- discuss - lists.mariadb.org

[Maria-discuss] New Question: Does MariaDB support multiple data directories within a single instance?
by AskMonty KB 15 Jul '13

15 Jul '13

Hello, A new question has been asked in "Does MariaDB support..." by joshuavalencia: -------------------------------- MySQL 5.6 lets you define separate data directories for individual tables. This is useful if you want to put large tables on a separate storage backend - e.g. frequently used tables go on local disk, and some larger tables go on ISCSI. Does MariaDB support having multiple data directies within a single running instance? -------------------------------- To view or answer this question please visit: http://kb.askmonty.org/en/does-mariadb-support-multiple-data-directories-wi…

1 0

[Maria-discuss] New Question: page_checksum performance implications
by AskMonty KB 11 Jul '13

11 Jul '13

Hello, A new question has been asked in "Aria" by Vasilis: -------------------------------- Does enabling page_checksum for the Aria engine involve significant drops in performance when compared to a disabled page_checksum(ed) table? Are there any benchmarks on this one? At the end, should I enable it or not? -------------------------------- To view or answer this question please visit: http://kb.askmonty.org/en/page_checksum-performance-implications/

1 0

[Maria-discuss] New Question: Creating a System DSN for MariaDB on Windows
by AskMonty KB 09 Jul '13

09 Jul '13

Hello, A new question has been asked in "A MariaDB Primer" by marcw: -------------------------------- Hi, I'd like to use MariaDB to back-end a system that expects an ODBC interface. Is there a way to create a system DSN for MariaDB in Windows 7? It's not showing up as a connection type in the Data Sources panel. -------------------------------- To view or answer this question please visit: http://kb.askmonty.org/en/creating-a-system-dsn-for-mariadb-on-windows/

2 1

[Maria-discuss] New Question: Amazon RDS or AWS services
by AskMonty KB 08 Jul '13

08 Jul '13

Hello, A new question has been asked in "MariaDB community" by openiduser28: -------------------------------- I'm interested in trying out MariaDB, and was wondering if anyone has MariaDB running with Amazon RDS or is it only possible using some sort of VM? I can try it out that way, but being on the free tier sure limits things. Thanks! -------------------------------- To view or answer this question please visit: http://kb.askmonty.org/en/amazon-rds-or-aws-services/

1 0

[Maria-discuss] 5.5 versus 10.0/5.6 performance issues
by Puff, Werner 03 Jul '13

03 Jul '13

Because of performance issues with our DBMS we recently decided to migrate our software to MySQL or one of its forks. We would prefer MariaDB. We created a performance test suite so that we are sure to make the right decision. Beside other values our test measured the average workflow processing time including multiple database transactions. The unexpected outcome was, that we had a big difference in the processing times between 5.5 and 5.6 based databases. average-time [ms] (lower = better) MySQL 5.6 233 Percona 5.6pre 208 MariaDB 10alpha 194 MariaDB 5.5 1248 MySQL 5.5 993 (Firebird 2.5 9694) We are bound to very special hardware, the biggest bottleneck there is USB-stick based storage (cannot be changed for now). Our interpretation of the results and the research we were doing so far is, that the changes within InnoDB/XtraDB storage engine in connection with our "very special" storage solution causes this differences. Can anybody confirm that the changes had a high impact on storage mediums with slow access rates? Or does anybody have an idea if it possible to optimize MariaDB 5.5 (we would like to go with MariaDB) to get the same performance with MySQL 5.6?

3 4

[Maria-discuss] Mysql resource limits.
by Rafał Radecki 02 Jul '13

02 Jul '13

Hi All. I would like to limit resources available to a given user in mysql. I know that there is https://dev.mysql.com/doc/refman/5.5/en/user-resources.html, I also know that cgroups can be used at operating system level. What are your experiences in limiting resources in mysql? I've used percona statistics and had information provided by it. Are there any better solutions? Best regards, Rafal Radecki.

1 0

[Maria-discuss] New Question: Local state seqno out of sync with group
by AskMonty KB 02 Jul '13

02 Jul '13

Hello, A new question has been asked in "Galera" by uxbod: -------------------------------- We have MariaDB and Galera working in our lab on a three node cluster. When setting them up the wsrep options for each node were as follows: {{{ node1: wsrep_cluster_address="gcomm://" node2: wsrep_cluster_address="gcomm://172.30.1.3" node3: wsrep_cluster_address="gcomm://172.30.1.1" }}} Once all the nodes were in sync I shutdown node1 and set its wsrep_cluster_address to be 172.30.1.2. This I thought would allow the three nodes to keep in sync. What happened though was when I started MariaDB backup I received the error: {{{ 130702 8:35:51 [ERROR] WSREP: Local state seqno (16053) is greater than group seqno (15898): states diverged. Aborting to avoid potential data loss. Remove '/var/lib/mysql//grastate.dat' file and restart if you wish to continue. (FATAL) at galera/src/replicator_str.cpp:state_transfer_required():34 }}} Why has this happened ? Is it safe to proceed with the recommendation of removing grastate.dat ? -------------------------------- To view or answer this question please visit: http://kb.askmonty.org/en/local-state-seqno-out-of-sync-with-group/

1 0

[Maria-discuss] New Question: xtrabackup sync method
by AskMonty KB 30 Jun '13

30 Jun '13

Hello, A new question has been asked in "Galera" by uxbod: -------------------------------- Hello, have installed Maria on Centos 6.4 x86_64: MariaDB-common-5.5.31-1.x86_64 MariaDB-Galera-server-5.5.29-1.x86_64 MariaDB-compat-5.5.31-1.x86_64 MariaDB-client-5.5.31-1.x86_64 and the primary node is working fine with the configuration: [mysqld] wsrep_provider=/usr/lib64/galera/libgalera_smm.so wsrep_cluster_name="MYCLUSTER" wsrep_node_name=db1 wsrep_cluster_address="gcomm://" wsrep_slave_threads=8 wsrep_sst_method=xtrabackup wsrep_sst_auth=username:password wsrep_node_address=172.30.10.13 datadir=/var/lib/mysql innodb_autoinc_lock_mode=2 The problem is on the second node when it tries to replicate as receiving the error: 130629 8:55:17 [ERROR] WSREP: Failed to read 'ready <addr>' from: wsrep_sst_xtrabackup --role 'joiner' --address '172.30.10.18' --auth 'username:password' --datadir '/var/lib/mysql/' --defaults-file '/etc/my.cnf' --parent '7131' Read: 'Can't find innobackupex in the path' yet innobackupex is indeed within the path. What could the issue be please ? -------------------------------- To view or answer this question please visit: http://kb.askmonty.org/en/xtrabackup-sync-method/

1 0

[Maria-discuss] New Question: How can I install MariaDB C Client on Fedora 17/18 or CentOS 6.* without uninstalling MySQL
by AskMonty KB 29 Jun '13

29 Jun '13

Hello, A new question has been asked in "MariaDB Client Library for C" by aesterkin: -------------------------------- Hello, I need to install only client libraries without uninstalling MySQL. How can I do it? I tries installing from your YUM repository, but this installation conflicts with mysql-libs and mysql-server pachages (from "remi" repository). Thanks, Alex Esterkin -------------------------------- To view or answer this question please visit: http://kb.askmonty.org/en/how-can-i-install-mariadb-c-client-on-fedora-1718…

1 0

[Maria-discuss] New Question: Is it possible to specify a user, password, and non standard port for the thrift servers?
by AskMonty KB 28 Jun '13

28 Jun '13

Hello, A new question has been asked in "Cassandra Storage Engine" by frankflynn: -------------------------------- In the Cassandra examples we see: set cassandra_default_thrift_host='192.168.0.10' and then create table cassandra_tbl ( rowkey type PRIMARY KEY, ... thrift_host= can also be specified here But is it currently possible to specify a user, password, and/or a non standard port? I've removed the user and password and tried thrift_host='192.168.0.10:9161' (using my particular IP) but that does not seem to work. The error I get is: ERROR 1429 (HY000): Unable to connect to foreign data source: Could not resolve host for client socket. [1] I can connect to this host / port from the command line. -------------------------------- To view or answer this question please visit: http://kb.askmonty.org/en/is-it-possible-to-specify-a-user-password-and-non…

1 0