- developers - lists.mariadb.org

[Maria-developers] MWL#90: need a list of "obvious things to improve"
by Sergey Petrunya 09 Dec '10

09 Dec '10

Hi Timour, In Helsinki, we've noted the following: > MWL#90: Subqueries: Inside-out execution for non-semijoin materialized subqueries in WHERE (4K diff); Critical task > = Get the code reviewed/pushed > TODO: > - Timour will tell the "obvious things to improve"; Timour 1 day I'm going to need those "obvious things" fairly soon. Do you need to have anything as a prerequisite to produce the list? BR Sergey -- Sergey Petrunia, Software Developer Monty Program AB, http://askmonty.org Blog: http://s.petrunia.net/blog

1 0

[Maria-developers] Philip please test maria-5.3-mwl128-dsmrr-cpk
by Sergey Petrunya 09 Dec '10

09 Dec '10

Hi Philip, The new version of MWL#121-125, DS-MRR impovements, is ready for your testing. I believe all previously reported crashes and wrong query result bugs are no longer there (they've been either targeted and fixed, or were gone after code re-working I've made when addressing review feedback). The slowdown bugs (https://bugs.launchpad.net/maria/+bug/637160, https://bugs.launchpad.net/maria/+bug/631504) are most likely still there (I didn't check if they are, but I haven't made any changes that could impact them). The code to be tested is at lp:~maria-captains/maria/maria-5.3-mwl128-dsmrr-cpk. BR Sergey -- Sergey Petrunia, Software Developer Monty Program AB, http://askmonty.org Blog: http://s.petrunia.net/blog

1 0

[Maria-developers] sql-bench results for MariaDB string optimization
by Hakan Kuecuekyilmaz 09 Dec '10

09 Dec '10

Hi Monty, here are the results comparing your string optimization patch with MariaDB 5.2 and sql-bench. I added the configuration used, a short summary, and a full summary of the results. I ran the test on our new machine "pitbull", a two socket hexa-core Intel Xeon X5660 @ 2.80GHz with 23GB RAM with a single S-ATA disk. Todo: the tests show a couple of results with 0 - 1 wallclock seconds, which is due the quite faster machine. I will adjust the tests to run for at least 5 seconds (again). I attached the result file for the that the results are not good readable in this email. Best, Hakan hakan@pitbull:~/work/monty_program/mariadb-tools/sql-bench$ more conf/sql-bench-only_myisam.cnf # Base configuration for running sql-bench tests for MariaDB > 5.2.2. # # This is the minimal base test version # # Hakan Kuecuekyilmaz, <hakan at askmonty dot org>, 2010-11-18. # Configure environment variables. # Note: ccache is checked in the host specific config file. $ENV{'CC'} = "gcc"; $ENV{'CFLAGS'} = "-Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparenthese s -Wsign-compare -Wwrite-strings -Wunused-function -Wunused-label -Wunused-value -Wunused-variable -Wunused-paramete r -O3 -fno-omit-frame-pointer"; $ENV{'CXX'} = "gcc"; $ENV{'CXXFLAGS'} = "-Wimplicit -Wreturn-type -Wswitch -Wtrigraphs -Wcomment -W -Wchar-subscripts -Wformat -Wparenthe ses -Wsign-compare -Wwrite-strings -Wunused-function -Wunused-label -Wunused-value -Wunused-variable -Wreorder -Wcto r-dtor-privacy -Wnon-virtual-dtor -felide-constructors -fno-exceptions -fno-rtti -O3 -fno-omit-frame-pointer"; $ENV{'CXXLDFLAGS'} = ""; $config = { # Configure invocation line. # Do not use --prefix here. configure_line => '--enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-plugin-aria --with-aria-tmp-tables --without-plugin-innodb_plugin --with-mysqld-ldflags=-static --with-client -ldflags=-static --with-readline --with-ssl --with-plugins=max-no-ndb --with-embedded-server --with-libevent --enabl e-local-infile', }; # # Different test to be run with the above configuration. # The sql-bench-test will automaticly get --suffix=_test_name as an argument # The different options that can be used are: # # mysqld_start_options Options given to the mysqld that is started. # This is prefixed with --skip-grant. # mysqld_init_command SQL commands given to mysqld before tests starts. # sql_bench_options Options given to sql-bench. # $sql_bench_test->{'base'} = { mysqld_start_options => '', mysqld_init_command => '', sql_bench_options => '--comment="base test (with MyISAM)"', }; # This has to be the last line. See "perldoc -f require" for details. 1; RESULTS: Comparing 5.2 plain against patched 5.2 (three runs opt1/opt2/opt3) Overall the string optimization patch shows better results. Highlights are * Biggest gain we see in "connect": ~ 4 - 15% * Biggest loss we see in "insert": ~ 1 - 3% Biggest loss in detail: connect (50000) | 41.00| 1.024| 1.024| 1.000| connect+select_1_row (50000) | 48.00| 1.042| 1.042| 1.021| connect+select_simple (50000) | 45.00| 1.022| 1.022| 1.022| count_distinct_big (720) | 19.00| 1.105| 1.000| 1.053| count_distinct_group_on_key (7000) | 29.00| 1.034| 1.000| 1.034| count_group_on_key_parts (7000) | 27.00| 1.074| 1.000| 1.037| create_MANY_tables (400) | 17.00| 1.059| 1.059| 1.059| delete_all_many_keys (1) | 5.00| 1.200| 1.200| 1.000| delete_big_many_keys (128) | 5.00| 1.200| 1.200| 1.000| insert (350768) | 39.00| 1.103| 1.077| 1.051| insert_duplicates (100000) | 9.00| 1.000| 1.444| 1.333| insert_duplicates (100000) | 9.00| 1.000| 1.444| 1.333| min_max (60) | 1.00| 2.000| 1.000| 2.000| once_prepared_select (100000) | 13.00| 1.000| 1.308| 1.231| order_by_big (10) | 5.00| 1.000| 1.200| 1.200| order_by_big_key_desc (10) | 5.00| 1.200| 1.000| 1.200| outer_join_not_found (500) | 4.00| 1.250| 1.000| 1.250| select_big (80) | 5.00| 1.200| 1.000| 1.200| select_big_str (50000) | 14.00| 1.071| 1.071| 1.071| update_of_key (50000) | 6.00| 1.167| 1.333| 1.333| update_with_key (300000) | 30.00| 1.133| 1.333| 1.333| update_with_key_prefix (100000) | 10.00| 1.100| 1.400| 1.400| Full results: hakan@pitbull:~/sql-bench-results/pitbull$ /tmp/tmp.jAANb0DlLs/install/sql-bench/compare-results 2010-12-08-5.2-base/base/RUN-mysql-Linux_2.6.35_23_server_x86_64 2010-12-08-5.2-string-opt1/base/RUN-mysql-Linux_2.6.35_23_server_x86_64 2010-12-08-5.2-string-opt2/base/RUN-mysql-Linux_2.6.35_23_server_x86_64 2010-12-09-5.2-string-opt3/base/RUN-mysql-Linux_2.6.35_23_server_x86_64 --relative This is the result file of the different benchmark tests. The number in () after each tests shows how many SQL commands the particular test did. As one test may have many different parameters this gives only a rough picture of what was done. Check the source for more information :) Keep in mind that one can't compare benchmarks run with different --cmp options. The --cmp options sets the all limits according to the worst limit for all server in the benchmark. Numbers marked with '+' are estimated according to previous runs because the query took longer than a given time-limit to finish. The estimation shouldn't be far from the real result thought. Numbers marked with '?' contains results that gave wrong result. This can only be used as an indication of how long it took for the server to produce a wrong result :) Numbers marked with '*' are tests that was run a different number times than the test in the first column. The reason for this is normally that the marked test was run with different options that affects the number of tests or that the test was from another version of the MySQL benchmarks. Hope this will give you some idea how each db is performing at what thing .... Hope you like it .... Luuk & Monty (1997) Column 1 is in seconds. All other columns are presented relative to this. 1.00 is the same, bigger numbers indicates slower The result logs which where found and the options: 1 mysql-Linux_2.6.35_23_server_x86_64 : MySQL 5.2.4 MariaDB --socket=/tmp/tmp.bn05ikyeM5/mysql.sock base test (with MyISAM) 2 mysql-Linux_2.6.35_23_server_x86_64 : MySQL 5.2.4 MariaDB --socket=/tmp/tmp.eNBvB5BqYb/mysql.sock base test (with MyISAM) 3 mysql-Linux_2.6.35_23_server_x86_64 : MySQL 5.2.4 MariaDB --socket=/tmp/tmp.AG0msBbvC2/mysql.sock base test (with MyISAM) 4 mysql-Linux_2.6.35_23_server_x86_64 : MySQL 5.2.4 MariaDB --socket=/tmp/tmp.jAANb0DlLs/mysql.sock base test (with MyISAM) ================================================================================= Operation | 1| 2| 3| 4| |mysql-Linu|mysql-Linu|mysql-Linu|mysql-Linu| --------------------------------------------------------------------------------- Relative results per test (First column is in seconds): | --------------------------------------------------------------------------------- ATIS | 407.00| 0.980| 0.983| 0.978| alter-table | 112.00| 0.991| 0.955| 0.991| big-tables | 425.00| 0.965| 0.953| 0.958| connect | 403.00| 0.893| 0.963| 0.846| create | 918.00| 0.997| 1.001| 0.971| insert | 536.00| 1.007| 1.034| 1.011| select | 417.00| 0.959| 0.868| 0.986| wisconsin | 408.00| 1.007| 0.983| 0.985| --------------------------------------------------------------------------------- The results per operation: | --------------------------------------------------------------------------------- alter_table_add (992) | 73.00| 0.973| 0.945| 0.973| alter_table_drop (496) | 38.00| 1.026| 0.947| 1.000| connect (50000) | 41.00| 1.024| 1.024| 1.000| connect+select_1_row (50000) | 48.00| 1.042| 1.042| 1.021| connect+select_simple (50000) | 45.00| 1.022| 1.022| 1.022| count (100) | 3.00| 0.667| 0.667| 0.667| count_distinct (7000) | 22.00| 1.000| 1.000| 1.000| count_distinct_2 (7000) | 38.00| 1.000| 1.000| 1.000| count_distinct_big (720) | 19.00| 1.105| 1.000| 1.053| count_distinct_group (7000) | 36.00| 0.667| 0.667| 0.972| count_distinct_group_on_key (7000) | 29.00| 1.034| 1.000| 1.034| count_distinct_group_on_key_parts (7| 33.00| 1.000| 0.697| 0.818| count_distinct_key_prefix (7000) | 15.00| 1.000| 0.933| 1.000| count_group (7000) | 33.00| 1.000| 0.606| 1.030| count_group_on_key_parts (7000) | 27.00| 1.074| 1.000| 1.037| count_group_with_order (7000) | 34.00| 1.000| 0.618| 1.029| count_on_key (50100) | 66.00| 0.848| 0.955| 0.955| create+drop (10000) | 450.00| 1.002| 1.007| 0.973| create_MANY_tables (400) | 17.00| 1.059| 1.059| 1.059| create_index (8) | 0.00| 1.000| 0.000| 1.000| create_key+drop (10000) | 450.00| 0.991| 0.996| 0.967| create_table (31) | 2.00| 0.500| 0.500| 0.500| delete_all_many_keys (1) | 5.00| 1.200| 1.200| 1.000| delete_big (1) | 0.00| 0.000| 0.000| 0.000| delete_big_many_keys (128) | 5.00| 1.200| 1.200| 1.000| delete_key (10000) | 2.00| 0.500| 0.500| 0.500| delete_range (12) | 1.00| 2.000| 1.000| 1.000| drop_index (8) | 1.00| 0.000| 1.000| 1.000| drop_table (28) | 0.00| 0.000| 0.000| 0.000| drop_table_when_MANY_tables (400) | 1.00| 0.000| 0.000| 0.000| insert (350768) | 39.00| 1.103| 1.077| 1.051| insert_duplicates (100000) | 9.00| 1.000| 1.444| 1.333| insert_key (100000) | 25.00| 0.960| 1.040| 0.960| insert_many_fields (140000) | 112.00| 0.982| 0.982| 0.982| insert_select_1_key (1) | 1.00| 1.000| 1.000| 1.000| insert_select_2_keys (1) | 0.00| 0.000| 1.000| 1.000| min_max (60) | 1.00| 2.000| 1.000| 2.000| min_max_on_key (85000) | 16.00| 1.000| 1.000| 1.000| multiple_value_insert (100000) | 1.00| 0.000| 1.000| 1.000| once_prepared_select (100000) | 13.00| 1.000| 1.308| 1.231| order_by_big (10) | 5.00| 1.000| 1.200| 1.200| order_by_big_key (10) | 6.00| 0.833| 1.000| 0.833| order_by_big_key2 (10) | 5.00| 1.000| 1.000| 1.200| order_by_big_key_desc (10) | 5.00| 1.200| 1.000| 1.200| order_by_big_key_diff (10) | 6.00| 1.000| 0.833| 0.833| order_by_big_key_prefix (10) | 5.00| 1.000| 1.200| 1.000| order_by_key2_diff (500) | 1.00| 1.000| 1.000| 1.000| order_by_key_prefix (500) | 1.00| 1.000| 1.000| 1.000| order_by_range (500) | 1.00| 1.000| 0.000| 0.000| outer_join (10) | 5.00| 1.000| 1.200| 1.000| outer_join_found (10) | 5.00| 1.000| 1.000| 1.000| outer_join_not_found (500) | 4.00| 1.250| 1.000| 1.250| outer_join_on_key (10) | 5.00| 1.000| 0.800| 1.000| prepared_select (100000) | 22.00| 0.955| 0.955| 0.955| select_1_row (500000) | 52.00| 0.750| 0.788| 0.673| select_1_row_cache (500000) | 50.00| 0.660| 0.700| 0.660| select_2_rows (500000) | 57.00| 0.772| 0.947| 0.684| select_big (80) | 5.00| 1.200| 1.000| 1.200| select_big_str (50000) | 14.00| 1.071| 1.071| 1.071| select_cache (10000) | 18.00| 1.000| 0.944| 0.944| select_cache2 (10000) | 18.00| 0.944| 0.944| 0.944| select_column+column (500000) | 53.00| 0.925| 0.830| 0.792| select_diff_key (500) | 0.00| 0.000| 0.000| 0.000| select_distinct (40000) | 113.00| 1.018| 1.009| 1.009| select_group (140111) | 121.00| 1.008| 1.041| 1.000| select_group_when_MANY_tables (400) | 0.00| 0.000| 0.000| 0.000| select_join (5000) | 22.00| 1.000| 1.000| 1.000| select_key (200000) | 43.00| 1.000| 0.977| 0.953| select_key2 (200000) | 46.00| 0.978| 0.957| 0.957| select_key2_return_key (200000) | 44.00| 1.000| 0.977| 0.955| select_key2_return_prim (200000) | 46.00| 0.978| 0.935| 0.935| select_key_prefix (200000) | 46.00| 1.022| 0.957| 0.957| select_key_prefix_join (5000) | 131.00| 0.908| 0.893| 0.916| select_key_return_key (200000) | 43.00| 0.953| 0.953| 0.953| select_many_fields (140000) | 313.00| 0.958| 0.942| 0.949| select_range (410) | 22.00| 0.955| 0.955| 1.000| select_range_key2 (25010) | 5.00| 1.000| 1.200| 1.000| select_range_prefix (25010) | 6.00| 1.000| 1.000| 1.000| select_simple (500000) | 22.00| 1.000| 1.318| 0.955| select_simple_cache (500000) | 21.00| 0.952| 1.524| 0.952| select_simple_join (25000) | 22.00| 1.045| 1.045| 1.000| update_big (10) | 4.00| 1.000| 1.000| 1.000| update_of_key (50000) | 6.00| 1.167| 1.333| 1.333| update_of_key_big (501) | 3.00| 1.000| 1.000| 0.667| update_of_primary_key_many_keys (256| 3.00| 0.667| 1.000| 0.667| update_with_key (300000) | 30.00| 1.133| 1.333| 1.333| update_with_key_prefix (100000) | 10.00| 1.100| 1.400| 1.400| wisc_benchmark (50014) | 403.00| 1.010| 0.988| 0.988| --------------------------------------------------------------------------------- TOTALS | 3619.00| 0.978| 0.975| 0.966| ================================================================================= -- Hakan Küçükyılmaz, QA/Benchmark Engineer, Stuttgart/Germany Monty Program Ab, http://askmonty.org/ Skype: hakank_ Phone: +49 171 1919839

1 0

[Maria-developers] bringing mysql-5.5 cmake goodies into MariaDB?
by Vladislav Vaintroub 08 Dec '10

08 Dec '10

Hi, I spend about some time (took about a day) trying to improve the current state of windows build and packaging. Partly, I it was to improve my own experience working on Windows (spoiled by MySQL5.5 :) with out-of-source build, partly because I think the fact that the packaging (even zip) requires specially prepared source on Unix or Cygwin (known as bootstrapping in the old MySQL, gone in MySQL-5.5) , is not the way to go forward. It is hard to explain it to our Windows users that Cygwin might is required or recommended, die-hard windows people try to avoid it, and it is known to be broken in recent Windows (Vista +) too... So, the proposed patch would eliminate every Cygwin dependency. Those cmake goodies are not the full 5.5 cmake stuff (nothing Unix related, no improvements for plugins, no improvements to avoid useless recompilation in embedded or in libmysql etc.), but mainly Windows-related packaging plus out-of-source build and test. I have created a repo with my changes on Launchpad https://code.launchpad.net/~maria-captains/maria/5.1-windows-packaging to configure the build (for releases) one would execute % cmake . -DWITH_EMBEDDED_SERVER=1 (all engines that should be compiled in are set to compile in by default, I do not use embedded by default since the build is taking too long with it) To build the ZIP package % devenv mysql.sln /build relwithdebinfo /project package This creates ./mariadb-<major>.<minor>.<patch>-win32.zip To build MSI (assuming Wix 3.0 is installed from http://wix.sourceforge.net/downloadv3.html ) % devenv mysql.sln /build relwithdebinfo % devenv mysql.sln /build relwithdebinfo /project MSI the resulting msi is in win\cmake\ mariadb-<major>.<minor>.<patch>-win32.msi This procedure resembles very closely the official MySQL5.5 release-type builds on Windows ( Jonathan blogged about it some time ago http://www.perkin.org.uk/blog/2010/11/how-to-build-mysql-releases/ ) NSIS is probably broken. Frankly speaking I do not know it at all, neither I believe it would be a good idea to learn, as it will disappear in 5.5 at least. I appreciate comments on the idea. Especially from Philip as QA, and from Kristian as build automator ( should we decide to use this patch, some things will have to change on Buildbot). On the patch itself: - Preventively (to avoid 5.5 merge errors), I created new files in different places from where they live in MySQL 5.5 (e.g. not in cmake/* but in win/cmake/* , not packaging/Wix/* but win/packaging/*). I have done it as bazaar cannot handle situations, where files are "retrospectively" added in old releases. - I also had to fix Maria's mtr for out-of-source build. - When merging with 5.5 most of this stuff (except MTR changes) should disappear, it is already there I can create worklog about this ,and do other procedurally required stuff. I'm not sure in which MariaDB version it should be applied , if we decide to apply it at all. Thanks, Vladislav

1 0

Re: [Maria-developers] a bug that affects group commit implementations
by Kristian Nielsen 08 Dec '10

08 Dec '10

[Cc:ing maria-developers@ as I want us to get into the habbit of discussing more openly, hope that is ok] MARK CALLAGHAN <mdcallag(a)gmail.com> writes: > I think that Mats identified the problem and then Vamsi did a > reproduction of it. > http://bugs.mysql.com/58787 Thanks for pointing me to this issue Mark! I'm wondering what the real bug is here? Can one of you explain? I suppose it is that we can get in binary log eg. INSERT, ALTER; while in InnoDB transaction log we get ALTER, INSERT ? I believe the reason to avoid such inconsistency normally is to allow something like XtraBackup to get a consistent binlog position that can be used to provision a slave. However, for DDL this is not enough, as .frm files are not handled. So ensuring consistent order for DDL between binlog and innodb transaction log does not really solve the problem. The bug also suggests that DDL should use 2-phase commit. But 2-phase commit implies the ability to rollback. I do not know if InnoDB is able to roll back DDL, but MySQL .frm handling certainly is not. So great care would be needed to not just introduce different bugs, if this approach was taken. It is also a non-trivial change of the storage engine API. There has been talk of making DLL in MySQL (/MariaDB) transactional, or at least crash-safe. This is something that I would really like to see. I was told that partitioning already has code for this, by logging .frm changes and recovering / rolling back after crash. Something similar could work for general DDL. This would allow a proper solution to the binlog order problem for DDL. It does not mean that a partial solution now cannot be an improvement, however I do not understand from the bug discussion what such improvement would be. Can you elaborate? BTW, the purpose of 2-phase commit is to ensure consistency between different engines/binlog in case of crash, not to ensure consistent ordering of commits. The fact that it currently _does_ ensure ordering for InnoDB is just a gross hack with the prepare_commit_mutex. This is so expensive (3 x fsync() per commit) that I believe most users don't use it anyway (eg. setting sync_binlog != 1, which defeats the whole purpose of prepare_commit_mutex). I would really recommend looking at MWL#116 (http://askmonty.org/worklog/Server-Sprint/?tid=116) which solves the ordering issue in a proper way. - Kristian.

1 0

Re: [Maria-developers] a mysql-test-run problem
by Kristian Nielsen 07 Dec '10

07 Dec '10

"Vladimir Kolesnikov" <vladimir(a)primebase.org> writes: > I'm trying to reproduce this bug in PBXT: > > https://bugs.launchpad.net/pbxt/+bug/668491 Great! > I use sources from mariadb-5.1.42.tar.gz That's quite an old version, you should use the latest. > I got some problems trying to run maria's test suite. What I want is to run > the pbxt.preload test. I can confirm that PBXT engine is compiled-in. I > tried several ways like > > ./mysql-test-run pbxt.preload > ./mysql-test-run --do-test=pbxt.preload > ./mysql-test-run --start-from=pbxt.preload > > but every of them failed with some kind of init error... Any ideas of a > quick-fix? Using source tarball should work, but I would recommend using the bzr tree. Here is a step-by-step instruction that works for me: bzr branch -rtag:mariadb-5.1.53 lp:maria/5.1 work-5.1-bug66849 cd work-5.1-bug668491/ BUILD/compile-pentium64-valgrind-max (cd mysql-test && ./mtr pbxt.preload) Note, however, that this failure is hard to re-produce. Usually when the test is run, it succeeds. Only occasionally on the heavily loaded buildbot machines does it fail. Here is a search against the database of past failures for this test: http://buildbot.askmonty.org/buildbot/reports/cross_reference#branch=5.1&re… As you can see, the failure is quite rare, only a few failures out of the hundreds of test runs our Buildbot does each day. But according to the bug report, I was able to repeat as follows: (cd mysql-test && for i in `seq 1 1000` ; do ./mtr --parallel=3 pbxt.preload pbxt.preload pbxt.preload || exit 1 ; done) I just tried it, and I was able to reproduce with above loop, however it takes several minutes to see the failure. (I'm using 64-bit Ubuntu 8.04 on a 2.4 GHz Core 2 Duo laptop). Good luck, and let me know if you need more help. - Kristian.

1 0

Re: [Maria-developers] [Branch ~maria-captains/maria/5.1] Rev 2988: Fix LP Bug#686184 - merge_debug test fails.
by Oleksandr Byelkin 07 Dec '10

07 Dec '10

Hi! On 07.12.2010 01:15, noreply(a)launchpad.net wrote: > ------------------------------------------------------------ > revno: 2988 > fixes bug(s): https://launchpad.net/bugs/686184 > committer: Vladislav Vaintroub<wlad(a)montyprogram.com> > branch nick: 5.1 > timestamp: Mon 2010-12-06 22:34:50 +0100 > message: > Fix LP Bug#686184 - merge_debug test fails. > The reason for failure is that DBUG_EXECUTE_IF in mi_open() > only worked for Unix-formatted file names, due to strstr(name, "/crashed") > > The fix change strstr() above to strstr(name, "crashed"), to it can work with > Windows file names as well. > modified: > storage/myisam/mi_open.c (M)Aria engine also has code like you fixed above in ma_open.c: DBUG_EXECUTE_IF("maria_pretend_crashed_table_on_open", if (strstr(name, "/t1")) { my_errno= HA_ERR_CRASHED; goto err; }); Should it be also fixed?

1 0

[Maria-developers] Ready to release MariaDB 5.1.53
by Kristian Nielsen 07 Dec '10

07 Dec '10

Daniel, We are now ready to release MariaDB 5.1.53 and MariaDB 5.2.4. For 5.1.53, the tag is "mariadb-5.1.53" and the tree is: lp:~maria-captains/maria/5.1-release Packages should be downloaded from here: http://knielsen-hq.org/archive/pack/5.1-release/build-660/ For 5.2.4, the tag is "mariadb-5.2.4" and the tree is: lp:maria/5.2 Packages from here: http://knielsen-hq.org/archive/pack/5.2/build-661/ Let me know if you need anything else for the release. - Kristian.

2 2

[Maria-developers] WL#168 New (by Timour): Remove lazy subquery optimization
by worklog-noreply＠askmonty.org 06 Dec '10

06 Dec '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Remove lazy subquery optimization CREATION DATE..: Mon, 06 Dec 2010, 12:55 SUPERVISOR.....: Igor IMPLEMENTOR....: Timour COPIES TO......: CATEGORY.......: Maria-BackLog TASK ID........: 168 (http://askmonty.org/worklog/?tid=168) VERSION........: Server-5.3 STATUS.........: Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 16 (hours remain) ORIG. ESTIMATE.: 16 PROGRESS NOTES: DESCRIPTION: Remove all instances of lazy subquery optimization after MWL#89 is complete. Even after MWL#89, there are certain cases when subquery predicates are executed without prior optimization. This may result in bugs as well as high optimization/explain cost. In addition having a mixed subquery optimization approach results in a more complex architecture and higher degree of coupling between different query processing phases. The goal of this task is to investigate all remaining cases of lazy subquery optimization, and whenever possible change each such case to utilize the general approach of MWL#89. Currently known remaining cases: - sql_select.cc:remove_eq_cond calls cond->const_item() without checking if cond is expensive. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v4.0.0)

1 0

[Maria-developers] WL#167 New (by Sergei): sparse bitmaps
by worklog-noreply＠askmonty.org 30 Nov '10

30 Nov '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: sparse bitmaps CREATION DATE..: Tue, 30 Nov 2010, 11:40 SUPERVISOR.....: IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 167 (http://askmonty.org/worklog/?tid=167) VERSION........: Benchmarks-3.0 STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 20 (hours remain) ORIG. ESTIMATE.: 20 PROGRESS NOTES: DESCRIPTION: implement sparse bitmaps. in mysys, as a generic data structure. preferably with the API compatible to MY_BITMAP. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v4.0.0)

1 0