- developers - lists.mariadb.org

[Maria-developers] Updated (by Sanja): options for CREATE TABLE (43)
by worklog-noreply＠askmonty.org 18 Sep '09

18 Sep '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: options for CREATE TABLE CREATION DATE..: Tue, 11 Aug 2009, 17:02 SUPERVISOR.....: Bothorsen IMPLEMENTOR....: Sanja COPIES TO......: Monty CATEGORY.......: Server-BackLog TASK ID........: 43 (http://askmonty.org/worklog/?tid=43) VERSION........: Server-5.1 STATUS.........: Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 32 (hours remain) ORIG. ESTIMATE.: 32 PROGRESS NOTES: -=-=(Sanja - Fri, 18 Sep 2009, 13:32)=-=- Low Level Design modified. --- /tmp/wklog.43.old.29567 2009-09-18 13:32:41.000000000 +0300 +++ /tmp/wklog.43.new.29567 2009-09-18 13:32:41.000000000 +0300 @@ -1 +1,5 @@ +Options stored in a list as pairs key, value which are LEX_STRING. + +Handler have access to the options during creation and after opening frm. + -=-=(Sanja - Fri, 18 Sep 2009, 13:21)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.29107 2009-09-18 13:21:19.000000000 +0300 +++ /tmp/wklog.43.new.29107 2009-09-18 13:21:19.000000000 +0300 @@ -6,7 +6,8 @@ table_option1=tval1, table_option2=tval2; Exclusion should be made for old table and key options where -'=' was not obligatory. +'=' was not obligatory. Behaviour and way of storage for existing options will +be left as is. Old key options: KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num @@ -42,6 +43,6 @@ For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. - - +Incorrect option during creation/altering table lead only to worning. During +opening unrecognised options should be ignored. -=-=(Guest - Tue, 11 Aug 2009, 19:57)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.31856 2009-08-11 19:57:38.000000000 +0300 +++ /tmp/wklog.43.new.31856 2009-08-11 19:57:38.000000000 +0300 @@ -5,8 +5,43 @@ key key1(field) key_opt1=kval1 key_opt2=kval2) table_option1=tval1, table_option2=tval2; -Exclusion should be made for old table and key (KEY_BLOCK_SIZE) options where +Exclusion should be made for old table and key options where '=' was not obligatory. +Old key options: +KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num +WITH PARSER <name> -> PARSER=name + +Old table options: +ENGINE name -> ENGINE=name +TYPE name -> TYPE=name +MAX_ROWS num -> MAX_ROWS=num +MIX_ROWS num -> MIX_ROWS=num +AVG_ROW_LENGTH num -> AVG_ROW_LENGTH=num +PASSWORD string -> PASSWORD=string +COMMENT string -> COMMENT=string +AUTO_INCREMENT num -> AUTO_INCREMENT=num +PACK_KEYS num/default -> PACK_KEYS=num/default +CHECKSUM num -> CHECKSUM=num +TABLE_CHECKSUM num -> TABLE_CHECKSUM=num +PAGE_CHECKSUM num -> PAGE_CHECKSUM=num +DELAY_KEY_WRITE num -> DELAY_KEY_WRITE=num +ROW_FORMAT name -> ROW_FORMAT=name +INSERT_METHOD name -> INSERT_METHOD=name +KEY_BLOCK_SIZE num -> KEY_BLOCK_SIZE=num +TRANSACTIONAL num -> TRANSACTIONAL=num + +Table options which will be left hardcoded +UNION +default charset +default collation +DATA DIRECTORY +TABLESPACE +STORAGE + For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. + + + + -=-=(Guest - Tue, 11 Aug 2009, 19:36)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.30883 2009-08-11 19:36:45.000000000 +0300 +++ /tmp/wklog.43.new.30883 2009-08-11 19:36:45.000000000 +0300 @@ -1 +1,12 @@ +Table definition ca looks like following +CREATE TABLE table + (field int ... field_opt1=fval1 field_opt2=fval2, + key key1(field) key_opt1=kval1 key_opt2=kval2) + table_option1=tval1, table_option2=tval2; + +Exclusion should be made for old table and key (KEY_BLOCK_SIZE) options where +'=' was not obligatory. + +For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can +be separated from them by '=' sign. DESCRIPTION: Add ability to create table with additional option which can be passed to engine. Also make current options such as TRANSACTIONAL working via this mechanism. HIGH-LEVEL SPECIFICATION: Table definition ca looks like following CREATE TABLE table (field int ... field_opt1=fval1 field_opt2=fval2, key key1(field) key_opt1=kval1 key_opt2=kval2) table_option1=tval1, table_option2=tval2; Exclusion should be made for old table and key options where '=' was not obligatory. Behaviour and way of storage for existing options will be left as is. Old key options: KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num WITH PARSER <name> -> PARSER=name Old table options: ENGINE name -> ENGINE=name TYPE name -> TYPE=name MAX_ROWS num -> MAX_ROWS=num MIX_ROWS num -> MIX_ROWS=num AVG_ROW_LENGTH num -> AVG_ROW_LENGTH=num PASSWORD string -> PASSWORD=string COMMENT string -> COMMENT=string AUTO_INCREMENT num -> AUTO_INCREMENT=num PACK_KEYS num/default -> PACK_KEYS=num/default CHECKSUM num -> CHECKSUM=num TABLE_CHECKSUM num -> TABLE_CHECKSUM=num PAGE_CHECKSUM num -> PAGE_CHECKSUM=num DELAY_KEY_WRITE num -> DELAY_KEY_WRITE=num ROW_FORMAT name -> ROW_FORMAT=name INSERT_METHOD name -> INSERT_METHOD=name KEY_BLOCK_SIZE num -> KEY_BLOCK_SIZE=num TRANSACTIONAL num -> TRANSACTIONAL=num Table options which will be left hardcoded UNION default charset default collation DATA DIRECTORY TABLESPACE STORAGE For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. Incorrect option during creation/altering table lead only to worning. During opening unrecognised options should be ignored. LOW-LEVEL DESIGN: Options stored in a list as pairs key, value which are LEX_STRING. Handler have access to the options during creation and after opening frm. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Sanja): options for CREATE TABLE (43)
by worklog-noreply＠askmonty.org 18 Sep '09

18 Sep '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: options for CREATE TABLE CREATION DATE..: Tue, 11 Aug 2009, 17:02 SUPERVISOR.....: Bothorsen IMPLEMENTOR....: Sanja COPIES TO......: Monty CATEGORY.......: Server-BackLog TASK ID........: 43 (http://askmonty.org/worklog/?tid=43) VERSION........: Server-5.1 STATUS.........: Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 32 (hours remain) ORIG. ESTIMATE.: 32 PROGRESS NOTES: -=-=(Sanja - Fri, 18 Sep 2009, 13:21)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.29107 2009-09-18 13:21:19.000000000 +0300 +++ /tmp/wklog.43.new.29107 2009-09-18 13:21:19.000000000 +0300 @@ -6,7 +6,8 @@ table_option1=tval1, table_option2=tval2; Exclusion should be made for old table and key options where -'=' was not obligatory. +'=' was not obligatory. Behaviour and way of storage for existing options will +be left as is. Old key options: KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num @@ -42,6 +43,6 @@ For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. - - +Incorrect option during creation/altering table lead only to worning. During +opening unrecognised options should be ignored. -=-=(Guest - Tue, 11 Aug 2009, 19:57)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.31856 2009-08-11 19:57:38.000000000 +0300 +++ /tmp/wklog.43.new.31856 2009-08-11 19:57:38.000000000 +0300 @@ -5,8 +5,43 @@ key key1(field) key_opt1=kval1 key_opt2=kval2) table_option1=tval1, table_option2=tval2; -Exclusion should be made for old table and key (KEY_BLOCK_SIZE) options where +Exclusion should be made for old table and key options where '=' was not obligatory. +Old key options: +KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num +WITH PARSER <name> -> PARSER=name + +Old table options: +ENGINE name -> ENGINE=name +TYPE name -> TYPE=name +MAX_ROWS num -> MAX_ROWS=num +MIX_ROWS num -> MIX_ROWS=num +AVG_ROW_LENGTH num -> AVG_ROW_LENGTH=num +PASSWORD string -> PASSWORD=string +COMMENT string -> COMMENT=string +AUTO_INCREMENT num -> AUTO_INCREMENT=num +PACK_KEYS num/default -> PACK_KEYS=num/default +CHECKSUM num -> CHECKSUM=num +TABLE_CHECKSUM num -> TABLE_CHECKSUM=num +PAGE_CHECKSUM num -> PAGE_CHECKSUM=num +DELAY_KEY_WRITE num -> DELAY_KEY_WRITE=num +ROW_FORMAT name -> ROW_FORMAT=name +INSERT_METHOD name -> INSERT_METHOD=name +KEY_BLOCK_SIZE num -> KEY_BLOCK_SIZE=num +TRANSACTIONAL num -> TRANSACTIONAL=num + +Table options which will be left hardcoded +UNION +default charset +default collation +DATA DIRECTORY +TABLESPACE +STORAGE + For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. + + + + -=-=(Guest - Tue, 11 Aug 2009, 19:36)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.30883 2009-08-11 19:36:45.000000000 +0300 +++ /tmp/wklog.43.new.30883 2009-08-11 19:36:45.000000000 +0300 @@ -1 +1,12 @@ +Table definition ca looks like following +CREATE TABLE table + (field int ... field_opt1=fval1 field_opt2=fval2, + key key1(field) key_opt1=kval1 key_opt2=kval2) + table_option1=tval1, table_option2=tval2; + +Exclusion should be made for old table and key (KEY_BLOCK_SIZE) options where +'=' was not obligatory. + +For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can +be separated from them by '=' sign. DESCRIPTION: Add ability to create table with additional option which can be passed to engine. Also make current options such as TRANSACTIONAL working via this mechanism. HIGH-LEVEL SPECIFICATION: Table definition ca looks like following CREATE TABLE table (field int ... field_opt1=fval1 field_opt2=fval2, key key1(field) key_opt1=kval1 key_opt2=kval2) table_option1=tval1, table_option2=tval2; Exclusion should be made for old table and key options where '=' was not obligatory. Behaviour and way of storage for existing options will be left as is. Old key options: KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num WITH PARSER <name> -> PARSER=name Old table options: ENGINE name -> ENGINE=name TYPE name -> TYPE=name MAX_ROWS num -> MAX_ROWS=num MIX_ROWS num -> MIX_ROWS=num AVG_ROW_LENGTH num -> AVG_ROW_LENGTH=num PASSWORD string -> PASSWORD=string COMMENT string -> COMMENT=string AUTO_INCREMENT num -> AUTO_INCREMENT=num PACK_KEYS num/default -> PACK_KEYS=num/default CHECKSUM num -> CHECKSUM=num TABLE_CHECKSUM num -> TABLE_CHECKSUM=num PAGE_CHECKSUM num -> PAGE_CHECKSUM=num DELAY_KEY_WRITE num -> DELAY_KEY_WRITE=num ROW_FORMAT name -> ROW_FORMAT=name INSERT_METHOD name -> INSERT_METHOD=name KEY_BLOCK_SIZE num -> KEY_BLOCK_SIZE=num TRANSACTIONAL num -> TRANSACTIONAL=num Table options which will be left hardcoded UNION default charset default collation DATA DIRECTORY TABLESPACE STORAGE For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. Incorrect option during creation/altering table lead only to worning. During opening unrecognised options should be ignored. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Sanja): options for CREATE TABLE (43)
by worklog-noreply＠askmonty.org 18 Sep '09

18 Sep '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: options for CREATE TABLE CREATION DATE..: Tue, 11 Aug 2009, 17:02 SUPERVISOR.....: Bothorsen IMPLEMENTOR....: Sanja COPIES TO......: Monty CATEGORY.......: Server-BackLog TASK ID........: 43 (http://askmonty.org/worklog/?tid=43) VERSION........: Server-5.1 STATUS.........: Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 32 (hours remain) ORIG. ESTIMATE.: 32 PROGRESS NOTES: -=-=(Sanja - Fri, 18 Sep 2009, 13:21)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.29107 2009-09-18 13:21:19.000000000 +0300 +++ /tmp/wklog.43.new.29107 2009-09-18 13:21:19.000000000 +0300 @@ -6,7 +6,8 @@ table_option1=tval1, table_option2=tval2; Exclusion should be made for old table and key options where -'=' was not obligatory. +'=' was not obligatory. Behaviour and way of storage for existing options will +be left as is. Old key options: KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num @@ -42,6 +43,6 @@ For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. - - +Incorrect option during creation/altering table lead only to worning. During +opening unrecognised options should be ignored. -=-=(Guest - Tue, 11 Aug 2009, 19:57)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.31856 2009-08-11 19:57:38.000000000 +0300 +++ /tmp/wklog.43.new.31856 2009-08-11 19:57:38.000000000 +0300 @@ -5,8 +5,43 @@ key key1(field) key_opt1=kval1 key_opt2=kval2) table_option1=tval1, table_option2=tval2; -Exclusion should be made for old table and key (KEY_BLOCK_SIZE) options where +Exclusion should be made for old table and key options where '=' was not obligatory. +Old key options: +KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num +WITH PARSER <name> -> PARSER=name + +Old table options: +ENGINE name -> ENGINE=name +TYPE name -> TYPE=name +MAX_ROWS num -> MAX_ROWS=num +MIX_ROWS num -> MIX_ROWS=num +AVG_ROW_LENGTH num -> AVG_ROW_LENGTH=num +PASSWORD string -> PASSWORD=string +COMMENT string -> COMMENT=string +AUTO_INCREMENT num -> AUTO_INCREMENT=num +PACK_KEYS num/default -> PACK_KEYS=num/default +CHECKSUM num -> CHECKSUM=num +TABLE_CHECKSUM num -> TABLE_CHECKSUM=num +PAGE_CHECKSUM num -> PAGE_CHECKSUM=num +DELAY_KEY_WRITE num -> DELAY_KEY_WRITE=num +ROW_FORMAT name -> ROW_FORMAT=name +INSERT_METHOD name -> INSERT_METHOD=name +KEY_BLOCK_SIZE num -> KEY_BLOCK_SIZE=num +TRANSACTIONAL num -> TRANSACTIONAL=num + +Table options which will be left hardcoded +UNION +default charset +default collation +DATA DIRECTORY +TABLESPACE +STORAGE + For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. + + + + -=-=(Guest - Tue, 11 Aug 2009, 19:36)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.30883 2009-08-11 19:36:45.000000000 +0300 +++ /tmp/wklog.43.new.30883 2009-08-11 19:36:45.000000000 +0300 @@ -1 +1,12 @@ +Table definition ca looks like following +CREATE TABLE table + (field int ... field_opt1=fval1 field_opt2=fval2, + key key1(field) key_opt1=kval1 key_opt2=kval2) + table_option1=tval1, table_option2=tval2; + +Exclusion should be made for old table and key (KEY_BLOCK_SIZE) options where +'=' was not obligatory. + +For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can +be separated from them by '=' sign. DESCRIPTION: Add ability to create table with additional option which can be passed to engine. Also make current options such as TRANSACTIONAL working via this mechanism. HIGH-LEVEL SPECIFICATION: Table definition ca looks like following CREATE TABLE table (field int ... field_opt1=fval1 field_opt2=fval2, key key1(field) key_opt1=kval1 key_opt2=kval2) table_option1=tval1, table_option2=tval2; Exclusion should be made for old table and key options where '=' was not obligatory. Behaviour and way of storage for existing options will be left as is. Old key options: KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num WITH PARSER <name> -> PARSER=name Old table options: ENGINE name -> ENGINE=name TYPE name -> TYPE=name MAX_ROWS num -> MAX_ROWS=num MIX_ROWS num -> MIX_ROWS=num AVG_ROW_LENGTH num -> AVG_ROW_LENGTH=num PASSWORD string -> PASSWORD=string COMMENT string -> COMMENT=string AUTO_INCREMENT num -> AUTO_INCREMENT=num PACK_KEYS num/default -> PACK_KEYS=num/default CHECKSUM num -> CHECKSUM=num TABLE_CHECKSUM num -> TABLE_CHECKSUM=num PAGE_CHECKSUM num -> PAGE_CHECKSUM=num DELAY_KEY_WRITE num -> DELAY_KEY_WRITE=num ROW_FORMAT name -> ROW_FORMAT=name INSERT_METHOD name -> INSERT_METHOD=name KEY_BLOCK_SIZE num -> KEY_BLOCK_SIZE=num TRANSACTIONAL num -> TRANSACTIONAL=num Table options which will be left hardcoded UNION default charset default collation DATA DIRECTORY TABLESPACE STORAGE For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. Incorrect option during creation/altering table lead only to worning. During opening unrecognised options should be ignored. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Sanja): options for CREATE TABLE (43)
by worklog-noreply＠askmonty.org 18 Sep '09

18 Sep '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: options for CREATE TABLE CREATION DATE..: Tue, 11 Aug 2009, 17:02 SUPERVISOR.....: Bothorsen IMPLEMENTOR....: Sanja COPIES TO......: Monty CATEGORY.......: Server-BackLog TASK ID........: 43 (http://askmonty.org/worklog/?tid=43) VERSION........: Server-5.1 STATUS.........: Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 32 (hours remain) ORIG. ESTIMATE.: 32 PROGRESS NOTES: -=-=(Sanja - Fri, 18 Sep 2009, 13:21)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.29107 2009-09-18 13:21:19.000000000 +0300 +++ /tmp/wklog.43.new.29107 2009-09-18 13:21:19.000000000 +0300 @@ -6,7 +6,8 @@ table_option1=tval1, table_option2=tval2; Exclusion should be made for old table and key options where -'=' was not obligatory. +'=' was not obligatory. Behaviour and way of storage for existing options will +be left as is. Old key options: KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num @@ -42,6 +43,6 @@ For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. - - +Incorrect option during creation/altering table lead only to worning. During +opening unrecognised options should be ignored. -=-=(Guest - Tue, 11 Aug 2009, 19:57)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.31856 2009-08-11 19:57:38.000000000 +0300 +++ /tmp/wklog.43.new.31856 2009-08-11 19:57:38.000000000 +0300 @@ -5,8 +5,43 @@ key key1(field) key_opt1=kval1 key_opt2=kval2) table_option1=tval1, table_option2=tval2; -Exclusion should be made for old table and key (KEY_BLOCK_SIZE) options where +Exclusion should be made for old table and key options where '=' was not obligatory. +Old key options: +KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num +WITH PARSER <name> -> PARSER=name + +Old table options: +ENGINE name -> ENGINE=name +TYPE name -> TYPE=name +MAX_ROWS num -> MAX_ROWS=num +MIX_ROWS num -> MIX_ROWS=num +AVG_ROW_LENGTH num -> AVG_ROW_LENGTH=num +PASSWORD string -> PASSWORD=string +COMMENT string -> COMMENT=string +AUTO_INCREMENT num -> AUTO_INCREMENT=num +PACK_KEYS num/default -> PACK_KEYS=num/default +CHECKSUM num -> CHECKSUM=num +TABLE_CHECKSUM num -> TABLE_CHECKSUM=num +PAGE_CHECKSUM num -> PAGE_CHECKSUM=num +DELAY_KEY_WRITE num -> DELAY_KEY_WRITE=num +ROW_FORMAT name -> ROW_FORMAT=name +INSERT_METHOD name -> INSERT_METHOD=name +KEY_BLOCK_SIZE num -> KEY_BLOCK_SIZE=num +TRANSACTIONAL num -> TRANSACTIONAL=num + +Table options which will be left hardcoded +UNION +default charset +default collation +DATA DIRECTORY +TABLESPACE +STORAGE + For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. + + + + -=-=(Guest - Tue, 11 Aug 2009, 19:36)=-=- High-Level Specification modified. --- /tmp/wklog.43.old.30883 2009-08-11 19:36:45.000000000 +0300 +++ /tmp/wklog.43.new.30883 2009-08-11 19:36:45.000000000 +0300 @@ -1 +1,12 @@ +Table definition ca looks like following +CREATE TABLE table + (field int ... field_opt1=fval1 field_opt2=fval2, + key key1(field) key_opt1=kval1 key_opt2=kval2) + table_option1=tval1, table_option2=tval2; + +Exclusion should be made for old table and key (KEY_BLOCK_SIZE) options where +'=' was not obligatory. + +For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can +be separated from them by '=' sign. DESCRIPTION: Add ability to create table with additional option which can be passed to engine. Also make current options such as TRANSACTIONAL working via this mechanism. HIGH-LEVEL SPECIFICATION: Table definition ca looks like following CREATE TABLE table (field int ... field_opt1=fval1 field_opt2=fval2, key key1(field) key_opt1=kval1 key_opt2=kval2) table_option1=tval1, table_option2=tval2; Exclusion should be made for old table and key options where '=' was not obligatory. Behaviour and way of storage for existing options will be left as is. Old key options: KEY_BLOCK_SIZE <num> -> KEY_BLOCK_SIZE=num WITH PARSER <name> -> PARSER=name Old table options: ENGINE name -> ENGINE=name TYPE name -> TYPE=name MAX_ROWS num -> MAX_ROWS=num MIX_ROWS num -> MIX_ROWS=num AVG_ROW_LENGTH num -> AVG_ROW_LENGTH=num PASSWORD string -> PASSWORD=string COMMENT string -> COMMENT=string AUTO_INCREMENT num -> AUTO_INCREMENT=num PACK_KEYS num/default -> PACK_KEYS=num/default CHECKSUM num -> CHECKSUM=num TABLE_CHECKSUM num -> TABLE_CHECKSUM=num PAGE_CHECKSUM num -> PAGE_CHECKSUM=num DELAY_KEY_WRITE num -> DELAY_KEY_WRITE=num ROW_FORMAT name -> ROW_FORMAT=name INSERT_METHOD name -> INSERT_METHOD=name KEY_BLOCK_SIZE num -> KEY_BLOCK_SIZE=num TRANSACTIONAL num -> TRANSACTIONAL=num Table options which will be left hardcoded UNION default charset default collation DATA DIRECTORY TABLESPACE STORAGE For fields options can go with field attributes (NOT NULL, UNIQUE and so on) can be separated from them by '=' sign. Incorrect option during creation/altering table lead only to worning. During opening unrecognised options should be ignored. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

Re: [Maria-developers] Adding tests to buildbot
by Kristian Nielsen 18 Sep '09

18 Sep '09

Hakan Kuecuekyilmaz <hakan(a)askmonty.org> writes: > Kristian, > > I have now a rough idea on how to run our make distcheck test. > > What I need is a howto about adding tests to buildbot. > > In Pushbuild times, BUILD/compile-dist && make dist was run prior > to all other tests. The machines connected to Pushbuild would pull > the .tar.gz archive to start their tests. I think, we don't really > need that, but we need to test make distcheck is working. Yes, Pushbuild had one job than ran and produced a source .tar.gz from `make dist`. And this was uploaded to most other build slaves as the basis for their builds. The good point about this approach is that it tests the actual sources that we are releasing, and forgettting to add some file to the list of what goes into the source tarball is a very common mistake. It also allows to test that the source can be built without having autotools, bison, etc. installed. The problem with out buildbot setup is that our slaves are too poorly connected network wise. I fear constantly up- and downloading source tarballs would overload internet connections. It could work well for machines on the same LAN as the Buildbot master though. However, we could do something simpler, something like this: BUILD/autorun.sh && make -j4 dist find . -maxdepth 1 \( -name 'mysql-*.tar.gz -prune -o -print0) | xargs -0 rm -Rf gzip -dc mysql-*.tar.gz | tar xf - (cd mysql-* && ./configure <options> && make -j4) (cd mysql-*/mysql-test && perl mysql-test-run.pl <options>) This does not catch if the build process starts depending on autotools or bison, but otherwise should work ok I think. A seperate test would be to just run `make distcheck` and check that it does not fail. This is a somewhat different test, it does not test that the resulting binary works, but it does do some extra checks (like that `make clean` works correctly). So either or both of these would be good to have. I believe Buildbot also has support for one build producing the source tarball with `make dist`, and once this is done triggering other builds to run from this. So if you want to do this it should be possible, but as you say we probably don't really need that at this point. As to a howto: - Find build slaves to run this on. - All of this can be configured just by setting up builders in the Buildbot master config file and adding appropriate buildsteps. - https://internal.askmonty.org/internal/index.php/BuildbotSetup has documentation on the setup and configuration of our Buildbot master. - /etc/buildbot/maria-master.cfg on hasky is the master config file, you can study it to see how the existing setup works. - http://djmitche.github.com/buildbot/docs/0.7.11/ is the Buildbot manual with detailed description of how the config file works. Hopefully that should get you started; feel free to ask any specific questions that may pop up. - Kristian.

1 0

[Maria-developers] Rev 2732: Merge. in file:///Users/hakan/work/monty_program/maria-debug/
by Hakan Kuecuekyilmaz 18 Sep '09

18 Sep '09

At file:///Users/hakan/work/monty_program/maria-debug/ ------------------------------------------------------------ revno: 2732 [merge] revision-id: hakan(a)askmonty.org-20090918033703-3ztdey1rpydiaeds parent: hakan(a)askmonty.org-20090918033054-zi01ib0tg2qt1l7m parent: psergey(a)askmonty.org-20090918011529-3d7glu6ot7n0xqc9 committer: Hakan Kuecuekyilmaz <hakan(a)askmonty.org> branch nick: maria-debug timestamp: Fri 2009-09-18 05:37:03 +0200 message: Merge. modified: mysql-test/lib/mtr_gcov.pl sp1f-mtr_gcov.pl-20041230152646-g7ukx2aojk6vlfbrurijutdkqshwljue mysql-test/lib/process-purecov-annotations.pl processpurecovannota-20090825145959-3tgucpo20ms8b5yb-1 storage/maria/CMakeLists.txt sp1f-cmakelists.txt-20060904145307-qtvi5bxnxyt7nzs4gtpsyte5vv3fwm2i === modified file 'mysql-test/lib/mtr_gcov.pl' --- a/mysql-test/lib/mtr_gcov.pl 2009-08-25 15:02:55 +0000 +++ b/mysql-test/lib/mtr_gcov.pl 2009-09-18 01:15:29 +0000 @@ -64,7 +64,8 @@ $dir_reported= 1; } system("$gcov $f 2>>$start_dir/$gcov_err >>$start_dir/$gcov_msg"); - system("perl $basedir/mysql-test/lib/process-purecov-annotations.pl $f.gcov"); + system("perl", "$basedir/mysql-test/lib/process-purecov-annotations.pl", "$f.gcov"); + } chdir($start_dir); } === modified file 'mysql-test/lib/process-purecov-annotations.pl' --- a/mysql-test/lib/process-purecov-annotations.pl 2009-08-25 15:02:55 +0000 +++ b/mysql-test/lib/process-purecov-annotations.pl 2009-09-18 01:15:29 +0000 @@ -47,7 +47,7 @@ # my @arr= split(/:/, $line); if ($skipping || $line =~ /purecov: *(inspected|deadcode)/ || - $arr[2] =~ m/^{ */) + $arr[2] =~ m/^{ *$/) { # Change '####' to '-'. $arr[0] =~ s/#####/ -/g; @@ -57,8 +57,7 @@ } close(IN); close(OUT); - system("cat $out_file_name > $in_file_name"); - system("rm $out_file_name"); + system("mv", "-f", $out_file_name, $in_file_name); } === modified file 'storage/maria/CMakeLists.txt' --- a/storage/maria/CMakeLists.txt 2008-06-09 09:06:06 +0000 +++ b/storage/maria/CMakeLists.txt 2009-09-09 18:11:31 +0000 @@ -50,6 +50,8 @@ ADD_LIBRARY(maria ${MARIA_SOURCES}) + ADD_DEPENDENCIES(maria GenError) + ADD_EXECUTABLE(maria_ftdump maria_ftdump.c) TARGET_LINK_LIBRARIES(maria_ftdump maria myisam mysys dbug strings zlib wsock32)

1 0

[Maria-developers] Rev 2731: Fix for in file:///Users/hakan/work/monty_program/maria-debug/
by Hakan Kuecuekyilmaz 18 Sep '09

18 Sep '09

At file:///Users/hakan/work/monty_program/maria-debug/ ------------------------------------------------------------ revno: 2731 revision-id: hakan(a)askmonty.org-20090918033054-zi01ib0tg2qt1l7m parent: knielsen(a)knielsen-hq.org-20090907131358-6bq1e3qfcgi30hu8 committer: Hakan Kuecuekyilmaz <hakan(a)askmonty.org> branch nick: maria-debug timestamp: Fri 2009-09-18 05:30:54 +0200 message: Fix for mysqlslap: setting --engine does not get replicated http://bugs.mysql.com/bug.php?id=46967 and mysqlslap: specifying --engine and --create does not work with --engine=<storage_engine>:<option> https://bugs.launchpad.net/maria/+bug/429773 Problems were that an --engine=<storage_engine> was translated to a "set storage_engine = <storage_engine>", wich is _not_ replicated. A --engine=<storage_engine>:<option> was not always properly parsed and in some cases crashed. Fixed by eliminating "set storage_engine = ..." and adding proper DDL generation. Initialized an unitialized buffer to prevent crashes and fixed to use proper pointer for in case of --engine=<storage_engine>:<option> being the last element in list of --engines. Also cleaned up code for better readability. Q: Should MySQL's replication actually replicate a "set storage_engine = ..." command or not? A: No it should not. It is documented here: http://dev.mysql.com/doc/refman/5.1/en/replication-features-variables.html ... "The storage_engine system variable is not replicated, which is a good thing for replication between different storage engines." ... Before the patch, mysqlslap was behaving this way: +-------------------------------+--------+-------------+ | | single | replication | +-------------------------------+--------+-------------+ | Before patch | +-------------------------------+--------+-------------+ | --engine[1] | +-----+-------------------------+--------+-------------+ | 1.1 | eng1 | OK | Not OK | | 1.2 | eng1,eng2 | OK | Not OK | | 1.3 | eng1,eng2,eng3 | OK | Not OK | | 1.4 | memory:option | OK | Not OK | | 1.5 | memory:option,eng1 | OK | Not OK | | 1.6 | eng1,memory:option | Not OK | Not OK | | 1.7 | memory:option,eng1,eng2 | Crash | Not OK | | 1.8 | eng1,memory:option,eng2 | OK | Not OK | | 1.9 | eng1,eng2,memory:option | Not OK | Not OK | +-----+-------------------------+--------+-------------+ +-------------------------------+--------+-------------+ | --create --engine[2] | +-----+-------------------------+--------+-------------+ | 2.1 | eng1 | OK | Not OK | | 2.2 | eng1,eng2 | OK | Not OK | | 2.3 | eng1,eng2,eng3 | OK | Not OK | | 2.4 | memory:option | Not OK | Not OK | | 2.5 | memory:option,eng1 | Not OK | Not OK | | 2.6 | eng1,memory:option | Not OK | Not OK | | 2.7 | memory:option,eng1,eng2 | Crash | Not OK | | 2.8 | eng1,memory:option,eng2 | Not OK | Not OK | | 2.9 | eng1,eng2,memory:option | Not OK | Not OK | +-----+-------------------------+--------+-------------+ After my final patch, mysqlslap now runs like this: +-------------------------------+--------+-------------+ | | single | replication | +-------------------------------+--------+-------------+ | After third patch | +-------------------------------+--------+-------------+ | --engine[1] | +-----+-------------------------+--------+-------------+ | 1.1 | eng1 | OK | OK | | 1.2 | eng1,eng2 | OK | OK | | 1.3 | eng1,eng2,eng3 | OK | OK | | 1.4 | memory:option | OK | OK | | 1.5 | memory:option,eng1 | OK | OK | | 1.6 | eng1,memory:option | OK | OK | | 1.7 | memory:option,eng1,eng2 | OK | OK | | 1.8 | eng1,memory:option,eng2 | OK | OK | | 1.9 | eng1,eng2,memory:option | OK | OK | +-----+-------------------------+--------+-------------+ +-------------------------------+--------+-------------+ | --create --engine[2] | +-----+-------------------------+--------+-------------+ | 2.1 | eng1 | OK | OK | | 2.2 | eng1,eng2 | OK | OK | | 2.3 | eng1,eng2,eng3 | OK | OK | | 2.4 | memory:option | OK | OK | | 2.5 | memory:option,eng1 | OK | OK | | 2.6 | eng1,memory:option | OK | OK | | 2.7 | memory:option,eng1,eng2 | OK | OK | | 2.8 | eng1,memory:option,eng2 | OK | OK | | 2.9 | eng1,eng2,memory:option | OK | OK | +-----+-------------------------+--------+-------------+ === modified file 'client/mysqlslap.c' --- a/client/mysqlslap.c 2009-04-25 10:05:32 +0000 +++ b/client/mysqlslap.c 2009-09-18 03:30:54 +0000 @@ -448,7 +448,16 @@ /* First we create */ if (create_statements) + { + /* + If we have an --engine option, then we indicate + create_schema() to add the engine type to the DDL. + */ + if (eptr) + create_statements->type= CREATE_TABLE_TYPE; + create_schema(mysql, create_schema_string, create_statements, eptr); + } /* If we generated GUID we need to build a list of them from creation that @@ -588,7 +597,9 @@ "Detach (close and reopen) connections after X number of requests.", (uchar**) &detach_rate, (uchar**) &detach_rate, 0, GET_UINT, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, - {"engine", 'e', "Storage engine to use for creating the table.", + {"engine", 'e', "Comma separated list of storage engines to use for creating the table." + "The test is run for each engine. You can also specify an option for an engine" + "after a `:', like memory:max_row=2300", (uchar**) &default_engine, (uchar**) &default_engine, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0}, {"host", 'h', "Connect to host.", (uchar**) &host, (uchar**) &host, 0, GET_STR, @@ -958,6 +969,7 @@ ptr->type= UPDATE_TYPE_REQUIRES_PREFIX ; else ptr->type= UPDATE_TYPE; + strmov(ptr->string, update_string.str); dynstr_free(&update_string); DBUG_RETURN(ptr); @@ -973,8 +985,8 @@ static statement * build_insert_string(void) { - char buf[HUGE_STRING_LENGTH]; - unsigned int col_count; + char buf[HUGE_STRING_LENGTH]; + unsigned int col_count; statement *ptr; DYNAMIC_STRING insert_string; DBUG_ENTER("build_insert_string"); @@ -1064,8 +1076,8 @@ static statement * build_select_string(my_bool key) { - char buf[HUGE_STRING_LENGTH]; - unsigned int col_count; + char buf[HUGE_STRING_LENGTH]; + unsigned int col_count; statement *ptr; static DYNAMIC_STRING query_string; DBUG_ENTER("build_select_string"); @@ -1117,6 +1129,7 @@ ptr->type= SELECT_TYPE_REQUIRES_PREFIX; else ptr->type= SELECT_TYPE; + strmov(ptr->string, query_string.str); dynstr_free(&query_string); DBUG_RETURN(ptr); @@ -1175,8 +1188,6 @@ exit(1); } - - if (auto_generate_sql && num_of_query && auto_actual_queries) { fprintf(stderr, @@ -1217,6 +1228,7 @@ num_int_cols= atoi(str->string); if (str->option) num_int_cols_index= atoi(str->option); + option_cleanup(str); } @@ -1229,6 +1241,7 @@ num_char_cols_index= atoi(str->option); else num_char_cols_index= 0; + option_cleanup(str); } @@ -1463,6 +1476,7 @@ if (tty_password) opt_password= get_tty_password(NullS); + DBUG_RETURN(0); } @@ -1477,6 +1491,7 @@ if (verbose >= 3) printf("%.*s;\n", len, query); + return mysql_real_query(mysql, query, len); } @@ -1592,18 +1607,6 @@ } } - if (engine_stmt) - { - len= snprintf(query, HUGE_STRING_LENGTH, "set storage_engine=`%s`", - engine_stmt->string); - if (run_query(mysql, query, len)) - { - fprintf(stderr,"%s: Cannot set default engine: %s\n", my_progname, - mysql_error(mysql)); - exit(1); - } - } - count= 0; after_create= stmt; @@ -1617,8 +1620,21 @@ { char buffer[HUGE_STRING_LENGTH]; - snprintf(buffer, HUGE_STRING_LENGTH, "%s %s", ptr->string, - engine_stmt->option); + snprintf(buffer, HUGE_STRING_LENGTH, "%s Engine = %s %s", + ptr->string, engine_stmt->string, engine_stmt->option); + if (run_query(mysql, buffer, strlen(buffer))) + { + fprintf(stderr,"%s: Cannot run query %.*s ERROR : %s\n", + my_progname, (uint)ptr->length, ptr->string, mysql_error(mysql)); + exit(1); + } + } + else if (engine_stmt && engine_stmt->string && ptr->type == CREATE_TABLE_TYPE) + { + char buffer[HUGE_STRING_LENGTH]; + + snprintf(buffer, HUGE_STRING_LENGTH, "%s Engine = %s", + ptr->string, engine_stmt->string); if (run_query(mysql, buffer, strlen(buffer))) { fprintf(stderr,"%s: Cannot run query %.*s ERROR : %s\n", @@ -1652,6 +1668,7 @@ { char query[HUGE_STRING_LENGTH]; int len; + DBUG_ENTER("drop_schema"); len= snprintf(query, HUGE_STRING_LENGTH, "DROP SCHEMA IF EXISTS `%s`", db); @@ -1940,17 +1957,27 @@ uint count= 0; /* We know that there is always one */ for (tmp= *sptr= (option_string *)my_malloc(sizeof(option_string), - MYF(MY_ZEROFILL|MY_FAE|MY_WME)); + MYF(MY_ZEROFILL|MY_FAE|MY_WME)); (retstr= strchr(ptr, delm)); tmp->next= (option_string *)my_malloc(sizeof(option_string), - MYF(MY_ZEROFILL|MY_FAE|MY_WME)), + MYF(MY_ZEROFILL|MY_FAE|MY_WME)), tmp= tmp->next) { - char buffer[HUGE_STRING_LENGTH]; + /* + Initialize buffer, because otherwise an + --engine=<storage_engine>:<option>,<eng1>,<eng2> + will crash. + */ + char buffer[HUGE_STRING_LENGTH]= ""; char *buffer_ptr; count++; strncpy(buffer, ptr, (size_t)(retstr - ptr)); + /* + Handle --engine=memory:max_row=200 cases, or more general speaking + --engine=<storage_engine>:<options>, which will be translated to + Engine = storage_engine option. + */ if ((buffer_ptr= strchr(buffer, ':'))) { char *option_ptr; @@ -1971,13 +1998,15 @@ tmp->length= (size_t)(retstr - ptr); } + /* Skip delimiter delm */ ptr+= retstr - ptr + 1; if (isspace(*ptr)) ptr++; + count++; } - if (ptr != origin+length) + if (ptr != origin + length) { char *origin_ptr; @@ -1986,7 +2015,7 @@ char *option_ptr; tmp->length= (size_t)(origin_ptr - ptr); - tmp->string= my_strndup(origin, tmp->length, MYF(MY_FAE)); + tmp->string= my_strndup(ptr, tmp->length, MYF(MY_FAE)); option_ptr= (char *)ptr + 1 + tmp->length; @@ -2036,7 +2065,7 @@ if (ptr != script+length) { tmp->string= my_strndup(ptr, (uint)((script + length) - ptr), - MYF(MY_FAE)); + MYF(MY_FAE)); tmp->length= (size_t)((script + length) - ptr); count++; } @@ -2094,6 +2123,7 @@ { char buffer[HUGE_STRING_LENGTH]; const char *ptr= auto_generate_sql_type ? auto_generate_sql_type : "query"; + snprintf(buffer, HUGE_STRING_LENGTH, "%s,%s,%ld.%03ld,%ld.%03ld,%ld.%03ld,%d,%llu\n", con->engine ? con->engine : "", /* Storage engine we ran against */

1 0

[Maria-developers] [Branch ~maria-captains/maria/5.1] Rev 2732: Gcov support improvements
by noreply＠launchpad.net 18 Sep '09

18 Sep '09

------------------------------------------------------------ revno: 2732 committer: Sergey Petrunya <psergey(a)askmonty.org> branch nick: maria-5.1 timestamp: Fri 2009-09-18 05:15:29 +0400 message: Gcov support improvements - address review feedback (cleaner perl code) modified: mysql-test/lib/mtr_gcov.pl mysql-test/lib/process-purecov-annotations.pl -- lp:maria https://code.launchpad.net/~maria-captains/maria/5.1 Your team Maria developers is subscribed to branch lp:maria. To unsubscribe from this branch go to https://code.launchpad.net/~maria-captains/maria/5.1/+edit-subscription.

1 0

[Maria-developers] Rev 2747: Gcov support improvements in file:///home/psergey/dev/maria-5.1-table-elim-r11-gcov/
by Sergey Petrunya 18 Sep '09

18 Sep '09

At file:///home/psergey/dev/maria-5.1-table-elim-r11-gcov/ ------------------------------------------------------------ revno: 2747 revision-id: psergey(a)askmonty.org-20090825150255-46i5gvl2ctd0jcm2 parent: psergey(a)askmonty.org-20090825145915-rxwmfczgqe69r5ju committer: Sergey Petrunya <psergey(a)askmonty.org> branch nick: maria-5.1-table-elim-r11-gcov timestamp: Tue 2009-08-25 18:02:55 +0300 message: Gcov support improvements - add process-gcov-annotations.pl script that processes .gcov files according to purecov annotations in source code - add --gcov-src-dir=subdir option to mysql-test-run so that one can do gcov processing only for source files in a certain directory. === modified file 'mysql-test/lib/mtr_gcov.pl' --- a/mysql-test/lib/mtr_gcov.pl 2009-04-25 09:04:38 +0000 +++ b/mysql-test/lib/mtr_gcov.pl 2009-08-25 15:02:55 +0000 @@ -20,6 +20,8 @@ use strict; +our $basedir; + sub gcov_prepare ($) { my ($dir)= @_; print "Purging gcov information from '$dir'...\n"; @@ -42,7 +44,7 @@ # Get current directory to return to later. my $start_dir= cwd(); - print "Collecting source coverage info using '$gcov'...\n"; + print "Collecting source coverage info using '$gcov'...$basedir\n"; -f "$start_dir/$gcov_msg" and unlink("$start_dir/$gcov_msg"); -f "$start_dir/$gcov_err" and unlink("$start_dir/$gcov_err"); @@ -62,6 +64,7 @@ $dir_reported= 1; } system("$gcov $f 2>>$start_dir/$gcov_err >>$start_dir/$gcov_msg"); + system("perl $basedir/mysql-test/lib/process-purecov-annotations.pl $f.gcov"); } chdir($start_dir); } === added file 'mysql-test/lib/process-purecov-annotations.pl' --- a/mysql-test/lib/process-purecov-annotations.pl 1970-01-01 00:00:00 +0000 +++ b/mysql-test/lib/process-purecov-annotations.pl 2009-08-25 15:02:55 +0000 @@ -0,0 +1,64 @@ +#!/usr/bin/perl +# -*- cperl -*- + +# This script processes a .gcov coverage report to honor purecov +# annotations: lines marked as inspected or as deadcode are changed +# from looking like lines with code that was never executed to look +# like lines that have no executable code. + +use strict; +use warnings; + +foreach my $in_file_name ( @ARGV ) +{ + my $out_file_name=$in_file_name . ".tmp"; + my $skipping=0; + + open(IN, "<", $in_file_name) || next; + open(OUT, ">", $out_file_name); + while(<IN>) + { + my $line= $_; + my $check= $line; + + # process purecov: start/end multi-blocks + my $started=0; + my $ended= 0; + while (($started=($check =~ s/purecov: *begin *(deadcode|inspected)//)) || + ($ended=($check =~ s/purecov: *end//))) + { + $skipping= $skipping + $started - $ended; + } + if ($skipping < 0) + { + print OUT "WARNING: #####: incorrect order of purecov begin/end annotations\n"; + $skipping= 0; + } + + # Besides purecov annotations, also remove uncovered code mark from cases + # like the following: + # + # -: 211:*/ + # -: 212:class Field_value : public Value_dep + # #####: 213:{ + # -: 214:public: + # + # I have no idea why would gcov think there is uncovered code there + # + my @arr= split(/:/, $line); + if ($skipping || $line =~ /purecov: *(inspected|deadcode)/ || + $arr[2] =~ m/^{ */) + { + # Change '####' to '-'. + $arr[0] =~ s/#####/ -/g; + $line= join(":", @arr); + } + print OUT $line; + } + close(IN); + close(OUT); + system("cat $out_file_name > $in_file_name"); + system("rm $out_file_name"); +} + + === modified file 'mysql-test/mysql-test-run.pl' --- a/mysql-test/mysql-test-run.pl 2009-06-22 08:06:35 +0000 +++ b/mysql-test/mysql-test-run.pl 2009-08-25 15:02:55 +0000 @@ -169,6 +169,7 @@ our $opt_mem= $ENV{'MTR_MEM'}; our $opt_gcov; +our $opt_gcov_src_dir; our $opt_gcov_exe= "gcov"; our $opt_gcov_err= "mysql-test-gcov.msg"; our $opt_gcov_msg= "mysql-test-gcov.err"; @@ -270,7 +271,7 @@ command_line_setup(); if ( $opt_gcov ) { - gcov_prepare($basedir); + gcov_prepare($basedir . "/" . $opt_gcov_src_dir); } if (!$opt_suites) { @@ -416,7 +417,7 @@ mtr_print_line(); if ( $opt_gcov ) { - gcov_collect($basedir, $opt_gcov_exe, + gcov_collect($basedir . "/" . $opt_gcov_src_dir, $opt_gcov_exe, $opt_gcov_msg, $opt_gcov_err); } @@ -882,6 +883,7 @@ # Coverage, profiling etc 'gcov' => \$opt_gcov, + 'gcov-src-dir=s' => \$opt_gcov_src_dir, 'valgrind|valgrind-all' => \$opt_valgrind, 'valgrind-mysqltest' => \$opt_valgrind_mysqltest, 'valgrind-mysqld' => \$opt_valgrind_mysqld, @@ -5397,6 +5399,9 @@ actions. Disable facility with NUM=0. gcov Collect coverage information after the test. The result is a gcov file per source and header file. + gcov-src-dir=subdir Colllect coverage only within the given subdirectory. + For example, if you're only developing the SQL layer, + it makes sense to use --gcov-src-dir=sql HERE exit(1);

2 2

[Maria-developers] Rev 2732: Gcov support improvements in file:///home/psergey/dev/maria-5.1/
by Sergey Petrunya 18 Sep '09

18 Sep '09

At file:///home/psergey/dev/maria-5.1/ ------------------------------------------------------------ revno: 2732 revision-id: psergey(a)askmonty.org-20090918011529-3d7glu6ot7n0xqc9 parent: igor(a)mysql.com-20090909181131-6jb3y48zxnz42zyb committer: Sergey Petrunya <psergey(a)askmonty.org> branch nick: maria-5.1 timestamp: Fri 2009-09-18 05:15:29 +0400 message: Gcov support improvements - address review feedback (cleaner perl code) === modified file 'mysql-test/lib/mtr_gcov.pl' --- a/mysql-test/lib/mtr_gcov.pl 2009-08-25 15:02:55 +0000 +++ b/mysql-test/lib/mtr_gcov.pl 2009-09-18 01:15:29 +0000 @@ -64,7 +64,8 @@ $dir_reported= 1; } system("$gcov $f 2>>$start_dir/$gcov_err >>$start_dir/$gcov_msg"); - system("perl $basedir/mysql-test/lib/process-purecov-annotations.pl $f.gcov"); + system("perl", "$basedir/mysql-test/lib/process-purecov-annotations.pl", "$f.gcov"); + } chdir($start_dir); } === modified file 'mysql-test/lib/process-purecov-annotations.pl' --- a/mysql-test/lib/process-purecov-annotations.pl 2009-08-25 15:02:55 +0000 +++ b/mysql-test/lib/process-purecov-annotations.pl 2009-09-18 01:15:29 +0000 @@ -47,7 +47,7 @@ # my @arr= split(/:/, $line); if ($skipping || $line =~ /purecov: *(inspected|deadcode)/ || - $arr[2] =~ m/^{ */) + $arr[2] =~ m/^{ *$/) { # Change '####' to '-'. $arr[0] =~ s/#####/ -/g; @@ -57,8 +57,7 @@ } close(IN); close(OUT); - system("cat $out_file_name > $in_file_name"); - system("rm $out_file_name"); + system("mv", "-f", $out_file_name, $in_file_name); }

1 0