- developers - lists.mariadb.org

[Maria-developers] Progress (by Bothorsen): Provide an " ORDER BY FIRST_JOIN.column" feature (59)
by worklog-noreply＠askmonty.org 18 Dec '09

18 Dec '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Provide an "ORDER BY FIRST_JOIN.column" feature CREATION DATE..: Thu, 22 Oct 2009, 12:33 SUPERVISOR.....: Bothorsen IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 59 (http://askmonty.org/worklog/?tid=59) VERSION........: WorkLog-3.4 STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 5 ESTIMATE.......: 20 (hours remain) ORIG. ESTIMATE.: 20 PROGRESS NOTES: -=-=(Bothorsen - Fri, 18 Dec 2009, 16:21)=-=- Added the estimation time. Worked 5 hours and estimate 20 hours remain (original estimate increased by 25 hours). DESCRIPTION: Question: How much effort would be required to provide an "ORDER BY FIRST_JOIN.column" feature? We often do self-join queries and want to order them by index, i.e.: create table t1 (a int, b int, unique key 'by_a_b' (a, b))); select * from t1 x inner join t1 y on (x.b = y.b) where x.a=1 and y.a=2 order by (x|y).b desc limit 10; but it is only ordered by index if you order by the first table in the optimized join order, which could be either x or y depending on which is more selective. we don't want to force the join order because often one is far more selective than the other, but the only way to know what table to order by then is to explain the query first. if there was some way to tell mysql to just order by the first join in the optimized order, that would help us. sometimes we do this across tables too. both of these can be solved by rewriting the query to say "using" instead of "on" in which case we don't have to specify the table name of the column, just "order by b desc". but, we also want to be able to do exclusions, in which case an "on" is required and therefore we run into ambiguous column names: Monty answered: MySQL has an optimization where it knows that if x.b = y.b is used then it can replace x.b with y.b and y.b with x.b in the WHERE part MySQL however doesn't do it for the ORDER BY part and I don't think that should be very hard to do. Question continues: create table t2 (c int, b int, unique key 'by_c_b' (c, b))); select * from t1 x inner join t1 y using (b) left join t2 on (t2.c = 3 and t1.b = t2.b) where x.a=1 and y.a=2 and t2.c is null order by (x| y).b desc limit 10; if we were ordering ascending, i think we could just leave off the order by entirely in this case and it would happen to work since it's reading in index order. but the combination of requiring an "on" and descending sort leaves us unable to use these tricks. if we had either an "ORDER BY FIRST_JOIN.column" or some way to tell the server that 'b' is in fact joined as being equivalent across tables (except where it may be null from left joining) and that we shouldn't have to specify the table name at all, that would save us having to figure out the table from the explain. Monty answers: It may be that the eq-replacment we have would solve this. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Progress (by Bothorsen): Store in binlog text of statements that caused RBR events (47)
by worklog-noreply＠askmonty.org 18 Dec '09

18 Dec '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Store in binlog text of statements that caused RBR events CREATION DATE..: Sat, 15 Aug 2009, 23:48 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: Knielsen CATEGORY.......: Server-RawIdeaBin TASK ID........: 47 (http://askmonty.org/worklog/?tid=47) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 15 ESTIMATE.......: 35 (hours remain) ORIG. ESTIMATE.: 35 PROGRESS NOTES: -=-=(Bothorsen - Fri, 18 Dec 2009, 16:16)=-=- This is the work done on this patch so far. Most of it done by Alex. Worked 15 hours and estimate 035 hours remain (original estimate increased by 50 hours). -=-=(Alexi - Fri, 04 Dec 2009, 13:00)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.14001 2009-12-04 13:00:24.000000000 +0200 +++ /tmp/wklog.47.new.14001 2009-12-04 13:00:24.000000000 +0200 @@ -6,27 +6,27 @@ New server option ~~~~~~~~~~~~~~~~~ - --binlog-annotate-row-events + --binlog-annotate-rows-events -Setting this option makes RBR (row-) events in the binary log to be +Setting this option makes RBR (rows-) events in the binary log to be preceded by Annotate rows events (see below). The corresponding -'binlog_annotate_row_events' system variable is dynamic and has both +'binlog_annotate_rows_events' system variable is dynamic and has both global and session values. Default global value is OFF. Note. Session values are usefull to make it possible to annotate only some selected statements: ... - SET SESSION binlog_annotate_row_events=ON; + SET SESSION binlog_annotate_rows_events=ON; ... statements to be annotated ... - SET SESSION binlog_annotate_row_events=OFF; + SET SESSION binlog_annotate_rows_events=OFF; ... statements not to be annotated ... New binlog event type ~~~~~~~~~~~~~~~~~~~~~ Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] -Describes the query which caused the corresponding row event. In binary log, +Describes the query which caused the corresponding rows event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query text in its data part. @@ -79,6 +79,15 @@ 0000012F | 0F 00 00 00 | table_id = 15 ... +New mysqlbinlog option +~~~~~~~~~~~~~~~~~~~~~~ + --print-annotate-rows-events + +With this option, mysqlbinlog prints the content of Annotate-rows +events (if the binary log does contain them). Without this option +(i.e. by default), mysqlbinlog skips Annotate rows events. + + mysqlbinlog output ~~~~~~~~~~~~~~~~~~ Something like this: @@ -109,5 +118,5 @@ 1. Master always sends Annotate_rows events to mysqlbinlog (in remote case). 2. Master sends Annotate_rows events to a slave only if the slave has - both log-slave-updates and binlog-annotate-row-events options set. + both log-slave-updates and binlog-annotate-rows-events options set. -=-=(Alexi - Wed, 02 Dec 2009, 13:32)=-=- Low Level Design modified. --- /tmp/wklog.47.old.17456 2009-12-02 13:32:18.000000000 +0200 +++ /tmp/wklog.47.new.17456 2009-12-02 13:32:18.000000000 +0200 @@ -1,8 +1 @@ -mysql_binlog_send() [sql/sql_repl.cc] -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -1. When sending events to a slave, master should simply skip - Annotate_rows events (they are not needed for replication). - [ ??? Multi-master - currently not clear ] -2. When sending events to mysqlbinlog (remote case), master - must send Annotate_rows events as well. -=-=(Alexi - Wed, 02 Dec 2009, 13:31)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.17414 2009-12-02 11:31:59.000000000 +0000 +++ /tmp/wklog.47.new.17414 2009-12-02 11:31:59.000000000 +0000 @@ -104,3 +104,10 @@ ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ ... +When master sends Annotate rows events +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +1. Master always sends Annotate_rows events to mysqlbinlog (in + remote case). +2. Master sends Annotate_rows events to a slave only if the slave has + both log-slave-updates and binlog-annotate-row-events options set. + -=-=(Knielsen - Mon, 30 Nov 2009, 11:21)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.18210 2009-11-30 11:21:33.000000000 +0200 +++ /tmp/wklog.47.new.18210 2009-11-30 11:21:33.000000000 +0200 @@ -28,7 +28,14 @@ Describes the query which caused the corresponding row event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query -text in its data part. Example: +text in its data part. + +The numeric code for this event must be assigned carefully. It should be +coordinated with MySQL/Sun, otherwise we can get into a situation where MySQL +uses the same numeric code for one event that MariaDB uses for +ANNOTATE_ROWS_EVENT, which would make merging the two impossible. + +Example: ... ************************ -=-=(Alexi - Mon, 30 Nov 2009, 10:33)=-=- Low Level Design modified. --- /tmp/wklog.47.old.16188 2009-11-30 10:33:44.000000000 +0200 +++ /tmp/wklog.47.new.16188 2009-11-30 10:33:44.000000000 +0200 @@ -2,6 +2,7 @@ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. When sending events to a slave, master should simply skip Annotate_rows events (they are not needed for replication). + [ ??? Multi-master - currently not clear ] 2. When sending events to mysqlbinlog (remote case), master must send Annotate_rows events as well. -=-=(Alexi - Sun, 29 Nov 2009, 13:00)=-=- Low Level Design modified. --- /tmp/wklog.47.old.32047 2009-11-29 13:00:21.000000000 +0200 +++ /tmp/wklog.47.new.32047 2009-11-29 13:00:21.000000000 +0200 @@ -1 +1,7 @@ +mysql_binlog_send() [sql/sql_repl.cc] +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +1. When sending events to a slave, master should simply skip + Annotate_rows events (they are not needed for replication). +2. When sending events to mysqlbinlog (remote case), master + must send Annotate_rows events as well. -=-=(Alexi - Sun, 29 Nov 2009, 09:50)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.24993 2009-11-29 07:50:36.000000000 +0000 +++ /tmp/wklog.47.new.24993 2009-11-29 07:50:36.000000000 +0000 @@ -4,3 +4,96 @@ > (Comment_log_event?). Unless we want to log an empty statement Query_log_event > containing only a comment (a bit of a hack). +New server option +~~~~~~~~~~~~~~~~~ + --binlog-annotate-row-events + +Setting this option makes RBR (row-) events in the binary log to be +preceded by Annotate rows events (see below). The corresponding +'binlog_annotate_row_events' system variable is dynamic and has both +global and session values. Default global value is OFF. + +Note. Session values are usefull to make it possible to annotate only + some selected statements: + + ... + SET SESSION binlog_annotate_row_events=ON; + ... statements to be annotated ... + SET SESSION binlog_annotate_row_events=OFF; + ... statements not to be annotated ... + +New binlog event type +~~~~~~~~~~~~~~~~~~~~~ + Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] + +Describes the query which caused the corresponding row event. In binary log, +precedes each Table_map_log_event. Contains empty post-header and the query +text in its data part. Example: + + ... + ************************ + ANNOTATE_ROWS_EVENT [51] + ************************ + 000000C7 | 54 1B 12 4B | time_when = 1259477844 + 000000CB | 33 | event_type = 51 + 000000CC | 64 00 00 00 | server_id = 100 + 000000D0 | 2C 00 00 00 | event_len = 44 + 000000D4 | F3 00 00 00 | log_pos = 000000F3 + 000000D8 | 00 00 | flags = <none> + ------------------------ + 000000DA | 69 6E 73 65 | query = "insert into t1 values (1)" + 000000DE | 72 74 20 69 | + 000000E2 | 6E 74 6F 20 | + 000000E6 | 74 31 20 76 | + 000000EA | 61 6C 75 65 | + 000000EE | 73 20 28 31 | + 000000F2 | 29 | + ************************ + TABLE_MAP_EVENT [19] + ************************ + 000000F3 | 54 1B 12 4B | time_when = 1259477844 + 000000F7 | 13 | event_type = 19 + 000000F8 | 64 00 00 00 | server_id = 100 + 000000FC | 29 00 00 00 | event_len = 41 + 00000100 | 1C 01 00 00 | log_pos = 0000011C + 00000104 | 00 00 | flags = <none> + ------------------------ + ... + ************************ + WRITE_ROWS_EVENT [23] + ************************ + 0000011C | 54 1B 12 4B | time_when = 1259477844 + 00000120 | 17 | event_type = 23 + 00000121 | 64 00 00 00 | server_id = 100 + 00000125 | 22 00 00 00 | event_len = 34 + 00000129 | 3E 01 00 00 | log_pos = 0000013E + 0000012D | 10 00 | flags = LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F + ------------------------ + 0000012F | 0F 00 00 00 | table_id = 15 + ... + +mysqlbinlog output +~~~~~~~~~~~~~~~~~~ +Something like this: + + ... + # at 199 + # at 243 + # at 284 + #091129 9:57:24 server id 100 end_log_pos 243 Query: `insert into t1 values +(1)` + #091129 9:57:24 server id 100 end_log_pos 284 Table_map: `test`.`t1` mapped +to number 15 + #091129 9:57:24 server id 100 end_log_pos 318 Write_rows: table id 15 +flags: STMT_END_F + + BINLOG ' + VBsSSzNkAAAALAAAAPMAAAAAAGluc2VydCBpbnRvIHQxIHZhbHVlcyAoMSk= + VBsSSxNkAAAAKQAAABwBAAAAAA8AAAAAAAAABHRlc3QAAnQxAAEDAAE= + VBsSSxdkAAAAIgAAAD4BAAAQAA8AAAAAAAEAAf/+AQAAAA== + '/*!*/; + ### INSERT INTO test.t1 + ### SET + ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ + ... + -=-=(Knielsen - Fri, 27 Nov 2009, 13:30)=-=- Observers changed: Knielsen -=-=(Psergey - Sun, 16 Aug 2009, 11:08)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.12485 2009-08-16 11:08:33.000000000 +0300 +++ /tmp/wklog.47.new.12485 2009-08-16 11:08:33.000000000 +0300 @@ -1 +1,6 @@ +First suggestion: + +> I think for this we would actually need a new binlog event type +> (Comment_log_event?). Unless we want to log an empty statement Query_log_event +> containing only a comment (a bit of a hack). ------------------------------------------------------------ -=-=(View All Progress Notes, 11 total)=-=- http://askmonty.org/worklog/index.pl?tid=47&nolimit=1 DESCRIPTION: Store in binlog (and show in mysqlbinlog output) texts of statements that caused RBR events This is needed for (list from Monty): - Easier to understand why updates happened - Would make it easier to find out where in application things went wrong (as you can search for exact strings) - Allow one to filter things based on comments in the statement. The cost of this can be that the binlog will be approximately 2x in size (especially insert of big blob's would be a bit painful), so this should be an optional feature. HIGH-LEVEL SPECIFICATION: First suggestion: > I think for this we would actually need a new binlog event type > (Comment_log_event?). Unless we want to log an empty statement Query_log_event > containing only a comment (a bit of a hack). New server option ~~~~~~~~~~~~~~~~~ --binlog-annotate-rows-events Setting this option makes RBR (rows-) events in the binary log to be preceded by Annotate rows events (see below). The corresponding 'binlog_annotate_rows_events' system variable is dynamic and has both global and session values. Default global value is OFF. Note. Session values are usefull to make it possible to annotate only some selected statements: ... SET SESSION binlog_annotate_rows_events=ON; ... statements to be annotated ... SET SESSION binlog_annotate_rows_events=OFF; ... statements not to be annotated ... New binlog event type ~~~~~~~~~~~~~~~~~~~~~ Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] Describes the query which caused the corresponding rows event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query text in its data part. The numeric code for this event must be assigned carefully. It should be coordinated with MySQL/Sun, otherwise we can get into a situation where MySQL uses the same numeric code for one event that MariaDB uses for ANNOTATE_ROWS_EVENT, which would make merging the two impossible. Example: ... ************************ ANNOTATE_ROWS_EVENT [51] ************************ 000000C7 | 54 1B 12 4B | time_when = 1259477844 000000CB | 33 | event_type = 51 000000CC | 64 00 00 00 | server_id = 100 000000D0 | 2C 00 00 00 | event_len = 44 000000D4 | F3 00 00 00 | log_pos = 000000F3 000000D8 | 00 00 | flags = <none> ------------------------ 000000DA | 69 6E 73 65 | query = "insert into t1 values (1)" 000000DE | 72 74 20 69 | 000000E2 | 6E 74 6F 20 | 000000E6 | 74 31 20 76 | 000000EA | 61 6C 75 65 | 000000EE | 73 20 28 31 | 000000F2 | 29 | ************************ TABLE_MAP_EVENT [19] ************************ 000000F3 | 54 1B 12 4B | time_when = 1259477844 000000F7 | 13 | event_type = 19 000000F8 | 64 00 00 00 | server_id = 100 000000FC | 29 00 00 00 | event_len = 41 00000100 | 1C 01 00 00 | log_pos = 0000011C 00000104 | 00 00 | flags = <none> ------------------------ ... ************************ WRITE_ROWS_EVENT [23] ************************ 0000011C | 54 1B 12 4B | time_when = 1259477844 00000120 | 17 | event_type = 23 00000121 | 64 00 00 00 | server_id = 100 00000125 | 22 00 00 00 | event_len = 34 00000129 | 3E 01 00 00 | log_pos = 0000013E 0000012D | 10 00 | flags = LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F ------------------------ 0000012F | 0F 00 00 00 | table_id = 15 ... New mysqlbinlog option ~~~~~~~~~~~~~~~~~~~~~~ --print-annotate-rows-events With this option, mysqlbinlog prints the content of Annotate-rows events (if the binary log does contain them). Without this option (i.e. by default), mysqlbinlog skips Annotate rows events. mysqlbinlog output ~~~~~~~~~~~~~~~~~~ Something like this: ... # at 199 # at 243 # at 284 #091129 9:57:24 server id 100 end_log_pos 243 Query: `insert into t1 values (1)` #091129 9:57:24 server id 100 end_log_pos 284 Table_map: `test`.`t1` mapped to number 15 #091129 9:57:24 server id 100 end_log_pos 318 Write_rows: table id 15 flags: STMT_END_F BINLOG ' VBsSSzNkAAAALAAAAPMAAAAAAGluc2VydCBpbnRvIHQxIHZhbHVlcyAoMSk= VBsSSxNkAAAAKQAAABwBAAAAAA8AAAAAAAAABHRlc3QAAnQxAAEDAAE= VBsSSxdkAAAAIgAAAD4BAAAQAA8AAAAAAAEAAf/+AQAAAA== '/*!*/; ### INSERT INTO test.t1 ### SET ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ ... When master sends Annotate rows events ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. Master always sends Annotate_rows events to mysqlbinlog (in remote case). 2. Master sends Annotate_rows events to a slave only if the slave has both log-slave-updates and binlog-annotate-rows-events options set. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Progress (by Bothorsen): Store in binlog text of statements that caused RBR events (47)
by worklog-noreply＠askmonty.org 18 Dec '09

18 Dec '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Store in binlog text of statements that caused RBR events CREATION DATE..: Sat, 15 Aug 2009, 23:48 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: Knielsen CATEGORY.......: Server-RawIdeaBin TASK ID........: 47 (http://askmonty.org/worklog/?tid=47) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 15 ESTIMATE.......: 35 (hours remain) ORIG. ESTIMATE.: 35 PROGRESS NOTES: -=-=(Bothorsen - Fri, 18 Dec 2009, 16:16)=-=- This is the work done on this patch so far. Most of it done by Alex. Worked 15 hours and estimate 035 hours remain (original estimate increased by 50 hours). -=-=(Alexi - Fri, 04 Dec 2009, 13:00)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.14001 2009-12-04 13:00:24.000000000 +0200 +++ /tmp/wklog.47.new.14001 2009-12-04 13:00:24.000000000 +0200 @@ -6,27 +6,27 @@ New server option ~~~~~~~~~~~~~~~~~ - --binlog-annotate-row-events + --binlog-annotate-rows-events -Setting this option makes RBR (row-) events in the binary log to be +Setting this option makes RBR (rows-) events in the binary log to be preceded by Annotate rows events (see below). The corresponding -'binlog_annotate_row_events' system variable is dynamic and has both +'binlog_annotate_rows_events' system variable is dynamic and has both global and session values. Default global value is OFF. Note. Session values are usefull to make it possible to annotate only some selected statements: ... - SET SESSION binlog_annotate_row_events=ON; + SET SESSION binlog_annotate_rows_events=ON; ... statements to be annotated ... - SET SESSION binlog_annotate_row_events=OFF; + SET SESSION binlog_annotate_rows_events=OFF; ... statements not to be annotated ... New binlog event type ~~~~~~~~~~~~~~~~~~~~~ Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] -Describes the query which caused the corresponding row event. In binary log, +Describes the query which caused the corresponding rows event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query text in its data part. @@ -79,6 +79,15 @@ 0000012F | 0F 00 00 00 | table_id = 15 ... +New mysqlbinlog option +~~~~~~~~~~~~~~~~~~~~~~ + --print-annotate-rows-events + +With this option, mysqlbinlog prints the content of Annotate-rows +events (if the binary log does contain them). Without this option +(i.e. by default), mysqlbinlog skips Annotate rows events. + + mysqlbinlog output ~~~~~~~~~~~~~~~~~~ Something like this: @@ -109,5 +118,5 @@ 1. Master always sends Annotate_rows events to mysqlbinlog (in remote case). 2. Master sends Annotate_rows events to a slave only if the slave has - both log-slave-updates and binlog-annotate-row-events options set. + both log-slave-updates and binlog-annotate-rows-events options set. -=-=(Alexi - Wed, 02 Dec 2009, 13:32)=-=- Low Level Design modified. --- /tmp/wklog.47.old.17456 2009-12-02 13:32:18.000000000 +0200 +++ /tmp/wklog.47.new.17456 2009-12-02 13:32:18.000000000 +0200 @@ -1,8 +1 @@ -mysql_binlog_send() [sql/sql_repl.cc] -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -1. When sending events to a slave, master should simply skip - Annotate_rows events (they are not needed for replication). - [ ??? Multi-master - currently not clear ] -2. When sending events to mysqlbinlog (remote case), master - must send Annotate_rows events as well. -=-=(Alexi - Wed, 02 Dec 2009, 13:31)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.17414 2009-12-02 11:31:59.000000000 +0000 +++ /tmp/wklog.47.new.17414 2009-12-02 11:31:59.000000000 +0000 @@ -104,3 +104,10 @@ ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ ... +When master sends Annotate rows events +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +1. Master always sends Annotate_rows events to mysqlbinlog (in + remote case). +2. Master sends Annotate_rows events to a slave only if the slave has + both log-slave-updates and binlog-annotate-row-events options set. + -=-=(Knielsen - Mon, 30 Nov 2009, 11:21)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.18210 2009-11-30 11:21:33.000000000 +0200 +++ /tmp/wklog.47.new.18210 2009-11-30 11:21:33.000000000 +0200 @@ -28,7 +28,14 @@ Describes the query which caused the corresponding row event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query -text in its data part. Example: +text in its data part. + +The numeric code for this event must be assigned carefully. It should be +coordinated with MySQL/Sun, otherwise we can get into a situation where MySQL +uses the same numeric code for one event that MariaDB uses for +ANNOTATE_ROWS_EVENT, which would make merging the two impossible. + +Example: ... ************************ -=-=(Alexi - Mon, 30 Nov 2009, 10:33)=-=- Low Level Design modified. --- /tmp/wklog.47.old.16188 2009-11-30 10:33:44.000000000 +0200 +++ /tmp/wklog.47.new.16188 2009-11-30 10:33:44.000000000 +0200 @@ -2,6 +2,7 @@ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. When sending events to a slave, master should simply skip Annotate_rows events (they are not needed for replication). + [ ??? Multi-master - currently not clear ] 2. When sending events to mysqlbinlog (remote case), master must send Annotate_rows events as well. -=-=(Alexi - Sun, 29 Nov 2009, 13:00)=-=- Low Level Design modified. --- /tmp/wklog.47.old.32047 2009-11-29 13:00:21.000000000 +0200 +++ /tmp/wklog.47.new.32047 2009-11-29 13:00:21.000000000 +0200 @@ -1 +1,7 @@ +mysql_binlog_send() [sql/sql_repl.cc] +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +1. When sending events to a slave, master should simply skip + Annotate_rows events (they are not needed for replication). +2. When sending events to mysqlbinlog (remote case), master + must send Annotate_rows events as well. -=-=(Alexi - Sun, 29 Nov 2009, 09:50)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.24993 2009-11-29 07:50:36.000000000 +0000 +++ /tmp/wklog.47.new.24993 2009-11-29 07:50:36.000000000 +0000 @@ -4,3 +4,96 @@ > (Comment_log_event?). Unless we want to log an empty statement Query_log_event > containing only a comment (a bit of a hack). +New server option +~~~~~~~~~~~~~~~~~ + --binlog-annotate-row-events + +Setting this option makes RBR (row-) events in the binary log to be +preceded by Annotate rows events (see below). The corresponding +'binlog_annotate_row_events' system variable is dynamic and has both +global and session values. Default global value is OFF. + +Note. Session values are usefull to make it possible to annotate only + some selected statements: + + ... + SET SESSION binlog_annotate_row_events=ON; + ... statements to be annotated ... + SET SESSION binlog_annotate_row_events=OFF; + ... statements not to be annotated ... + +New binlog event type +~~~~~~~~~~~~~~~~~~~~~ + Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] + +Describes the query which caused the corresponding row event. In binary log, +precedes each Table_map_log_event. Contains empty post-header and the query +text in its data part. Example: + + ... + ************************ + ANNOTATE_ROWS_EVENT [51] + ************************ + 000000C7 | 54 1B 12 4B | time_when = 1259477844 + 000000CB | 33 | event_type = 51 + 000000CC | 64 00 00 00 | server_id = 100 + 000000D0 | 2C 00 00 00 | event_len = 44 + 000000D4 | F3 00 00 00 | log_pos = 000000F3 + 000000D8 | 00 00 | flags = <none> + ------------------------ + 000000DA | 69 6E 73 65 | query = "insert into t1 values (1)" + 000000DE | 72 74 20 69 | + 000000E2 | 6E 74 6F 20 | + 000000E6 | 74 31 20 76 | + 000000EA | 61 6C 75 65 | + 000000EE | 73 20 28 31 | + 000000F2 | 29 | + ************************ + TABLE_MAP_EVENT [19] + ************************ + 000000F3 | 54 1B 12 4B | time_when = 1259477844 + 000000F7 | 13 | event_type = 19 + 000000F8 | 64 00 00 00 | server_id = 100 + 000000FC | 29 00 00 00 | event_len = 41 + 00000100 | 1C 01 00 00 | log_pos = 0000011C + 00000104 | 00 00 | flags = <none> + ------------------------ + ... + ************************ + WRITE_ROWS_EVENT [23] + ************************ + 0000011C | 54 1B 12 4B | time_when = 1259477844 + 00000120 | 17 | event_type = 23 + 00000121 | 64 00 00 00 | server_id = 100 + 00000125 | 22 00 00 00 | event_len = 34 + 00000129 | 3E 01 00 00 | log_pos = 0000013E + 0000012D | 10 00 | flags = LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F + ------------------------ + 0000012F | 0F 00 00 00 | table_id = 15 + ... + +mysqlbinlog output +~~~~~~~~~~~~~~~~~~ +Something like this: + + ... + # at 199 + # at 243 + # at 284 + #091129 9:57:24 server id 100 end_log_pos 243 Query: `insert into t1 values +(1)` + #091129 9:57:24 server id 100 end_log_pos 284 Table_map: `test`.`t1` mapped +to number 15 + #091129 9:57:24 server id 100 end_log_pos 318 Write_rows: table id 15 +flags: STMT_END_F + + BINLOG ' + VBsSSzNkAAAALAAAAPMAAAAAAGluc2VydCBpbnRvIHQxIHZhbHVlcyAoMSk= + VBsSSxNkAAAAKQAAABwBAAAAAA8AAAAAAAAABHRlc3QAAnQxAAEDAAE= + VBsSSxdkAAAAIgAAAD4BAAAQAA8AAAAAAAEAAf/+AQAAAA== + '/*!*/; + ### INSERT INTO test.t1 + ### SET + ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ + ... + -=-=(Knielsen - Fri, 27 Nov 2009, 13:30)=-=- Observers changed: Knielsen -=-=(Psergey - Sun, 16 Aug 2009, 11:08)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.12485 2009-08-16 11:08:33.000000000 +0300 +++ /tmp/wklog.47.new.12485 2009-08-16 11:08:33.000000000 +0300 @@ -1 +1,6 @@ +First suggestion: + +> I think for this we would actually need a new binlog event type +> (Comment_log_event?). Unless we want to log an empty statement Query_log_event +> containing only a comment (a bit of a hack). ------------------------------------------------------------ -=-=(View All Progress Notes, 11 total)=-=- http://askmonty.org/worklog/index.pl?tid=47&nolimit=1 DESCRIPTION: Store in binlog (and show in mysqlbinlog output) texts of statements that caused RBR events This is needed for (list from Monty): - Easier to understand why updates happened - Would make it easier to find out where in application things went wrong (as you can search for exact strings) - Allow one to filter things based on comments in the statement. The cost of this can be that the binlog will be approximately 2x in size (especially insert of big blob's would be a bit painful), so this should be an optional feature. HIGH-LEVEL SPECIFICATION: First suggestion: > I think for this we would actually need a new binlog event type > (Comment_log_event?). Unless we want to log an empty statement Query_log_event > containing only a comment (a bit of a hack). New server option ~~~~~~~~~~~~~~~~~ --binlog-annotate-rows-events Setting this option makes RBR (rows-) events in the binary log to be preceded by Annotate rows events (see below). The corresponding 'binlog_annotate_rows_events' system variable is dynamic and has both global and session values. Default global value is OFF. Note. Session values are usefull to make it possible to annotate only some selected statements: ... SET SESSION binlog_annotate_rows_events=ON; ... statements to be annotated ... SET SESSION binlog_annotate_rows_events=OFF; ... statements not to be annotated ... New binlog event type ~~~~~~~~~~~~~~~~~~~~~ Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] Describes the query which caused the corresponding rows event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query text in its data part. The numeric code for this event must be assigned carefully. It should be coordinated with MySQL/Sun, otherwise we can get into a situation where MySQL uses the same numeric code for one event that MariaDB uses for ANNOTATE_ROWS_EVENT, which would make merging the two impossible. Example: ... ************************ ANNOTATE_ROWS_EVENT [51] ************************ 000000C7 | 54 1B 12 4B | time_when = 1259477844 000000CB | 33 | event_type = 51 000000CC | 64 00 00 00 | server_id = 100 000000D0 | 2C 00 00 00 | event_len = 44 000000D4 | F3 00 00 00 | log_pos = 000000F3 000000D8 | 00 00 | flags = <none> ------------------------ 000000DA | 69 6E 73 65 | query = "insert into t1 values (1)" 000000DE | 72 74 20 69 | 000000E2 | 6E 74 6F 20 | 000000E6 | 74 31 20 76 | 000000EA | 61 6C 75 65 | 000000EE | 73 20 28 31 | 000000F2 | 29 | ************************ TABLE_MAP_EVENT [19] ************************ 000000F3 | 54 1B 12 4B | time_when = 1259477844 000000F7 | 13 | event_type = 19 000000F8 | 64 00 00 00 | server_id = 100 000000FC | 29 00 00 00 | event_len = 41 00000100 | 1C 01 00 00 | log_pos = 0000011C 00000104 | 00 00 | flags = <none> ------------------------ ... ************************ WRITE_ROWS_EVENT [23] ************************ 0000011C | 54 1B 12 4B | time_when = 1259477844 00000120 | 17 | event_type = 23 00000121 | 64 00 00 00 | server_id = 100 00000125 | 22 00 00 00 | event_len = 34 00000129 | 3E 01 00 00 | log_pos = 0000013E 0000012D | 10 00 | flags = LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F ------------------------ 0000012F | 0F 00 00 00 | table_id = 15 ... New mysqlbinlog option ~~~~~~~~~~~~~~~~~~~~~~ --print-annotate-rows-events With this option, mysqlbinlog prints the content of Annotate-rows events (if the binary log does contain them). Without this option (i.e. by default), mysqlbinlog skips Annotate rows events. mysqlbinlog output ~~~~~~~~~~~~~~~~~~ Something like this: ... # at 199 # at 243 # at 284 #091129 9:57:24 server id 100 end_log_pos 243 Query: `insert into t1 values (1)` #091129 9:57:24 server id 100 end_log_pos 284 Table_map: `test`.`t1` mapped to number 15 #091129 9:57:24 server id 100 end_log_pos 318 Write_rows: table id 15 flags: STMT_END_F BINLOG ' VBsSSzNkAAAALAAAAPMAAAAAAGluc2VydCBpbnRvIHQxIHZhbHVlcyAoMSk= VBsSSxNkAAAAKQAAABwBAAAAAA8AAAAAAAAABHRlc3QAAnQxAAEDAAE= VBsSSxdkAAAAIgAAAD4BAAAQAA8AAAAAAAEAAf/+AQAAAA== '/*!*/; ### INSERT INTO test.t1 ### SET ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ ... When master sends Annotate rows events ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. Master always sends Annotate_rows events to mysqlbinlog (in remote case). 2. Master sends Annotate_rows events to a slave only if the slave has both log-slave-updates and binlog-annotate-rows-events options set. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Progress (by Bothorsen): Store in binlog text of statements that caused RBR events (47)
by worklog-noreply＠askmonty.org 18 Dec '09

18 Dec '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Store in binlog text of statements that caused RBR events CREATION DATE..: Sat, 15 Aug 2009, 23:48 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: Knielsen CATEGORY.......: Server-RawIdeaBin TASK ID........: 47 (http://askmonty.org/worklog/?tid=47) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 15 ESTIMATE.......: 35 (hours remain) ORIG. ESTIMATE.: 35 PROGRESS NOTES: -=-=(Bothorsen - Fri, 18 Dec 2009, 16:16)=-=- This is the work done on this patch so far. Most of it done by Alex. Worked 15 hours and estimate 035 hours remain (original estimate increased by 50 hours). -=-=(Alexi - Fri, 04 Dec 2009, 13:00)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.14001 2009-12-04 13:00:24.000000000 +0200 +++ /tmp/wklog.47.new.14001 2009-12-04 13:00:24.000000000 +0200 @@ -6,27 +6,27 @@ New server option ~~~~~~~~~~~~~~~~~ - --binlog-annotate-row-events + --binlog-annotate-rows-events -Setting this option makes RBR (row-) events in the binary log to be +Setting this option makes RBR (rows-) events in the binary log to be preceded by Annotate rows events (see below). The corresponding -'binlog_annotate_row_events' system variable is dynamic and has both +'binlog_annotate_rows_events' system variable is dynamic and has both global and session values. Default global value is OFF. Note. Session values are usefull to make it possible to annotate only some selected statements: ... - SET SESSION binlog_annotate_row_events=ON; + SET SESSION binlog_annotate_rows_events=ON; ... statements to be annotated ... - SET SESSION binlog_annotate_row_events=OFF; + SET SESSION binlog_annotate_rows_events=OFF; ... statements not to be annotated ... New binlog event type ~~~~~~~~~~~~~~~~~~~~~ Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] -Describes the query which caused the corresponding row event. In binary log, +Describes the query which caused the corresponding rows event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query text in its data part. @@ -79,6 +79,15 @@ 0000012F | 0F 00 00 00 | table_id = 15 ... +New mysqlbinlog option +~~~~~~~~~~~~~~~~~~~~~~ + --print-annotate-rows-events + +With this option, mysqlbinlog prints the content of Annotate-rows +events (if the binary log does contain them). Without this option +(i.e. by default), mysqlbinlog skips Annotate rows events. + + mysqlbinlog output ~~~~~~~~~~~~~~~~~~ Something like this: @@ -109,5 +118,5 @@ 1. Master always sends Annotate_rows events to mysqlbinlog (in remote case). 2. Master sends Annotate_rows events to a slave only if the slave has - both log-slave-updates and binlog-annotate-row-events options set. + both log-slave-updates and binlog-annotate-rows-events options set. -=-=(Alexi - Wed, 02 Dec 2009, 13:32)=-=- Low Level Design modified. --- /tmp/wklog.47.old.17456 2009-12-02 13:32:18.000000000 +0200 +++ /tmp/wklog.47.new.17456 2009-12-02 13:32:18.000000000 +0200 @@ -1,8 +1 @@ -mysql_binlog_send() [sql/sql_repl.cc] -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -1. When sending events to a slave, master should simply skip - Annotate_rows events (they are not needed for replication). - [ ??? Multi-master - currently not clear ] -2. When sending events to mysqlbinlog (remote case), master - must send Annotate_rows events as well. -=-=(Alexi - Wed, 02 Dec 2009, 13:31)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.17414 2009-12-02 11:31:59.000000000 +0000 +++ /tmp/wklog.47.new.17414 2009-12-02 11:31:59.000000000 +0000 @@ -104,3 +104,10 @@ ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ ... +When master sends Annotate rows events +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +1. Master always sends Annotate_rows events to mysqlbinlog (in + remote case). +2. Master sends Annotate_rows events to a slave only if the slave has + both log-slave-updates and binlog-annotate-row-events options set. + -=-=(Knielsen - Mon, 30 Nov 2009, 11:21)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.18210 2009-11-30 11:21:33.000000000 +0200 +++ /tmp/wklog.47.new.18210 2009-11-30 11:21:33.000000000 +0200 @@ -28,7 +28,14 @@ Describes the query which caused the corresponding row event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query -text in its data part. Example: +text in its data part. + +The numeric code for this event must be assigned carefully. It should be +coordinated with MySQL/Sun, otherwise we can get into a situation where MySQL +uses the same numeric code for one event that MariaDB uses for +ANNOTATE_ROWS_EVENT, which would make merging the two impossible. + +Example: ... ************************ -=-=(Alexi - Mon, 30 Nov 2009, 10:33)=-=- Low Level Design modified. --- /tmp/wklog.47.old.16188 2009-11-30 10:33:44.000000000 +0200 +++ /tmp/wklog.47.new.16188 2009-11-30 10:33:44.000000000 +0200 @@ -2,6 +2,7 @@ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. When sending events to a slave, master should simply skip Annotate_rows events (they are not needed for replication). + [ ??? Multi-master - currently not clear ] 2. When sending events to mysqlbinlog (remote case), master must send Annotate_rows events as well. -=-=(Alexi - Sun, 29 Nov 2009, 13:00)=-=- Low Level Design modified. --- /tmp/wklog.47.old.32047 2009-11-29 13:00:21.000000000 +0200 +++ /tmp/wklog.47.new.32047 2009-11-29 13:00:21.000000000 +0200 @@ -1 +1,7 @@ +mysql_binlog_send() [sql/sql_repl.cc] +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +1. When sending events to a slave, master should simply skip + Annotate_rows events (they are not needed for replication). +2. When sending events to mysqlbinlog (remote case), master + must send Annotate_rows events as well. -=-=(Alexi - Sun, 29 Nov 2009, 09:50)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.24993 2009-11-29 07:50:36.000000000 +0000 +++ /tmp/wklog.47.new.24993 2009-11-29 07:50:36.000000000 +0000 @@ -4,3 +4,96 @@ > (Comment_log_event?). Unless we want to log an empty statement Query_log_event > containing only a comment (a bit of a hack). +New server option +~~~~~~~~~~~~~~~~~ + --binlog-annotate-row-events + +Setting this option makes RBR (row-) events in the binary log to be +preceded by Annotate rows events (see below). The corresponding +'binlog_annotate_row_events' system variable is dynamic and has both +global and session values. Default global value is OFF. + +Note. Session values are usefull to make it possible to annotate only + some selected statements: + + ... + SET SESSION binlog_annotate_row_events=ON; + ... statements to be annotated ... + SET SESSION binlog_annotate_row_events=OFF; + ... statements not to be annotated ... + +New binlog event type +~~~~~~~~~~~~~~~~~~~~~ + Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] + +Describes the query which caused the corresponding row event. In binary log, +precedes each Table_map_log_event. Contains empty post-header and the query +text in its data part. Example: + + ... + ************************ + ANNOTATE_ROWS_EVENT [51] + ************************ + 000000C7 | 54 1B 12 4B | time_when = 1259477844 + 000000CB | 33 | event_type = 51 + 000000CC | 64 00 00 00 | server_id = 100 + 000000D0 | 2C 00 00 00 | event_len = 44 + 000000D4 | F3 00 00 00 | log_pos = 000000F3 + 000000D8 | 00 00 | flags = <none> + ------------------------ + 000000DA | 69 6E 73 65 | query = "insert into t1 values (1)" + 000000DE | 72 74 20 69 | + 000000E2 | 6E 74 6F 20 | + 000000E6 | 74 31 20 76 | + 000000EA | 61 6C 75 65 | + 000000EE | 73 20 28 31 | + 000000F2 | 29 | + ************************ + TABLE_MAP_EVENT [19] + ************************ + 000000F3 | 54 1B 12 4B | time_when = 1259477844 + 000000F7 | 13 | event_type = 19 + 000000F8 | 64 00 00 00 | server_id = 100 + 000000FC | 29 00 00 00 | event_len = 41 + 00000100 | 1C 01 00 00 | log_pos = 0000011C + 00000104 | 00 00 | flags = <none> + ------------------------ + ... + ************************ + WRITE_ROWS_EVENT [23] + ************************ + 0000011C | 54 1B 12 4B | time_when = 1259477844 + 00000120 | 17 | event_type = 23 + 00000121 | 64 00 00 00 | server_id = 100 + 00000125 | 22 00 00 00 | event_len = 34 + 00000129 | 3E 01 00 00 | log_pos = 0000013E + 0000012D | 10 00 | flags = LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F + ------------------------ + 0000012F | 0F 00 00 00 | table_id = 15 + ... + +mysqlbinlog output +~~~~~~~~~~~~~~~~~~ +Something like this: + + ... + # at 199 + # at 243 + # at 284 + #091129 9:57:24 server id 100 end_log_pos 243 Query: `insert into t1 values +(1)` + #091129 9:57:24 server id 100 end_log_pos 284 Table_map: `test`.`t1` mapped +to number 15 + #091129 9:57:24 server id 100 end_log_pos 318 Write_rows: table id 15 +flags: STMT_END_F + + BINLOG ' + VBsSSzNkAAAALAAAAPMAAAAAAGluc2VydCBpbnRvIHQxIHZhbHVlcyAoMSk= + VBsSSxNkAAAAKQAAABwBAAAAAA8AAAAAAAAABHRlc3QAAnQxAAEDAAE= + VBsSSxdkAAAAIgAAAD4BAAAQAA8AAAAAAAEAAf/+AQAAAA== + '/*!*/; + ### INSERT INTO test.t1 + ### SET + ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ + ... + -=-=(Knielsen - Fri, 27 Nov 2009, 13:30)=-=- Observers changed: Knielsen -=-=(Psergey - Sun, 16 Aug 2009, 11:08)=-=- High-Level Specification modified. --- /tmp/wklog.47.old.12485 2009-08-16 11:08:33.000000000 +0300 +++ /tmp/wklog.47.new.12485 2009-08-16 11:08:33.000000000 +0300 @@ -1 +1,6 @@ +First suggestion: + +> I think for this we would actually need a new binlog event type +> (Comment_log_event?). Unless we want to log an empty statement Query_log_event +> containing only a comment (a bit of a hack). ------------------------------------------------------------ -=-=(View All Progress Notes, 11 total)=-=- http://askmonty.org/worklog/index.pl?tid=47&nolimit=1 DESCRIPTION: Store in binlog (and show in mysqlbinlog output) texts of statements that caused RBR events This is needed for (list from Monty): - Easier to understand why updates happened - Would make it easier to find out where in application things went wrong (as you can search for exact strings) - Allow one to filter things based on comments in the statement. The cost of this can be that the binlog will be approximately 2x in size (especially insert of big blob's would be a bit painful), so this should be an optional feature. HIGH-LEVEL SPECIFICATION: First suggestion: > I think for this we would actually need a new binlog event type > (Comment_log_event?). Unless we want to log an empty statement Query_log_event > containing only a comment (a bit of a hack). New server option ~~~~~~~~~~~~~~~~~ --binlog-annotate-rows-events Setting this option makes RBR (rows-) events in the binary log to be preceded by Annotate rows events (see below). The corresponding 'binlog_annotate_rows_events' system variable is dynamic and has both global and session values. Default global value is OFF. Note. Session values are usefull to make it possible to annotate only some selected statements: ... SET SESSION binlog_annotate_rows_events=ON; ... statements to be annotated ... SET SESSION binlog_annotate_rows_events=OFF; ... statements not to be annotated ... New binlog event type ~~~~~~~~~~~~~~~~~~~~~ Annotate_rows_log_event [ ANNOTATE_ROWS_EVENT ] Describes the query which caused the corresponding rows event. In binary log, precedes each Table_map_log_event. Contains empty post-header and the query text in its data part. The numeric code for this event must be assigned carefully. It should be coordinated with MySQL/Sun, otherwise we can get into a situation where MySQL uses the same numeric code for one event that MariaDB uses for ANNOTATE_ROWS_EVENT, which would make merging the two impossible. Example: ... ************************ ANNOTATE_ROWS_EVENT [51] ************************ 000000C7 | 54 1B 12 4B | time_when = 1259477844 000000CB | 33 | event_type = 51 000000CC | 64 00 00 00 | server_id = 100 000000D0 | 2C 00 00 00 | event_len = 44 000000D4 | F3 00 00 00 | log_pos = 000000F3 000000D8 | 00 00 | flags = <none> ------------------------ 000000DA | 69 6E 73 65 | query = "insert into t1 values (1)" 000000DE | 72 74 20 69 | 000000E2 | 6E 74 6F 20 | 000000E6 | 74 31 20 76 | 000000EA | 61 6C 75 65 | 000000EE | 73 20 28 31 | 000000F2 | 29 | ************************ TABLE_MAP_EVENT [19] ************************ 000000F3 | 54 1B 12 4B | time_when = 1259477844 000000F7 | 13 | event_type = 19 000000F8 | 64 00 00 00 | server_id = 100 000000FC | 29 00 00 00 | event_len = 41 00000100 | 1C 01 00 00 | log_pos = 0000011C 00000104 | 00 00 | flags = <none> ------------------------ ... ************************ WRITE_ROWS_EVENT [23] ************************ 0000011C | 54 1B 12 4B | time_when = 1259477844 00000120 | 17 | event_type = 23 00000121 | 64 00 00 00 | server_id = 100 00000125 | 22 00 00 00 | event_len = 34 00000129 | 3E 01 00 00 | log_pos = 0000013E 0000012D | 10 00 | flags = LOG_EVENT_UPDATE_TABLE_MAP_VERSION_F ------------------------ 0000012F | 0F 00 00 00 | table_id = 15 ... New mysqlbinlog option ~~~~~~~~~~~~~~~~~~~~~~ --print-annotate-rows-events With this option, mysqlbinlog prints the content of Annotate-rows events (if the binary log does contain them). Without this option (i.e. by default), mysqlbinlog skips Annotate rows events. mysqlbinlog output ~~~~~~~~~~~~~~~~~~ Something like this: ... # at 199 # at 243 # at 284 #091129 9:57:24 server id 100 end_log_pos 243 Query: `insert into t1 values (1)` #091129 9:57:24 server id 100 end_log_pos 284 Table_map: `test`.`t1` mapped to number 15 #091129 9:57:24 server id 100 end_log_pos 318 Write_rows: table id 15 flags: STMT_END_F BINLOG ' VBsSSzNkAAAALAAAAPMAAAAAAGluc2VydCBpbnRvIHQxIHZhbHVlcyAoMSk= VBsSSxNkAAAAKQAAABwBAAAAAA8AAAAAAAAABHRlc3QAAnQxAAEDAAE= VBsSSxdkAAAAIgAAAD4BAAAQAA8AAAAAAAEAAf/+AQAAAA== '/*!*/; ### INSERT INTO test.t1 ### SET ### @1=1 /* INT meta=0 nullable=1 is_null=0 */ ... When master sends Annotate rows events ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. Master always sends Annotate_rows events to mysqlbinlog (in remote case). 2. Master sends Annotate_rows events to a slave only if the slave has both log-slave-updates and binlog-annotate-rows-events options set. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

Re: [Maria-developers] bzr repository
by Kristian Nielsen 18 Dec '09

18 Dec '09

Hakan Kuecuekyilmaz <hakan(a)askmonty.org> writes: > I would like to put the scripts to a bzr repository. I guess launchpad > is a good place. A separate repository makes sense to me, or maybe add > them to the MariaDB sources? Yes. I have for some time known we need a public repository with the tools we use for MariaDB development. So now I have created a project for this on Launchpad. Branch to push to: lp:mariadb-tools Project page: https://launchpad.net/mariadb-tools Wiki page: http://askmonty.org/wiki/index.php/Tools_for_MariaDB Everybody, please help by moving things from our internal bzr repo hasky:/usr/local/bzr into this project where relevant. And also please help by updating the wiki page with appropriate documentation. > I have a first working version of the wrapper scripts to automatically > run sql-bench with a set of different configurations. >From this description, it sounds like something that would make sense to include in the MariaDB source tree? If so, I guess just commit them and get a review. Generally, it is an advantage to keep tools that work on a specific version of MariaDB inside the source tree, especially for automation (like Buildbot). Eg. if different variants of the scripts are needed for different MariaDB versions (maybe using a feature that is not present in older versions); keeping the scripts inside the tree trivially ensures that the versions of scripts and of MariaDB matches. It also removes any issues wiht making sure the scripts are available on a given host. On the other hand, if the script needs to work with different versions of MariaDB it probably makes sense to keep it outside of the main source tree. Maybe the script needs to check out the MariaDB source tree (like package scripts); it cannot easily checkout itself... Or maybe it needs to compare two different versions of MariaDB against each other (benchmarks, upgrade testing). For some tools the correct approach would be that part is inside the source tree and part outside. - Kristian.

1 0

[Maria-developers] Rev 2738: DS-MRR backport: in file:///home/psergey/dev/maria-5.2-dsmrr/
by Sergey Petrunya 16 Dec '09

16 Dec '09

At file:///home/psergey/dev/maria-5.2-dsmrr/ ------------------------------------------------------------ revno: 2738 revision-id: psergey(a)askmonty.org-20091216092851-9ehou85ydmgziniy parent: psergey(a)askmonty.org-20091215223739-f6xymmvanylqlrg9 committer: Sergey Petrunya <psergey(a)askmonty.org> branch nick: maria-5.2-dsmrr timestamp: Wed 2009-12-16 12:28:51 +0300 message: DS-MRR backport: - Fix PBXT test results (PBXT doesn't support MRR or ICP, but we get result diffs because we've also backported a fix that - prints out "Using where" when the table has part of WHERE that it has got from LEFT JOIN's ON expression - Does a better job at removing equalities that are guaranteed to be true by use of ref acccess. === modified file 'mysql-test/suite/pbxt/r/join_outer.result' --- a/mysql-test/suite/pbxt/r/join_outer.result 2009-04-02 10:03:14 +0000 +++ b/mysql-test/suite/pbxt/r/join_outer.result 2009-12-16 09:28:51 +0000 @@ -630,7 +630,7 @@ explain select * from t2 left join t1 on t1.fooID = t2.fooID and t1.fooID = 30; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t2 index NULL PRIMARY 4 NULL 3 Using index -1 SIMPLE t1 const PRIMARY PRIMARY 2 const 1 Using index +1 SIMPLE t1 const PRIMARY PRIMARY 2 const 1 Using where; Using index select * from t2 left join t1 on t1.fooID = t2.fooID and t1.fooID = 30; fooID barID fooID 10 1 NULL @@ -688,8 +688,8 @@ explain select * from t1 left join t2 on b1 = a1 left join t3 on c1 = a1 and b1 is null; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 ALL NULL NULL NULL NULL 3 -1 SIMPLE t2 ALL NULL NULL NULL NULL 2 -1 SIMPLE t3 ALL NULL NULL NULL NULL 2 +1 SIMPLE t2 ALL NULL NULL NULL NULL 2 Using where +1 SIMPLE t3 ALL NULL NULL NULL NULL 2 Using where drop table t1, t2, t3; create table t1 ( a int(11), @@ -859,14 +859,14 @@ EXPLAIN SELECT * FROM t1 LEFT JOIN t2 ON a1=0; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 index NULL PRIMARY 4 NULL 1 Using index -1 SIMPLE t2 ALL NULL NULL NULL NULL 2 +1 SIMPLE t2 ALL NULL NULL NULL NULL 2 Using where SELECT * FROM t1 LEFT JOIN (t2,t3) ON a1=0; a1 a2 a3 1 NULL NULL EXPLAIN SELECT * FROM t1 LEFT JOIN (t2,t3) ON a1=0; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 index NULL PRIMARY 4 NULL 1 Using index -1 SIMPLE t2 ALL NULL NULL NULL NULL 2 +1 SIMPLE t2 ALL NULL NULL NULL NULL 2 Using where 1 SIMPLE t3 ALL NULL NULL NULL NULL 2 SELECT * FROM t0, t1 LEFT JOIN (t2,t3) ON a1=0 WHERE a0=a1; a0 a1 a2 a3 @@ -875,7 +875,7 @@ id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t0 index PRIMARY PRIMARY 4 NULL 1 Using index 1 SIMPLE t1 eq_ref PRIMARY PRIMARY 4 test.t0.a0 1 Using index -1 SIMPLE t2 ALL NULL NULL NULL NULL 2 +1 SIMPLE t2 ALL NULL NULL NULL NULL 2 Using where 1 SIMPLE t3 ALL NULL NULL NULL NULL 2 INSERT INTO t0 VALUES (0); INSERT INTO t1 VALUES (0); === modified file 'mysql-test/suite/pbxt/r/order_by.result' --- a/mysql-test/suite/pbxt/r/order_by.result 2009-04-02 10:03:14 +0000 +++ b/mysql-test/suite/pbxt/r/order_by.result 2009-12-16 09:28:51 +0000 @@ -514,7 +514,7 @@ EXPLAIN SELECT t1.gid, t3.uid from t1, t3 where t1.skr = t3.uid order by t1.gid,t3.skr; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 ALL NULL NULL NULL NULL 6 Using temporary; Using filesort -1 SIMPLE t3 eq_ref PRIMARY PRIMARY 2 test.t1.skr 1 Using where +1 SIMPLE t3 eq_ref PRIMARY PRIMARY 2 test.t1.skr 1 Using index condition drop table t1,t2,t3; CREATE TABLE t1 ( `titre` char(80) NOT NULL default '', @@ -638,7 +638,7 @@ insert into t1 values (2, 1), (1, 1), (4, NULL), (3, NULL), (6, 2), (5, 2); explain select * from t1 where b=1 or b is null order by a; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref_or_null b b 5 const 2 Using where; Using filesort +1 SIMPLE t1 ref_or_null b b 5 const 2 Using filesort select * from t1 where b=1 or b is null order by a; a b 1 1 @@ -647,7 +647,7 @@ 4 NULL explain select * from t1 where b=2 or b is null order by a; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref_or_null b b 5 const 2 Using where; Using filesort +1 SIMPLE t1 ref_or_null b b 5 const 2 Using filesort select * from t1 where b=2 or b is null order by a; a b 3 NULL @@ -897,7 +897,7 @@ ORDER BY c; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 ALL NULL NULL NULL NULL 3 Using temporary; Using filesort -1 SIMPLE t2 const PRIMARY PRIMARY 4 const 1 +1 SIMPLE t2 const PRIMARY PRIMARY 4 const 1 Using where SELECT t2.b as c FROM t1 LEFT JOIN t1 t2 ON (t1.a = t2.a AND t2.a = 2) ORDER BY c; === modified file 'mysql-test/suite/pbxt/r/partition_pruning.result' --- a/mysql-test/suite/pbxt/r/partition_pruning.result 2009-08-17 15:57:58 +0000 +++ b/mysql-test/suite/pbxt/r/partition_pruning.result 2009-12-16 09:28:51 +0000 @@ -533,15 +533,15 @@ test.t2 analyze status OK explain partitions select * from t2 where b = 4; id select_type table partitions type possible_keys key key_len ref rows Extra -1 SIMPLE t2 p0,p1,p2,p3,p4 ref b b 5 const 5 Using where +1 SIMPLE t2 p0,p1,p2,p3,p4 ref b b 5 const 5 explain extended select * from t2 where b = 6; id select_type table type possible_keys key key_len ref rows filtered Extra -1 SIMPLE t2 ref b b 5 const 5 100.00 Using where +1 SIMPLE t2 ref b b 5 const 5 100.00 Warnings: Note 1003 select `test`.`t2`.`a` AS `a`,`test`.`t2`.`b` AS `b` from `test`.`t2` where (`test`.`t2`.`b` = 6) explain partitions select * from t2 where b = 6; id select_type table partitions type possible_keys key key_len ref rows Extra -1 SIMPLE t2 p0,p1,p2,p3,p4 ref b b 5 const 5 Using where +1 SIMPLE t2 p0,p1,p2,p3,p4 ref b b 5 const 5 explain extended select * from t2 where b in (1,3,5); id select_type table type possible_keys key key_len ref rows filtered Extra 1 SIMPLE t2 range b b 5 NULL 15 100.00 Using where === modified file 'mysql-test/suite/pbxt/r/ps_1general.result' --- a/mysql-test/suite/pbxt/r/ps_1general.result 2009-08-31 11:07:44 +0000 +++ b/mysql-test/suite/pbxt/r/ps_1general.result 2009-12-16 09:28:51 +0000 @@ -465,9 +465,9 @@ def key_len 253 4096 1 Y 0 31 8 def ref 253 2048 0 Y 0 31 8 def rows 8 10 1 Y 32928 0 63 -def Extra 253 255 27 N 1 31 8 +def Extra 253 255 48 N 1 31 8 id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 range PRIMARY PRIMARY 4 NULL 3 Using where; Using filesort +1 SIMPLE t1 range PRIMARY PRIMARY 4 NULL 3 Using index condition; Using MRR; Using filesort drop table if exists t2; create table t2 (id smallint, name varchar(20)) ; prepare stmt1 from ' insert into t2 values(?, ?) ' ; === modified file 'mysql-test/suite/pbxt/r/range.result' --- a/mysql-test/suite/pbxt/r/range.result 2009-08-17 15:57:58 +0000 +++ b/mysql-test/suite/pbxt/r/range.result 2009-12-16 09:28:51 +0000 @@ -221,31 +221,31 @@ update t1 set y=x; explain select * from t1, t1 t2 where t1.y = 8 and t2.x between 7 and t1.y+0; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref y y 5 const 1 Using where +1 SIMPLE t1 ref y y 5 const 1 1 SIMPLE t2 range x x 5 NULL 1 Using where; Using join buffer explain select * from t1, t1 t2 where t1.y = 8 and t2.x >= 7 and t2.x <= t1.y+0; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref y y 5 const 1 Using where +1 SIMPLE t1 ref y y 5 const 1 1 SIMPLE t2 range x x 5 NULL 1 Using where; Using join buffer explain select * from t1, t1 t2 where t1.y = 2 and t2.x between t1.y-1 and t1.y+1; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref y y 5 const 1 Using where +1 SIMPLE t1 ref y y 5 const 1 1 SIMPLE t2 range x x 5 NULL 1 Using where; Using join buffer explain select * from t1, t1 t2 where t1.y = 2 and t2.x >= t1.y-1 and t2.x <= t1.y+1; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref y y 5 const 1 Using where +1 SIMPLE t1 ref y y 5 const 1 1 SIMPLE t2 range x x 5 NULL 1 Using where; Using join buffer explain select * from t1, t1 t2 where t1.y = 2 and t2.x between 0 and t1.y; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref y y 5 const 1 Using where +1 SIMPLE t1 ref y y 5 const 1 1 SIMPLE t2 range x x 5 NULL 1 Using where; Using join buffer explain select * from t1, t1 t2 where t1.y = 2 and t2.x >= 0 and t2.x <= t1.y; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref y y 5 const 1 Using where +1 SIMPLE t1 ref y y 5 const 1 1 SIMPLE t2 range x x 5 NULL 1 Using where; Using join buffer explain select count(*) from t1 where x in (1); id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref x x 5 const 1 Using where; Using index +1 SIMPLE t1 ref x x 5 const 1 Using index explain select count(*) from t1 where x in (1,2); id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 index x x 5 NULL 9 Using where; Using index @@ -277,7 +277,7 @@ (33,5),(33,5),(33,5),(33,5),(34,5),(35,5); EXPLAIN SELECT * FROM t1 WHERE a IN(1,2) AND b=5; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 range a,b a 5 NULL 2 Using where +1 SIMPLE t1 range a,b a 5 NULL 2 Using index condition; Using where; Using MRR SELECT * FROM t1 WHERE a IN(1,2) AND b=5; a b DROP TABLE t1; @@ -920,7 +920,7 @@ ('A2','2005-12-01 08:00:00',1000); EXPLAIN SELECT * FROM t1 WHERE item='A1' AND started<='2005-12-01 24:00:00'; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref PRIMARY PRIMARY 20 const 2 Using where +1 SIMPLE t1 ref PRIMARY PRIMARY 20 const 2 Using index condition Warnings: Warning 1292 Incorrect datetime value: '2005-12-01 24:00:00' for column 'started' at row 1 Warning 1292 Incorrect datetime value: '2005-12-01 24:00:00' for column 'started' at row 1 === modified file 'mysql-test/suite/pbxt/r/select.result' --- a/mysql-test/suite/pbxt/r/select.result 2009-10-07 16:56:11 +0000 +++ b/mysql-test/suite/pbxt/r/select.result 2009-12-16 09:28:51 +0000 @@ -1397,15 +1397,15 @@ explain select companynr,companyname from t4 left join t2 using (companynr) where companynr > 0; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t4 ALL PRIMARY NULL NULL NULL 12 Using where -1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 +1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 Using where explain select companynr,companyname from t4 left join t2 using (companynr) where companynr > 0 or companynr < 0; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t4 ALL PRIMARY NULL NULL NULL 12 Using where -1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 +1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 Using where explain select companynr,companyname from t4 left join t2 using (companynr) where companynr > 0 and companynr > 0; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t4 ALL PRIMARY NULL NULL NULL 12 Using where -1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 +1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 Using where explain select t2.companynr,companyname from t4 left join t2 using (companynr) where t2.companynr > 0 or t2.companynr is null; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t4 ALL NULL NULL NULL NULL 12 @@ -1421,15 +1421,15 @@ explain select companynr,companyname from t4 left join t2 using (companynr) where companynr > 0 or companynr is null; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t4 ALL PRIMARY NULL NULL NULL 12 Using where -1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 +1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 Using where explain select companynr,companyname from t4 left join t2 using (companynr) where companynr > 0 or companynr < 0 or companynr > 0; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t4 ALL PRIMARY NULL NULL NULL 12 Using where -1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 +1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 Using where explain select companynr,companyname from t4 left join t2 using (companynr) where ifnull(companynr,1)>0; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t4 ALL NULL NULL NULL NULL 12 Using where -1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 +1 SIMPLE t2 ALL NULL NULL NULL NULL 1199 Using where select distinct t2.companynr,t4.companynr from t2,t4 where t2.companynr=t4.companynr+1; companynr companynr 37 36 @@ -2368,16 +2368,16 @@ insert into t2 values (1,3), (2,3), (3,4), (4,4); explain select * from t1 left join t2 on a=c where d in (4); id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t2 ref c,d d 5 const 1 Using where -1 SIMPLE t1 ref a a 5 test.t2.c 1 Using where +1 SIMPLE t2 ref c,d d 5 const 1 +1 SIMPLE t1 ref a a 5 test.t2.c 1 select * from t1 left join t2 on a=c where d in (4); a b c d 3 2 3 4 4 2 4 4 explain select * from t1 left join t2 on a=c where d = 4; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t2 ref c,d d 5 const 1 Using where -1 SIMPLE t1 ref a a 5 test.t2.c 1 Using where +1 SIMPLE t2 ref c,d d 5 const 1 +1 SIMPLE t1 ref a a 5 test.t2.c 1 select * from t1 left join t2 on a=c where d = 4; a b c d 3 2 3 4 @@ -2403,11 +2403,11 @@ EXPLAIN SELECT * FROM t1 LEFT JOIN t2 USE INDEX (a) ON t1.a=t2.a; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 ALL NULL NULL NULL NULL 5 -1 SIMPLE t2 ref a a 23 test.t1.a 1 +1 SIMPLE t2 ref a a 23 test.t1.a 1 Using where EXPLAIN SELECT * FROM t1 LEFT JOIN t2 FORCE INDEX (a) ON t1.a=t2.a; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 ALL NULL NULL NULL NULL 5 -1 SIMPLE t2 ref a a 23 test.t1.a 1 +1 SIMPLE t2 ref a a 23 test.t1.a 1 Using where DROP TABLE t1, t2; CREATE TABLE t1 ( city char(30) ); INSERT INTO t1 VALUES ('London'); @@ -2722,7 +2722,7 @@ where (t1.c=t2.a or (t1.c=t3.a and t2.a=t3.b)) and t1.b=556476786 and t2.b like '%%' order by t2.b limit 0,1; id select_type table type possible_keys key key_len ref rows Extra -1 SIMPLE t1 ref b,c b 5 const 1 Using where; Using temporary; Using filesort +1 SIMPLE t1 ref b,c b 5 const 1 Using temporary; Using filesort 1 SIMPLE t3 index PRIMARY,a,b PRIMARY 8 NULL 2 Using index; Using join buffer 1 SIMPLE t2 ALL PRIMARY NULL NULL NULL 2 Range checked for each record (index map: 0x1) DROP TABLE t1,t2,t3; @@ -3468,12 +3468,12 @@ SELECT a, c, d, f FROM t1,t2 WHERE a=c AND b BETWEEN 4 AND 6; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 range PRIMARY,b b 5 NULL 1 Using where -1 SIMPLE t2 ref c c 5 test.t1.a 1 Using where +1 SIMPLE t2 ref c c 5 test.t1.a 1 EXPLAIN SELECT a, c, d, f FROM t1,t2 WHERE a=c AND b BETWEEN 4 AND 6 AND a > 0; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 range PRIMARY,b PRIMARY 4 NULL 1 Using where -1 SIMPLE t2 ref c c 5 test.t1.a 1 Using where +1 SIMPLE t2 ref c c 5 test.t1.a 1 DROP TABLE t1, t2; create table t1 ( a int unsigned not null auto_increment primary key, @@ -3533,7 +3533,7 @@ id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 const PRIMARY PRIMARY 4 const 1 1 SIMPLE t2 const idx1 NULL NULL NULL 1 -1 SIMPLE t3 ref idx1 idx1 5 const 1 Using where +1 SIMPLE t3 ref idx1 idx1 5 const 1 SELECT * FROM t1 LEFT JOIN t2 ON t2.b=t1.a INNER JOIN t3 ON t3.d=t1.id WHERE t1.id=2; id a b c d e === modified file 'mysql-test/suite/pbxt/r/select_safe.result' --- a/mysql-test/suite/pbxt/r/select_safe.result 2009-08-17 15:57:58 +0000 +++ b/mysql-test/suite/pbxt/r/select_safe.result 2009-12-16 09:28:51 +0000 @@ -70,12 +70,12 @@ explain select STRAIGHT_JOIN * from t1,t1 as t2 where t1.b=t2.b; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 ALL b NULL NULL NULL 21 -1 SIMPLE t2 ref b b 21 test.t1.b 1 Using where +1 SIMPLE t2 ref b b 21 test.t1.b 1 set MAX_SEEKS_FOR_KEY=1; explain select STRAIGHT_JOIN * from t1,t1 as t2 where t1.b=t2.b; id select_type table type possible_keys key key_len ref rows Extra 1 SIMPLE t1 ALL b NULL NULL NULL 21 -1 SIMPLE t2 ref b b 21 test.t1.b 1 Using where +1 SIMPLE t2 ref b b 21 test.t1.b 1 SET MAX_SEEKS_FOR_KEY=DEFAULT; drop table t1; create table t1 (a int); === modified file 'mysql-test/suite/pbxt/r/subselect.result' --- a/mysql-test/suite/pbxt/r/subselect.result 2009-10-16 12:45:42 +0000 +++ b/mysql-test/suite/pbxt/r/subselect.result 2009-12-16 09:28:51 +0000 @@ -719,7 +719,7 @@ 1 EXPLAIN EXTENDED SELECT * FROM t2 WHERE id IN (SELECT 1); id select_type table type possible_keys key key_len ref rows filtered Extra -1 PRIMARY t2 ref id id 5 const 1 100.00 Using where; Using index +1 PRIMARY t2 ref id id 5 const 1 100.00 Using index Warnings: Note 1249 Select 2 was reduced during optimization Note 1003 select `test`.`t2`.`id` AS `id` from `test`.`t2` where (`test`.`t2`.`id` = 1) @@ -731,7 +731,7 @@ 2 EXPLAIN EXTENDED SELECT * FROM t2 WHERE id IN (SELECT 1+(select 1)); id select_type table type possible_keys key key_len ref rows filtered Extra -1 PRIMARY t2 ref id id 5 const 1 100.00 Using where; Using index +1 PRIMARY t2 ref id id 5 const 1 100.00 Using index Warnings: Note 1249 Select 3 was reduced during optimization Note 1249 Select 2 was reduced during optimization @@ -903,7 +903,7 @@ explain extended SELECT t1.a, t1.a in (select t2.a from t2,t3 where t3.a=t2.a) FROM t1; id select_type table type possible_keys key key_len ref rows filtered Extra 1 PRIMARY t1 index NULL PRIMARY 4 NULL 4 100.00 Using index -2 DEPENDENT SUBQUERY t2 ref_or_null a a 5 func 2 100.00 Using where; Using index +2 DEPENDENT SUBQUERY t2 ref_or_null a a 5 func 2 100.00 Using index 2 DEPENDENT SUBQUERY t3 ALL NULL NULL NULL NULL 3 100.00 Using where; Using join buffer Warnings: Note 1003 select `test`.`t1`.`a` AS `a`,<in_optimizer>(`test`.`t1`.`a`,<exists>(select 1 AS `Not_used` from `test`.`t2` join `test`.`t3` where ((`test`.`t3`.`a` = `test`.`t2`.`a`) and ((<cache>(`test`.`t1`.`a`) = `test`.`t2`.`a`) or isnull(`test`.`t2`.`a`))) having <is_not_null_test>(`test`.`t2`.`a`))) AS `t1.a in (select t2.a from t2,t3 where t3.a=t2.a)` from `test`.`t1` @@ -1333,9 +1333,9 @@ explain extended select * from t2 where t2.a in (select a from t1); id select_type table type possible_keys key key_len ref rows filtered Extra 1 PRIMARY t2 index NULL a 5 NULL 4 100.00 Using where; Using index -2 DEPENDENT SUBQUERY t1 index_subquery a a 5 func 1 100.00 Using index; Using where +2 DEPENDENT SUBQUERY t1 index_subquery a a 5 func 1 100.00 Using index Warnings: -Note 1003 select `test`.`t2`.`a` AS `a` from `test`.`t2` where <in_optimizer>(`test`.`t2`.`a`,<exists>(<index_lookup>(<cache>(`test`.`t2`.`a`) in t1 on a where (<cache>(`test`.`t2`.`a`) = `test`.`t1`.`a`)))) +Note 1003 select `test`.`t2`.`a` AS `a` from `test`.`t2` where <in_optimizer>(`test`.`t2`.`a`,<exists>(<index_lookup>(<cache>(`test`.`t2`.`a`) in t1 on a))) select * from t2 where t2.a in (select a from t1 where t1.b <> 30); a 2 @@ -1353,8 +1353,8 @@ explain extended select * from t2 where t2.a in (select t1.a from t1,t3 where t1.b=t3.a); id select_type table type possible_keys key key_len ref rows filtered Extra 1 PRIMARY t2 index NULL a 5 NULL 4 100.00 Using where; Using index -2 DEPENDENT SUBQUERY t1 ref a a 5 func 1 100.00 Using where; Using index -2 DEPENDENT SUBQUERY t3 ref a a 5 test.t1.b 1 100.00 Using where; Using index +2 DEPENDENT SUBQUERY t1 ref a a 5 func 1 100.00 Using index +2 DEPENDENT SUBQUERY t3 ref a a 5 test.t1.b 1 100.00 Using index Warnings: Note 1003 select `test`.`t2`.`a` AS `a` from `test`.`t2` where <in_optimizer>(`test`.`t2`.`a`,<exists>(select 1 AS `Not_used` from `test`.`t1` join `test`.`t3` where ((`test`.`t3`.`a` = `test`.`t1`.`b`) and (<cache>(`test`.`t2`.`a`) = `test`.`t1`.`a`)))) insert into t1 values (3,31); === modified file 'mysql-test/suite/pbxt/r/union.result' --- a/mysql-test/suite/pbxt/r/union.result 2009-10-07 16:56:11 +0000 +++ b/mysql-test/suite/pbxt/r/union.result 2009-12-16 09:28:51 +0000 @@ -505,7 +505,7 @@ explain (select * from t1 where a=1) union (select * from t1 where b=1); id select_type table type possible_keys key key_len ref rows Extra 1 PRIMARY t1 const PRIMARY PRIMARY 4 const 1 -2 UNION t1 ref b b 5 const 1 Using where +2 UNION t1 ref b b 5 const 1 NULL UNION RESULT <union1,2> ALL NULL NULL NULL NULL NULL drop table t1,t2; create table t1 ( id int not null auto_increment, primary key (id) ,user_name text );

1 0

[Maria-developers] bzr commit into MariaDB 5.1, with Maria 1.5:maria branch (knielsen:2777)
by knielsen＠knielsen-hq.org 16 Dec '09

16 Dec '09

#At lp:maria 2777 knielsen(a)knielsen-hq.org 2009-12-16 [merge] Automatic merge with MariaDB trunk. modified: BUILD/FINISH.sh BUILD/SETUP.sh client/mysql.cc client/mysqlcheck.c client/mysqlslap.c client/mysqltest.cc dbug/dbug.c extra/yassl/taocrypt/include/block.hpp mysql-test/lib/mtr_cases.pm mysql-test/lib/mtr_report.pm mysql-test/lib/v1/mysql-test-run.pl mysql-test/mysql-test-run.pl mysql-test/r/ctype_ucs.result mysql-test/r/warnings.result mysql-test/suite/federated/disabled.def mysql-test/suite/federated/federated_server.result mysql-test/suite/federated/federated_server.test mysql-test/suite/funcs_1/r/innodb_func_view.result mysql-test/suite/funcs_1/r/memory_func_view.result mysql-test/suite/funcs_1/r/myisam_func_view.result mysql-test/t/ctype_ucs.test mysql-test/t/warnings.test plugin/fulltext/plugin_example.c sql-common/client.c sql/my_decimal.cc sql/mysqld.cc sql/share/errmsg.txt sql/slave.cc sql/sql_base.cc sql/sql_class.cc sql/sql_insert.cc storage/federatedx/ha_federatedx.cc strings/ctype-ucs2.c unittest/mysys/Makefile.am vio/viosslfactories.c === modified file 'BUILD/FINISH.sh' --- a/BUILD/FINISH.sh 2009-10-27 13:20:34 +0000 +++ b/BUILD/FINISH.sh 2009-12-06 17:34:54 +0000 @@ -1,6 +1,6 @@ -cflags="$c_warnings $extra_flags" -cxxflags="$cxx_warnings $base_cxxflags $extra_flags" -extra_configs="$extra_configs $local_infile_configs" +cflags="$c_warnings $extra_flags $EXTRA_FLAGS $EXTRA_CFLAGS" +cxxflags="$cxx_warnings $base_cxxflags $extra_flags $EXTRA_FLAGS $EXTRA_CXXFLAGS" +extra_configs="$extra_configs $local_infile_configs $EXTRA_CONFIGS" configure="./configure $base_configs $extra_configs" commands="\ === modified file 'BUILD/SETUP.sh' --- a/BUILD/SETUP.sh 2009-10-29 00:04:56 +0000 +++ b/BUILD/SETUP.sh 2009-12-06 17:34:54 +0000 @@ -34,6 +34,14 @@ parse_options() full_debug="=full";; --warning-mode=*) warning_mode=`get_key_value "$1"`;; + --extra-flags=*) + EXTRA_FLAGS=`get_key_value "$1"`;; + --extra-cflags=*) + EXTRA_CFLAGS=`get_key_value "$1"`;; + --extra-cxxflags=*) + EXTRA_CXXFLAGS=`get_key_value "$1"`;; + --extra-configs=*) + EXTRA_CONFIGS=`get_key_value "$1"`;; -c | --just-configure) just_configure=1;; -n | --just-print | --print) === modified file 'client/mysql.cc' --- a/client/mysql.cc 2009-11-30 21:37:27 +0000 +++ b/client/mysql.cc 2009-12-03 11:34:11 +0000 @@ -1280,7 +1280,6 @@ sig_handler handle_sigint(int sig) MYSQL *kill_mysql= NULL; /* terminate if no query being executed, or we already tried interrupting */ - /* terminate if no query being executed, or we already tried interrupting */ if (!executing_query || (interrupted_query == 2)) { tee_fprintf(stdout, "Ctrl-C -- exit!\n"); @@ -1295,6 +1294,7 @@ sig_handler handle_sigint(int sig) goto err; } + /* First time try to kill the query, second time the connection */ interrupted_query++; /* mysqld < 5 does not understand KILL QUERY, skip to KILL CONNECTION */ @@ -1305,10 +1305,13 @@ sig_handler handle_sigint(int sig) sprintf(kill_buffer, "KILL %s%lu", (interrupted_query == 1) ? "QUERY " : "", mysql_thread_id(&mysql)); - tee_fprintf(stdout, "Ctrl-C -- sending \"%s\" to server ...\n", kill_buffer); + if (verbose) + tee_fprintf(stdout, "Ctrl-C -- sending \"%s\" to server ...\n", + kill_buffer); mysql_real_query(kill_mysql, kill_buffer, (uint) strlen(kill_buffer)); mysql_close(kill_mysql); - tee_fprintf(stdout, "Ctrl-C -- query aborted.\n"); + tee_fprintf(stdout, "Ctrl-C -- query killed. Continuing normally.\n"); + interrupted_query= 0; return; @@ -1321,7 +1324,6 @@ err: handler called mysql_end(). */ mysql_thread_end(); - return; #else mysql_end(sig); #endif @@ -2881,13 +2883,8 @@ com_help(String *buffer __attribute__((u return com_server_help(buffer,line,help_arg); } - put_info("\nFor information about MySQL products and services, visit:\n" - " http://www.mysql.com/\n" - "For developer information, including the MySQL Reference Manual, " - "visit:\n" - " http://dev.mysql.com/\n" - "To buy MySQL Enterprise support, training, or other products, visit:\n" - " https://shop.mysql.com/\n", INFO_INFO); + put_info("\nGeneral information about MariaDB can be found at\n" + "http://askmonty.org/wiki/index.php/Manual:Contents\n", INFO_INFO); put_info("List of all MySQL commands:", INFO_INFO); if (!named_cmds) put_info("Note that all text commands must be first on line and end with ';'",INFO_INFO); === modified file 'client/mysqlcheck.c' --- a/client/mysqlcheck.c 2009-09-28 06:24:19 +0000 +++ b/client/mysqlcheck.c 2009-12-03 11:19:05 +0000 @@ -857,7 +857,8 @@ int main(int argc, char **argv) if (!opt_write_binlog) { - if (disable_binlog()) { + if (disable_binlog()) + { first_error= 1; goto end; } === modified file 'client/mysqlslap.c' --- a/client/mysqlslap.c 2009-11-30 21:37:27 +0000 +++ b/client/mysqlslap.c 2009-12-03 11:34:11 +0000 @@ -472,11 +472,10 @@ void concurrency_loop(MYSQL *mysql, uint if (commit_rate) run_query(mysql, "SET AUTOCOMMIT=0", strlen("SET AUTOCOMMIT=0")); - if (pre_system) - if ((sysret= system(pre_system)) != 0) - fprintf(stderr, - "Warning: Execution of pre_system option returned %d.\n", - sysret); + if (pre_system && (sysret= system(pre_system)) != 0) + fprintf(stderr, + "Warning: Execution of pre_system option returned %d.\n", + sysret); /* Pre statements are always run after all other logic so they can @@ -490,11 +489,10 @@ void concurrency_loop(MYSQL *mysql, uint if (post_statements) run_statements(mysql, post_statements); - if (post_system) - if ((sysret= system(post_system)) != 0) - fprintf(stderr, - "Warning: Execution of post_system option returned %d.\n", - sysret); + if (post_system && (sysret= system(post_system)) != 0) + fprintf(stderr, + "Warning: Execution of post_system option returned %d.\n", + sysret); /* We are finished with this run */ if (auto_generate_sql_autoincrement || auto_generate_sql_guid_primary) drop_primary_key_list(); === modified file 'client/mysqltest.cc' --- a/client/mysqltest.cc 2009-11-16 20:49:51 +0000 +++ b/client/mysqltest.cc 2009-12-03 11:19:05 +0000 @@ -3497,9 +3497,10 @@ void do_diff_files(struct st_command *co if ((error= compare_files(ds_filename.str, ds_filename2.str)) && match_expected_error(command, error, NULL) < 0) { - /* Compare of the two files failed, append them to output - so the failure can be analyzed, but only if it was not - expected to fail. + /* + Compare of the two files failed, append them to output + so the failure can be analyzed, but only if it was not + expected to fail. */ show_diff(&ds_res, ds_filename.str, ds_filename2.str); log_file.write(&ds_res); @@ -5013,7 +5014,8 @@ void do_connect(struct st_command *comma con_options= ds_options.str; while (*con_options) { - char* end; + size_t length; + char *end; /* Step past any spaces in beginning of option*/ while (*con_options && my_isspace(charset_info, *con_options)) con_options++; @@ -5021,13 +5023,14 @@ void do_connect(struct st_command *comma end= con_options; while (*end && !my_isspace(charset_info, *end)) end++; - if (!strncmp(con_options, "SSL", 3)) + length= (size_t) (end - con_options); + if (length == 3 && !strncmp(con_options, "SSL", 3)) con_ssl= 1; - else if (!strncmp(con_options, "COMPRESS", 8)) + else if (length == 8 && !strncmp(con_options, "COMPRESS", 8)) con_compress= 1; - else if (!strncmp(con_options, "PIPE", 4)) + else if (length == 4 && !strncmp(con_options, "PIPE", 4)) con_pipe= 1; - else if (!strncmp(con_options, "SHM", 3)) + else if (length == 3 && !strncmp(con_options, "SHM", 3)) con_shm= 1; else die("Illegal option to connect: %.*s", @@ -5096,14 +5099,13 @@ void do_connect(struct st_command *comma mysql_options(&con_slot->mysql, MYSQL_SHARED_MEMORY_BASE_NAME, ds_shm.str); mysql_options(&con_slot->mysql, MYSQL_OPT_PROTOCOL, &protocol); } - else if(shared_memory_base_name) + else if (shared_memory_base_name) { mysql_options(&con_slot->mysql, MYSQL_SHARED_MEMORY_BASE_NAME, - shared_memory_base_name); + shared_memory_base_name); } #endif - /* Use default db name */ if (ds_database.length == 0) dynstr_set(&ds_database, opt_db); @@ -6879,10 +6881,8 @@ void run_query_stmt(MYSQL *mysql, struct MYSQL_STMT *stmt; DYNAMIC_STRING ds_prepare_warnings; DYNAMIC_STRING ds_execute_warnings; - ulonglong affected_rows; DBUG_ENTER("run_query_stmt"); DBUG_PRINT("query", ("'%-.60s'", query)); - LINT_INIT(affected_rows); /* Init a new stmt if it's not already one created for this connection @@ -6981,6 +6981,9 @@ void run_query_stmt(MYSQL *mysql, struct handle_no_error(command); if (!disable_result_log) { + ulonglong affected_rows; + LINT_INIT(affected_rows); + /* Not all statements creates a result set. If there is one we can now create another normal result set that contains the meta @@ -7026,39 +7029,33 @@ void run_query_stmt(MYSQL *mysql, struct Need to grab affected rows information before getting warnings here */ - { - ulonglong affected_rows; - LINT_INIT(affected_rows); + if (!disable_info) + affected_rows= mysql_affected_rows(mysql); - if (!disable_info) - affected_rows= mysql_affected_rows(mysql); + if (!disable_warnings) + { + /* Get the warnings from execute */ - if (!disable_warnings) + /* Append warnings to ds - if there are any */ + if (append_warnings(&ds_execute_warnings, mysql) || + ds_execute_warnings.length || + ds_prepare_warnings.length || + ds_warnings->length) { - /* Get the warnings from execute */ - - /* Append warnings to ds - if there are any */ - if (append_warnings(&ds_execute_warnings, mysql) || - ds_execute_warnings.length || - ds_prepare_warnings.length || - ds_warnings->length) - { - dynstr_append_mem(ds, "Warnings:\n", 10); - if (ds_warnings->length) - dynstr_append_mem(ds, ds_warnings->str, - ds_warnings->length); - if (ds_prepare_warnings.length) - dynstr_append_mem(ds, ds_prepare_warnings.str, - ds_prepare_warnings.length); - if (ds_execute_warnings.length) - dynstr_append_mem(ds, ds_execute_warnings.str, - ds_execute_warnings.length); - } + dynstr_append_mem(ds, "Warnings:\n", 10); + if (ds_warnings->length) + dynstr_append_mem(ds, ds_warnings->str, + ds_warnings->length); + if (ds_prepare_warnings.length) + dynstr_append_mem(ds, ds_prepare_warnings.str, + ds_prepare_warnings.length); + if (ds_execute_warnings.length) + dynstr_append_mem(ds, ds_execute_warnings.str, + ds_execute_warnings.length); } - - if (!disable_info) - append_info(ds, affected_rows, mysql_info(mysql)); } + if (!disable_info) + append_info(ds, affected_rows, mysql_info(mysql)); } end: @@ -7235,7 +7232,6 @@ void run_query(struct st_connection *cn, } dynstr_free(&query_str); - } if (sp_protocol_enabled && @@ -7662,6 +7658,7 @@ int main(int argc, char **argv) my_bool q_send_flag= 0, abort_flag= 0; uint command_executed= 0, last_command_executed= 0; char save_file[FN_REFLEN]; + bool empty_result= FALSE; MY_INIT(argv[0]); save_file[0]= 0; @@ -7819,6 +7816,7 @@ int main(int argc, char **argv) verbose_msg("Start processing test commands from '%s' ...", cur_file->file_name); while (!read_command(&command) && !abort_flag) { + my_bool ok_to_do; int current_line_inc = 1, processed = 0; if (command->type == Q_UNKNOWN || command->type == Q_COMMENT_WITH_COMMAND) get_command_type(command); @@ -7831,7 +7829,7 @@ int main(int argc, char **argv) command->type= Q_COMMENT; } - my_bool ok_to_do= cur_block->ok; + ok_to_do= cur_block->ok; /* Some commands need to be "done" the first time if they may get re-iterated over in a true context. This can only happen if there's @@ -8167,8 +8165,6 @@ int main(int argc, char **argv) if (parsing_disabled) die("Test ended with parsing disabled"); - my_bool empty_result= FALSE; - /* The whole test has been executed _sucessfully_. Time to compare result or save it to record file. === modified file 'dbug/dbug.c' --- a/dbug/dbug.c 2009-09-07 20:50:10 +0000 +++ b/dbug/dbug.c 2009-12-07 00:52:40 +0000 @@ -497,12 +497,18 @@ int DbugParse(CODE_STATE *cs, const char const char *end; int rel, f_used=0; struct settings *stack; + int org_cs_locked; stack= cs->stack; + if (!(org_cs_locked= cs->locked)) + { + cs->locked= 1; + pthread_mutex_lock(&THR_LOCK_dbug); + } + if (control[0] == '-' && control[1] == '#') control+=2; - rel= control[0] == '+' || control[0] == '-'; if ((!rel || (!stack->out_file && !stack->next))) { @@ -550,9 +556,11 @@ int DbugParse(CODE_STATE *cs, const char while (control < end) { int c, sign= (*control == '+') ? 1 : (*control == '-') ? -1 : 0; - if (sign) control++; + if (sign) + control++; c= *control++; - if (*control == ',') control++; + if (*control == ',') + control++; /* XXX when adding new cases here, don't forget _db_explain_ ! */ switch (c) { case 'd': @@ -570,7 +578,7 @@ int DbugParse(CODE_STATE *cs, const char { if (DEBUGGING) stack->keywords= ListDel(stack->keywords, control, end); - break; + break; } stack->keywords= ListAdd(stack->keywords, control, end); stack->flags |= DEBUG_ON; @@ -718,8 +726,13 @@ int DbugParse(CODE_STATE *cs, const char control=end+1; end= DbugStrTok(control); } - return !rel || f_used; -} + if (!org_cs_locked) + { + pthread_mutex_unlock(&THR_LOCK_dbug); + cs->locked= 0; + } + return !rel || f_used;} + #define framep_trace_flag(cs, frp) (frp ? \ frp->level & TRACE_ON : \ @@ -1340,11 +1353,11 @@ void _db_doprnt_(const char *format,...) va_start(args,format); + if (!cs->locked) + pthread_mutex_lock(&THR_LOCK_dbug); if (_db_keyword_(cs, cs->u_keyword, 0)) { int save_errno=errno; - if (!cs->locked) - pthread_mutex_lock(&THR_LOCK_dbug); DoPrefix(cs, cs->u_line); if (TRACING) Indent(cs, cs->level + 1); @@ -1356,6 +1369,9 @@ void _db_doprnt_(const char *format,...) DbugFlush(cs); errno=save_errno; } + else if (!cs->locked) + pthread_mutex_unlock(&THR_LOCK_dbug); + va_end(args); } @@ -1386,10 +1402,10 @@ void _db_dump_(uint _line_, const char * CODE_STATE *cs; get_code_state_or_return; + if (!cs->locked) + pthread_mutex_lock(&THR_LOCK_dbug); if (_db_keyword_(cs, keyword, 0)) { - if (!cs->locked) - pthread_mutex_lock(&THR_LOCK_dbug); DoPrefix(cs, _line_); if (TRACING) { @@ -1420,6 +1436,8 @@ void _db_dump_(uint _line_, const char * (void) fputc('\n',cs->stack->out_file); DbugFlush(cs); } + else if (!cs->locked) + pthread_mutex_unlock(&THR_LOCK_dbug); } @@ -2105,7 +2123,8 @@ static void DBUGCloseFile(CODE_STATE *cs { if (fp != stderr && fp != stdout && fclose(fp) == EOF) { - pthread_mutex_lock(&THR_LOCK_dbug); + if (!cs->locked) + pthread_mutex_lock(&THR_LOCK_dbug); (void) fprintf(cs->stack->out_file, ERR_CLOSE, cs->process); perror(""); DbugFlush(cs); === modified file 'extra/yassl/taocrypt/include/block.hpp' --- a/extra/yassl/taocrypt/include/block.hpp 2009-02-10 22:47:54 +0000 +++ b/extra/yassl/taocrypt/include/block.hpp 2009-12-06 17:34:54 +0000 @@ -167,7 +167,8 @@ public: void CleanNew(word32 newSize) { New(newSize); - memset(buffer_, 0, sz_ * sizeof(T)); + if (sz_ > 0) + memset(buffer_, 0, sz_ * sizeof(T)); } void New(word32 newSize) === modified file 'mysql-test/lib/mtr_cases.pm' --- a/mysql-test/lib/mtr_cases.pm 2009-11-16 20:49:51 +0000 +++ b/mysql-test/lib/mtr_cases.pm 2009-12-06 17:34:54 +0000 @@ -101,7 +101,6 @@ sub init_pattern { sub collect_test_cases ($$) { my $suites= shift; # Semicolon separated list of test suites - my %found_suites; my $opt_cases= shift; my $cases= []; # Array of hash(one hash for each testcase) @@ -115,7 +114,6 @@ sub collect_test_cases ($$) { ["ha_innodb_plugin.dll", "ha_innodb_plugin.so", "ha_innodb_plugin.sl"], NOT_REQUIRED); - $do_innodb_plugin= ($::mysql_version_id >= 50100 && !(IS_WINDOWS && $::opt_embedded_server) && $lib_innodb_plugin); @@ -123,7 +121,6 @@ sub collect_test_cases ($$) { foreach my $suite (split(",", $suites)) { push(@$cases, collect_one_suite($suite, $opt_cases)); - $found_suites{$suite}= 1; last if $some_test_found; } @@ -136,12 +133,6 @@ sub collect_test_cases ($$) { { my $found= 0; my ($sname, $tname, $extension)= split_testname($test_name_spec); - if (defined($sname) && !defined($found_suites{$sname})) - { - $found_suites{$sname}= 1; - push(@$cases, collect_one_suite($sname)); - } - foreach my $test ( @$cases ) { # test->{name} is always in suite.name format @@ -247,7 +238,7 @@ sub split_testname { } -sub collect_one_suite($) +sub collect_one_suite { my $suite= shift; # Test suite name my $opt_cases= shift; @@ -767,7 +758,6 @@ sub process_opts_file { } } - ############################################################################## # # Collect information about a single test case === modified file 'mysql-test/lib/mtr_report.pm' --- a/mysql-test/lib/mtr_report.pm 2009-11-16 20:49:51 +0000 +++ b/mysql-test/lib/mtr_report.pm 2009-12-03 11:19:05 +0000 @@ -388,7 +388,7 @@ MSG } elsif (@$extra_warnings) { - mtr_error("There were errors/warnings in server logs after running test cases."); + mtr_error("There where errors/warnings in server logs after running test cases."); } elsif ($fail) { === modified file 'mysql-test/lib/v1/mysql-test-run.pl' --- a/mysql-test/lib/v1/mysql-test-run.pl 2009-02-15 10:58:34 +0000 +++ b/mysql-test/lib/v1/mysql-test-run.pl 2009-12-09 16:43:00 +0000 @@ -178,6 +178,7 @@ our @opt_extra_mysqltest_opt; our $opt_compress; our $opt_ssl; +our $opt_skip_ssl; our $opt_ssl_supported; our $opt_ps_protocol; our $opt_sp_protocol; === modified file 'mysql-test/mysql-test-run.pl' --- a/mysql-test/mysql-test-run.pl 2009-11-30 21:37:27 +0000 +++ b/mysql-test/mysql-test-run.pl 2009-12-06 17:34:54 +0000 @@ -201,10 +201,10 @@ my $opt_mark_progress; my $opt_sleep; -my $opt_testcase_timeout= 15; # minutes -my $opt_suite_timeout = 300; # minutes -my $opt_shutdown_timeout= 10; # seconds -my $opt_start_timeout = 180; # seconds +my $opt_testcase_timeout= 15; # 15 minutes +my $opt_suite_timeout = 360; # 6 hours +my $opt_shutdown_timeout= 10; # 10 seconds +my $opt_start_timeout = 180; # 180 seconds sub testcase_timeout { return $opt_testcase_timeout * 60; }; sub suite_timeout { return $opt_suite_timeout * 60; }; @@ -1319,6 +1319,8 @@ sub command_line_setup { { # Indicate that we are using debugger $glob_debugger= 1; + $opt_testcase_timeout= 60*60*24; # Don't abort debugging with timeout + $opt_suite_timeout= $opt_testcase_timeout; $opt_retry= 1; $opt_retry_failure= 1; @@ -2151,7 +2153,6 @@ sub environment_setup { # Create an environment variable to make it possible # to detect that valgrind is being used from test cases $ENV{'VALGRIND_TEST'}= $opt_valgrind; - } @@ -2908,8 +2909,8 @@ sub mysql_install_db { my $bootstrap_sql_file= "$opt_vardir/tmp/bootstrap.sql"; my $path_sql= my_find_file($install_basedir, - ["mysql", "sql/share", "share/mysql", - "share/mariadb", "share", "scripts"], + ["mysql", "sql/share", "share/mariadb", + "share/mysql", "share", "scripts"], "mysql_system_tables.sql", NOT_REQUIRED); @@ -3861,7 +3862,7 @@ sub extract_server_log ($$) { my ($error_log, $tname) = @_; # Open the servers .err log file and read all lines - # belonging to current tets into @lines + # belonging to current test into @lines my $Ferr = IO::File->new($error_log) or mtr_error("Could not open file '$error_log' for reading: $!"); @@ -5682,12 +5683,15 @@ Misc options servers to exit before finishing the process fast Run as fast as possible, dont't wait for servers to shutdown etc. - parallel=N Run tests in N parallel threads (default=1) + parallel=N Run tests in N parallel threads (default 1) Use parallel=auto for auto-setting of N repeat=N Run each test N number of times - retry=N Retry tests that fail N times, limit number of failures - to $opt_retry_failure - retry-failure=N Limit number of retries for a failed test + retry=N Retry tests that fail up to N times (default $opt_retry). + Retries are also limited by the maximum number of + failures before stopping, set with the --retry-failure + option + retry-failure=N When using the --retry option to retry failed tests, + stop when N failures have occured (default $opt_retry_failure) reorder Reorder tests to get fewer server restarts help Get this help text === modified file 'mysql-test/r/ctype_ucs.result' --- a/mysql-test/r/ctype_ucs.result 2008-12-23 14:21:01 +0000 +++ b/mysql-test/r/ctype_ucs.result 2009-12-03 12:02:37 +0000 @@ -1211,3 +1211,47 @@ HEX(DAYNAME(19700101)) 0427043504420432043504400433 SET character_set_connection=latin1; End of 5.0 tests +Start of 5.1 tests +SET NAMES utf8; +CREATE TABLE t1 ( +a varchar(10) CHARACTER SET ucs2 COLLATE ucs2_czech_ci, +key(a) +); +INSERT INTO t1 VALUES +('aa'),('bb'),('cc'),('dd'),('ee'),('ff'),('gg'),('hh'),('ii'), +('jj'),('kk'),('ll'),('mm'),('nn'),('oo'),('pp'),('rr'),('ss'), +('tt'),('uu'),('vv'),('ww'),('xx'),('yy'),('zz'); +INSERT INTO t1 VALUES ('ca'),('cz'),('ch'); +INSERT INTO t1 VALUES ('da'),('dz'), (X'0064017E'); +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'b%'; +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 1 Using where; Using index +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'c%'; +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 30 Using where; Using index +SELECT * FROM t1 WHERE a LIKE 'c%'; +a +ca +cc +cz +ch +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'ch%'; +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 1 Using where; Using index +SELECT * FROM t1 WHERE a LIKE 'ch%'; +a +ch +ALTER TABLE t1 MODIFY a VARCHAR(10) CHARACTER SET ucs2 COLLATE ucs2_croatian_ci; +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'd%'; +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 1 Using where; Using index +SELECT hex(concat('d',_ucs2 0x017E,'%')); +hex(concat('d',_ucs2 0x017E,'%')) +0064017E0025 +EXPLAIN SELECT * FROM t1 WHERE a LIKE concat('d',_ucs2 0x017E,'%'); +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 1 Using where; Using index +SELECT hex(a) FROM t1 WHERE a LIKE concat('D',_ucs2 0x017E,'%'); +hex(a) +0064017E +DROP TABLE t1; === modified file 'mysql-test/r/warnings.result' --- a/mysql-test/r/warnings.result 2009-09-10 08:49:49 +0000 +++ b/mysql-test/r/warnings.result 2009-12-06 17:26:12 +0000 @@ -319,3 +319,17 @@ SHOW ERRORS; Level Code Message Error 1051 Unknown table 't1' End of 5.0 tests +set sql_mode = default; +select CAST(a AS DECIMAL(13,5)) FROM (SELECT '' as a) t; +CAST(a AS DECIMAL(13,5)) +0.00000 +Warnings: +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Warning 1292 Truncated incorrect DECIMAL value: '' +create table t1 (a integer unsigned); +insert into t1 values (1),(-1),(0),(-2); +Warnings: +Warning 1264 Out of range value for column 'a' at row 2 +Warning 1264 Out of range value for column 'a' at row 4 +drop table t1; +End of 5.1 tests === modified file 'mysql-test/suite/federated/disabled.def' --- a/mysql-test/suite/federated/disabled.def 2009-10-30 18:50:56 +0000 +++ b/mysql-test/suite/federated/disabled.def 2009-11-14 19:33:59 +0000 @@ -9,5 +9,4 @@ # Do not use any TAB characters for whitespace. # ############################################################################## -federated_server : needs fixup === modified file 'mysql-test/suite/federated/federated_server.result' --- a/mysql-test/suite/federated/federated_server.result 2009-10-30 18:50:56 +0000 +++ b/mysql-test/suite/federated/federated_server.result 2009-11-14 19:33:59 +0000 @@ -175,6 +175,8 @@ CREATE TABLE db_bogus.t1 ( ) ; INSERT INTO db_bogus.t1 VALUES ('2','this is bogus'); +create user test_fed@localhost identified by 'foo'; +grant all on db_legitimate.* to test_fed@localhost; create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', @@ -211,15 +213,14 @@ id name alter server s1 options (database 'db_bogus'); flush tables; select * from federated.t1; -id name -2 this is bogus +ERROR HY000: There was a problem processing the query on the foreign data source. Data source error: : 1044 : Access denied for user 'test_fed'@'localhost' to databa drop server if exists 's1'; ERROR 42000: Access denied; you need the SUPER privilege for this operation create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', -USER 'root', -PASSWORD '', +USER 'test_fed', +PASSWORD 'foo', PORT SLAVE_PORT, SOCKET '', OWNER 'root'); @@ -228,8 +229,8 @@ drop server 's1'; create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', -USER 'root', -PASSWORD '', +USER 'test_fed', +PASSWORD 'foo', PORT SLAVE_PORT, SOCKET '', OWNER 'root'); @@ -237,6 +238,7 @@ flush tables; select * from federated.t1; id name 1 this is legitimate +drop user test_fed@localhost; drop database db_legitimate; drop database db_bogus; drop user guest_super@localhost; @@ -275,6 +277,6 @@ call p1(); drop procedure p1; drop server if exists s; DROP TABLE IF EXISTS federated.t1; -DROP DATABASE federated; +DROP DATABASE IF EXISTS federated; DROP TABLE IF EXISTS federated.t1; -DROP DATABASE federated; +DROP DATABASE IF EXISTS federated; === modified file 'mysql-test/suite/federated/federated_server.test' --- a/mysql-test/suite/federated/federated_server.test 2009-10-30 18:50:56 +0000 +++ b/mysql-test/suite/federated/federated_server.test 2009-11-14 19:33:59 +0000 @@ -239,6 +239,7 @@ alter server s1 options (database 'db_bo connection master; flush tables; +--error ER_QUERY_ON_FOREIGN_DATA_SOURCE select * from federated.t1; connection conn_select; @@ -249,8 +250,8 @@ drop server if exists 's1'; eval create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', - USER 'root', - PASSWORD '', + USER 'test_fed', + PASSWORD 'foo', PORT $SLAVE_MYPORT, SOCKET '', OWNER 'root'); @@ -261,8 +262,8 @@ drop server 's1'; eval create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', - USER 'root', - PASSWORD '', + USER 'test_fed', + PASSWORD 'foo', PORT $SLAVE_MYPORT, SOCKET '', OWNER 'root'); @@ -273,6 +274,7 @@ select * from federated.t1; # clean up test connection slave; +drop user test_fed@localhost; drop database db_legitimate; drop database db_bogus; === modified file 'mysql-test/suite/funcs_1/r/innodb_func_view.result' --- a/mysql-test/suite/funcs_1/r/innodb_func_view.result 2009-05-15 12:57:51 +0000 +++ b/mysql-test/suite/funcs_1/r/innodb_func_view.result 2009-12-06 17:26:12 +0000 @@ -3372,9 +3372,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 29 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 SHOW CREATE VIEW v1; View Create View character_set_client collation_connection v1 CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `v1` AS select cast(`t1_values`.`my_varbinary_1000` as decimal(37,2)) AS `CAST(my_varbinary_1000 AS DECIMAL(37,2))`,`t1_values`.`my_varbinary_1000` AS `my_varbinary_1000`,`t1_values`.`id` AS `id` from `t1_values` latin1 latin1_swedish_ci @@ -3389,9 +3389,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 29 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 DROP VIEW v1; @@ -3408,11 +3408,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 28 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' Warning 1292 Truncated incorrect DECIMAL value: '-1' Warning 1292 Truncated incorrect DECIMAL value: '-3333.3333' @@ -3430,11 +3430,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 28 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' Warning 1292 Truncated incorrect DECIMAL value: '-1' Warning 1292 Truncated incorrect DECIMAL value: '-3333.3333' @@ -3454,9 +3454,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 27 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 SHOW CREATE VIEW v1; View Create View character_set_client collation_connection v1 CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `v1` AS select cast(`t1_values`.`my_varchar_1000` as decimal(37,2)) AS `CAST(my_varchar_1000 AS DECIMAL(37,2))`,`t1_values`.`my_varchar_1000` AS `my_varchar_1000`,`t1_values`.`id` AS `id` from `t1_values` latin1 latin1_swedish_ci @@ -3471,9 +3471,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 27 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 DROP VIEW v1; @@ -3490,11 +3490,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 26 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' SHOW CREATE VIEW v1; View Create View character_set_client collation_connection @@ -3510,11 +3510,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 26 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' DROP VIEW v1; === modified file 'mysql-test/suite/funcs_1/r/memory_func_view.result' --- a/mysql-test/suite/funcs_1/r/memory_func_view.result 2009-02-14 16:00:11 +0000 +++ b/mysql-test/suite/funcs_1/r/memory_func_view.result 2009-12-06 17:26:12 +0000 @@ -3373,9 +3373,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 29 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 SHOW CREATE VIEW v1; View Create View character_set_client collation_connection v1 CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `v1` AS select cast(`t1_values`.`my_varbinary_1000` as decimal(37,2)) AS `CAST(my_varbinary_1000 AS DECIMAL(37,2))`,`t1_values`.`my_varbinary_1000` AS `my_varbinary_1000`,`t1_values`.`id` AS `id` from `t1_values` latin1 latin1_swedish_ci @@ -3390,9 +3390,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 29 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 DROP VIEW v1; @@ -3409,11 +3409,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 28 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' Warning 1292 Truncated incorrect DECIMAL value: '-1' Warning 1292 Truncated incorrect DECIMAL value: '-3333.3333' @@ -3431,11 +3431,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 28 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' Warning 1292 Truncated incorrect DECIMAL value: '-1' Warning 1292 Truncated incorrect DECIMAL value: '-3333.3333' @@ -3455,9 +3455,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 27 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 SHOW CREATE VIEW v1; View Create View character_set_client collation_connection v1 CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `v1` AS select cast(`t1_values`.`my_varchar_1000` as decimal(37,2)) AS `CAST(my_varchar_1000 AS DECIMAL(37,2))`,`t1_values`.`my_varchar_1000` AS `my_varchar_1000`,`t1_values`.`id` AS `id` from `t1_values` latin1 latin1_swedish_ci @@ -3472,9 +3472,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 27 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 DROP VIEW v1; @@ -3491,11 +3491,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 26 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' SHOW CREATE VIEW v1; View Create View character_set_client collation_connection @@ -3511,11 +3511,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 26 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' DROP VIEW v1; === modified file 'mysql-test/suite/funcs_1/r/myisam_func_view.result' --- a/mysql-test/suite/funcs_1/r/myisam_func_view.result 2009-02-14 16:00:11 +0000 +++ b/mysql-test/suite/funcs_1/r/myisam_func_view.result 2009-12-06 17:26:12 +0000 @@ -3373,9 +3373,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 29 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 SHOW CREATE VIEW v1; View Create View character_set_client collation_connection v1 CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `v1` AS select cast(`t1_values`.`my_varbinary_1000` as decimal(37,2)) AS `CAST(my_varbinary_1000 AS DECIMAL(37,2))`,`t1_values`.`my_varbinary_1000` AS `my_varbinary_1000`,`t1_values`.`id` AS `id` from `t1_values` latin1 latin1_swedish_ci @@ -3390,9 +3390,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 29 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 DROP VIEW v1; @@ -3409,11 +3409,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 28 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' Warning 1292 Truncated incorrect DECIMAL value: '-1' Warning 1292 Truncated incorrect DECIMAL value: '-3333.3333' @@ -3431,11 +3431,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 28 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' Warning 1292 Truncated incorrect DECIMAL value: '-1' Warning 1292 Truncated incorrect DECIMAL value: '-3333.3333' @@ -3455,9 +3455,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 27 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 SHOW CREATE VIEW v1; View Create View character_set_client collation_connection v1 CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `v1` AS select cast(`t1_values`.`my_varchar_1000` as decimal(37,2)) AS `CAST(my_varchar_1000 AS DECIMAL(37,2))`,`t1_values`.`my_varchar_1000` AS `my_varchar_1000`,`t1_values`.`id` AS `id` from `t1_values` latin1 latin1_swedish_ci @@ -3472,9 +3472,9 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 27 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 +Error 1366 Incorrect decimal value: '' for column '' at row 0 DROP VIEW v1; @@ -3491,11 +3491,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 26 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' SHOW CREATE VIEW v1; View Create View character_set_client collation_connection @@ -3511,11 +3511,11 @@ NULL NULL 1 -1.00 -1 5 -3333.33 -3333.3333 26 Warnings: -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: '<--------30 characters------->' -Error 1366 Incorrect decimal value: '' for column '' at row -1 +Error 1366 Incorrect decimal value: '' for column '' at row 0 Warning 1292 Truncated incorrect DECIMAL value: ' ---��*$-- ' DROP VIEW v1; === modified file 'mysql-test/t/ctype_ucs.test' --- a/mysql-test/t/ctype_ucs.test 2008-12-23 14:21:01 +0000 +++ b/mysql-test/t/ctype_ucs.test 2009-12-03 12:02:37 +0000 @@ -723,3 +723,34 @@ SELECT HEX(DAYNAME(19700101)); SET character_set_connection=latin1; --echo End of 5.0 tests + + +--echo Start of 5.1 tests +# +# Checking my_like_range_ucs2 +# +SET NAMES utf8; +CREATE TABLE t1 ( + a varchar(10) CHARACTER SET ucs2 COLLATE ucs2_czech_ci, + key(a) +); +INSERT INTO t1 VALUES +('aa'),('bb'),('cc'),('dd'),('ee'),('ff'),('gg'),('hh'),('ii'), +('jj'),('kk'),('ll'),('mm'),('nn'),('oo'),('pp'),('rr'),('ss'), +('tt'),('uu'),('vv'),('ww'),('xx'),('yy'),('zz'); +INSERT INTO t1 VALUES ('ca'),('cz'),('ch'); +INSERT INTO t1 VALUES ('da'),('dz'), (X'0064017E'); +# This one should scan only one row +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'b%'; +# This one should scan many rows: 'c' is a contraction head +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'c%'; +SELECT * FROM t1 WHERE a LIKE 'c%'; +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'ch%'; +SELECT * FROM t1 WHERE a LIKE 'ch%'; +ALTER TABLE t1 MODIFY a VARCHAR(10) CHARACTER SET ucs2 COLLATE ucs2_croatian_ci; +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'd%'; +SELECT hex(concat('d',_ucs2 0x017E,'%')); +EXPLAIN SELECT * FROM t1 WHERE a LIKE concat('d',_ucs2 0x017E,'%'); +SELECT hex(a) FROM t1 WHERE a LIKE concat('D',_ucs2 0x017E,'%'); + +DROP TABLE t1; === modified file 'mysql-test/t/warnings.test' --- a/mysql-test/t/warnings.test 2009-11-16 20:49:51 +0000 +++ b/mysql-test/t/warnings.test 2009-12-06 17:26:12 +0000 @@ -194,7 +194,6 @@ DROP PROCEDURE sp1; DROP PROCEDURE sp2; DROP PROCEDURE sp3; - # # Bug#30059: End-space truncation warnings are inconsistent or incorrect # @@ -235,3 +234,15 @@ DROP TABLE t1; SHOW ERRORS; --echo End of 5.0 tests + +# +# Test warning with row numbers +# + +set sql_mode = default; +select CAST(a AS DECIMAL(13,5)) FROM (SELECT '' as a) t; +create table t1 (a integer unsigned); +insert into t1 values (1),(-1),(0),(-2); +drop table t1; + +--echo End of 5.1 tests === modified file 'plugin/fulltext/plugin_example.c' --- a/plugin/fulltext/plugin_example.c 2007-04-26 19:26:04 +0000 +++ b/plugin/fulltext/plugin_example.c 2009-12-06 17:34:54 +0000 @@ -145,7 +145,7 @@ static int simple_parser_deinit(MYSQL_FT the list of search terms when parsing a search string. */ -static void add_word(MYSQL_FTPARSER_PARAM *param, char *word, size_t len) +static void add_word(MYSQL_FTPARSER_PARAM *param, const unsigned char *word, size_t len) { MYSQL_FTPARSER_BOOLEAN_INFO bool_info= { FT_TOKEN_WORD, 0, 0, 0, 0, ' ', 0 }; @@ -169,7 +169,7 @@ static void add_word(MYSQL_FTPARSER_PARA static int simple_parser_parse(MYSQL_FTPARSER_PARAM *param) { - char *end, *start, *docend= param->doc + param->length; + const unsigned char *end, *start, *docend= param->doc + param->length; number_of_calls++; === modified file 'sql-common/client.c' --- a/sql-common/client.c 2009-11-16 20:49:51 +0000 +++ b/sql-common/client.c 2009-12-03 15:26:54 +0000 @@ -3208,7 +3208,7 @@ const char * STDCALL mysql_error(MYSQL * mysql Connection EXAMPLE - 4.1.0-alfa -> 40100 + MariaDB-4.1.0-alfa -> 40100 NOTES We will ensure that a newer server always has a bigger number. @@ -3221,7 +3221,11 @@ ulong STDCALL mysql_get_server_version(MYSQL *mysql) { uint major, minor, version; - char *pos= mysql->server_version, *end_pos; + const char *pos= mysql->server_version; + char *end_pos; + /* Skip possible prefix */ + while (*pos && !my_isdigit(&my_charset_latin1, *pos)) + pos++; major= (uint) strtoul(pos, &end_pos, 10); pos=end_pos+1; minor= (uint) strtoul(pos, &end_pos, 10); pos=end_pos+1; version= (uint) strtoul(pos, &end_pos, 10); === modified file 'sql/my_decimal.cc' --- a/sql/my_decimal.cc 2008-11-27 11:33:04 +0000 +++ b/sql/my_decimal.cc 2009-12-06 17:26:12 +0000 @@ -38,7 +38,7 @@ int decimal_operation_results(int result case E_DEC_TRUNCATED: push_warning_printf(current_thd, MYSQL_ERROR::WARN_LEVEL_WARN, WARN_DATA_TRUNCATED, ER(WARN_DATA_TRUNCATED), - "", (long)-1); + "", (ulong) 0); break; case E_DEC_OVERFLOW: push_warning_printf(current_thd, MYSQL_ERROR::WARN_LEVEL_ERROR, @@ -54,7 +54,7 @@ int decimal_operation_results(int result push_warning_printf(current_thd, MYSQL_ERROR::WARN_LEVEL_ERROR, ER_TRUNCATED_WRONG_VALUE_FOR_FIELD, ER(ER_TRUNCATED_WRONG_VALUE_FOR_FIELD), - "decimal", "", "", (long)-1); + "decimal", "", "", (ulong) 0); break; case E_DEC_OOM: my_error(ER_OUT_OF_RESOURCES, MYF(0)); === modified file 'sql/mysqld.cc' --- a/sql/mysqld.cc 2009-11-30 21:37:27 +0000 +++ b/sql/mysqld.cc 2009-12-04 15:12:22 +0000 @@ -4169,8 +4169,10 @@ server."); Need to unlock as global_system_variables.table_plugin was acquired during plugin_init() */ + pthread_mutex_lock(&LOCK_global_system_variables); plugin_unlock(0, global_system_variables.table_plugin); global_system_variables.table_plugin= plugin; + pthread_mutex_unlock(&LOCK_global_system_variables); } } #if defined(WITH_MARIA_STORAGE_ENGINE) && defined(USE_MARIA_FOR_TMP_TABLES) === modified file 'sql/share/errmsg.txt' --- a/sql/share/errmsg.txt 2009-11-16 20:49:51 +0000 +++ b/sql/share/errmsg.txt 2009-12-06 17:26:12 +0000 @@ -3173,22 +3173,22 @@ ER_CANT_CREATE_THREAD swe "Kan inte skapa en ny tr�(errno %d)" ukr "�� Ǧ��(��%d). � � � �� - �� ER_WRONG_VALUE_COUNT_ON_ROW 21S01 - cze "Po-B� sloupc�dpov� po� hodnot na � %ld" - dan "Kolonne antallet stemmer ikke overens med antallet af v�ier i post %ld" - nla "Kolom aantal komt niet overeen met waarde aantal in rij %ld" - eng "Column count doesn't match value count at row %ld" - est "Tulpade hulk erineb v�tuste hulgast real %ld" - ger "Anzahl der Felder stimmt nicht mit der Anzahl der Werte in Zeile %ld �n" - hun "Az oszlopban talalhato ertek nem egyezik meg a %ld sorban szamitott ertekkel" - ita "Il numero delle colonne non corrisponde al conteggio alla riga %ld" - kor "Row %ld�� Į�� ī��value ī��ġ�� ʽ�ϴ�" - por "Contagem de colunas n�confere com a contagem de valores na linha %ld" - rum "Numarul de coloane nu corespunde cu numarul de valori la linia %ld" - rus "�� %ld" - serbian "Broj kolona ne odgovara broju vrednosti u slogu %ld" - spa "El n� de columnas no corresponde al n� en la l�a %ld" - swe "Antalet kolumner motsvarar inte antalet v�en p�ad: %ld" - ukr "�� ˦�˦��æ %ld" + cze "Po-B� sloupc�dpov� po� hodnot na � %lu" + dan "Kolonne antallet stemmer ikke overens med antallet af v�ier i post %lu" + nla "Kolom aantal komt niet overeen met waarde aantal in rij %lu" + eng "Column count doesn't match value count at row %lu" + est "Tulpade hulk erineb v�tuste hulgast real %lu" + ger "Anzahl der Felder stimmt nicht mit der Anzahl der Werte in Zeile %lu �n" + hun "Az oszlopban talalhato ertek nem egyezik meg a %lu sorban szamitott ertekkel" + ita "Il numero delle colonne non corrisponde al conteggio alla riga %lu" + kor "Row %lu�� Į�� ī��value ī��ġ�� ʽ�ϴ�" + por "Contagem de colunas n�confere com a contagem de valores na linha %lu" + rum "Numarul de coloane nu corespunde cu numarul de valori la linia %lu" + rus "�� %lu" + serbian "Broj kolona ne odgovara broju vrednosti u slogu %lu" + spa "El n� de columnas no corresponde al n� en la l�a %lu" + swe "Antalet kolumner motsvarar inte antalet v�en p�ad: %lu" + ukr "�� ˦�˦��æ %lu" ER_CANT_REOPEN_TABLE cze "Nemohu znovuotev-B�abulku: '%-.192s" dan "Kan ikke gen�e tabel '%-.192s" @@ -4887,29 +4887,29 @@ ER_CUT_VALUE_GROUP_CONCAT swe "%d rad(er) kapades av group_concat()" ukr "%d line(s) was(were) cut by group_concat()" ER_WARN_TOO_FEW_RECORDS 01000 - eng "Row %ld doesn't contain data for all columns" - ger "Zeile %ld enth� nicht f�e Felder Daten" - nla "Rij %ld bevat niet de data voor alle kolommen" - por "Conta de registro �enor que a conta de coluna na linha %ld" - spa "L�a %ld no contiene datos para todas las columnas" + eng "Row %lu doesn't contain data for all columns" + ger "Zeile %lu enth� nicht f�e Felder Daten" + nla "Rij %lu bevat niet de data voor alle kolommen" + por "Conta de registro �enor que a conta de coluna na linha %lu" + spa "L�a %lu no contiene datos para todas las columnas" ER_WARN_TOO_MANY_RECORDS 01000 - eng "Row %ld was truncated; it contained more data than there were input columns" - ger "Zeile %ld gek�die Zeile enthielt mehr Daten, als es Eingabefelder gibt" - nla "Regel %ld ingekort, bevatte meer data dan invoer kolommen" - por "Conta de registro �aior que a conta de coluna na linha %ld" - spa "L�a %ld fu�runcada; La misma contine mas datos que las que existen en las columnas de entrada" + eng "Row %lu was truncated; it contained more data than there were input columns" + ger "Zeile %lu gek�die Zeile enthielt mehr Daten, als es Eingabefelder gibt" + nla "Regel %lu ingekort, bevatte meer data dan invoer kolommen" + por "Conta de registro �aior que a conta de coluna na linha %lu" + spa "L�a %lu fu�runcada; La misma contine mas datos que las que existen en las columnas de entrada" ER_WARN_NULL_TO_NOTNULL 22004 - eng "Column set to default value; NULL supplied to NOT NULL column '%s' at row %ld" - ger "Feld auf Vorgabewert gesetzt, da NULL f�-NULL-Feld '%s' in Zeile %ld angegeben" - por "Dado truncado, NULL fornecido para NOT NULL coluna '%s' na linha %ld" - spa "Datos truncado, NULL suministrado para NOT NULL columna '%s' en la l�a %ld" + eng "Column set to default value; NULL supplied to NOT NULL column '%s' at row %lu" + ger "Feld auf Vorgabewert gesetzt, da NULL f�-NULL-Feld '%s' in Zeile %lu angegeben" + por "Dado truncado, NULL fornecido para NOT NULL coluna '%s' na linha %lu" + spa "Datos truncado, NULL suministrado para NOT NULL columna '%s' en la l�a %lu" ER_WARN_DATA_OUT_OF_RANGE 22003 - eng "Out of range value for column '%s' at row %ld" + eng "Out of range value for column '%s' at row %lu" WARN_DATA_TRUNCATED 01000 - eng "Data truncated for column '%s' at row %ld" - ger "Daten abgeschnitten f�d '%s' in Zeile %ld" - por "Dado truncado para coluna '%s' na linha %ld" - spa "Datos truncados para columna '%s' en la l�a %ld" + eng "Data truncated for column '%s' at row %lu" + ger "Daten abgeschnitten f�d '%s' in Zeile %lu" + por "Dado truncado para coluna '%s' na linha %lu" + spa "Datos truncados para columna '%s' en la l�a %lu" ER_WARN_USING_OTHER_HANDLER eng "Using storage engine %s for table '%s'" ger "F�elle '%s' wird Speicher-Engine %s benutzt" @@ -5090,8 +5090,8 @@ ER_UNKNOWN_TIME_ZONE eng "Unknown or incorrect time zone: '%-.64s'" ger "Unbekannte oder falsche Zeitzone: '%-.64s'" ER_WARN_INVALID_TIMESTAMP - eng "Invalid TIMESTAMP value in column '%s' at row %ld" - ger "Ung�r TIMESTAMP-Wert in Feld '%s', Zeile %ld" + eng "Invalid TIMESTAMP value in column '%s' at row %lu" + ger "Ung�r TIMESTAMP-Wert in Feld '%s', Zeile %lu" ER_INVALID_CHARACTER_STRING eng "Invalid %s character string: '%.64s'" ger "Ung�r %s-Zeichen-String: '%.64s'" @@ -5322,8 +5322,8 @@ ER_DIVISION_BY_ZERO 22012 eng "Division by 0" ger "Division durch 0" ER_TRUNCATED_WRONG_VALUE_FOR_FIELD - eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld" - ger "Falscher %-.32s-Wert: '%-.128s' f�d '%.192s' in Zeile %ld" + eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %lu" + ger "Falscher %-.32s-Wert: '%-.128s' f�d '%.192s' in Zeile %lu" ER_ILLEGAL_VALUE_FOR_TYPE 22007 eng "Illegal %s '%-.192s' value found during parsing" ger "Nicht zul�iger %s-Wert '%-.192s' beim Parsen gefunden" @@ -5456,8 +5456,8 @@ ER_PROC_AUTO_REVOKE_FAIL eng "Failed to revoke all privileges to dropped routine" ger "R�me aller Rechte f� gel�te Routine fehlgeschlagen" ER_DATA_TOO_LONG 22001 - eng "Data too long for column '%s' at row %ld" - ger "Daten zu lang f�d '%s' in Zeile %ld" + eng "Data too long for column '%s' at row %lu" + ger "Daten zu lang f�d '%s' in Zeile %lu" ER_SP_BAD_SQLSTATE 42000 eng "Bad SQLSTATE: '%s'" ger "Ung�r SQLSTATE: '%s'" === modified file 'sql/slave.cc' --- a/sql/slave.cc 2009-11-16 20:49:51 +0000 +++ b/sql/slave.cc 2009-12-06 17:51:48 +0000 @@ -1117,18 +1117,27 @@ be equal for the Statement-format replic goto err; } } - else if (is_network_error(mysql_errno(mysql))) + else if (is_network_error(err_code= mysql_errno(mysql))) { - mi->report(WARNING_LEVEL, mysql_errno(mysql), - "Get master TIME_ZONE failed with error: %s", mysql_error(mysql)); + mi->report(ERROR_LEVEL, err_code, + "Get master TIME_ZONE failed with error: %s", + mysql_error(mysql)); goto network_err; - } + } + else if (err_code == ER_UNKNOWN_SYSTEM_VARIABLE) + { + /* We use ERROR_LEVEL to get the error logged to file */ + mi->report(ERROR_LEVEL, err_code, + + "MySQL master doesn't have a TIME_ZONE variable. Note that" + "if your timezone is not same between master and slave, your " + "slave may get wrong data into timestamp columns"); + } else { /* Fatal error */ errmsg= "The slave I/O thread stops because a fatal error is encountered \ when it try to get the value of TIME_ZONE global variable from master."; - err_code= mysql_errno(mysql); sprintf(err_buff, "%s Error: %s", errmsg, mysql_error(mysql)); goto err; } === modified file 'sql/sql_base.cc' --- a/sql/sql_base.cc 2009-11-30 21:37:27 +0000 +++ b/sql/sql_base.cc 2009-12-04 15:12:22 +0000 @@ -8488,19 +8488,26 @@ bool remove_table_from_cache(THD *thd, c result=1; } /* Kill delayed insert threads */ - if ((in_use->system_thread & SYSTEM_THREAD_DELAYED_INSERT) && - ! in_use->killed) + if ((in_use->system_thread & SYSTEM_THREAD_DELAYED_INSERT)) { - in_use->killed= THD::KILL_CONNECTION; - pthread_mutex_lock(&in_use->mysys_var->mutex); - if (in_use->mysys_var->current_cond) - { - pthread_mutex_lock(in_use->mysys_var->current_mutex); - signalled= 1; - pthread_cond_broadcast(in_use->mysys_var->current_cond); - pthread_mutex_unlock(in_use->mysys_var->current_mutex); - } - pthread_mutex_unlock(&in_use->mysys_var->mutex); + if (!in_use->killed) + { + in_use->killed= THD::KILL_CONNECTION; + pthread_mutex_lock(&in_use->mysys_var->mutex); + if (in_use->mysys_var->current_cond) + { + pthread_mutex_lock(in_use->mysys_var->current_mutex); + signalled= 1; + pthread_cond_broadcast(in_use->mysys_var->current_cond); + pthread_mutex_unlock(in_use->mysys_var->current_mutex); + } + pthread_mutex_unlock(&in_use->mysys_var->mutex); + } + /* + Don't abort locks. Instead give the delayed insert thread + time to finish it's inserts and die gracefully. + */ + continue; } /* Now we must abort all tables locks used by this thread === modified file 'sql/sql_class.cc' --- a/sql/sql_class.cc 2009-11-30 21:37:27 +0000 +++ b/sql/sql_class.cc 2009-12-04 15:12:22 +0000 @@ -2046,7 +2046,7 @@ bool select_export::send_data(List<Item> ER_TRUNCATED_WRONG_VALUE_FOR_FIELD, ER(ER_TRUNCATED_WRONG_VALUE_FOR_FIELD), "string", printable_buff, - item->name, row_count); + item->name, (ulong) row_count); } cvt_str.length(bytes); res= &cvt_str; === modified file 'sql/sql_insert.cc' --- a/sql/sql_insert.cc 2009-11-30 21:37:27 +0000 +++ b/sql/sql_insert.cc 2009-12-04 15:12:22 +0000 @@ -2618,7 +2618,7 @@ bool Delayed_insert::handle_inserts(void or if another thread is removing the current table definition from the table cache. */ - my_error(ER_DELAYED_CANT_CHANGE_LOCK,MYF(ME_FATALERROR), + my_error(ER_DELAYED_CANT_CHANGE_LOCK, MYF(ME_FATALERROR | ME_NOREFRESH), table->s->table_name.str); goto err; } @@ -2791,10 +2791,11 @@ bool Delayed_insert::handle_inserts(void query_cache_invalidate3(&thd, table, 1); if (thr_reschedule_write_lock(*thd.lock->locks)) { - /* This is not known to happen. */ - my_error(ER_DELAYED_CANT_CHANGE_LOCK,MYF(ME_FATALERROR), - table->s->table_name.str); - goto err; + /* This is not known to happen. */ + my_error(ER_DELAYED_CANT_CHANGE_LOCK, + MYF(ME_FATALERROR | ME_NOREFRESH), + table->s->table_name.str); + goto err; } if (!using_bin_log) table->file->extra(HA_EXTRA_WRITE_CACHE); === modified file 'storage/federatedx/ha_federatedx.cc' --- a/storage/federatedx/ha_federatedx.cc 2009-11-30 21:37:27 +0000 +++ b/storage/federatedx/ha_federatedx.cc 2009-12-03 11:34:11 +0000 @@ -1,5 +1,5 @@ /* -Copyright (c) 2008, Patrick Galbraith +Copyright (c) 2008-2009, Patrick Galbraith & Antony Curtis All rights reserved. Redistribution and use in source and binary forms, with or without @@ -308,7 +308,7 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE */ -#define MYSQL_SERVER 1q +#define MYSQL_SERVER 1 #include "mysql_priv.h" #include <mysql/plugin.h> @@ -1627,7 +1627,13 @@ static int free_server(federatedx_txn *t { MEM_ROOT mem_root; - txn->close(server); + if (!txn) + { + federatedx_txn tmp_txn; + tmp_txn.close(server); + } + else + txn->close(server); DBUG_ASSERT(server->io_count == 0); @@ -1785,21 +1791,25 @@ int ha_federatedx::close(void) if (stored_result) retval= free_result(); - /* Disconnect from mysql. thd may be null during refresh */ - txn= thd ? get_txn(thd, true) : new federatedx_txn(); + /* Disconnect from mysql */ + if (!thd || !(txn= get_txn(thd, true))) + { + federatedx_txn tmp_txn; + + tmp_txn.release(&io); - if (txn) + DBUG_ASSERT(io == NULL); + + if ((error= free_share(&tmp_txn, share))) + retval= error; + } + else { txn->release(&io); - DBUG_ASSERT(io == NULL); if ((error= free_share(txn, share))) retval= error; - - if (!thd) - delete txn; - } DBUG_RETURN(retval); } @@ -2793,14 +2803,16 @@ int ha_federatedx::rnd_end() int ha_federatedx::free_result() { int error; + federatedx_io *tmp_io= 0, **iop; DBUG_ASSERT(stored_result); - if ((error= txn->acquire(share, FALSE, &io))) + if (!*(iop= &io) && (error= txn->acquire(share, TRUE, (iop= &tmp_io)))) { DBUG_ASSERT(0); // Fail when testing return error; } - io->free_result(stored_result); + (*iop)->free_result(stored_result); stored_result= 0; + txn->release(&tmp_io); return 0; } @@ -2985,7 +2997,7 @@ int ha_federatedx::info(uint flag) { char error_buffer[FEDERATEDX_QUERY_BUFFER_SIZE]; uint error_code; - federatedx_io *tmp_io= 0; + federatedx_io *tmp_io= 0, **iop= 0; DBUG_ENTER("ha_federatedx::info"); error_code= ER_QUERY_ON_FOREIGN_DATA_SOURCE; @@ -2993,7 +3005,7 @@ int ha_federatedx::info(uint flag) /* we want not to show table status if not needed to do so */ if (flag & (HA_STATUS_VARIABLE | HA_STATUS_CONST | HA_STATUS_AUTO)) { - if ((error_code= txn->acquire(share, TRUE, &tmp_io))) + if (!*(iop= &io) && (error_code= txn->acquire(share, TRUE, (iop= &tmp_io)))) goto fail; } @@ -3006,13 +3018,13 @@ int ha_federatedx::info(uint flag) if (flag & HA_STATUS_CONST) stats.block_size= 4096; - if (tmp_io->table_metadata(&stats, share->table_name, + if ((*iop)->table_metadata(&stats, share->table_name, share->table_name_length, flag)) goto error; } if (flag & HA_STATUS_AUTO) - stats.auto_increment_value= tmp_io->last_insert_id(); + stats.auto_increment_value= (*iop)->last_insert_id(); /* If ::info created it's own transaction, close it. This happens in case @@ -3023,10 +3035,10 @@ int ha_federatedx::info(uint flag) DBUG_RETURN(0); error: - if (tmp_io) + if (iop && *iop) { my_sprintf(error_buffer, (error_buffer, ": %d : %s", - tmp_io->error_code(), tmp_io->error_str())); + (*iop)->error_code(), (*iop)->error_str())); my_error(error_code, MYF(0), error_buffer); } else === modified file 'strings/ctype-ucs2.c' --- a/strings/ctype-ucs2.c 2009-11-30 12:42:24 +0000 +++ b/strings/ctype-ucs2.c 2009-12-03 12:02:37 +0000 @@ -1498,6 +1498,14 @@ void my_hash_sort_ucs2_bin(CHARSET_INFO } } + +static inline my_wc_t +ucs2_to_wc(const uchar *ptr) +{ + return (((uint) ptr[0]) << 8) + ptr[1]; +} + + /* ** Calculate min_str and max_str that ranges a LIKE string. ** Arguments: @@ -1531,6 +1539,7 @@ my_bool my_like_range_ucs2(CHARSET_INFO for ( ; ptr + 1 < end && min_str + 1 < min_end && charlen > 0 ; ptr+=2, charlen--) { + my_wc_t wc; if (ptr[0] == '\0' && ptr[1] == escape && ptr + 1 < end) { ptr+=2; /* Skip escape */ @@ -1567,9 +1576,9 @@ fill_max_and_min: } if (have_contractions && ptr + 3 < end && - ptr[0] == '\0' && - my_uca_can_be_contraction_head(cs, (uchar) ptr[1])) + my_uca_can_be_contraction_head(cs, (wc= ucs2_to_wc((uchar*) ptr)))) { + my_wc_t wc2; /* Contraction head found */ if (ptr[2] == '\0' && (ptr[3] == w_one || ptr[3] == w_many)) { @@ -1581,9 +1590,8 @@ fill_max_and_min: Check if the second letter can be contraction part, and if two letters really produce a contraction. */ - if (ptr[2] == '\0' && - my_uca_can_be_contraction_tail(cs, (uchar) ptr[3]) && - my_uca_contraction2_weight(cs,(uchar) ptr[1], (uchar) ptr[3])) + if (my_uca_can_be_contraction_tail(cs, (wc2= ucs2_to_wc((uchar*) ptr + 2))) && + my_uca_contraction2_weight(cs, wc , wc2)) { /* Contraction found */ if (charlen == 1 || min_str + 2 >= min_end) === modified file 'unittest/mysys/Makefile.am' --- a/unittest/mysys/Makefile.am 2009-11-26 08:44:38 +0000 +++ b/unittest/mysys/Makefile.am 2009-12-03 11:19:05 +0000 @@ -24,7 +24,7 @@ LDADD = $(top_builddir)/unittest/mytap $(top_builddir)/strings/libmystrings.a EXTRA_DIST = CMakeLists.txt -noinst_PROGRAMS = bitmap-t base64-t lf-t waiting_threads-t +noinst_PROGRAMS = bitmap-t base64-t my_atomic-t lf-t waiting_threads-t if NEED_THREAD # my_atomic-t is used to check thread functions, so it is safe to === modified file 'vio/viosslfactories.c' --- a/vio/viosslfactories.c 2009-10-27 13:20:34 +0000 +++ b/vio/viosslfactories.c 2009-12-06 17:34:54 +0000 @@ -19,7 +19,6 @@ static my_bool ssl_algorithms_added = FALSE; static my_bool ssl_error_strings_loaded= FALSE; -static int verify_depth = 0; static unsigned char dh512_p[]= {

1 0

[Maria-developers] bzr commit into MariaDB 5.1, with Maria 1.5:maria branch (knielsen:2775)
by knielsen＠knielsen-hq.org 16 Dec '09

16 Dec '09

#At lp:maria 2775 knielsen(a)knielsen-hq.org 2009-12-16 [merge] Automatic merge of PBXT rc3 into MariaDB trunk. modified: client/mysql.cc client/mysqlcheck.c client/mysqlslap.c client/mysqltest.cc cmd-line-utils/readline/config_readline.h mysql-test/lib/mtr_report.pm mysql-test/mysql-test-run.pl mysql-test/r/ctype_ucs.result mysql-test/suite/federated/disabled.def mysql-test/suite/federated/federated_server.result mysql-test/suite/federated/federated_server.test mysql-test/t/ctype_ucs.test sql-common/client.c sql/mysqld.cc sql/share/errmsg.txt sql/sql_base.cc sql/sql_class.cc sql/sql_insert.cc storage/federatedx/ha_federatedx.cc strings/ctype-uca.c strings/ctype-ucs2.c unittest/mysys/Makefile.am === modified file 'client/mysql.cc' --- a/client/mysql.cc 2009-11-30 21:37:27 +0000 +++ b/client/mysql.cc 2009-12-03 11:34:11 +0000 @@ -1280,7 +1280,6 @@ sig_handler handle_sigint(int sig) MYSQL *kill_mysql= NULL; /* terminate if no query being executed, or we already tried interrupting */ - /* terminate if no query being executed, or we already tried interrupting */ if (!executing_query || (interrupted_query == 2)) { tee_fprintf(stdout, "Ctrl-C -- exit!\n"); @@ -1295,6 +1294,7 @@ sig_handler handle_sigint(int sig) goto err; } + /* First time try to kill the query, second time the connection */ interrupted_query++; /* mysqld < 5 does not understand KILL QUERY, skip to KILL CONNECTION */ @@ -1305,10 +1305,13 @@ sig_handler handle_sigint(int sig) sprintf(kill_buffer, "KILL %s%lu", (interrupted_query == 1) ? "QUERY " : "", mysql_thread_id(&mysql)); - tee_fprintf(stdout, "Ctrl-C -- sending \"%s\" to server ...\n", kill_buffer); + if (verbose) + tee_fprintf(stdout, "Ctrl-C -- sending \"%s\" to server ...\n", + kill_buffer); mysql_real_query(kill_mysql, kill_buffer, (uint) strlen(kill_buffer)); mysql_close(kill_mysql); - tee_fprintf(stdout, "Ctrl-C -- query aborted.\n"); + tee_fprintf(stdout, "Ctrl-C -- query killed. Continuing normally.\n"); + interrupted_query= 0; return; @@ -1321,7 +1324,6 @@ err: handler called mysql_end(). */ mysql_thread_end(); - return; #else mysql_end(sig); #endif @@ -2881,13 +2883,8 @@ com_help(String *buffer __attribute__((u return com_server_help(buffer,line,help_arg); } - put_info("\nFor information about MySQL products and services, visit:\n" - " http://www.mysql.com/\n" - "For developer information, including the MySQL Reference Manual, " - "visit:\n" - " http://dev.mysql.com/\n" - "To buy MySQL Enterprise support, training, or other products, visit:\n" - " https://shop.mysql.com/\n", INFO_INFO); + put_info("\nGeneral information about MariaDB can be found at\n" + "http://askmonty.org/wiki/index.php/Manual:Contents\n", INFO_INFO); put_info("List of all MySQL commands:", INFO_INFO); if (!named_cmds) put_info("Note that all text commands must be first on line and end with ';'",INFO_INFO); === modified file 'client/mysqlcheck.c' --- a/client/mysqlcheck.c 2009-09-28 06:24:19 +0000 +++ b/client/mysqlcheck.c 2009-12-03 11:19:05 +0000 @@ -857,7 +857,8 @@ int main(int argc, char **argv) if (!opt_write_binlog) { - if (disable_binlog()) { + if (disable_binlog()) + { first_error= 1; goto end; } === modified file 'client/mysqlslap.c' --- a/client/mysqlslap.c 2009-11-30 21:37:27 +0000 +++ b/client/mysqlslap.c 2009-12-03 11:34:11 +0000 @@ -472,11 +472,10 @@ void concurrency_loop(MYSQL *mysql, uint if (commit_rate) run_query(mysql, "SET AUTOCOMMIT=0", strlen("SET AUTOCOMMIT=0")); - if (pre_system) - if ((sysret= system(pre_system)) != 0) - fprintf(stderr, - "Warning: Execution of pre_system option returned %d.\n", - sysret); + if (pre_system && (sysret= system(pre_system)) != 0) + fprintf(stderr, + "Warning: Execution of pre_system option returned %d.\n", + sysret); /* Pre statements are always run after all other logic so they can @@ -490,11 +489,10 @@ void concurrency_loop(MYSQL *mysql, uint if (post_statements) run_statements(mysql, post_statements); - if (post_system) - if ((sysret= system(post_system)) != 0) - fprintf(stderr, - "Warning: Execution of post_system option returned %d.\n", - sysret); + if (post_system && (sysret= system(post_system)) != 0) + fprintf(stderr, + "Warning: Execution of post_system option returned %d.\n", + sysret); /* We are finished with this run */ if (auto_generate_sql_autoincrement || auto_generate_sql_guid_primary) drop_primary_key_list(); === modified file 'client/mysqltest.cc' --- a/client/mysqltest.cc 2009-11-16 20:49:51 +0000 +++ b/client/mysqltest.cc 2009-12-03 11:19:05 +0000 @@ -3497,9 +3497,10 @@ void do_diff_files(struct st_command *co if ((error= compare_files(ds_filename.str, ds_filename2.str)) && match_expected_error(command, error, NULL) < 0) { - /* Compare of the two files failed, append them to output - so the failure can be analyzed, but only if it was not - expected to fail. + /* + Compare of the two files failed, append them to output + so the failure can be analyzed, but only if it was not + expected to fail. */ show_diff(&ds_res, ds_filename.str, ds_filename2.str); log_file.write(&ds_res); @@ -5013,7 +5014,8 @@ void do_connect(struct st_command *comma con_options= ds_options.str; while (*con_options) { - char* end; + size_t length; + char *end; /* Step past any spaces in beginning of option*/ while (*con_options && my_isspace(charset_info, *con_options)) con_options++; @@ -5021,13 +5023,14 @@ void do_connect(struct st_command *comma end= con_options; while (*end && !my_isspace(charset_info, *end)) end++; - if (!strncmp(con_options, "SSL", 3)) + length= (size_t) (end - con_options); + if (length == 3 && !strncmp(con_options, "SSL", 3)) con_ssl= 1; - else if (!strncmp(con_options, "COMPRESS", 8)) + else if (length == 8 && !strncmp(con_options, "COMPRESS", 8)) con_compress= 1; - else if (!strncmp(con_options, "PIPE", 4)) + else if (length == 4 && !strncmp(con_options, "PIPE", 4)) con_pipe= 1; - else if (!strncmp(con_options, "SHM", 3)) + else if (length == 3 && !strncmp(con_options, "SHM", 3)) con_shm= 1; else die("Illegal option to connect: %.*s", @@ -5096,14 +5099,13 @@ void do_connect(struct st_command *comma mysql_options(&con_slot->mysql, MYSQL_SHARED_MEMORY_BASE_NAME, ds_shm.str); mysql_options(&con_slot->mysql, MYSQL_OPT_PROTOCOL, &protocol); } - else if(shared_memory_base_name) + else if (shared_memory_base_name) { mysql_options(&con_slot->mysql, MYSQL_SHARED_MEMORY_BASE_NAME, - shared_memory_base_name); + shared_memory_base_name); } #endif - /* Use default db name */ if (ds_database.length == 0) dynstr_set(&ds_database, opt_db); @@ -6879,10 +6881,8 @@ void run_query_stmt(MYSQL *mysql, struct MYSQL_STMT *stmt; DYNAMIC_STRING ds_prepare_warnings; DYNAMIC_STRING ds_execute_warnings; - ulonglong affected_rows; DBUG_ENTER("run_query_stmt"); DBUG_PRINT("query", ("'%-.60s'", query)); - LINT_INIT(affected_rows); /* Init a new stmt if it's not already one created for this connection @@ -6981,6 +6981,9 @@ void run_query_stmt(MYSQL *mysql, struct handle_no_error(command); if (!disable_result_log) { + ulonglong affected_rows; + LINT_INIT(affected_rows); + /* Not all statements creates a result set. If there is one we can now create another normal result set that contains the meta @@ -7026,39 +7029,33 @@ void run_query_stmt(MYSQL *mysql, struct Need to grab affected rows information before getting warnings here */ - { - ulonglong affected_rows; - LINT_INIT(affected_rows); + if (!disable_info) + affected_rows= mysql_affected_rows(mysql); - if (!disable_info) - affected_rows= mysql_affected_rows(mysql); + if (!disable_warnings) + { + /* Get the warnings from execute */ - if (!disable_warnings) + /* Append warnings to ds - if there are any */ + if (append_warnings(&ds_execute_warnings, mysql) || + ds_execute_warnings.length || + ds_prepare_warnings.length || + ds_warnings->length) { - /* Get the warnings from execute */ - - /* Append warnings to ds - if there are any */ - if (append_warnings(&ds_execute_warnings, mysql) || - ds_execute_warnings.length || - ds_prepare_warnings.length || - ds_warnings->length) - { - dynstr_append_mem(ds, "Warnings:\n", 10); - if (ds_warnings->length) - dynstr_append_mem(ds, ds_warnings->str, - ds_warnings->length); - if (ds_prepare_warnings.length) - dynstr_append_mem(ds, ds_prepare_warnings.str, - ds_prepare_warnings.length); - if (ds_execute_warnings.length) - dynstr_append_mem(ds, ds_execute_warnings.str, - ds_execute_warnings.length); - } + dynstr_append_mem(ds, "Warnings:\n", 10); + if (ds_warnings->length) + dynstr_append_mem(ds, ds_warnings->str, + ds_warnings->length); + if (ds_prepare_warnings.length) + dynstr_append_mem(ds, ds_prepare_warnings.str, + ds_prepare_warnings.length); + if (ds_execute_warnings.length) + dynstr_append_mem(ds, ds_execute_warnings.str, + ds_execute_warnings.length); } - - if (!disable_info) - append_info(ds, affected_rows, mysql_info(mysql)); } + if (!disable_info) + append_info(ds, affected_rows, mysql_info(mysql)); } end: @@ -7235,7 +7232,6 @@ void run_query(struct st_connection *cn, } dynstr_free(&query_str); - } if (sp_protocol_enabled && @@ -7662,6 +7658,7 @@ int main(int argc, char **argv) my_bool q_send_flag= 0, abort_flag= 0; uint command_executed= 0, last_command_executed= 0; char save_file[FN_REFLEN]; + bool empty_result= FALSE; MY_INIT(argv[0]); save_file[0]= 0; @@ -7819,6 +7816,7 @@ int main(int argc, char **argv) verbose_msg("Start processing test commands from '%s' ...", cur_file->file_name); while (!read_command(&command) && !abort_flag) { + my_bool ok_to_do; int current_line_inc = 1, processed = 0; if (command->type == Q_UNKNOWN || command->type == Q_COMMENT_WITH_COMMAND) get_command_type(command); @@ -7831,7 +7829,7 @@ int main(int argc, char **argv) command->type= Q_COMMENT; } - my_bool ok_to_do= cur_block->ok; + ok_to_do= cur_block->ok; /* Some commands need to be "done" the first time if they may get re-iterated over in a true context. This can only happen if there's @@ -8167,8 +8165,6 @@ int main(int argc, char **argv) if (parsing_disabled) die("Test ended with parsing disabled"); - my_bool empty_result= FALSE; - /* The whole test has been executed _sucessfully_. Time to compare result or save it to record file. === modified file 'cmd-line-utils/readline/config_readline.h' --- a/cmd-line-utils/readline/config_readline.h 2009-11-30 21:37:27 +0000 +++ b/cmd-line-utils/readline/config_readline.h 2009-12-01 16:09:02 +0000 @@ -7,6 +7,13 @@ # include <config.h> #endif +#ifdef NOT_YET /* causes problem on MacOSX */ +/* to get wcwidth() defined */ +#define _XOPEN_SOURCE 600 +#define _XOPEN_SOURCE_EXTENDED +#define _XOPEN_ +#endif + /* Ultrix botches type-ahead when switching from canonical to non-canonical mode, at least through version 4.3 === modified file 'mysql-test/lib/mtr_report.pm' --- a/mysql-test/lib/mtr_report.pm 2009-11-16 20:49:51 +0000 +++ b/mysql-test/lib/mtr_report.pm 2009-12-03 11:19:05 +0000 @@ -388,7 +388,7 @@ MSG } elsif (@$extra_warnings) { - mtr_error("There were errors/warnings in server logs after running test cases."); + mtr_error("There where errors/warnings in server logs after running test cases."); } elsif ($fail) { === modified file 'mysql-test/mysql-test-run.pl' --- a/mysql-test/mysql-test-run.pl 2009-11-30 21:37:27 +0000 +++ b/mysql-test/mysql-test-run.pl 2009-12-03 11:34:11 +0000 @@ -201,10 +201,10 @@ my $opt_mark_progress; my $opt_sleep; -my $opt_testcase_timeout= 15; # minutes -my $opt_suite_timeout = 300; # minutes -my $opt_shutdown_timeout= 10; # seconds -my $opt_start_timeout = 180; # seconds +my $opt_testcase_timeout= 15; # 15 minutes +my $opt_suite_timeout = 360; # 6 hours +my $opt_shutdown_timeout= 10; # 10 seconds +my $opt_start_timeout = 180; # 180 seconds sub testcase_timeout { return $opt_testcase_timeout * 60; }; sub suite_timeout { return $opt_suite_timeout * 60; }; @@ -1319,6 +1319,8 @@ sub command_line_setup { { # Indicate that we are using debugger $glob_debugger= 1; + $opt_testcase_timeout= 60*60*24; # Don't abort debugging with timeout + $opt_suite_timeout= $opt_testcase_timeout; $opt_retry= 1; $opt_retry_failure= 1; @@ -2151,7 +2153,6 @@ sub environment_setup { # Create an environment variable to make it possible # to detect that valgrind is being used from test cases $ENV{'VALGRIND_TEST'}= $opt_valgrind; - } @@ -2908,8 +2909,8 @@ sub mysql_install_db { my $bootstrap_sql_file= "$opt_vardir/tmp/bootstrap.sql"; my $path_sql= my_find_file($install_basedir, - ["mysql", "sql/share", "share/mysql", - "share/mariadb", "share", "scripts"], + ["mysql", "sql/share", "share/mariadb", + "share/mysql", "share", "scripts"], "mysql_system_tables.sql", NOT_REQUIRED); @@ -3861,7 +3862,7 @@ sub extract_server_log ($$) { my ($error_log, $tname) = @_; # Open the servers .err log file and read all lines - # belonging to current tets into @lines + # belonging to current test into @lines my $Ferr = IO::File->new($error_log) or mtr_error("Could not open file '$error_log' for reading: $!"); === modified file 'mysql-test/r/ctype_ucs.result' --- a/mysql-test/r/ctype_ucs.result 2008-12-23 14:21:01 +0000 +++ b/mysql-test/r/ctype_ucs.result 2009-12-03 12:02:37 +0000 @@ -1211,3 +1211,47 @@ HEX(DAYNAME(19700101)) 0427043504420432043504400433 SET character_set_connection=latin1; End of 5.0 tests +Start of 5.1 tests +SET NAMES utf8; +CREATE TABLE t1 ( +a varchar(10) CHARACTER SET ucs2 COLLATE ucs2_czech_ci, +key(a) +); +INSERT INTO t1 VALUES +('aa'),('bb'),('cc'),('dd'),('ee'),('ff'),('gg'),('hh'),('ii'), +('jj'),('kk'),('ll'),('mm'),('nn'),('oo'),('pp'),('rr'),('ss'), +('tt'),('uu'),('vv'),('ww'),('xx'),('yy'),('zz'); +INSERT INTO t1 VALUES ('ca'),('cz'),('ch'); +INSERT INTO t1 VALUES ('da'),('dz'), (X'0064017E'); +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'b%'; +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 1 Using where; Using index +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'c%'; +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 30 Using where; Using index +SELECT * FROM t1 WHERE a LIKE 'c%'; +a +ca +cc +cz +ch +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'ch%'; +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 1 Using where; Using index +SELECT * FROM t1 WHERE a LIKE 'ch%'; +a +ch +ALTER TABLE t1 MODIFY a VARCHAR(10) CHARACTER SET ucs2 COLLATE ucs2_croatian_ci; +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'd%'; +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 1 Using where; Using index +SELECT hex(concat('d',_ucs2 0x017E,'%')); +hex(concat('d',_ucs2 0x017E,'%')) +0064017E0025 +EXPLAIN SELECT * FROM t1 WHERE a LIKE concat('d',_ucs2 0x017E,'%'); +id select_type table type possible_keys key key_len ref rows Extra +1 SIMPLE t1 range a a 23 NULL 1 Using where; Using index +SELECT hex(a) FROM t1 WHERE a LIKE concat('D',_ucs2 0x017E,'%'); +hex(a) +0064017E +DROP TABLE t1; === modified file 'mysql-test/suite/federated/disabled.def' --- a/mysql-test/suite/federated/disabled.def 2009-10-30 18:50:56 +0000 +++ b/mysql-test/suite/federated/disabled.def 2009-11-14 19:33:59 +0000 @@ -9,5 +9,4 @@ # Do not use any TAB characters for whitespace. # ############################################################################## -federated_server : needs fixup === modified file 'mysql-test/suite/federated/federated_server.result' --- a/mysql-test/suite/federated/federated_server.result 2009-10-30 18:50:56 +0000 +++ b/mysql-test/suite/federated/federated_server.result 2009-11-14 19:33:59 +0000 @@ -175,6 +175,8 @@ CREATE TABLE db_bogus.t1 ( ) ; INSERT INTO db_bogus.t1 VALUES ('2','this is bogus'); +create user test_fed@localhost identified by 'foo'; +grant all on db_legitimate.* to test_fed@localhost; create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', @@ -211,15 +213,14 @@ id name alter server s1 options (database 'db_bogus'); flush tables; select * from federated.t1; -id name -2 this is bogus +ERROR HY000: There was a problem processing the query on the foreign data source. Data source error: : 1044 : Access denied for user 'test_fed'@'localhost' to databa drop server if exists 's1'; ERROR 42000: Access denied; you need the SUPER privilege for this operation create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', -USER 'root', -PASSWORD '', +USER 'test_fed', +PASSWORD 'foo', PORT SLAVE_PORT, SOCKET '', OWNER 'root'); @@ -228,8 +229,8 @@ drop server 's1'; create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', -USER 'root', -PASSWORD '', +USER 'test_fed', +PASSWORD 'foo', PORT SLAVE_PORT, SOCKET '', OWNER 'root'); @@ -237,6 +238,7 @@ flush tables; select * from federated.t1; id name 1 this is legitimate +drop user test_fed@localhost; drop database db_legitimate; drop database db_bogus; drop user guest_super@localhost; @@ -275,6 +277,6 @@ call p1(); drop procedure p1; drop server if exists s; DROP TABLE IF EXISTS federated.t1; -DROP DATABASE federated; +DROP DATABASE IF EXISTS federated; DROP TABLE IF EXISTS federated.t1; -DROP DATABASE federated; +DROP DATABASE IF EXISTS federated; === modified file 'mysql-test/suite/federated/federated_server.test' --- a/mysql-test/suite/federated/federated_server.test 2009-10-30 18:50:56 +0000 +++ b/mysql-test/suite/federated/federated_server.test 2009-11-14 19:33:59 +0000 @@ -239,6 +239,7 @@ alter server s1 options (database 'db_bo connection master; flush tables; +--error ER_QUERY_ON_FOREIGN_DATA_SOURCE select * from federated.t1; connection conn_select; @@ -249,8 +250,8 @@ drop server if exists 's1'; eval create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', - USER 'root', - PASSWORD '', + USER 'test_fed', + PASSWORD 'foo', PORT $SLAVE_MYPORT, SOCKET '', OWNER 'root'); @@ -261,8 +262,8 @@ drop server 's1'; eval create server 's1' foreign data wrapper 'mysql' options (HOST '127.0.0.1', DATABASE 'db_legitimate', - USER 'root', - PASSWORD '', + USER 'test_fed', + PASSWORD 'foo', PORT $SLAVE_MYPORT, SOCKET '', OWNER 'root'); @@ -273,6 +274,7 @@ select * from federated.t1; # clean up test connection slave; +drop user test_fed@localhost; drop database db_legitimate; drop database db_bogus; === modified file 'mysql-test/t/ctype_ucs.test' --- a/mysql-test/t/ctype_ucs.test 2008-12-23 14:21:01 +0000 +++ b/mysql-test/t/ctype_ucs.test 2009-12-03 12:02:37 +0000 @@ -723,3 +723,34 @@ SELECT HEX(DAYNAME(19700101)); SET character_set_connection=latin1; --echo End of 5.0 tests + + +--echo Start of 5.1 tests +# +# Checking my_like_range_ucs2 +# +SET NAMES utf8; +CREATE TABLE t1 ( + a varchar(10) CHARACTER SET ucs2 COLLATE ucs2_czech_ci, + key(a) +); +INSERT INTO t1 VALUES +('aa'),('bb'),('cc'),('dd'),('ee'),('ff'),('gg'),('hh'),('ii'), +('jj'),('kk'),('ll'),('mm'),('nn'),('oo'),('pp'),('rr'),('ss'), +('tt'),('uu'),('vv'),('ww'),('xx'),('yy'),('zz'); +INSERT INTO t1 VALUES ('ca'),('cz'),('ch'); +INSERT INTO t1 VALUES ('da'),('dz'), (X'0064017E'); +# This one should scan only one row +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'b%'; +# This one should scan many rows: 'c' is a contraction head +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'c%'; +SELECT * FROM t1 WHERE a LIKE 'c%'; +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'ch%'; +SELECT * FROM t1 WHERE a LIKE 'ch%'; +ALTER TABLE t1 MODIFY a VARCHAR(10) CHARACTER SET ucs2 COLLATE ucs2_croatian_ci; +EXPLAIN SELECT * FROM t1 WHERE a LIKE 'd%'; +SELECT hex(concat('d',_ucs2 0x017E,'%')); +EXPLAIN SELECT * FROM t1 WHERE a LIKE concat('d',_ucs2 0x017E,'%'); +SELECT hex(a) FROM t1 WHERE a LIKE concat('D',_ucs2 0x017E,'%'); + +DROP TABLE t1; === modified file 'sql-common/client.c' --- a/sql-common/client.c 2009-11-16 20:49:51 +0000 +++ b/sql-common/client.c 2009-12-03 15:26:54 +0000 @@ -3208,7 +3208,7 @@ const char * STDCALL mysql_error(MYSQL * mysql Connection EXAMPLE - 4.1.0-alfa -> 40100 + MariaDB-4.1.0-alfa -> 40100 NOTES We will ensure that a newer server always has a bigger number. @@ -3221,7 +3221,11 @@ ulong STDCALL mysql_get_server_version(MYSQL *mysql) { uint major, minor, version; - char *pos= mysql->server_version, *end_pos; + const char *pos= mysql->server_version; + char *end_pos; + /* Skip possible prefix */ + while (*pos && !my_isdigit(&my_charset_latin1, *pos)) + pos++; major= (uint) strtoul(pos, &end_pos, 10); pos=end_pos+1; minor= (uint) strtoul(pos, &end_pos, 10); pos=end_pos+1; version= (uint) strtoul(pos, &end_pos, 10); === modified file 'sql/mysqld.cc' --- a/sql/mysqld.cc 2009-11-30 21:37:27 +0000 +++ b/sql/mysqld.cc 2009-12-04 15:12:22 +0000 @@ -4169,8 +4169,10 @@ server."); Need to unlock as global_system_variables.table_plugin was acquired during plugin_init() */ + pthread_mutex_lock(&LOCK_global_system_variables); plugin_unlock(0, global_system_variables.table_plugin); global_system_variables.table_plugin= plugin; + pthread_mutex_unlock(&LOCK_global_system_variables); } } #if defined(WITH_MARIA_STORAGE_ENGINE) && defined(USE_MARIA_FOR_TMP_TABLES) === modified file 'sql/share/errmsg.txt' --- a/sql/share/errmsg.txt 2009-11-16 20:49:51 +0000 +++ b/sql/share/errmsg.txt 2009-12-04 15:12:22 +0000 @@ -5322,8 +5322,8 @@ ER_DIVISION_BY_ZERO 22012 eng "Division by 0" ger "Division durch 0" ER_TRUNCATED_WRONG_VALUE_FOR_FIELD - eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld" - ger "Falscher %-.32s-Wert: '%-.128s' f�d '%.192s' in Zeile %ld" + eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %lu" + ger "Falscher %-.32s-Wert: '%-.128s' f�d '%.192s' in Zeile %lu" ER_ILLEGAL_VALUE_FOR_TYPE 22007 eng "Illegal %s '%-.192s' value found during parsing" ger "Nicht zul�iger %s-Wert '%-.192s' beim Parsen gefunden" === modified file 'sql/sql_base.cc' --- a/sql/sql_base.cc 2009-11-30 21:37:27 +0000 +++ b/sql/sql_base.cc 2009-12-04 15:12:22 +0000 @@ -8488,19 +8488,26 @@ bool remove_table_from_cache(THD *thd, c result=1; } /* Kill delayed insert threads */ - if ((in_use->system_thread & SYSTEM_THREAD_DELAYED_INSERT) && - ! in_use->killed) + if ((in_use->system_thread & SYSTEM_THREAD_DELAYED_INSERT)) { - in_use->killed= THD::KILL_CONNECTION; - pthread_mutex_lock(&in_use->mysys_var->mutex); - if (in_use->mysys_var->current_cond) - { - pthread_mutex_lock(in_use->mysys_var->current_mutex); - signalled= 1; - pthread_cond_broadcast(in_use->mysys_var->current_cond); - pthread_mutex_unlock(in_use->mysys_var->current_mutex); - } - pthread_mutex_unlock(&in_use->mysys_var->mutex); + if (!in_use->killed) + { + in_use->killed= THD::KILL_CONNECTION; + pthread_mutex_lock(&in_use->mysys_var->mutex); + if (in_use->mysys_var->current_cond) + { + pthread_mutex_lock(in_use->mysys_var->current_mutex); + signalled= 1; + pthread_cond_broadcast(in_use->mysys_var->current_cond); + pthread_mutex_unlock(in_use->mysys_var->current_mutex); + } + pthread_mutex_unlock(&in_use->mysys_var->mutex); + } + /* + Don't abort locks. Instead give the delayed insert thread + time to finish it's inserts and die gracefully. + */ + continue; } /* Now we must abort all tables locks used by this thread === modified file 'sql/sql_class.cc' --- a/sql/sql_class.cc 2009-11-30 21:37:27 +0000 +++ b/sql/sql_class.cc 2009-12-04 15:12:22 +0000 @@ -2046,7 +2046,7 @@ bool select_export::send_data(List<Item> ER_TRUNCATED_WRONG_VALUE_FOR_FIELD, ER(ER_TRUNCATED_WRONG_VALUE_FOR_FIELD), "string", printable_buff, - item->name, row_count); + item->name, (ulong) row_count); } cvt_str.length(bytes); res= &cvt_str; === modified file 'sql/sql_insert.cc' --- a/sql/sql_insert.cc 2009-11-30 21:37:27 +0000 +++ b/sql/sql_insert.cc 2009-12-04 15:12:22 +0000 @@ -2618,7 +2618,7 @@ bool Delayed_insert::handle_inserts(void or if another thread is removing the current table definition from the table cache. */ - my_error(ER_DELAYED_CANT_CHANGE_LOCK,MYF(ME_FATALERROR), + my_error(ER_DELAYED_CANT_CHANGE_LOCK, MYF(ME_FATALERROR | ME_NOREFRESH), table->s->table_name.str); goto err; } @@ -2791,10 +2791,11 @@ bool Delayed_insert::handle_inserts(void query_cache_invalidate3(&thd, table, 1); if (thr_reschedule_write_lock(*thd.lock->locks)) { - /* This is not known to happen. */ - my_error(ER_DELAYED_CANT_CHANGE_LOCK,MYF(ME_FATALERROR), - table->s->table_name.str); - goto err; + /* This is not known to happen. */ + my_error(ER_DELAYED_CANT_CHANGE_LOCK, + MYF(ME_FATALERROR | ME_NOREFRESH), + table->s->table_name.str); + goto err; } if (!using_bin_log) table->file->extra(HA_EXTRA_WRITE_CACHE); === modified file 'storage/federatedx/ha_federatedx.cc' --- a/storage/federatedx/ha_federatedx.cc 2009-11-30 21:37:27 +0000 +++ b/storage/federatedx/ha_federatedx.cc 2009-12-03 11:34:11 +0000 @@ -1,5 +1,5 @@ /* -Copyright (c) 2008, Patrick Galbraith +Copyright (c) 2008-2009, Patrick Galbraith & Antony Curtis All rights reserved. Redistribution and use in source and binary forms, with or without @@ -308,7 +308,7 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE */ -#define MYSQL_SERVER 1q +#define MYSQL_SERVER 1 #include "mysql_priv.h" #include <mysql/plugin.h> @@ -1627,7 +1627,13 @@ static int free_server(federatedx_txn *t { MEM_ROOT mem_root; - txn->close(server); + if (!txn) + { + federatedx_txn tmp_txn; + tmp_txn.close(server); + } + else + txn->close(server); DBUG_ASSERT(server->io_count == 0); @@ -1785,21 +1791,25 @@ int ha_federatedx::close(void) if (stored_result) retval= free_result(); - /* Disconnect from mysql. thd may be null during refresh */ - txn= thd ? get_txn(thd, true) : new federatedx_txn(); + /* Disconnect from mysql */ + if (!thd || !(txn= get_txn(thd, true))) + { + federatedx_txn tmp_txn; + + tmp_txn.release(&io); - if (txn) + DBUG_ASSERT(io == NULL); + + if ((error= free_share(&tmp_txn, share))) + retval= error; + } + else { txn->release(&io); - DBUG_ASSERT(io == NULL); if ((error= free_share(txn, share))) retval= error; - - if (!thd) - delete txn; - } DBUG_RETURN(retval); } @@ -2793,14 +2803,16 @@ int ha_federatedx::rnd_end() int ha_federatedx::free_result() { int error; + federatedx_io *tmp_io= 0, **iop; DBUG_ASSERT(stored_result); - if ((error= txn->acquire(share, FALSE, &io))) + if (!*(iop= &io) && (error= txn->acquire(share, TRUE, (iop= &tmp_io)))) { DBUG_ASSERT(0); // Fail when testing return error; } - io->free_result(stored_result); + (*iop)->free_result(stored_result); stored_result= 0; + txn->release(&tmp_io); return 0; } @@ -2985,7 +2997,7 @@ int ha_federatedx::info(uint flag) { char error_buffer[FEDERATEDX_QUERY_BUFFER_SIZE]; uint error_code; - federatedx_io *tmp_io= 0; + federatedx_io *tmp_io= 0, **iop= 0; DBUG_ENTER("ha_federatedx::info"); error_code= ER_QUERY_ON_FOREIGN_DATA_SOURCE; @@ -2993,7 +3005,7 @@ int ha_federatedx::info(uint flag) /* we want not to show table status if not needed to do so */ if (flag & (HA_STATUS_VARIABLE | HA_STATUS_CONST | HA_STATUS_AUTO)) { - if ((error_code= txn->acquire(share, TRUE, &tmp_io))) + if (!*(iop= &io) && (error_code= txn->acquire(share, TRUE, (iop= &tmp_io)))) goto fail; } @@ -3006,13 +3018,13 @@ int ha_federatedx::info(uint flag) if (flag & HA_STATUS_CONST) stats.block_size= 4096; - if (tmp_io->table_metadata(&stats, share->table_name, + if ((*iop)->table_metadata(&stats, share->table_name, share->table_name_length, flag)) goto error; } if (flag & HA_STATUS_AUTO) - stats.auto_increment_value= tmp_io->last_insert_id(); + stats.auto_increment_value= (*iop)->last_insert_id(); /* If ::info created it's own transaction, close it. This happens in case @@ -3023,10 +3035,10 @@ int ha_federatedx::info(uint flag) DBUG_RETURN(0); error: - if (tmp_io) + if (iop && *iop) { my_sprintf(error_buffer, (error_buffer, ": %d : %s", - tmp_io->error_code(), tmp_io->error_str())); + (*iop)->error_code(), (*iop)->error_str())); my_error(error_code, MYF(0), error_buffer); } else === modified file 'strings/ctype-uca.c' --- a/strings/ctype-uca.c 2009-11-30 12:42:24 +0000 +++ b/strings/ctype-uca.c 2009-12-03 11:34:11 +0000 @@ -36,6 +36,12 @@ #include "m_string.h" #include "m_ctype.h" + +#define MY_UCA_CNT_FLAG_SIZE 4096 +#define MY_UCA_CNT_FLAG_MASK 4095 +#define MY_UCA_CNT_HEAD 1 +#define MY_UCA_CNT_TAIL 2 + #ifdef HAVE_UCA_COLLATIONS #define MY_UCA_NPAGES 256 @@ -6756,16 +6762,6 @@ typedef struct my_uca_scanner_handler_st static uint16 nochar[]= {0,0}; - -#define MY_UCA_CNT_FLAG_SIZE 4096 -#define MY_UCA_CNT_FLAG_MASK 4095 - -#define MY_UCA_CNT_HEAD 1 -#define MY_UCA_CNT_TAIL 2 - - - - /********** Helper functions to handle contraction ************/ @@ -6836,85 +6832,6 @@ my_uca_alloc_contractions(CHARSET_INFO * return 0; } - -/** - Check if UCA data has contractions (public version) - - @cs Pointer to CHARSET_INFO data - @retval 0 - no contraction, 1 - have contractions. -*/ - -my_bool -my_uca_have_contractions(CHARSET_INFO *cs) -{ - return cs->contractions != NULL; -} - - -/** - Check if a character can be contraction head - - @cs Pointer to CHARSET_INFO data - @wc Code point - - @retval 0 - cannot be contraction head - @retval 1 - can be contraction head -*/ - -my_bool -my_uca_can_be_contraction_head(CHARSET_INFO *cs, my_wc_t wc) -{ - return cs->contractions->flags[wc & MY_UCA_CNT_FLAG_MASK] & MY_UCA_CNT_HEAD; -} - - -/** - Check if a character can be contraction tail - - @cs Pointer to CHARSET_INFO data - @wc Code point - - @retval 0 - cannot be contraction tail - @retval 1 - can be contraction tail -*/ - -my_bool -my_uca_can_be_contraction_tail(CHARSET_INFO *cs, my_wc_t wc) -{ - return cs->contractions->flags[wc & MY_UCA_CNT_FLAG_MASK] & MY_UCA_CNT_TAIL; -} - - -/** - Find a contraction and return its weight array - - @cs Pointer to CHARSET data - @wc1 First character - @wc2 Second character - - @return Weight array - @retval NULL - no contraction found - @retval ptr - contraction weight array -*/ - -uint16 * -my_uca_contraction2_weight(CHARSET_INFO *cs, my_wc_t wc1, my_wc_t wc2) -{ - MY_CONTRACTIONS *list= cs->contractions; - MY_CONTRACTION *c, *last; - for (c= list->item, last= &list->item[list->nitems]; c < last; c++) - { - if (c->ch[0] == wc1 && c->ch[1] == wc2) - { - return c->weight; - } - } - return NULL; -} - - - - #ifdef HAVE_CHARSET_ucs2 /* Initialize collation weight scanner @@ -9607,3 +9524,78 @@ CHARSET_INFO my_charset_utf8_croatian_uc #endif /* HAVE_CHARSET_utf8 */ #endif /* HAVE_UCA_COLLATIONS */ + +/** + Check if UCA data has contractions (public version) + + @cs Pointer to CHARSET_INFO data + @retval 0 - no contraction, 1 - have contractions. +*/ + +my_bool +my_uca_have_contractions(CHARSET_INFO *cs) +{ + return cs->contractions != NULL; +} + +/** + Check if a character can be contraction head + + @cs Pointer to CHARSET_INFO data + @wc Code point + + @retval 0 - cannot be contraction head + @retval 1 - can be contraction head +*/ + +my_bool +my_uca_can_be_contraction_head(CHARSET_INFO *cs, my_wc_t wc) +{ + return cs->contractions->flags[wc & MY_UCA_CNT_FLAG_MASK] & MY_UCA_CNT_HEAD; +} + + +/** + Check if a character can be contraction tail + + @cs Pointer to CHARSET_INFO data + @wc Code point + + @retval 0 - cannot be contraction tail + @retval 1 - can be contraction tail +*/ + +my_bool +my_uca_can_be_contraction_tail(CHARSET_INFO *cs, my_wc_t wc) +{ + return cs->contractions->flags[wc & MY_UCA_CNT_FLAG_MASK] & MY_UCA_CNT_TAIL; +} + + +/** + Find a contraction and return its weight array + + @cs Pointer to CHARSET data + @wc1 First character + @wc2 Second character + + @return Weight array + @retval NULL - no contraction found + @retval ptr - contraction weight array +*/ + +uint16 * +my_uca_contraction2_weight(CHARSET_INFO *cs, my_wc_t wc1, my_wc_t wc2) +{ + MY_CONTRACTIONS *list= cs->contractions; + MY_CONTRACTION *c, *last; + for (c= list->item, last= &list->item[list->nitems]; c < last; c++) + { + if (c->ch[0] == wc1 && c->ch[1] == wc2) + { + return c->weight; + } + } + return NULL; +} + === modified file 'strings/ctype-ucs2.c' --- a/strings/ctype-ucs2.c 2009-11-30 12:42:24 +0000 +++ b/strings/ctype-ucs2.c 2009-12-03 12:02:37 +0000 @@ -1498,6 +1498,14 @@ void my_hash_sort_ucs2_bin(CHARSET_INFO } } + +static inline my_wc_t +ucs2_to_wc(const uchar *ptr) +{ + return (((uint) ptr[0]) << 8) + ptr[1]; +} + + /* ** Calculate min_str and max_str that ranges a LIKE string. ** Arguments: @@ -1531,6 +1539,7 @@ my_bool my_like_range_ucs2(CHARSET_INFO for ( ; ptr + 1 < end && min_str + 1 < min_end && charlen > 0 ; ptr+=2, charlen--) { + my_wc_t wc; if (ptr[0] == '\0' && ptr[1] == escape && ptr + 1 < end) { ptr+=2; /* Skip escape */ @@ -1567,9 +1576,9 @@ fill_max_and_min: } if (have_contractions && ptr + 3 < end && - ptr[0] == '\0' && - my_uca_can_be_contraction_head(cs, (uchar) ptr[1])) + my_uca_can_be_contraction_head(cs, (wc= ucs2_to_wc((uchar*) ptr)))) { + my_wc_t wc2; /* Contraction head found */ if (ptr[2] == '\0' && (ptr[3] == w_one || ptr[3] == w_many)) { @@ -1581,9 +1590,8 @@ fill_max_and_min: Check if the second letter can be contraction part, and if two letters really produce a contraction. */ - if (ptr[2] == '\0' && - my_uca_can_be_contraction_tail(cs, (uchar) ptr[3]) && - my_uca_contraction2_weight(cs,(uchar) ptr[1], (uchar) ptr[3])) + if (my_uca_can_be_contraction_tail(cs, (wc2= ucs2_to_wc((uchar*) ptr + 2))) && + my_uca_contraction2_weight(cs, wc , wc2)) { /* Contraction found */ if (charlen == 1 || min_str + 2 >= min_end) === modified file 'unittest/mysys/Makefile.am' --- a/unittest/mysys/Makefile.am 2009-11-26 08:44:38 +0000 +++ b/unittest/mysys/Makefile.am 2009-12-03 11:19:05 +0000 @@ -24,7 +24,7 @@ LDADD = $(top_builddir)/unittest/mytap $(top_builddir)/strings/libmystrings.a EXTRA_DIST = CMakeLists.txt -noinst_PROGRAMS = bitmap-t base64-t lf-t waiting_threads-t +noinst_PROGRAMS = bitmap-t base64-t my_atomic-t lf-t waiting_threads-t if NEED_THREAD # my_atomic-t is used to check thread functions, so it is safe to

1 0

[Maria-developers] Rev 2737: Add ds_mrr.cc to CMakeLists.txt in file:///home/psergey/dev/maria-5.2-dsmrr/
by Sergey Petrunya 15 Dec '09

15 Dec '09

At file:///home/psergey/dev/maria-5.2-dsmrr/ ------------------------------------------------------------ revno: 2737 revision-id: psergey(a)askmonty.org-20091215223739-f6xymmvanylqlrg9 parent: psergey(a)askmonty.org-20091215213555-h15367vp2hjei1da committer: Sergey Petrunya <psergey(a)askmonty.org> branch nick: maria-5.2-dsmrr timestamp: Wed 2009-12-16 01:37:39 +0300 message: Add ds_mrr.cc to CMakeLists.txt === modified file 'libmysqld/CMakeLists.txt' --- a/libmysqld/CMakeLists.txt 2009-10-03 19:24:13 +0000 +++ b/libmysqld/CMakeLists.txt 2009-12-15 22:37:39 +0000 @@ -137,6 +137,7 @@ ../sql/time.cc ../sql/tztime.cc ../sql/uniques.cc ../sql/unireg.cc ../sql/partition_info.cc ../sql/sql_connect.cc ../sql/scheduler.cc ../sql/event_parse_data.cc + ../sql/ds_mrr.cc ${GEN_SOURCES} ${LIB_SOURCES}) === modified file 'sql/CMakeLists.txt' --- a/sql/CMakeLists.txt 2009-09-15 10:46:35 +0000 +++ b/sql/CMakeLists.txt 2009-12-15 22:37:39 +0000 @@ -76,6 +76,7 @@ rpl_rli.cc rpl_mi.cc sql_servers.cc sql_connect.cc scheduler.cc sql_profile.cc event_parse_data.cc opt_table_elimination.cc + ds_mrr.cc ${PROJECT_SOURCE_DIR}/sql/sql_yacc.cc ${PROJECT_SOURCE_DIR}/sql/sql_yacc.h ${PROJECT_SOURCE_DIR}/include/mysqld_error.h

1 0

[Maria-developers] Rev 2736: Fix compile failure in file:///home/psergey/dev/maria-5.2-dsmrr/
by Sergey Petrunya 15 Dec '09

15 Dec '09

At file:///home/psergey/dev/maria-5.2-dsmrr/ ------------------------------------------------------------ revno: 2736 revision-id: psergey(a)askmonty.org-20091215213555-h15367vp2hjei1da parent: psergey(a)askmonty.org-20091215172355-m8gr6zzr3r8m399y committer: Sergey Petrunya <psergey(a)askmonty.org> branch nick: maria-5.2-dsmrr timestamp: Wed 2009-12-16 00:35:55 +0300 message: Fix compile failure === modified file 'sql/ds_mrr.h' --- a/sql/ds_mrr.h 2009-12-15 17:23:55 +0000 +++ b/sql/ds_mrr.h 2009-12-15 21:35:55 +0000 @@ -69,5 +69,3 @@ uint *buffer_size, COST_VECT *cost); }; -void push_index_cond(JOIN_TAB *tab, uint keyno, bool other_tbls_ok); - === modified file 'sql/sql_select.h' --- a/sql/sql_select.h 2009-12-15 17:23:55 +0000 +++ b/sql/sql_select.h 2009-12-15 21:35:55 +0000 @@ -780,4 +780,5 @@ void eliminate_tables(JOIN *join); +void push_index_cond(JOIN_TAB *tab, uint keyno, bool other_tbls_ok);

1 0