- developers - lists.mariadb.org

[Maria-developers] Page encryption exception handling.
by Clemens Dörrhöfer 13 Oct '14

13 Oct '14

Hi community, I am working on implementing page encryption for XtraDB. Encryption itself works fine, now I am focusing on exception handling. My problem is that whenever page encryption is misconfigured it will crash the entire server, which is no acceptable behaviour. Example I encrypted a table with key id 42, I delete the key from the keypool thus I can no longer decrypt the table, because the appropriate key is missing. Ideally whenever a client tries to query data from an encrypted table, which cannot be decrypted, it will receive an error message informing the client that Table X could not be decrypted because key 42 is missing. Can you point me out to how to accomplish such a behaviour. Greetings Clemens Dörrhöfer

2 1

Re: [Maria-developers] [Commits] [svoj@mariadb.org: Rev 4437: Fixed mroonga build failure on Power8: define generic gcc version of in lp:maria/10.0]
by Kouhei Sutou 09 Oct '14

09 Oct '14

Hi Sergey, Thanks for the fix! I've merged your change into Groonga: https://github.com/groonga/groonga/commit/b3d38c5b9863cb7a9e93b9461c8b93fbf… Thanks, -- kou In <20141009083146.GA3231@june> "[Commits] [svoj(a)mariadb.org: Rev 4437: Fixed mroonga build failure on Power8: define generic gcc version of in lp:maria/10.0]" on Thu, 9 Oct 2014 12:31:47 +0400, Sergey Vojtovich <svoj(a)mariadb.org> wrote: > Hi Kentoku, > > FYI: I just pushed this fix to 10.0. There're also some test failures on Power8 > in mroonga/storage suite, mroonga/wrapper was 100% successful. > > Regards, > Sergey > > ----- Forwarded message from Sergey Vojtovich <svoj(a)mariadb.org> ----- > > Date: Thu, 9 Oct 2014 08:25:58 +0000 (UTC) > From: Sergey Vojtovich <svoj(a)mariadb.org> > To: commits(a)mariadb.org > Subject: [Commits] Rev 4437: Fixed mroonga build failure on Power8: define generic gcc version of in lp:maria/10.0 > > At lp:maria/10.0 > > ------------------------------------------------------------ > revno: 4437 > revision-id: svoj(a)mariadb.org-20141009082545-nt183b7y1gjihfjp > parent: psergey(a)askmonty.org-20141006112922-45pcytb993xcwh89 > committer: Sergey Vojtovich <svoj(a)mariadb.org> > branch nick: 10.0-mroonga > timestamp: Thu 2014-10-09 12:25:45 +0400 > message: > Fixed mroonga build failure on Power8: define generic gcc version of > GRN_SET_64BIT. > === modified file 'storage/mroonga/vendor/groonga/lib/groonga_in.h' > --- a/storage/mroonga/vendor/groonga/lib/groonga_in.h 2014-09-20 15:33:45 +0000 > +++ b/storage/mroonga/vendor/groonga/lib/groonga_in.h 2014-10-09 08:25:45 +0000 > @@ -505,6 +505,9 @@ typedef int grn_cond; > /* todo */ > # define GRN_SET_64BIT(p,v) \ > (void)atomic_swap_64(p, v) > +# elif defined(__ATOMIC_SEQ_CST) /* GCC atomic builtins */ > +# define GRN_SET_64BIT(p,v) \ > + __atomic_store_n(p, v, __ATOMIC_SEQ_CST) > # endif /* ATOMIC 64BIT SET */ > > # ifdef HAVE_MKOSTEMP > > _______________________________________________ > commits mailing list > commits(a)mariadb.org > https://lists.askmonty.org/cgi-bin/mailman/listinfo/commits > > ----- End forwarded message ----- > _______________________________________________ > commits mailing list > commits(a)mariadb.org > https://lists.askmonty.org/cgi-bin/mailman/listinfo/commits

2 2

[Maria-developers] INET6, data type plugins
by Alexander Barkov 09 Oct '14

09 Oct '14

Hello all, I have mostly implemented the server side part of the fixed length 16-byte INET6 data type (only some clean-ups left). MDEV-274 The data type for IPv6/IPv4 addresses in MariaDB https://mariadb.atlassian.net/browse/MDEV-274 I made it in a very new style, which is ready to data type plugins, as described in: MDEV-4912 Add a plugin to field types (column types) https://mariadb.atlassian.net/browse/MDEV-4912 It is done by introducing a new abstract super-class Type_handler with a number of virtual public methods (around 50 public methods at this point). To implement a new data type one just needs to implement an instantiable class derived from Type_handler and register the new data type in a special global registry. Everything start to work automatically, including (but not limited to): - correct comparison - hybrid type functions like COALESCE, LEAST - aggregate functions MAX() and MIN() - CAST to the new type - ORDER BY, both for field and for items - conversion to the standard data types - indexing and index search The definition of the instantiable class that actually implements INET6 looks like this: class Type_handler_inet6: public Type_handler { private: class Field_inet6: public Field { ... }; class Arg_comparator_inet6: public Arg_comparator { ... }; class Item_typecast_inet6: public Item_func { ... }; public: // various access methods }; It looks very nice for me so far :) I have some questions about the remaining things: 1. In my current patch the new data type INET6 is not loaded dynamically from a shared library. It's implemented inside mysqld. Is it Okey? Or would we prefer to make it as a plugin from the beginning? (in this case there's some more work left: the dynamic loader code, client-server protocol, PS protocol). 2. In case of pluggable data types we'll need some changes in the client-server protocol, to transfer data type names (and probably some more metadata) to the client side in some textual form. Any ideas on that? 3. PS protocol obviously needs two ways to bind data: in text format and in binary format. For example, in case of INET6 it would be nice to be able to bind parameters and fetch values using: - text representation "ffff::ffff" - and binary representation 0xFFFF000000000000000000000000FFFF. I can see some ways to do this: a. Every pluggable data type uses its own type code in MYSQL_BIND: char ip6[16]= "\xff\xff...\xff"; MYSQL_BIND bind; bind.buffer_type= 128; // This is INET6 bind.buffer= ip6; bind.length= sizeof(ip6); but the code (128) may vary between servers, depending on how the plugin is installed. b. Or we could introduce a singe new type code MYSQL_TYPE_RAW: char ip6[16]= "\xff\xff...\xff"; MYSQL_BIND bind; bind.buffer_type= MYSQL_TYPE_RAW; bind.buffer= ip6; bind.length= sizeof(ip6); The server should be able to treat a single type code with different data types without any problems, because it knows the parameter context. But this will not allow to mix values of different types though, for example insert an INET4 value into an INET6 column (or vice verse) won't be possible. c. Or we could support both "native" type codes and MYSQL_TYPE_RAW. 4. Do we need the INET4 data type (fixed length, 4 bytes)? 5. Do we need a PostgreSQL-alike INET data type which is able to store both INET4 and INET6 values (I guess this one should be variable length: 4-bytes for INET4 and 16 bytes for INET6 values. Any feedback would be appreciated. The current patch (attached) will be polished. but the general idea should already be clear from the current version. Thanks.

3 4

Re: [Maria-developers] [Commits] Rev 4391: MDEV-6676: Speculative parallel replication. in http://bazaar.launchpad.net/~maria-captains/maria/10.0
by Jonas Oreland 08 Oct '14

08 Oct '14

how about also adding a mode = 'auto' which currently can be == transaction, but in future could be extended to based on statistics flip actual modes back and forth ? /Jonas On Tue, Oct 7, 2014 at 4:20 PM, <knielsen(a)knielsen-hq.org> wrote: > At http://bazaar.launchpad.net/~maria-captains/maria/10.0 > > ------------------------------------------------------------ > revno: 4391 > revision-id: knielsen(a)knielsen-hq.org-20141007142037-y85xq099ltdiqno6 > parent: knielsen(a)knielsen-hq.org-20141003094323-nosx0y7vv0kjv20e > committer: Kristian Nielsen <knielsen(a)knielsen-hq.org> > branch nick: work-10.0-mdev6676 > timestamp: Tue 2014-10-07 16:20:37 +0200 > message: > MDEV-6676: Speculative parallel replication. > > Better syntax for configuring the parallel mode. Now it is a CHANGE > MASTER > option instead of a system variable, which makes it possible to configure > differently for different multi-source replication masters. > > Now also the domain-based replication mode can be disabled. > === modified file 'mysql-test/include/check-testcase.test' > --- a/mysql-test/include/check-testcase.test 2013-12-16 12:02:21 +0000 > +++ b/mysql-test/include/check-testcase.test 2014-10-07 14:20:37 +0000 > @@ -64,6 +64,7 @@ if ($tmp) > --echo Master_SSL_Crlpath # > --echo Using_Gtid No > --echo Gtid_IO_Pos # > + --echo Parallel_Mode domain,groupcommit > } > if (!$tmp) { > # Note: after WL#5177, fields 13-18 shall not be filtered-out. > > === modified file 'mysql-test/r/mysqld--help.result' > --- a/mysql-test/r/mysqld--help.result 2014-09-19 13:25:37 +0000 > +++ b/mysql-test/r/mysqld--help.result 2014-10-07 14:20:37 +0000 > @@ -915,17 +915,6 @@ > parallel replication thread when reading ahead in the > relay log looking for opportunities for parallel > replication. Only used when --slave-parallel-threads > 0. > - --slave-parallel-mode=name > - Controls what transactions are applied in parallel when > - using --slave-parallel-threads. Syntax: > - slave_paralle_mode=value[,value...], where "value" could > - be one or more of: "domain", to apply different > - replication domains in parallel; "groupcommit", to apply > - in parallel transactions that group-committed together on > - the master; "transactional", to optimistically try to > - apply all transactional DML in parallel; and "waiting" to > - extend "transactional" to even transactions that had to > - wait on the master. > --slave-parallel-threads=# > If non-zero, number of threads to spawn to apply in > parallel events on the slave that were group-committed on > @@ -1320,7 +1309,6 @@ slave-exec-mode STRICT > slave-max-allowed-packet 1073741824 > slave-net-timeout 3600 > slave-parallel-max-queued 131072 > -slave-parallel-mode domain,groupcommit > slave-parallel-threads 0 > slave-skip-errors (No default value) > slave-sql-verify-checksum TRUE > > === modified file 'mysql-test/suite/rpl/r/rpl_parallel.result' > --- a/mysql-test/suite/rpl/r/rpl_parallel.result 2014-08-15 > 09:31:13 +0000 > +++ b/mysql-test/suite/rpl/r/rpl_parallel.result 2014-10-07 > 14:20:37 +0000 > @@ -1,5 +1,5 @@ > -include/rpl_init.inc [topology=1->2] > -SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads; > +include/master-slave.inc > +[connection master] > SET GLOBAL slave_parallel_threads=10; > ERROR HY000: This operation cannot be performed as you have a running > slave ''; run STOP SLAVE '' first > include/stop_slave.inc > @@ -923,8 +923,79 @@ SELECT * FROM t2 WHERE a >= 30 ORDER BY > 32 > 33 > 34 > +*** MDEV-6676 - test syntax of CHANGE MASTER TO PARALLEL_MODE=xxx *** > +Parallel_Mode = 'domain,groupcommit' > include/stop_slave.inc > -SET GLOBAL slave_parallel_threads=@old_parallel_threads; > +CHANGE MASTER TO parallel_mode=(,domain,groupcommit); > +ERROR 42000: You have an error in your SQL syntax; check the manual that > corresponds to your MariaDB server version for the right syntax to use near > 'domain,groupcommit)' at line 1 > +CHANGE MASTER TO parallel_mode=(domain,groupcommit,transactional); > +ERROR HY000: Invalid use of 'transactional' option for PARALLEL_MODE in > CHANGE MASTER TO > +CHANGE MASTER TO parallel_mode=(waiting,domain,transactional,waiting); > +ERROR HY000: Invalid use of 'waiting' option for PARALLEL_MODE in CHANGE > MASTER TO > +CHANGE MASTER TO parallel_mode=(domain,domain); > +ERROR HY000: Invalid use of 'domain' option for PARALLEL_MODE in CHANGE > MASTER TO > +CHANGE MASTER TO parallel_mode=(waiting,transactional,domain); > +Parallel_Mode = 'domain,transactional,waiting' > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > +Parallel_Mode = 'domain,groupcommit' > +*** MDEV-6676 - test that empty parallel_mode does not replicate in > parallel *** > +INSERT INTO t2 VALUES (40); > +include/save_master_gtid.inc > +CHANGE MASTER TO parallel_mode=(); > +SET @old_dbug= @@GLOBAL.debug_dbug; > +SET GLOBAL debug_dbug="+d,slave_crash_if_parallel_apply"; > +include/start_slave.inc > +include/sync_with_master_gtid.inc > +SELECT * FROM t2 WHERE a >= 40 ORDER BY a; > +a > +40 > +include/stop_slave.inc > +SET GLOBAL debug_dbug=@old_dbug; > +*** MDEV-6676 - test disabling domain-based parallel replication *** > +SET gtid_domain_id = 1; > +INSERT INTO t2 VALUES (41); > +INSERT INTO t2 VALUES (42); > +INSERT INTO t2 VALUES (43); > +INSERT INTO t2 VALUES (44); > +INSERT INTO t2 VALUES (45); > +INSERT INTO t2 VALUES (46); > +DELETE FROM t2 WHERE a >= 41; > +SET gtid_domain_id = 2; > +INSERT INTO t2 VALUES (41); > +INSERT INTO t2 VALUES (42); > +INSERT INTO t2 VALUES (43); > +INSERT INTO t2 VALUES (44); > +INSERT INTO t2 VALUES (45); > +INSERT INTO t2 VALUES (46); > +SET gtid_domain_id = 0; > +include/save_master_gtid.inc > +CHANGE MASTER TO parallel_mode=(groupcommit); > +include/start_slave.inc > +include/sync_with_master_gtid.inc > +SELECT * FROM t2 WHERE a >= 40 ORDER BY a; > +a > +40 > +41 > +42 > +43 > +44 > +45 > +46 > +include/stop_slave.inc > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > +include/start_slave.inc > +*** MDEV-6676 - test that parallel mode is saved correctly in master.info > across server restart *** > +Parallel_Mode = 'domain,groupcommit' > +include/stop_slave.inc > +CHANGE MASTER TO parallel_mode=(transactional,waiting); > +Parallel_Mode = 'transactional,waiting' > +include/start_slave.inc > +include/rpl_restart_server.inc [server_number=2] > +Parallel_Mode = 'transactional,waiting' > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > +include/start_slave.inc > +include/stop_slave.inc > +SET GLOBAL slave_parallel_threads=0; > include/start_slave.inc > SET DEBUG_SYNC= 'RESET'; > DROP function foo; > > === modified file 'mysql-test/suite/rpl/r/rpl_parallel_optimistic.result' > --- a/mysql-test/suite/rpl/r/rpl_parallel_optimistic.result 2014-09-24 > 19:25:10 +0000 > +++ b/mysql-test/suite/rpl/r/rpl_parallel_optimistic.result 2014-10-07 > 14:20:37 +0000 > @@ -2,11 +2,9 @@ include/rpl_init.inc [topology=1->2] > ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB; > CREATE TABLE t1 (a int PRIMARY KEY, b INT) ENGINE=InnoDB; > SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads; > -SET @old_mode=@@GLOBAL.slave_parallel_mode; > include/stop_slave.inc > SET GLOBAL slave_parallel_threads=10; > -SET GLOBAL slave_parallel_mode="domain,transactional"; > -CHANGE MASTER TO master_use_gtid=slave_pos; > +CHANGE MASTER TO master_use_gtid=slave_pos, > parallel_mode=(domain,transactional); > INSERT INTO t1 VALUES(1,1); > BEGIN; > INSERT INTO t1 VALUES(2,1); > @@ -288,8 +286,8 @@ SET GLOBAL binlog_format= @old_format; > SET GLOBAL tx_isolation= @old_isolation; > include/start_slave.inc > include/stop_slave.inc > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > SET GLOBAL slave_parallel_threads=@old_parallel_threads; > -SET GLOBAL slave_parallel_mode=@old_mode; > include/start_slave.inc > DROP TABLE t1, t2, t3; > include/rpl_end.inc > > === modified file > 'mysql-test/suite/rpl/r/rpl_parallel_optimistic_nobinlog.result' > --- a/mysql-test/suite/rpl/r/rpl_parallel_optimistic_nobinlog.result > 2014-09-24 19:25:10 +0000 > +++ b/mysql-test/suite/rpl/r/rpl_parallel_optimistic_nobinlog.result > 2014-10-07 14:20:37 +0000 > @@ -6,12 +6,10 @@ INSERT INTO t1 VALUES (1,0), (2,0), (3,0 > INSERT INTO t2 VALUES (1,0), (2,0); > SET @old_isolation= @@GLOBAL.tx_isolation; > SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads; > -SET @old_mode=@@GLOBAL.slave_parallel_mode; > include/stop_slave.inc > SET GLOBAL TRANSACTION ISOLATION LEVEL READ COMMITTED; > SET GLOBAL slave_parallel_threads=10; > -SET GLOBAL slave_parallel_mode="domain,transactional,waiting"; > -CHANGE MASTER TO master_use_gtid=slave_pos; > +CHANGE MASTER TO master_use_gtid=slave_pos, > parallel_mode=(domain,transactional,waiting); > *** Test that we replicate correctly when using READ COMMITTED and > --log-slave-updates=0 on the slave *** > INSERT INTO t1 SELECT 4, COUNT(*) FROM t2; > INSERT INTO t2 SELECT 4, COUNT(*) FROM t1; > @@ -78,8 +76,8 @@ a b > 10 10 > include/stop_slave.inc > SET GLOBAL tx_isolation= @old_isolation; > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > SET GLOBAL slave_parallel_threads=@old_parallel_threads; > -SET GLOBAL slave_parallel_mode=@old_mode; > include/start_slave.inc > DROP TABLE t1, t2; > include/rpl_end.inc > > === modified file 'mysql-test/suite/rpl/t/rpl_parallel.test' > --- a/mysql-test/suite/rpl/t/rpl_parallel.test 2014-08-15 09:31:13 +0000 > +++ b/mysql-test/suite/rpl/t/rpl_parallel.test 2014-10-07 14:20:37 +0000 > @@ -1,13 +1,12 @@ > --source include/have_innodb.inc > --source include/have_debug.inc > --source include/have_debug_sync.inc > ---let $rpl_topology=1->2 > ---source include/rpl_init.inc > +--source include/master-slave.inc > > # Test various aspects of parallel replication. > > --connection server_2 > -SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads; > +--let $old_parallel_threads=`SELECT @@GLOBAL.slave_parallel_threads` > --error ER_SLAVE_MUST_STOP > SET GLOBAL slave_parallel_threads=10; > --source include/stop_slave.inc > @@ -1466,9 +1465,100 @@ SET sql_slave_skip_counter= 1; > SELECT * FROM t2 WHERE a >= 30 ORDER BY a; > > > +--echo *** MDEV-6676 - test syntax of CHANGE MASTER TO PARALLEL_MODE=xxx > *** > +--connection server_2 > + > +--let $status_items= Parallel_Mode > +--source include/show_slave_status.inc > +--source include/stop_slave.inc > +--error ER_PARSE_ERROR > +CHANGE MASTER TO parallel_mode=(,domain,groupcommit); > +--error ER_INVALID_SLAVE_PARALLEL_MODE > +CHANGE MASTER TO parallel_mode=(domain,groupcommit,transactional); > +--error ER_INVALID_SLAVE_PARALLEL_MODE > +CHANGE MASTER TO parallel_mode=(waiting,domain,transactional,waiting); > +--error ER_INVALID_SLAVE_PARALLEL_MODE > +CHANGE MASTER TO parallel_mode=(domain,domain); > +CHANGE MASTER TO parallel_mode=(waiting,transactional,domain); > +--let $status_items= Parallel_Mode > +--source include/show_slave_status.inc > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > +--let $status_items= Parallel_Mode > +--source include/show_slave_status.inc > + > + > +--echo *** MDEV-6676 - test that empty parallel_mode does not replicate > in parallel *** > +--connection server_1 > +INSERT INTO t2 VALUES (40); > +--source include/save_master_gtid.inc > + > +--connection server_2 > +CHANGE MASTER TO parallel_mode=(); > +# Test that we do not use parallel apply, by injecting an unconditional > +# crash in the parallel apply code. > +SET @old_dbug= @@GLOBAL.debug_dbug; > +SET GLOBAL debug_dbug="+d,slave_crash_if_parallel_apply"; > +--source include/start_slave.inc > +--source include/sync_with_master_gtid.inc > +SELECT * FROM t2 WHERE a >= 40 ORDER BY a; > +--source include/stop_slave.inc > +SET GLOBAL debug_dbug=@old_dbug; > + > + > +--echo *** MDEV-6676 - test disabling domain-based parallel replication > *** > +--connection server_1 > +# Let's do a bunch of transactions that will conflict if run out-of-order > in > +# domain-based parallel replication mode. > +SET gtid_domain_id = 1; > +INSERT INTO t2 VALUES (41); > +INSERT INTO t2 VALUES (42); > +INSERT INTO t2 VALUES (43); > +INSERT INTO t2 VALUES (44); > +INSERT INTO t2 VALUES (45); > +INSERT INTO t2 VALUES (46); > +DELETE FROM t2 WHERE a >= 41; > +SET gtid_domain_id = 2; > +INSERT INTO t2 VALUES (41); > +INSERT INTO t2 VALUES (42); > +INSERT INTO t2 VALUES (43); > +INSERT INTO t2 VALUES (44); > +INSERT INTO t2 VALUES (45); > +INSERT INTO t2 VALUES (46); > +SET gtid_domain_id = 0; > +--source include/save_master_gtid.inc > +--connection server_2 > +CHANGE MASTER TO parallel_mode=(groupcommit); > +--source include/start_slave.inc > +--source include/sync_with_master_gtid.inc > +SELECT * FROM t2 WHERE a >= 40 ORDER BY a; > +--source include/stop_slave.inc > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > +--source include/start_slave.inc > + > + > +--echo *** MDEV-6676 - test that parallel mode is saved correctly in > master.info across server restart *** > +--connection server_2 > +--let $status_items= Parallel_Mode > +--source include/show_slave_status.inc > +--source include/stop_slave.inc > +CHANGE MASTER TO parallel_mode=(transactional,waiting); > +--let $status_items= Parallel_Mode > +--source include/show_slave_status.inc > +--source include/start_slave.inc > + > +--let $rpl_server_number= 2 > +--source include/rpl_restart_server.inc > + > +--connection server_2 > +--let $status_items= Parallel_Mode > +--source include/show_slave_status.inc > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > +--source include/start_slave.inc > + > + > --connection server_2 > --source include/stop_slave.inc > -SET GLOBAL slave_parallel_threads=@old_parallel_threads; > +eval SET GLOBAL slave_parallel_threads=$old_parallel_threads; > --source include/start_slave.inc > SET DEBUG_SYNC= 'RESET'; > > > === modified file 'mysql-test/suite/rpl/t/rpl_parallel_optimistic.test' > --- a/mysql-test/suite/rpl/t/rpl_parallel_optimistic.test 2014-09-24 > 19:25:10 +0000 > +++ b/mysql-test/suite/rpl/t/rpl_parallel_optimistic.test 2014-10-07 > 14:20:37 +0000 > @@ -11,11 +11,9 @@ CREATE TABLE t1 (a int PRIMARY KEY, b IN > --connection server_2 > --sync_with_master > SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads; > -SET @old_mode=@@GLOBAL.slave_parallel_mode; > --source include/stop_slave.inc > SET GLOBAL slave_parallel_threads=10; > -SET GLOBAL slave_parallel_mode="domain,transactional"; > -CHANGE MASTER TO master_use_gtid=slave_pos; > +CHANGE MASTER TO master_use_gtid=slave_pos, > parallel_mode=(domain,transactional); > > > --connection server_1 > @@ -309,8 +307,8 @@ SET GLOBAL tx_isolation= @old_isolation; > > --connection server_2 > --source include/stop_slave.inc > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > SET GLOBAL slave_parallel_threads=@old_parallel_threads; > -SET GLOBAL slave_parallel_mode=@old_mode; > --source include/start_slave.inc > > --connection server_1 > > === modified file > 'mysql-test/suite/rpl/t/rpl_parallel_optimistic_nobinlog.test' > --- a/mysql-test/suite/rpl/t/rpl_parallel_optimistic_nobinlog.test > 2014-09-24 19:25:10 +0000 > +++ b/mysql-test/suite/rpl/t/rpl_parallel_optimistic_nobinlog.test > 2014-10-07 14:20:37 +0000 > @@ -16,12 +16,10 @@ INSERT INTO t2 VALUES (1,0), (2,0); > --sync_with_master > SET @old_isolation= @@GLOBAL.tx_isolation; > SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads; > -SET @old_mode=@@GLOBAL.slave_parallel_mode; > --source include/stop_slave.inc > SET GLOBAL TRANSACTION ISOLATION LEVEL READ COMMITTED; > SET GLOBAL slave_parallel_threads=10; > -SET GLOBAL slave_parallel_mode="domain,transactional,waiting"; > -CHANGE MASTER TO master_use_gtid=slave_pos; > +CHANGE MASTER TO master_use_gtid=slave_pos, > parallel_mode=(domain,transactional,waiting); > > > --echo *** Test that we replicate correctly when using READ COMMITTED and > --log-slave-updates=0 on the slave *** > @@ -63,8 +61,8 @@ SELECT * FROM t2 ORDER BY a; > --connection server_2 > --source include/stop_slave.inc > SET GLOBAL tx_isolation= @old_isolation; > +CHANGE MASTER TO parallel_mode=(domain,groupcommit); > SET GLOBAL slave_parallel_threads=@old_parallel_threads; > -SET GLOBAL slave_parallel_mode=@old_mode; > --source include/start_slave.inc > > --connection server_1 > > === modified file 'sql/lex.h' > --- a/sql/lex.h 2014-02-02 09:00:36 +0000 > +++ b/sql/lex.h 2014-10-07 14:20:37 +0000 > @@ -194,6 +194,7 @@ static SYMBOL symbols[] = { > { "DISTINCTROW", SYM(DISTINCT)}, /* Access likes this */ > { "DIV", SYM(DIV_SYM)}, > { "DO", SYM(DO_SYM)}, > + { "DOMAIN", SYM(DOMAIN_SYM)}, > { "DOUBLE", SYM(DOUBLE_SYM)}, > { "DROP", SYM(DROP)}, > { "DUAL", SYM(DUAL_SYM)}, > @@ -257,6 +258,7 @@ static SYMBOL symbols[] = { > { "GRANT", SYM(GRANT)}, > { "GRANTS", SYM(GRANTS)}, > { "GROUP", SYM(GROUP_SYM)}, > + { "GROUPCOMMIT", SYM(GROUPCOMMIT_SYM)}, > { "HANDLER", SYM(HANDLER_SYM)}, > { "HARD", SYM(HARD_SYM)}, > { "HASH", SYM(HASH_SYM)}, > @@ -429,6 +431,7 @@ static SYMBOL symbols[] = { > { "PACK_KEYS", SYM(PACK_KEYS_SYM)}, > { "PAGE", SYM(PAGE_SYM)}, > { "PAGE_CHECKSUM", SYM(PAGE_CHECKSUM_SYM)}, > + { "PARALLEL_MODE", SYM(PARALLEL_MODE_SYM)}, > { "PARSER", SYM(PARSER_SYM)}, > { "PARSE_VCOL_EXPR", SYM(PARSE_VCOL_EXPR_SYM)}, > { "PARTIAL", SYM(PARTIAL)}, > @@ -650,6 +653,7 @@ static SYMBOL symbols[] = { > { "VIEW", SYM(VIEW_SYM)}, > { "VIRTUAL", SYM(VIRTUAL_SYM)}, > { "WAIT", SYM(WAIT_SYM)}, > + { "WAITING", SYM(WAITING_SYM)}, > { "WARNINGS", SYM(WARNINGS)}, > { "WEEK", SYM(WEEK_SYM)}, > { "WEIGHT_STRING", SYM(WEIGHT_STRING_SYM)}, > > === modified file 'sql/log_event.cc' > --- a/sql/log_event.cc 2014-09-25 13:47:58 +0000 > +++ b/sql/log_event.cc 2014-10-07 14:20:37 +0000 > @@ -12728,7 +12728,7 @@ bool rpl_get_position_info(const char ** > return FALSE; > #else > const Relay_log_info *rli= &(active_mi->rli); > - if (opt_slave_parallel_threads == 0) > + if (!rli->mi->using_parallel()) > { > *log_file_name= rli->group_master_log_name; > *log_pos= rli->group_master_log_pos + > > === modified file 'sql/mysqld.cc' > --- a/sql/mysqld.cc 2014-09-26 10:37:19 +0000 > +++ b/sql/mysqld.cc 2014-10-07 14:20:37 +0000 > @@ -562,8 +562,6 @@ ulong stored_program_cache_size= 0; > > ulong opt_slave_parallel_threads= 0; > ulong opt_slave_domain_parallel_threads= 0; > -ulonglong opt_slave_parallel_mode= > - SLAVE_PARALLEL_DOMAIN | SLAVE_PARALLEL_GROUPCOMMIT; > ulong opt_binlog_commit_wait_count= 0; > ulong opt_binlog_commit_wait_usec= 0; > ulong opt_slave_parallel_max_queued= 131072; > > === modified file 'sql/mysqld.h' > --- a/sql/mysqld.h 2014-09-26 10:37:19 +0000 > +++ b/sql/mysqld.h 2014-10-07 14:20:37 +0000 > @@ -187,7 +187,6 @@ extern ulong stored_program_cache_size; > extern ulong opt_slave_parallel_threads; > extern ulong opt_slave_domain_parallel_threads; > extern ulong opt_slave_parallel_max_queued; > -extern ulonglong opt_slave_parallel_mode; > extern ulong opt_binlog_commit_wait_count; > extern ulong opt_binlog_commit_wait_usec; > extern my_bool opt_gtid_ignore_duplicates; > > === modified file 'sql/rpl_mi.cc' > --- a/sql/rpl_mi.cc 2014-09-02 12:07:01 +0000 > +++ b/sql/rpl_mi.cc 2014-10-07 14:20:37 +0000 > @@ -40,7 +40,8 @@ Master_info::Master_info(LEX_STRING *con > heartbeat_period(0), received_heartbeats(0), master_id(0), > prev_master_id(0), > using_gtid(USE_GTID_NO), events_queued_since_last_gtid(0), > - gtid_reconnect_event_skip_count(0), gtid_event_seen(false) > + gtid_reconnect_event_skip_count(0), gtid_event_seen(false), > + parallel_mode(SLAVE_PARALLEL_DOMAIN|SLAVE_PARALLEL_GROUPCOMMIT) > { > host[0] = 0; user[0] = 0; password[0] = 0; > ssl_ca[0]= 0; ssl_capath[0]= 0; ssl_cert[0]= 0; > @@ -178,6 +179,7 @@ void init_master_log_pos(Master_info* mi > mi->events_queued_since_last_gtid= 0; > mi->gtid_reconnect_event_skip_count= 0; > mi->gtid_event_seen= false; > + mi->parallel_mode= SLAVE_PARALLEL_DOMAIN|SLAVE_PARALLEL_GROUPCOMMIT; > > /* Intentionally init ssl_verify_server_cert to 0, no option available > */ > mi->ssl_verify_server_cert= 0; > @@ -514,6 +516,22 @@ file '%s')", fname); > else > mi->using_gtid= Master_info::USE_GTID_NO; > } > + else if (!strncmp(buf, STRING_WITH_LEN("parallel_mode="))) > + { > + int val= atoi(buf + (sizeof("parallel_mode=") - 1)); > + mi->parallel_mode= val & (SLAVE_PARALLEL_DOMAIN | > + SLAVE_PARALLEL_GROUPCOMMIT | > + SLAVE_PARALLEL_TRX | > + SLAVE_PARALLEL_WAITING); > + } > + else if (!strncmp(buf, STRING_WITH_LEN("END_MARKER"))) > + { > + /* > + Guard agaist extra left-overs at the end of file, in case a > later > + update causes the file to shrink compared to earlier > contents. > + */ > + break; > + } > } > } > } > @@ -657,7 +675,9 @@ int flush_master_info(Master_info* mi, > my_b_printf(file, > > "%u\n%s\n%s\n%s\n%s\n%s\n%d\n%d\n%d\n%s\n%s\n%s\n%s\n%s\n%d\n%s\n%s\n%s\n%s\n%d\n%s\n%s\n" > "\n\n\n\n\n\n\n\n\n\n\n" > - "using_gtid=%d\n", > + "using_gtid=%d\n" > + "parallel_mode=%u\n" > + "END_MARKER\n", > LINES_IN_MASTER_INFO, > mi->master_log_name, llstr(mi->master_log_pos, lbuf), > mi->host, mi->user, > @@ -666,7 +686,7 @@ int flush_master_info(Master_info* mi, > mi->ssl_cipher, mi->ssl_key, mi->ssl_verify_server_cert, > heartbeat_buf, "", ignore_server_ids_buf, > "", 0, > - mi->ssl_crl, mi->ssl_crlpath, mi->using_gtid); > + mi->ssl_crl, mi->ssl_crlpath, mi->using_gtid, > mi->parallel_mode); > my_free(ignore_server_ids_buf); > err= flush_io_cache(file); > if (sync_masterinfo_period && !err && > > === modified file 'sql/rpl_mi.h' > --- a/sql/rpl_mi.h 2014-09-02 12:07:01 +0000 > +++ b/sql/rpl_mi.h 2014-10-07 14:20:37 +0000 > @@ -75,6 +75,10 @@ class Master_info : public Slave_reporti > return connection_name.str == 0; > } > static const char *using_gtid_astext(enum enum_using_gtid arg); > + bool using_parallel() > + { > + return opt_slave_parallel_threads > 0 && parallel_mode != 0; > + } > > /* the variables below are needed because we can change masters on the > fly */ > char master_log_name[FN_REFLEN+6]; /* Room for multi-*/ > @@ -178,6 +182,12 @@ class Master_info : public Slave_reporti > uint64 gtid_reconnect_event_skip_count; > /* gtid_event_seen is false until we receive first GTID event from > master. */ > bool gtid_event_seen; > + /* > + The parallel replication modes, if any. A combination (binary OR) of > any of > + SLAVE_PARALLEL_DOMAIN, SLAVE_PARALLEL_GROUPCOMMIT, > SLAVE_PARALLEL_TRX, and > + SLAVE_PARALLEL_WAITING. > + */ > + uint32 parallel_mode; > }; > int init_master_info(Master_info* mi, const char* master_info_fname, > const char* slave_info_fname, > > === modified file 'sql/rpl_parallel.cc' > --- a/sql/rpl_parallel.cc 2014-10-03 09:43:23 +0000 > +++ b/sql/rpl_parallel.cc 2014-10-07 14:20:37 +0000 > @@ -1891,6 +1891,7 @@ rpl_parallel::do_event(rpl_group_info *s > bool did_enter_cond= false; > PSI_stage_info old_stage; > > + DBUG_EXECUTE_IF("slave_crash_if_parallel_apply", DBUG_SUICIDE();); > /* Handle master log name change, seen in Rotate_log_event. */ > typ= ev->get_type_code(); > if (unlikely(typ == ROTATE_EVENT)) > @@ -1971,7 +1972,8 @@ rpl_parallel::do_event(rpl_group_info *s > if (typ == GTID_EVENT) > { > Gtid_log_event *gtid_ev= static_cast<Gtid_log_event *>(ev); > - uint32 domain_id= (rli->mi->using_gtid == Master_info::USE_GTID_NO ? > + uint32 domain_id= (rli->mi->using_gtid == Master_info::USE_GTID_NO || > + !(rli->mi->parallel_mode & SLAVE_PARALLEL_DOMAIN) ? > 0 : gtid_ev->domain_id); > if (!(e= find(domain_id))) > { > @@ -2012,7 +2014,7 @@ rpl_parallel::do_event(rpl_group_info *s > { > Gtid_log_event *gtid_ev= static_cast<Gtid_log_event *>(ev); > bool new_gco; > - ulonglong mode= opt_slave_parallel_mode; > + ulonglong mode= rli->mi->parallel_mode; > uchar gtid_flags= gtid_ev->flags2; > group_commit_orderer *gco; > uint8 force_switch_flag; > > === modified file 'sql/rpl_parallel.h' > --- a/sql/rpl_parallel.h 2014-10-03 09:43:23 +0000 > +++ b/sql/rpl_parallel.h 2014-10-07 14:20:37 +0000 > @@ -12,7 +12,11 @@ class Relay_log_info; > struct inuse_relaylog; > > > -/* Bit masks for the values in --slave-parallel-mode. */ > +/* > + Bit masks for the values in --slave-parallel-mode. > + Note that these values cannot be changed - they are stored in > master.info, > + so need to be possible to read back in a different version of the > server. > +*/ > #define SLAVE_PARALLEL_DOMAIN (1ULL << 0) > #define SLAVE_PARALLEL_GROUPCOMMIT (1ULL << 1) > #define SLAVE_PARALLEL_TRX (1ULL << 2) > > === modified file 'sql/share/errmsg-utf8.txt' > --- a/sql/share/errmsg-utf8.txt 2014-07-08 17:38:26 +0000 > +++ b/sql/share/errmsg-utf8.txt 2014-10-07 14:20:37 +0000 > @@ -7111,3 +7111,5 @@ ER_SLAVE_SKIP_NOT_IN_GTID > eng "When using GTID, @@sql_slave_skip_counter can not be used. > Instead, setting @@gtid_slave_pos explicitly can be used to skip to after a > given GTID position." > ER_TABLE_DEFINITION_TOO_BIG > eng "The definition for table %`s is too big" > +ER_INVALID_SLAVE_PARALLEL_MODE > + eng "Invalid use of '%s' option for PARALLEL_MODE in CHANGE > MASTER TO" > > === modified file 'sql/slave.cc' > --- a/sql/slave.cc 2014-09-02 12:07:01 +0000 > +++ b/sql/slave.cc 2014-10-07 14:20:37 +0000 > @@ -625,8 +625,7 @@ int terminate_slave_threads(Master_info* > if (thread_mask & (SLAVE_SQL|SLAVE_FORCE_ALL)) > { > DBUG_PRINT("info",("Terminating SQL thread")); > - if (opt_slave_parallel_threads > 0 && > - mi->rli.abort_slave && mi->rli.stop_for_until) > + if (mi->using_parallel() && mi->rli.abort_slave && > mi->rli.stop_for_until) > { > mi->rli.stop_for_until= false; > mi->rli.parallel.stop_during_until(); > @@ -2576,6 +2575,8 @@ static bool send_show_master_info_header > field_list.push_back(new Item_empty_string("Using_Gtid", > sizeof("Current_Pos")-1)); > field_list.push_back(new Item_empty_string("Gtid_IO_Pos", 30)); > + field_list.push_back(new Item_empty_string("Parallel_Mode", > + sizeof("domain,groupcommit,transactional,waiting")-1)); > if (full) > { > field_list.push_back(new Item_return_int("Retried_transactions", > @@ -2708,8 +2709,7 @@ static bool send_show_master_info_data(T > else > { > idle= mi->rli.sql_thread_caught_up; > - if (opt_slave_parallel_threads > 0 && idle && > - !mi->rli.parallel.workers_idle()) > + if (mi->using_parallel() && idle && > !mi->rli.parallel.workers_idle()) > idle= false; > } > if (idle) > @@ -2786,13 +2786,34 @@ static bool send_show_master_info_data(T > protocol->store(mi->ssl_ca, &my_charset_bin); > // Master_Ssl_Crlpath > protocol->store(mi->ssl_capath, &my_charset_bin); > + // Using_Gtid > protocol->store(mi->using_gtid_astext(mi->using_gtid), > &my_charset_bin); > + // Gtid_IO_Pos > { > char buff[30]; > String tmp(buff, sizeof(buff), system_charset_info); > mi->gtid_current_pos.to_string(&tmp); > protocol->store(tmp.ptr(), tmp.length(), &my_charset_bin); > } > + // Parallel_Mode > + { > + /* Note how sizeof("domain") has room for "domain," due to traling > 0. */ > + char buf[sizeof("domain") + sizeof("groupcommit") + > + sizeof("transactional") + sizeof("waiting") + 1]; > + char *p= buf; > + uint32 mode= mi->parallel_mode; > + if (mode & SLAVE_PARALLEL_DOMAIN) > + p= strmov(p, "domain,"); > + if (mode & SLAVE_PARALLEL_GROUPCOMMIT) > + p= strmov(p, "groupcommit,"); > + if (mode & SLAVE_PARALLEL_TRX) > + p= strmov(p, "transactional,"); > + if (mode & SLAVE_PARALLEL_WAITING) > + p= strmov(p, "waiting,"); > + if (p != buf) > + --p; // Discard last ',' > + protocol->store(buf, p-buf, &my_charset_bin); > + } > if (full) > { > protocol->store((uint32) mi->rli.retried_trans); > @@ -3521,7 +3542,7 @@ static int exec_relay_log_event(THD* thd > > update_state_of_relay_log(rli, ev); > > - if (opt_slave_parallel_threads > 0) > + if (rli->mi->using_parallel()) > { > int res= rli->parallel.do_event(serial_rgi, ev, event_size); > if (res >= 0) > @@ -4667,7 +4688,7 @@ log '%s' at position %s, relay log '%s' > } > } > > - if (opt_slave_parallel_threads > 0) > + if (mi->using_parallel()) > rli->parallel.wait_for_done(thd, rli); > > /* Thread stopped. Print the current replication position to the log */ > @@ -4693,7 +4714,7 @@ log '%s' at position %s, relay log '%s' > (We want the first one to be before the printout of stop position to > get the correct position printed.) > */ > - if (opt_slave_parallel_threads > 0) > + if (mi->using_parallel()) > rli->parallel.wait_for_done(thd, rli); > > /* > @@ -6314,7 +6335,7 @@ static Log_event* next_event(rpl_group_i > llstr(my_b_tell(cur_log),llbuf1), > llstr(rli->event_relay_log_pos,llbuf2))); > DBUG_ASSERT(my_b_tell(cur_log) >= BIN_LOG_HEADER_SIZE); > - DBUG_ASSERT(opt_slave_parallel_threads > 0 || > + DBUG_ASSERT(rli->mi->using_parallel() || > my_b_tell(cur_log) == rli->event_relay_log_pos); > } > #endif > > === modified file 'sql/sql_lex.h' > --- a/sql/sql_lex.h 2014-08-07 16:06:56 +0000 > +++ b/sql/sql_lex.h 2014-10-07 14:20:37 +0000 > @@ -218,11 +218,18 @@ struct LEX_MASTER_INFO > uint port, connect_retry; > float heartbeat_period; > /* > + Modes of parallel replication enabled, if any. A combination (binary > OR) of > + any of SLAVE_PARALLEL_DOMAIN, SLAVE_PARALLEL_GROUPCOMMIT, > + SLAVE_PARALLEL_TRX, and SLAVE_PARALLEL_WAITING. > + */ > + uint32 repl_parallel_mode; > + /* > Enum is used for making it possible to detect if the user > changed variable or if it should be left at old value > */ > enum {LEX_MI_UNCHANGED, LEX_MI_DISABLE, LEX_MI_ENABLE} > - ssl, ssl_verify_server_cert, heartbeat_opt, > repl_ignore_server_ids_opt; > + ssl, ssl_verify_server_cert, heartbeat_opt, > repl_ignore_server_ids_opt, > + repl_parallel_mode_opt; > enum { > LEX_GTID_UNCHANGED, LEX_GTID_NO, LEX_GTID_CURRENT_POS, > LEX_GTID_SLAVE_POS > } use_gtid_opt; > @@ -241,10 +248,11 @@ struct LEX_MASTER_INFO > pos= relay_log_pos= server_id= port= connect_retry= 0; > heartbeat_period= 0; > ssl= ssl_verify_server_cert= heartbeat_opt= > - repl_ignore_server_ids_opt= LEX_MI_UNCHANGED; > + repl_ignore_server_ids_opt= repl_parallel_mode_opt= > LEX_MI_UNCHANGED; > gtid_pos_str.length= 0; > gtid_pos_str.str= NULL; > use_gtid_opt= LEX_GTID_UNCHANGED; > + repl_parallel_mode= 0; > } > }; > > > === modified file 'sql/sql_repl.cc' > --- a/sql/sql_repl.cc 2014-08-07 16:06:56 +0000 > +++ b/sql/sql_repl.cc 2014-10-07 14:20:37 +0000 > @@ -3434,6 +3434,9 @@ bool change_master(THD* thd, Master_info > lex_mi->relay_log_name || lex_mi->relay_log_pos) > mi->using_gtid= Master_info::USE_GTID_NO; > > + if (lex_mi->repl_parallel_mode_opt != LEX_MASTER_INFO::LEX_MI_UNCHANGED) > + mi->parallel_mode= lex_mi->repl_parallel_mode; > + > /* > If user did specify neither host nor port nor any log name nor any log > pos, i.e. he specified only user/password/master_connect_retry, he > probably > > === modified file 'sql/sql_yacc.yy' > --- a/sql/sql_yacc.yy 2014-09-03 14:24:31 +0000 > +++ b/sql/sql_yacc.yy 2014-10-07 14:20:37 +0000 > @@ -1130,6 +1130,7 @@ bool my_yyoverflow(short **a, YYSTYPE ** > %token DIV_SYM > %token DOUBLE_SYM /* SQL-2003-R */ > %token DO_SYM > +%token DOMAIN_SYM > %token DROP /* SQL-2003-R */ > %token DUAL_SYM > %token DUMPFILE > @@ -1194,6 +1195,7 @@ bool my_yyoverflow(short **a, YYSTYPE ** > %token GRANT /* SQL-2003-R */ > %token GRANTS > %token GROUP_SYM /* SQL-2003-R */ > +%token GROUPCOMMIT_SYM > %token GROUP_CONCAT_SYM > %token GT_SYM /* OPERATOR */ > %token HANDLER_SYM > @@ -1376,6 +1378,7 @@ bool my_yyoverflow(short **a, YYSTYPE ** > %token PACK_KEYS_SYM > %token PAGE_SYM > %token PAGE_CHECKSUM_SYM > +%token PARALLEL_MODE_SYM > %token PARAM_MARKER > %token PARSER_SYM > %token PARSE_VCOL_EXPR_SYM > @@ -1604,6 +1607,7 @@ bool my_yyoverflow(short **a, YYSTYPE ** > %token VIEW_SYM /* SQL-2003-N */ > %token VIRTUAL_SYM > %token WAIT_SYM > +%token WAITING_SYM > %token WARNINGS > %token WEEK_SYM > %token WEIGHT_STRING_SYM > @@ -2244,6 +2248,14 @@ rule: <-- starts at col 1 > { > Lex->mi.repl_ignore_server_ids_opt= > LEX_MASTER_INFO::LEX_MI_ENABLE; > } > + | PARALLEL_MODE_SYM EQ '(' ')' > + { > + Lex->mi.repl_parallel_mode_opt= > LEX_MASTER_INFO::LEX_MI_DISABLE; > + } > + | PARALLEL_MODE_SYM EQ '(' parallel_mode_list ')' > + { > + Lex->mi.repl_parallel_mode_opt= > LEX_MASTER_INFO::LEX_MI_ENABLE; > + } > | > master_file_def > ; > @@ -2260,6 +2272,52 @@ rule: <-- starts at col 1 > insert_dynamic(&Lex->mi.repl_ignore_server_ids, (uchar*) > &($1)); > } > > +parallel_mode_list: > + parallel_mode_option > + | parallel_mode_list ',' parallel_mode_option > + ; > + > +parallel_mode_option: > + DOMAIN_SYM > + { > + if (Lex->mi.repl_parallel_mode & SLAVE_PARALLEL_DOMAIN) > + { > + my_error(ER_INVALID_SLAVE_PARALLEL_MODE, MYF(0), > "domain"); > + MYSQL_YYABORT; > + } > + Lex->mi.repl_parallel_mode|= SLAVE_PARALLEL_DOMAIN; > + } > + | GROUPCOMMIT_SYM > + { > + if (Lex->mi.repl_parallel_mode & > + (SLAVE_PARALLEL_GROUPCOMMIT|SLAVE_PARALLEL_TRX)) > + { > + my_error(ER_INVALID_SLAVE_PARALLEL_MODE, MYF(0), > "groupcommit"); > + MYSQL_YYABORT; > + } > + Lex->mi.repl_parallel_mode|= SLAVE_PARALLEL_GROUPCOMMIT; > + } > + | TRANSACTIONAL_SYM > + { > + if (Lex->mi.repl_parallel_mode & > + (SLAVE_PARALLEL_GROUPCOMMIT|SLAVE_PARALLEL_TRX)) > + { > + my_error(ER_INVALID_SLAVE_PARALLEL_MODE, MYF(0), > "transactional"); > + MYSQL_YYABORT; > + } > + Lex->mi.repl_parallel_mode|= SLAVE_PARALLEL_TRX; > + } > + | WAITING_SYM > + { > + if (Lex->mi.repl_parallel_mode & SLAVE_PARALLEL_WAITING) > + { > + my_error(ER_INVALID_SLAVE_PARALLEL_MODE, MYF(0), > "waiting"); > + MYSQL_YYABORT; > + } > + Lex->mi.repl_parallel_mode|= SLAVE_PARALLEL_WAITING; > + } > + > + > master_file_def: > MASTER_LOG_FILE_SYM EQ TEXT_STRING_sys > { > @@ -14098,6 +14156,7 @@ user: user_maybe_role > | DISABLE_SYM {} > | DISCARD {} > | DISK_SYM {} > + | DOMAIN_SYM {} > | DUMPFILE {} > | DUPLICATE_SYM {} > | DYNAMIC_SYM {} > @@ -14131,6 +14190,7 @@ user: user_maybe_role > | GET_FORMAT {} > | GRANTS {} > | GLOBAL_SYM {} > + | GROUPCOMMIT_SYM {} > | HASH_SYM {} > | HARD_SYM {} > | HOSTS_SYM {} > @@ -14221,6 +14281,7 @@ user: user_maybe_role > | ONLY_SYM {} > | PACK_KEYS_SYM {} > | PAGE_SYM {} > + | PARALLEL_MODE_SYM {} > | PARTIAL {} > | PARTITIONING_SYM {} > | PARTITIONS_SYM {} > @@ -14336,6 +14397,7 @@ user: user_maybe_role > | VALUE_SYM {} > | WARNINGS {} > | WAIT_SYM {} > + | WAITING_SYM {} > | WEEK_SYM {} > | WEIGHT_STRING_SYM {} > | WORK_SYM {} > > === modified file 'sql/sys_vars.cc' > --- a/sql/sys_vars.cc 2014-09-19 13:25:37 +0000 > +++ b/sql/sys_vars.cc 2014-10-07 14:20:37 +0000 > @@ -1834,31 +1834,11 @@ static Sys_var_ulong Sys_slave_parallel_ > VALID_RANGE(0,2147483647), DEFAULT(131072), BLOCK_SIZE(1)); > > > -static const char *slave_parallel_mode_names[] = { > - "domain", "groupcommit", "transactional", "waiting", NULL > -}; > - > -static Sys_var_set Sys_slave_parallel_mode( > - "slave_parallel_mode", > - "Controls what transactions are applied in parallel when using " > - "--slave-parallel-threads. Syntax: > slave_paralle_mode=value[,value...], " > - "where \"value\" could be one or more of: \"domain\", to apply " > - "different replication domains in parallel; \"groupcommit\", to > apply " > - "in parallel transactions that group-committed together on the > master; " > - "\"transactional\", to optimistically try to apply all > transactional " > - "DML in parallel; and \"waiting\" to extend \"transactional\" to " > - "even transactions that had to wait on the master.", > - GLOBAL_VAR(opt_slave_parallel_mode), CMD_LINE(REQUIRED_ARG), > - slave_parallel_mode_names, > - DEFAULT(SLAVE_PARALLEL_DOMAIN | > - SLAVE_PARALLEL_GROUPCOMMIT)); > - > - > static Sys_var_bit Sys_replicate_allow_parallel( > "replicate_allow_parallel", > "If set when a transaction is written to the binlog, that > transaction " > - "is allowed to replicate in parallel on a slave where " > - "slave_parallel_mode is set to \"transactional\". Can be cleared > for " > + "is allowed to replicate in parallel on a slave where > parallel_mode " > + "is set to \"transactional\" (in CHANGE MASTER). Can be cleared > for " > "transactions that are likely to cause a conflict if replicated in > " > "parallel, to avoid unnecessary rollback and retry.", > SESSION_ONLY(option_bits), NO_CMD_LINE, OPTION_RPL_ALLOW_PARALLEL, > > _______________________________________________ > commits mailing list > commits(a)mariadb.org > https://lists.askmonty.org/cgi-bin/mailman/listinfo/commits >

2 1

[Maria-developers] MDEV-6429 (storage engine API for parallel replication) possibly a requirement for MDEV-6676 (speculative parallel replication)
by Kristian Nielsen 06 Oct '14

06 Oct '14

Hi Serg, Earlier this year we discussed MDEV-6429, which is to implement a proper storage engine API for a feature used in parallel replication. This is where InnoDB reports to the replication layer whenever transaction T1 needs to wait for T2; parallel replication uses this to detect and resolve deadlocks caused by enforced commit order. In 10.0, we decided to not do a "proper" API, instead just modify InnoDB to call into the server layer directly. In 10.0, the need for this API/feature is somewhat InnoDB-specific, it is not known whether any of the other transactional storage engines would need to do anything similar for parallel replication to work. If we implement MDEV-6676, however, then the need for the API becomes more critical. Because MDEV-6676 absolutely only works if we have a mechanism to detect conflicts that cause a deadlock with commit order, as was implemented for InnoDB. If we were to attempt to enable speculative parallel replication for eg. Tokutek transactions, without implementing the necessary check in Tokutek, then the slave would quickly end up hanging. Thinking more on this, I suppose what we really need is what you requested also during the original discussion: A true optional feature for storage engines to implement this additional check. And a way for the server layer to see if a storage engine has the implementation. If it does, then we can try to run its transactions in parallel as per MDEV-6676. If not, we will not try, and things will still work correctly (just without the parallelisation optimisation). Maybe for the first version, the best thing to do is to just hard-code a check for the InnoDB storage engine. This will allow us to get real-world testing to see if the new speculative parallel replication feature is interesting to any users. Then if it is, and there turns out to be interest from other storage engine venders (such as Tokutek) to also support speculative parallel replication, we can work with them to implement a proper API. This approach would also allow to consider the needs of a different storage engine when designing the API, which makes it much more likely that the API will be of general use and not too tied to InnoDB internals. What do you think? - Kristian.

1 0

[Maria-developers] MariaDB Debian packaging: pending merge to upstream
by Otto Kekäläinen 03 Oct '14

03 Oct '14

Hello! Now when the rehearsal is done using simple spelling error fix patches, I now posted the first big merge request about my 5.5/debian upon the upstream 5.5 branch. Issue at https://mariadb.atlassian.net/browse/MDEV-6284 Merge request at https://code.launchpad.net/~otto/maria/maria-fix-debpkg-5.5/+merge/221576 I also have these old merge request still open: https://code.launchpad.net/~otto/maria/maria-fix-debian-copyright-trunk/+me… https://code.launchpad.net/~otto/maria/maria-fix-debian-copyright-5.5/+merg… The sooner somebody has can merge these the less likely it is that there will be merge conflicts.. Thanks! -- Check out our blog at http://seravo.fi/blog and follow @ottokekalainen

2 6

Re: [Maria-developers] Fwd: [Commits] Rev 3897: bzr merge -r4123..4144 codership/5.6 in lp:~maria-captains/maria/maria-10.0-galera
by Philip Stoev 01 Oct '14

01 Oct '14

Hello, Thanks for taking the time to review this. Your concerns are spot-on. == modified file 'mysql-test/mysql-test-run.pl' --- a/mysql-test/mysql-test-run.pl 2014-09-29 00:43:56 +0000 +++ b/mysql-test/mysql-test-run.pl 2014-09-30 22:06:15 +0000 @@ -3189,6 +3189,9 @@ mtr_report(" - adding wsrep, galera to default test suites"); push @DEFAULT_SUITES, qw(wsrep galera); + # ADD scripts to $PATH to that wsrep_sst_* can be found + $ENV{'PATH'} = $ENV{'PATH'}.':'.$basedir.'/ scripts'; > Is this the right place to do this ? Serg already commented about the fact > that we should not "temper" mtr globally, instead only when galera tests > are run, I just wonder because at scripts directory contain other than > wsrep scripts, does this affect existing tests... Yes, you are right, I reverted this change and moved it into suite/galera/galera2nodes.cnf, which now looks like this: [ENV] PATH=/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:@ENV.MYSQL_BINDIR/scripts Unfortunately, in the context of .cnf files, MTR does not allow to simply append to the existing $PATH, so I have to reinitialize it from scratch. === modified file 'mysql-test/suite/galera/ galera_2nodes.cnf' --- a/mysql-test/suite/galera/galera_2nodes.cnf 2014-08-26 20:23:56 +0000 +++ b/mysql-test/suite/galera/galera_2nodes.cnf 2014-09-30 22:06:15 +0000 @@ -2,22 +2,36 @@ !include include/default_mysqld.cnf [mysqld.1] +innodb_file_per_table binlog-format=row +innodb_file_format=Barracuda +performance_schema=OFF + wsrep_provider=(a)ENV.WSREP_PROVIDER wsrep_cluster_address='gcomm://' wsrep_provider_options='base_port=(a)mysqld.1.#galera_port' wsrep_sst_receive_address='127.0.0.1:@mysqld.1.#sst_port' # enforce read-committed characteristics across the cluster wsrep_causal_reads=ON +wsrep_sync_wait = 7 +wsrep_node_address=127.0.0.1 +wsrep_node_incoming_address=127.0.0.1 > Why we need to have innodb_file_per_table=1, innodb_file_format=Barracuda > and performance_schema=OFF ? I have removed those options. performance_schema was OFF because there was an assertion that affected all the tests. Secondly, why wsrep_sync_wait=7 (can't these different numbers have more meaningful values i.e. enum ?) This is required to ensure that all statements see the latest state of the database, allowing for deterministic tests. With respect to using a bitmask vs. an enum, please feel free to open an issue in LaunchPad. Philip Stoev

1 0

Re: [Maria-developers] [Commits] Rev 3897: bzr merge -r4123..4144 codership/5.6 in lp:~maria-captains/maria/maria-10.0-galera
by Sergei Golubchik 01 Oct '14

01 Oct '14

Hi, Jan! On Oct 01, Jan Lindström wrote: > Hi Nirbhay, Philip > > First of all, it is good to see that we have more galera tests. Few > questions: > > == modified file 'mysql-test/mysql-test-run.pl' > --- a/mysql-test/mysql-test-run.pl 2014-09-29 00:43:56 +0000 > +++ b/mysql-test/mysql-test-run.pl 2014-09-30 22:06:15 +0000 > @@ -3189,6 +3189,9 @@ > mtr_report(" - adding wsrep, galera to default test suites"); > push @DEFAULT_SUITES, qw(wsrep galera); > > + # ADD scripts to $PATH to that wsrep_sst_* can be found > + $ENV{'PATH'} = $ENV{'PATH'}.':'.$basedir.'/scripts'; > > Is this the right place to do this ? Serg already commented about the fact > that we should not "temper" mtr globally, instead only when galera tests > are run, I just wonder because at scripts directory contain other than > wsrep scripts, does this affect existing tests... And, just to note, in 10.1 I did it somewhat differently: my ($path) = grep { -f "$_/wsrep_sst_rsync"; } "$::bindir/scripts", $::path_client_bindir; return "No SST scripts" unless $path; $ENV{PATH}="$path:$ENV{PATH}"; Note the differences: - I check whether a script really exists - I look in two locations - same paths where mtr looks for mysqlhotcopy - the path is added to the beginning of the PATH, because we want to find our scripts before any other similar scripts that might happen to be in the PATH because of the existing MariaDB-Galera installation Regards, Sergei

1 0

[Maria-developers] Aria bug with query cache - wrong result and wrong table invalidation
by Roberto Spadim 30 Sep '14

30 Sep '14

Hi guys, could someone take a look at MDEV-6817? i'm testing a stress test with aria and row_format=page the problem is, running many php>while(1){ mysql>select max(column) from table; php> get the value, sum+1 mysql>insert into table (the value of column+1) php>} i got some problems... the value of the first max(column) sometimes return an old value in others words, the query isn't consistent, or the table invalidation code is wrong i got a value 296 at query cache if i change the autocommit from 1 to 0, i got a value of 297, i could use SQL_NO_CACHE and got the same 297 value the problem only occur with row_format=page -- Roberto Spadim SPAEmpresarial Eng. Automação e Controle

1 0

Re: [Maria-developers] Patch: CREATE [[NO] FORCE] VIEW Links
by James Briggs 30 Sep '14

30 Sep '14

Hi folks. Thank you Elena for commenting on MDEV-6709 "Disambiguating "CREATE FORCE VIEW view1 AS SELECT * FROM TABLE1" "As I understand, your patch hasn't been accepted/merged into the main tree yet. Why don't you apply the bugfix in your tree and resubmit the patch?" 1) MDEV-6709 is a related but separate issue from my FORCE patch, applying to MDEV-356 and others. I think it should be a separate patch. 2) What would you like me to do next to get my original patch accepted? 3) Who is the current maintainer for views? I feel that the view features are only 50% implemented in MariaDB and need some design effort. Thanks, James Briggs. -- Cassandra/MySQL DBA. Available in San Jose area or remote. ________________________________ From: James Briggs <actionmessage(a)yahoo.com> To: Maria-developers <maria-developers(a)lists.launchpad.net> Sent: Monday, September 8, 2014 2:52 PM Subject: Patch: CREATE [[NO] FORCE] VIEW Links Hi List. I mailed two patches to the list to implement CREATE [[NO] FORCE] plus tests this weekend. It looks like the mailing list software filters out long posts, so here are links to the list archives: Patch: CREATE [[NO] FORCE] VIEW Options https://lists.launchpad.net/maria-developers/msg07681.html Patch: CREATE VIEW test program https://lists.launchpad.net/maria-developers/msg07682.htm Thanks, James Briggs. -- Available for MySQL/NoSQL DBA/Programming in San Jose area or remote.

1 0