrupted WAL entry is detected as the last entry in the
WAL, truncate the entry and start up normally; otherwise,
# refuse to start.
#
# 1 (default): If a corrupted WAL entry is detected, fail to start.
This is the most conservative recovery mode.
#
# 2: If a corrupted WAL entry is detected in the middle of the WAL,
truncate all of WAL entries after that (even though there
# may be uncorrupted entries) and then start up normally. For
Replication Slaves, this option is fine, since the slave
# instance can recover any lost data from the master without
breaking consistency. For Replication Masters, this option
# may end up losing data if you do not run failover. For example,
if the master crashed and was restarted (by mysqld_safe,
# or auto restart after OS reboot) with this mode and it silently
truncated several WAL entries, the master would lose some
# data which may be present on one or more slaves.
#
# 3: If a corrupted WAL entry is detected in the middle of the WAL,
skip the WAL entry and continue to apply as many healthy WAL
# entries as possible. This is the most dangerous recovery option
and it is not generally recommended.
rocksdb_wal_recovery_mode = 1 # Default: 1
#########################################################################
###### myisam (Performance_Schema Variables: Joins not necessary) #######
#########################################################################
# If set, external locking for MyISAM tables is disabled.
# skip_external_locking = 1
# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
# If you don't use MyISAM tables explicitly you can set key_buffer_size
# to a very low value, 64K for example.
# 32 [GB] (Tornado24 Half RAM)· 0,25 = 8[GB]
key_buffer_size = 64K
# This buffer is allocated when MariaDB needs to rebuild the index in
# REPAIR, OPTIMIZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
# myisam_sort_buffer_size = 128M
# The maximum size of the temporary file MariaDB is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
# myisam_max_sort_file_size = 50G
# If a table has more than one index, MyISAM can use more than one
# thread to repair them by sorting in parallel. This makes sense if you
# have multiple CPUs and plenty of memory.
# myisam_repair_threads = 6
# Automatically check and repair not properly closed MyISAM tables.
# myisam_recover_options = FORCE,BACKUP
# When reading rows in sorted order after a sort, the rows are read
# through this buffer to avoid disk seeks. You can improve ORDER BY
# performance a lot, if set this to a high value.
# Allocated per thread, when needed.
# read_rnd_buffer_size = 265K
#########################################################################
################# MyISAM & Aria System Variables ########################
#########################################################################
# Values in [MB] range turn out into a performance decrease
# Size of the buffer used for doing full table scans.
# Allocated per thread, if a full scan is needed.
read_buffer_size = 256K
# MyISAM uses special tree-like cache to make bulk inserts (that is,
# INSERT ... SELECT, INSERT ... VALUES (...), (...), ..., and LOAD DATA
# INFILE) faster. This variable limits the size of the cache tree in
# bytes per thread. Setting it to 0 will disable this optimisation. Do
# not set it larger than "key_buffer_size" for optimal performance.
# This buffer is allocated when a bulk insert is detected.
# Values of 1/4 key_buffer_size make sense (Percona). It is per connection,
# so a 1/16 ratio is choosen in order not to use excesive resources:
# 8[GB] (key_buffer_size) / 16 = 512[MB] (bulk_insert_buffer_size)
# Same value has been choosen as tmp_table_size (For those cases in which
# Temporary Tables exceed 512M and use MyISAM instead of Memory Engine).
# MyISAM uses a special tree-like cache to make bulk
# inserts faster for INSERT ... SELECT, INSERT ...
# VALUES (...), (...), ..., and LOAD DATA INFILE when
# adding data to NON-EMPTY TABLES.
# limits the size of the cache tree in bytes per thread.
bulk_insert_buffer_size=256M
#########################################################################
############# Aria System Variables (Disk Temporary Tables) #############
#########################################################################
# The maximum size of the temporary file MariaDB is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
aria_max_sort_file_size = 100G
# Size of the Key Buffer, used to cache index blocks for Aria tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# Aria tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
aria_pagecache_buffer_size = 4G
# If a table has more than one index, MyISAM can use more than one
# thread to repair them by sorting in parallel. This makes sense if you
# have multiple CPUs and plenty of memory.
aria_repair_threads = 49
# This buffer is allocated when MariaDB needs to rebuild the index in
# REPAIR, OPTIMIZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
aria_sort_buffer_size = 128M
# Automatically check and repair not properly closed MyISAM tables.
# In MariaDB 10.3.0 aria_recover is renamed to aria_recover_options.
aria_recover_options = FORCE,BACKUP
# Path to the directory where to store transactional log:
aria_log_dir_path=C:/Program Files/MariaDB 10.3/data
#########################################################################
########################### mysqldump ###################################
#########################################################################
[mysqldump]
# Do not buffer the whole result set in memory before writing it to
# file. Required for dumping very large tables quick
quick
# The maximum size of one packet or any generated or intermediate string,
# or any parameter sent by the mysql_stmt_send_long_data() C API function.
max_allowed_packet = 16M
#########################################################################
############################# mysql #####################################
#########################################################################
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
# sql_safe_updates = 0
#local_infile = 1
#########################################################################
############################## mysqld_safe ##############################
#########################################################################
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
# |||||||||||||||||||||||| CACHES AND LIMITS |||||||||||||||||||||||||| #
# ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| #
[mysqld_safe]
# Increase the amount of open files allowed per process. Warning: Make
# sure you have set the global system limit high enough! The high value
# is required for a large number of opened tables
# Changes the number of file descriptors available to mysqld.
# You should try increasing the value of this option if mysqld gives you
# the error "Too many open files".
# Default Value: Autosized
# open_files_limit = 65535
# Number of table definitions that can be cached.
table_definition_cache = 4096
#########################################################################
############################## myisamchk ################################
#########################################################################
[myisamchk]
key_buffer_size = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
#########################################################################
############################## mysqlhotcopy #############################
#########################################################################
[mysqlhotcopy]
interactive-timeout
#########################################################################
############################ mysqld #####################################
#########################################################################
[mysqld]
character-set-server = latin1
collation-server = latin1_spanish_ci
#local_infile = 1
[client-server]
#local_infile = 1