Hi Karl, someone else just saw that as well. it was indeed a type in the email. To answer your questions; the plugins are the same sql_error_log and socket_plugin (which is no longer needed in 10.4 and was removed after the upgrade). Also since i can restore a new node from a staging backup, in either VPC.
Databases are a good question, no i have not. Perhaps i should try a complete set of combinations, which may be a better use of time than brining the cluster up to 5 and then seeing if i can take a physical backup of one of the new nodes.
On Sat, Apr 18, 2020 at 1:11 PM Karl Erik Levik karl.levik@gmail.com wrote:
Well, what I mean is, you're missing the "q" in "mysql", so I was thinking perhaps that command doesn't actually do what you think it does?
If that's not the issue, then I guess you have to look again at your prod nodes and figure out what, if anything, is special/unusual about them. Do you have any special plugins enabled? Any special storage engines used that you don't have on staging? (Wouldn't think so since only InnoDB is properly supported by Galera ...) Do you have any crud in your datadir that might create problems for mariabackup?
Have you tried doing a partial backup/restore instead, i.e. only some of the databases?
Cheers, Karl
On Sat, 18 Apr 2020 at 17:25, Jeff Dyke jeff.dyke@gmail.com wrote:
Thanks Karl, that is just there so everything under mysql is deleted and not the directory itself as mariabackup needs the datadir clean. And i'm using the same "script" on both VPCs.
Appreciate the read!
On Sat, Apr 18, 2020 at 6:01 AM Karl Erik Levik karl.levik@gmail.com wrote:
Hi Jeff,
Probably not helpful, but I dunno if this is a typo just in your email or also in the script?
sudo rm -rf /var/lib/mysl/*
Cheers, Karl
On Thu, 16 Apr 2020 at 00:47, Jeff Dyke jeff.dyke@gmail.com wrote:
This has biting me for a bit, and i have tried a litany of things. Here is the issue: VPC 1: (prod) Mariadb 10.4.12 - galera in a 3 node cluster, cluster functioning perfectly
VPC 2: (staging) Mariadb 10.4.12 galera in a 3 node cluster also running smoothly.
-- backup script (clipped for only the essentials) -- set -e DIR="/home/jeff/restore" rm -rf $DIR mkdir $DIR AUTH='--defaults-extra-file=/root/db.cnf -u root' sudo mysql ${AUTH} -e "SET GLOBAL wsrep_desync = ON;" sudo mysql ${AUTH} -e "SET GLOBAL wsrep_on = OFF"; sudo mariabackup ${AUTH} --backup --binlog-info=ON --target-dir="${DIR}" 2>&1 | grep -vE "Copying|done|log scanned" sudo mysql ${AUTH} -e "SET GLOBAL wsrep_on = ON;" sudo mysql ${AUTH} -e "SET GLOBAL wsrep_desync = OFF";
-- end script --
-- restore process -- sudo service mariadb stop (or kill -9 PID only when the server won't start) sudo rm -rf /var/lib/mysl/* sudo mariabackup --prepare --target-dir=restore sudo mariabackup --copy-back --target-dir=restore sudo chown -R mysql:mysql /var/lib/mysql/* sudo service mariadb start -- end restore --
I can run this on any of the script and backup process on any of the *staging* nodes and restore them to a freshly built server within that VPC. I can also take the backup from *staging* and load in into a newly build machine on the *prod* VPC.
What i can not do is run the script on any of the prod members and restore it to a newly built server, regardless of location. (really the locations don't matter at all)
The following is the log from a failing restore from a proddb backup and restore: 2020-04-15 22:11:10 0 [Note] InnoDB: Using Linux native AIO 2020-04-15 22:11:10 0 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2020-04-15 22:11:10 0 [Note] InnoDB: Uses event mutexes 2020-04-15 22:11:10 0 [Note] InnoDB: Compressed tables use zlib 1.2.11 2020-04-15 22:11:10 0 [Note] InnoDB: Number of pools: 1 2020-04-15 22:11:10 0 [Note] InnoDB: Using SSE2 crc32 instructions 2020-04-15 22:11:10 0 [Note] mysqld: O_TMPFILE is not supported on /tmp (disabling future attempts) 2020-04-15 22:11:10 0 [Note] InnoDB: Initializing buffer pool, total size = 2G, instances = 8, chunk size = 128M 2020-04-15 22:11:10 0 [Note] InnoDB: Completed initialization of buffer pool 2020-04-15 22:11:10 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority(). 2020-04-15 22:11:10 0 [Note] InnoDB: Setting log file ./ib_logfile101 size to 50331648 bytes 2020-04-15 22:11:10 0 [Note] InnoDB: Setting log file ./ib_logfile1 size to 50331648 bytes 2020-04-15 22:11:10 0 [Note] InnoDB: Renaming log file ./ib_logfile101 to ./ib_logfile0 2020-04-15 22:11:10 0 [Note] InnoDB: New log files created, LSN=42006460184 2020-04-15 22:11:10 0 [Note] InnoDB: 128 out of 128 rollback segments are active. 2020-04-15 22:11:10 0 [Note] InnoDB: Creating shared tablespace for temporary tables 2020-04-15 22:11:10 0 [Note] InnoDB: Setting file './ibtmp1' size to 12 MB. Physically writing the file full; Please wait ... 2020-04-15 22:11:10 0 [Note] InnoDB: File './ibtmp1' size is now 12 MB. 2020-04-15 22:11:10 0 [Note] InnoDB: Waiting for purge to start 2020-04-15 22:11:10 0 [Note] InnoDB: 10.4.12 started; log sequence number 42006460428; transaction id 23858673 2020-04-15 22:11:10 0 [Note] InnoDB: Loading buffer pool(s) from /var/lib/mysql/ib_buffer_pool 2020-04-15 22:11:10 0 [Note] Plugin 'FEEDBACK' is disabled. 2020-04-15 22:11:11 0 [Note] InnoDB: Buffer pool(s) load completed at 200415 22:11:11 -- hangs here for about an hour before timing out --
Logfile from a successful start
2020-04-15 23:13:15 0 [Note] InnoDB: Using Linux native AIO 2020-04-15 23:13:15 0 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins 2020-04-15 23:13:15 0 [Note] InnoDB: Uses event mutexes 2020-04-15 23:13:15 0 [Note] InnoDB: Compressed tables use zlib 1.2.11 2020-04-15 23:13:15 0 [Note] InnoDB: Number of pools: 1 2020-04-15 23:13:15 0 [Note] InnoDB: Using SSE2 crc32 instructions 2020-04-15 23:13:15 0 [Note] mysqld: O_TMPFILE is not supported on /tmp (disabling future attempts) 2020-04-15 23:13:15 0 [Note] InnoDB: Initializing buffer pool, total size = 2G, instances = 8, chunk size = 128M 2020-04-15 23:13:16 0 [Note] InnoDB: Completed initialization of buffer pool 2020-04-15 23:13:16 0 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriority(). 2020-04-15 23:13:16 0 [Note] InnoDB: Setting log file ./ib_logfile101 size to 50331648 bytes 2020-04-15 23:13:16 0 [Note] InnoDB: Setting log file ./ib_logfile1 size to 50331648 bytes 2020-04-15 23:13:16 0 [Note] InnoDB: Renaming log file ./ib_logfile101 to ./ib_logfile0 2020-04-15 23:13:16 0 [Note] InnoDB: New log files created, LSN=43323668550 2020-04-15 23:13:16 0 [Note] InnoDB: 128 out of 128 rollback segments are active. 2020-04-15 23:13:16 0 [Note] InnoDB: Creating shared tablespace for temporary tables 2020-04-15 23:13:16 0 [Note] InnoDB: Setting file './ibtmp1' size to 12 MB. Physically writing the file full; Please wait ... 2020-04-15 23:13:16 0 [Note] InnoDB: File './ibtmp1' size is now 12 MB. 2020-04-15 23:13:16 0 [Note] InnoDB: Waiting for purge to start 2020-04-15 23:13:16 0 [Note] InnoDB: 10.4.12 started; log sequence number 43323669004; transaction id 22422468 2020-04-15 23:13:16 0 [Note] InnoDB: Loading buffer pool(s) from /var/lib/mysql/ib_buffer_pool 2020-04-15 23:13:16 0 [Note] Plugin 'FEEDBACK' is disabled. 2020-04-15 23:13:16 0 [Note] Server socket created on IP: '0.0.0.0'. 2020-04-15 23:13:16 0 [Note] Reading of all Master_info entries succeeded 2020-04-15 23:13:16 0 [Note] Added new Master_info '' to hash table 2020-04-15 23:13:16 0 [Note] /usr/sbin/mysqld: ready for connections. Version: '10.4.12-MariaDB-1:10.4.12+maria~bionic' socket: '/var/run/mysqld/mysqld.sock' port: 3306 mariadb.org binary distribution 2020-04-15 23:13:22 0 [Note] InnoDB: Buffer pool(s) load completed at 200415 23:13:22
------------------------ The main difference between the two is that: - the server socket is logged - master_info is logged - and it binds to the port/socket
Before they *both* end with 2020-04-15 23:13:22 0 [Note] InnoDB: Buffer pool(s) load completed at 200415 23:13:22
-- Other Notes -- - Config files are the same except for ips, both on newly built servers as the cluster as they are managed through salt. I ran a diff -r against prod vs staging and only saw
There has to be some corruption in the mariabackup output, but still reported OK. Since i can put a staging backup on a prod server, but i can not put a prod backup on a staging server.
If you've gotten this far, thank you. If you have any ideas on what i could try, i'd be grateful. aria_chk and all other table checks return correctly. I'm not sure what makes a server write out the master_info, so possibly that is a pointer.
I'm happy to answer any questions, i've tried way to many things to post here as i didn't want to write until i had enough of dumb stuff figured out. I could rebuild the prod cluster but am really looking to understand this. I don't really want to build my own with debug info on b/c why would they be different between the two vpcs.
_______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss@lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp
_______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss@lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp
_______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss@lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp
_______________________________________________ Mailing list: https://launchpad.net/~maria-discuss Post to : maria-discuss@lists.launchpad.net Unsubscribe : https://launchpad.net/~maria-discuss More help : https://help.launchpad.net/ListHelp