- developers - lists.mariadb.org

[Maria-developers] Question about License...
by Mateusz Matan 07 Jun '10

07 Jun '10

Welcome, We designed a custom Storage Engine (CLDB) for MySQL/MariaDB which now pass all premature tests. I wonder, how can we solve license problem... We would not share our sources, but we will just use shared library (*.so)... Which licenses should our customer who bought MariaDB with CLDB use to stay legally... If it is possible, can we use in corporation use MariaDB on GPL and just sell CLDB (storage engine) on other license (which one) ?? Thank You for Your quick reply... -- ___________________________________________________________ Mateusz Matan IT Security R&D Department, C/C++ programmer ComArch S.A., Al. Jana Pawła II 41d, 31-864 Kraków tel: (+48 12) 684 8411 e-mail: Mateusz.Matan(a)comarch.pl

1 0

Re: [Maria-developers] [Commits] Rev 2797: MWL#90, code movearound to unify merged and non-merged semi-join materialization processing in file:///home/psergey/dev/maria-5.3-subqueries-r12/
by Sergey Petrunya 07 Jun '10

07 Jun '10

Hi Monty, On Fri, Jun 04, 2010 at 05:36:59PM +0300, Michael Widenius wrote: > Note that this is not a full review, but just a quick scan of some of > the things in the commit. (One suspicious thing found...) Thanks for the feedback! Reply summary: - This commit was primarily to get a buildbot run, hence the presence of loads of commented-out old code and lack of real comments. I'll address this a bit later. - The suspicious thing confirmed and fixed. - Style suggestions followed. > >>>>> "Sergey" == Sergey Petrunya <psergey(a)askmonty.org> writes: > > <cut> > > Sergey> === modified file 'sql/item_cmpfunc.cc' > Sergey> --- a/sql/item_cmpfunc.cc 2010-05-25 06:32:15 +0000 > Sergey> +++ b/sql/item_cmpfunc.cc 2010-06-04 13:40:57 +0000 > Sergey> @@ -5733,6 +5733,8 @@ > Sergey> It's a field from an materialized semi-join. We can substitute it only > Sergey> for a field from the same semi-join. > Sergey> */ > Sergey> +#if 0 > Sergey> + psergey3:remove: > > Please don't ever use #if 0; Instead use something like: > > #ifdef LEFT_FOR_TESTING_WILL_BE_REMOVED_BY_PSERGEY_SOON > > Even better to just remove the code (after all, we can always find it > in bzr) > > <cut> > Sergey> - if (item->field->table->reginfo.join_tab >= first) > Sergey> + //if (item->field->table->reginfo.join_tab >= first) > > Same here; Don't leave the old code around > > <cut> > > Sergey> +bool join_tab_execution_startup(JOIN_TAB *tab) > Sergey> { > Sergey> + DBUG_ENTER("join_tab_execution_startup"); > Sergey> Item_in_subselect *in_subs; > > Please put DBUG_ENTER after all declarations. > (So that we have same layout in C and C++) > > <cut> > > Sergey> +#if 0 > > Replace with proper #if or remove code > <cut> > > Sergey> +++ b/sql/sql_select.cc 2010-06-04 13:40:57 +0000 > Sergey> @@ -1008,15 +1006,26 @@ > Sergey> /* > Sergey> Permorm the the optimization on fields evaluation mentioned above > Sergey> for all on expressions. > Sergey> - */ > Sergey> - for (JOIN_TAB *tab= join_tab + const_tables; tab < join_tab + tables ; tab++) > Sergey> + */ > Sergey> + > Sergey> { > Sergey> - if (*tab->on_expr_ref) > Sergey> + List_iterator<JOIN_TAB_RANGE> it(join_tab_ranges); > Sergey> + JOIN_TAB_RANGE *jt_range; > Sergey> + bool first= TRUE; > > Wouldn't it be better to set first to const_tables and then to 0 ? > > Sergey> + while ((jt_range= it++)) > Sergey> { > Sergey> + for (JOIN_TAB *tab= jt_range->start + (first ? const_tables : 0); > > If you do the above, then you can just do 'jt_range->start + first' here > > Sergey> + tab < jt_range->end; tab++) > Sergey> + { > Sergey> + if (*tab->on_expr_ref) > Sergey> + { > Sergey> + *tab->on_expr_ref= substitute_for_best_equal_field(*tab->on_expr_ref, > Sergey> + tab->cond_equal, > Sergey> + map2table); > Sergey> + (*tab->on_expr_ref)->update_used_tables(); > Sergey> + } > Sergey> + } > Sergey> + first= FALSE; > Sergey> } > Sergey> } > > A comment for the above outer loop would be nice. > (It's not obvious why only the first element in join_tab_ranges has > const tables) > > Sergey> @@ -1026,6 +1035,7 @@ > Sergey> { > Sergey> conds=new Item_int((longlong) 0,1); // Always false > Sergey> } > Sergey> + > Sergey> if (make_join_select(this, select, conds)) > Sergey> { > Sergey> zero_result_cause= > Sergey> @@ -1289,7 +1299,8 @@ > Sergey> if (need_tmp || select_distinct || group_list || order) > Sergey> { > Sergey> for (uint i = const_tables; i < tables; i++) > Sergey> - join_tab[i].table->prepare_for_position(); > Sergey> + table[i]->prepare_for_position(); > Sergey> + > > Isn't table[] in other order than join_tab? > (I thought that only join_tab has the const tables first) Right. Will fix this. > <cut> > > Sergey> +JOIN_TAB *first_linear_tab(JOIN *join, bool after_const_tables) > Sergey> +{ > Sergey> + JOIN_TAB *first= join->join_tab; > Sergey> + if (after_const_tables) > Sergey> + first += join->const_tables; > > remove space before '+' > > Sergey> + if (first < join->join_tab + join->top_jtrange_tables) > Sergey> + return first; > Sergey> + else > Sergey> + return NULL; > Sergey> +} > > Better to do: > > return (first < join->join_tab + join->top_jtrange_tables) ? first : 0; > > Or: > > if (first < join->join_tab + join->top_jtrange_tables) > return first; > return NULL; > Changed. > <cut> > > Sergey> +JOIN_TAB *next_linear_tab(JOIN* join, JOIN_TAB* tab, bool include_bush_roots) //psergey2: added > > Remove comments; It's trival to see that the function was added :) > > Sergey> +{ > Sergey> + if (include_bush_roots && tab->bush_children) > Sergey> + return tab->bush_children->start; > Sergey> + > Sergey> + if (tab->last_leaf_in_bush) > Sergey> + tab= tab->bush_root_tab; > Sergey> + > Sergey> + if (tab->bush_root_tab) > Sergey> + return ++tab; > > Add an assert before if (tab->last_leaf_in_bush): > > DBUG_ASSERT(!tab->last_leaf_in_bush || tab->bush_root_tab); > Just to declare that the above code is safe! Done. > Sergey> + > Sergey> + if (++tab == join->join_tab + join->top_jtrange_tables /*join->join_tab_ranges.head()->end*/) > > Move the comment to previous row and make it more clear what you are testing > (The current comment doesn't tell me much) > > Sergey> + return NULL; > Sergey> + > Sergey> + if (!include_bush_roots && tab->bush_children) > Sergey> + { > Sergey> + tab= tab->bush_children->start; > Sergey> + } > Sergey> + return tab; > > Why not do: > > return ((!include_bush_roots && tab->bush_children) ? > tab->bush_children->start : tab); > > Sergey> + if ((start? tab: ++tab) == join->join_tab_ranges.head()->end) > Sergey> + return NULL; /* End */ > > I think the above code would be more clear if you would do: > > if (start) > tab++; > if (...) > > This makes it clear that the ++tab is not just for the test but also > for future usage of tab. Changed. > Sergey> + > Sergey> + if (tab->bush_children) > Sergey> + return tab->bush_children->start; > Sergey> + > Sergey> + return tab; > > Could be combined with ? > > Sergey> +} > Sergey> + > Sergey> + > Sergey> +static Item *null_ptr= NULL; > > Can we make this const, so that if anyone tried to change this memory > location we would get an exception? Done > <cut> > > Sergey> DBUG_RETURN(TRUE); /* purecov: inspected */ > > Sergey> join_tab= parent->join_tab_reexec; > Sergey> + //psergey2: hopefully this is ok: > Sergey> + // join_tab_ranges.head()->start= join_tab; > Sergey> + // join_tab_ranges.head()->end= join_tab + 1; > > Better to know than to hope :) It wasn't ok actually, already changed. > > (sorry, don't have time to look at the rest now) BR Sergey -- Sergey Petrunia, Software Developer Monty Program AB, http://askmonty.org Blog: http://s.petrunia.net/blog

1 0

[Maria-developers] New (by Knielsen test): Replication API for stacked event generators (120)
by worklog-noreply＠askmonty.org 07 Jun '10

07 Jun '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Replication API for stacked event generators CREATION DATE..: Mon, 07 Jun 2010, 13:13 SUPERVISOR.....: Knielsen IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 120 (http://askmonty.org/worklog/?tid=120) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: DESCRIPTION: A part of the replication project, MWL#107. Events are produced by event Generators. Examples are - Generation of statement-based replication events - Generation of row-based events - Generation of PBXT engine-level replication events and maybe reading of events from relay log on slave may also be an example of generating events. Event generators can be stacked, and a generator may defer event generation to the next one down the stack. For example, the row-level replication event generator may defer DLL to the statement-level replication event generator. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] New (by Knielsen test): Replication API for stacked event generators (120)
by worklog-noreply＠askmonty.org 07 Jun '10

07 Jun '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Replication API for stacked event generators CREATION DATE..: Mon, 07 Jun 2010, 13:13 SUPERVISOR.....: Knielsen IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 120 (http://askmonty.org/worklog/?tid=120) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: DESCRIPTION: A part of the replication project, MWL#107. Events are produced by event Generators. Examples are - Generation of statement-based replication events - Generation of row-based events - Generation of PBXT engine-level replication events and maybe reading of events from relay log on slave may also be an example of generating events. Event generators can be stacked, and a generator may defer event generation to the next one down the stack. For example, the row-level replication event generator may defer DLL to the statement-level replication event generator. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Knielsen): New replication APIs (107)
by worklog-noreply＠askmonty.org 07 Jun '10

07 Jun '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: New replication APIs CREATION DATE..: Mon, 15 Mar 2010, 13:55 SUPERVISOR.....: Knielsen IMPLEMENTOR....: Knielsen COPIES TO......: Sergei CATEGORY.......: Server-Sprint TASK ID........: 107 (http://askmonty.org/worklog/?tid=107) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 50 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Knielsen - Mon, 07 Jun 2010, 12:11)=-=- High Level Description modified. --- /tmp/wklog.107.old.31097 2010-06-07 12:11:57.000000000 +0000 +++ /tmp/wklog.107.new.31097 2010-06-07 12:11:57.000000000 +0000 @@ -7,3 +7,6 @@ https://lists.launchpad.net/maria-developers/msg01998.html +Wiki page for the project: + + http://askmonty.org/wiki/ReplicationProject -=-=(Knielsen - Mon, 29 Mar 2010, 07:33)=-=- Research and design discussions: Galera, 2pc/XA, group commit, multi-engine transactions. Worked 14 hours and estimate 0 hours remain (original estimate increased by 14 hours). -=-=(Knielsen - Wed, 24 Mar 2010, 10:39)=-=- Design discussions Worked 11 hours and estimate 0 hours remain (original estimate increased by 11 hours). -=-=(Knielsen - Mon, 15 Mar 2010, 14:28)=-=- Research into the problem, and discussions on phone/mailing list Worked 25 hours and estimate 0 hours remain (original estimate increased by 25 hours). -=-=(Guest - Mon, 15 Mar 2010, 14:18)=-=- High-Level Specification modified. --- /tmp/wklog.107.old.9086 2010-03-15 14:18:18.000000000 +0000 +++ /tmp/wklog.107.new.9086 2010-03-15 14:18:18.000000000 +0000 @@ -1 +1,43 @@ +Current ideas/status after discussions on the mailing list: + + - Implement a set of plugin APIs and use them to move all of the existing + MySQL replication into a (set of) plugins. + + - Design the APIs so that they can support full MySQL replication, but also + so that they do not hardcode assumptions about how this replication + implementation is done, and so that they will be suitable for other types of + replication (Tungsten, Galera, parallel replication, ...). + + - APIs need to include the concept of a global transaction ID. Need to + determine the extent to which the semantics of such ID will be defined + by the API, and to which extend it will be defined by the plugin + implementations. + + - APIs should properly support reliable crash-recovery with decent + performance (eg. not require multiple mandatory fsync()s per commit, and + not make group commit impossible). + + - Would be nice if the API provided facilities for implementing good + consistency checking support (mainly checking master tables against slave + tables is hard here I think, but also applying wrong binlog data and + individual event checksums). + + +Steps to make this more concrete: + + - Investigate the current MySQL replication, and list all of the places where + a plugin implementation will need to connect/hook into the MySQL server. + * handler::{write,update,delete}_row() + * Statement execution + * Transaction start/commit + * Table open + * Query safe/not/safe for statement based replication + * Statement-based logging details (user variables, random seed, etc.) + * ... + + - Use this list to make an initial sketch of the set of APIs we need. + + - Use the list to determine the feasibility of this project and the level of + detail in the API needed to support a full replication implementation as a + plugin. -=-=(Serg - Mon, 15 Mar 2010, 14:13)=-=- Observers changed: Sergei DESCRIPTION: This is a top-level task for the project of designing a new set of replication APIs for MariaDB. This task is for the initial discussion of what to do and where to focus. The project is started in this email thread: https://lists.launchpad.net/maria-developers/msg01998.html Wiki page for the project: http://askmonty.org/wiki/ReplicationProject HIGH-LEVEL SPECIFICATION: Current ideas/status after discussions on the mailing list: - Implement a set of plugin APIs and use them to move all of the existing MySQL replication into a (set of) plugins. - Design the APIs so that they can support full MySQL replication, but also so that they do not hardcode assumptions about how this replication implementation is done, and so that they will be suitable for other types of replication (Tungsten, Galera, parallel replication, ...). - APIs need to include the concept of a global transaction ID. Need to determine the extent to which the semantics of such ID will be defined by the API, and to which extend it will be defined by the plugin implementations. - APIs should properly support reliable crash-recovery with decent performance (eg. not require multiple mandatory fsync()s per commit, and not make group commit impossible). - Would be nice if the API provided facilities for implementing good consistency checking support (mainly checking master tables against slave tables is hard here I think, but also applying wrong binlog data and individual event checksums). Steps to make this more concrete: - Investigate the current MySQL replication, and list all of the places where a plugin implementation will need to connect/hook into the MySQL server. * handler::{write,update,delete}_row() * Statement execution * Transaction start/commit * Table open * Query safe/not/safe for statement based replication * Statement-based logging details (user variables, random seed, etc.) * ... - Use this list to make an initial sketch of the set of APIs we need. - Use the list to determine the feasibility of this project and the level of detail in the API needed to support a full replication implementation as a plugin. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Knielsen): New replication APIs (107)
by worklog-noreply＠askmonty.org 07 Jun '10

07 Jun '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: New replication APIs CREATION DATE..: Mon, 15 Mar 2010, 13:55 SUPERVISOR.....: Knielsen IMPLEMENTOR....: Knielsen COPIES TO......: Sergei CATEGORY.......: Server-Sprint TASK ID........: 107 (http://askmonty.org/worklog/?tid=107) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 50 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Knielsen - Mon, 07 Jun 2010, 12:11)=-=- High Level Description modified. --- /tmp/wklog.107.old.31097 2010-06-07 12:11:57.000000000 +0000 +++ /tmp/wklog.107.new.31097 2010-06-07 12:11:57.000000000 +0000 @@ -7,3 +7,6 @@ https://lists.launchpad.net/maria-developers/msg01998.html +Wiki page for the project: + + http://askmonty.org/wiki/ReplicationProject -=-=(Knielsen - Mon, 29 Mar 2010, 07:33)=-=- Research and design discussions: Galera, 2pc/XA, group commit, multi-engine transactions. Worked 14 hours and estimate 0 hours remain (original estimate increased by 14 hours). -=-=(Knielsen - Wed, 24 Mar 2010, 10:39)=-=- Design discussions Worked 11 hours and estimate 0 hours remain (original estimate increased by 11 hours). -=-=(Knielsen - Mon, 15 Mar 2010, 14:28)=-=- Research into the problem, and discussions on phone/mailing list Worked 25 hours and estimate 0 hours remain (original estimate increased by 25 hours). -=-=(Guest - Mon, 15 Mar 2010, 14:18)=-=- High-Level Specification modified. --- /tmp/wklog.107.old.9086 2010-03-15 14:18:18.000000000 +0000 +++ /tmp/wklog.107.new.9086 2010-03-15 14:18:18.000000000 +0000 @@ -1 +1,43 @@ +Current ideas/status after discussions on the mailing list: + + - Implement a set of plugin APIs and use them to move all of the existing + MySQL replication into a (set of) plugins. + + - Design the APIs so that they can support full MySQL replication, but also + so that they do not hardcode assumptions about how this replication + implementation is done, and so that they will be suitable for other types of + replication (Tungsten, Galera, parallel replication, ...). + + - APIs need to include the concept of a global transaction ID. Need to + determine the extent to which the semantics of such ID will be defined + by the API, and to which extend it will be defined by the plugin + implementations. + + - APIs should properly support reliable crash-recovery with decent + performance (eg. not require multiple mandatory fsync()s per commit, and + not make group commit impossible). + + - Would be nice if the API provided facilities for implementing good + consistency checking support (mainly checking master tables against slave + tables is hard here I think, but also applying wrong binlog data and + individual event checksums). + + +Steps to make this more concrete: + + - Investigate the current MySQL replication, and list all of the places where + a plugin implementation will need to connect/hook into the MySQL server. + * handler::{write,update,delete}_row() + * Statement execution + * Transaction start/commit + * Table open + * Query safe/not/safe for statement based replication + * Statement-based logging details (user variables, random seed, etc.) + * ... + + - Use this list to make an initial sketch of the set of APIs we need. + + - Use the list to determine the feasibility of this project and the level of + detail in the API needed to support a full replication implementation as a + plugin. -=-=(Serg - Mon, 15 Mar 2010, 14:13)=-=- Observers changed: Sergei DESCRIPTION: This is a top-level task for the project of designing a new set of replication APIs for MariaDB. This task is for the initial discussion of what to do and where to focus. The project is started in this email thread: https://lists.launchpad.net/maria-developers/msg01998.html Wiki page for the project: http://askmonty.org/wiki/ReplicationProject HIGH-LEVEL SPECIFICATION: Current ideas/status after discussions on the mailing list: - Implement a set of plugin APIs and use them to move all of the existing MySQL replication into a (set of) plugins. - Design the APIs so that they can support full MySQL replication, but also so that they do not hardcode assumptions about how this replication implementation is done, and so that they will be suitable for other types of replication (Tungsten, Galera, parallel replication, ...). - APIs need to include the concept of a global transaction ID. Need to determine the extent to which the semantics of such ID will be defined by the API, and to which extend it will be defined by the plugin implementations. - APIs should properly support reliable crash-recovery with decent performance (eg. not require multiple mandatory fsync()s per commit, and not make group commit impossible). - Would be nice if the API provided facilities for implementing good consistency checking support (mainly checking master tables against slave tables is hard here I think, but also applying wrong binlog data and individual event checksums). Steps to make this more concrete: - Investigate the current MySQL replication, and list all of the places where a plugin implementation will need to connect/hook into the MySQL server. * handler::{write,update,delete}_row() * Statement execution * Transaction start/commit * Table open * Query safe/not/safe for statement based replication * Statement-based logging details (user variables, random seed, etc.) * ... - Use this list to make an initial sketch of the set of APIs we need. - Use the list to determine the feasibility of this project and the level of detail in the API needed to support a full replication implementation as a plugin. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Rev 2790: bugfixes in file:///home/bell/maria/bzr/work-maria-5.3-scache2/
by sanja＠askmonty.org 07 Jun '10

07 Jun '10

At file:///home/bell/maria/bzr/work-maria-5.3-scache2/ ------------------------------------------------------------ revno: 2790 revision-id: sanja(a)askmonty.org-20100607075845-lo3tcaiuk54qqlw0 parent: sanja(a)askmonty.org-20100531212554-oal32d5v360l6cul committer: sanja(a)askmonty.org branch nick: work-maria-5.3-scache2 timestamp: Mon 2010-06-07 10:58:45 +0300 message: bugfixes === modified file 'mysql-test/r/subquery_cache.result' --- a/mysql-test/r/subquery_cache.result 2010-05-31 21:25:54 +0000 +++ b/mysql-test/r/subquery_cache.result 2010-06-07 07:58:45 +0000 @@ -588,4 +588,28 @@ Subquery_cache_hit 0 Subquery_cache_miss 4 drop table t1; +#test of sql_big_tables switch and outer table reference in subquery with grouping +set option sql_big_tables=1; +CREATE TABLE t1 (a INT PRIMARY KEY, b INT); +INSERT INTO t1 VALUES (1,1),(2,1),(3,2),(4,2),(5,3),(6,3); +SELECT (SELECT t1_outer.a FROM t1 AS t1_inner GROUP BY b LIMIT 1) FROM t1 AS t1_outer; +(SELECT t1_outer.a FROM t1 AS t1_inner GROUP BY b LIMIT 1) +1 +2 +3 +4 +5 +6 +drop table t1; +set option sql_big_tables=0; +#test of function reference to outer query +set local group_concat_max_len=400; +create table t2 (a int, b int); +insert into t2 values (1,1), (2,2); +select b x, (select group_concat(x) from t2) from t2; +x (select group_concat(x) from t2) +1 1,1 +2 2,2 +drop table t2; +set local group_concat_max_len=default; set optimizer_switch='subquery_cache=default'; === modified file 'mysql-test/t/subquery_cache.test' --- a/mysql-test/t/subquery_cache.test 2010-05-31 21:25:54 +0000 +++ b/mysql-test/t/subquery_cache.test 2010-06-07 07:58:45 +0000 @@ -201,4 +201,20 @@ show status like "subquery_cache%"; drop table t1; +--echo #test of sql_big_tables switch and outer table reference in subquery with grouping +set option sql_big_tables=1; +CREATE TABLE t1 (a INT PRIMARY KEY, b INT); +INSERT INTO t1 VALUES (1,1),(2,1),(3,2),(4,2),(5,3),(6,3); +SELECT (SELECT t1_outer.a FROM t1 AS t1_inner GROUP BY b LIMIT 1) FROM t1 AS t1_outer; +drop table t1; +set option sql_big_tables=0; + +--echo #test of function reference to outer query +set local group_concat_max_len=400; +create table t2 (a int, b int); +insert into t2 values (1,1), (2,2); +select b x, (select group_concat(x) from t2) from t2; +drop table t2; +set local group_concat_max_len=default; + set optimizer_switch='subquery_cache=default'; === modified file 'sql/table.cc' --- a/sql/table.cc 2010-05-31 21:25:54 +0000 +++ b/sql/table.cc 2010-06-07 07:58:45 +0000 @@ -5187,10 +5187,16 @@ key_part_info->store_length= key_part_info->length; if ((*reg_field)->real_maybe_null()) + { key_part_info->store_length+= HA_KEY_NULL_LENGTH; + keyinfo->key_length+= HA_KEY_NULL_LENGTH; + } if ((*reg_field)->type() == MYSQL_TYPE_BLOB || (*reg_field)->real_type() == MYSQL_TYPE_VARCHAR) + { key_part_info->store_length+= HA_KEY_BLOB_LENGTH; + keyinfo->key_length+= HA_KEY_BLOB_LENGTH; // ??? + } key_part_info->type= (uint8) (*reg_field)->key_type(); key_part_info->key_type =

1 0

[Maria-developers] Progress (by Knielsen): Efficient group commit for binary log (116)
by worklog-noreply＠askmonty.org 07 Jun '10

07 Jun '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Efficient group commit for binary log CREATION DATE..: Mon, 26 Apr 2010, 13:28 SUPERVISOR.....: Knielsen IMPLEMENTOR....: Knielsen COPIES TO......: Serg CATEGORY.......: Server-RawIdeaBin TASK ID........: 116 (http://askmonty.org/worklog/?tid=116) VERSION........: Server-9.x STATUS.........: Assigned PRIORITY.......: 60 WORKED HOURS...: 74 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Knielsen - Mon, 07 Jun 2010, 07:16)=-=- Missing hours in previous progress report. Worked 3 hours and estimate 0 hours remain (original estimate increased by 3 hours). -=-=(Knielsen - Mon, 07 Jun 2010, 07:15)=-=- Some more benchmarking. Blog about results and architecture. Fix two bugs in the proof-of-concept patch, races that causes hangs in benchmarks. Worked 11 hours and estimate 0 hours remain (original estimate increased by 11 hours). -=-=(Guest - Tue, 01 Jun 2010, 14:20)=-=- Status updated. --- /tmp/wklog.116.old.32652 2010-06-01 14:20:15.000000000 +0000 +++ /tmp/wklog.116.new.32652 2010-06-01 14:20:15.000000000 +0000 @@ -1 +1 @@ -Un-Assigned +Assigned -=-=(Knielsen - Mon, 31 May 2010, 06:48)=-=- Finish first architecture draft (changed my mind a number of times before I was satisfied). Write up architecture in worklog. Fix remaining test failures in proof-of-concept patch + implement xtradb part. Run some benchmarks on proof-of-concept implementation. Worked 11 hours and estimate 0 hours remain (original estimate increased by 11 hours). -=-=(Knielsen - Tue, 25 May 2010, 13:19)=-=- Low Level Design modified. --- /tmp/wklog.116.old.14255 2010-05-25 13:19:00.000000000 +0000 +++ /tmp/wklog.116.new.14255 2010-05-25 13:19:00.000000000 +0000 @@ -1 +1,363 @@ +1. Changes for ha_commit_trans() + +The gut of the code for commit is in the function ha_commit_trans() (and in +commit_one_phase() which is called from it). This must be extended to use the +new prepare_ordered(), group_log_xid(), and commit_ordered() calls. + +1.1 Atomic queue of committing transactions + +To keep the right commit order among participants, we put transactions into a +queue. The operations on the queue are non-locking: + + - Insert THD at the head of the queue, and return old queue. + + THD *enqueue_atomic(THD *thd) + + - Fetch (and delete) the whole queue. + + THD *atomic_grab_reverse_queue() + +These are simple to implement with atomic compare-and-set. Note that there is +no ABA problem [2], as we do not delete individual elements from the queue, we +grab the whole queue and replace it with NULL. + +A transaction enters the queue when it does prepare_ordered(). This way, the +scheduling order for prepare_ordered() calls is what determines the sequence +in the queue and effectively the commit order. + +The queue is grabbed by the code doing group_log_xid() and commit_ordered() +calls. The queue is passed directly to group_log_xid(), and afterwards +iterated to do individual commit_ordered() calls. + +Using a lock-free queue allows prepare_ordered() (for one transaction) to run +in parallel with commit_ordered (in another transaction), increasing potential +parallelism. + +The queue is simply a linked list of THD objects, linked through a +THD::next_commit_ordered field. Since we add at the head of the queue, the +list is actually in reverse order, so must be reversed when we grab and delete +it. + +The reason that enqueue_atomic() returns the old queue is so that we can check +if an insert goes to the head of the queue. The thread at the head of the +queue will do the sequential part of group commit for everyone. + + +1.2 Locks + +1.2.1 Global LOCK_prepare_ordered + +This lock is taken to serialise calls to prepare_ordered(). Note that +effectively, the commit order is decided by the order in which threads obtain +this lock. + + +1.2.2 Global LOCK_group_commit and COND_group_commit + +This lock is used to protect the serial part of group commit. It is taken +around the code where we grab the queue, call group_log_xid() on the queue, +and call commit_ordered() on each element of the queue, to make sure they +happen serialised and in consistent order. It also protects the variable +group_commit_queue_busy, which is used when not using group_log_xid() to delay +running over a new queue until the first queue is completely done. + + +1.2.3 Global LOCK_commit_ordered + +This lock is taken around calls to commit_ordered(), to ensure they happen +serialised. + + +1.2.4 Per-thread thd->LOCK_commit_ordered and thd->COND_commit_ordered + +This lock protects the thd->group_commit_ready variable, as well as the +condition variable used to wake up threads after log_xid() and +commit_ordered() finishes. + + +1.2.5 Global LOCK_group_commit_queue + +This is only used on platforms with no native compare-and-set operations, to +make the queue operations atomic. + + +1.3 Commit algorithm. + +This is the basic algorithm, simplified by + + - omitting some error handling + + - omitting looping over all handlers when invoking handler methods + + - omitting some possible optimisations when not all calls needed (see next + section). + + - Omitting the case where no group_log_xid() is used, see below. + +---- BEGIN ALGORITHM ---- + ht->prepare() + + // Call prepare_ordered() and enqueue in correct commit order + lock(LOCK_prepare_ordered) + ht->prepare_ordered() + old_queue= enqueue_atomic(thd) + thd->group_commit_ready= FALSE + is_group_commit_leader= (old_queue == NULL) + unlock(LOCK_prepare_ordered) + + if (is_group_commit_leader) + + // The first in queue handles group commit for everyone + + lock(LOCK_group_commit) + // Wait while queue is busy, see below for when this occurs + while (group_commit_queue_busy) + cond_wait(COND_group_commit) + + // Grab and reverse the queue to get correct order of transactions + queue= atomic_grab_reverse_queue() + + // This call will set individual error codes in thd->xid_error + // It also sets the cookie for unlog() in thd->xid_cookie + group_log_xid(queue) + + lock(LOCK_commit_ordered) + for (other IN queue) + if (!other->xid_error) + ht->commit_ordered() + unlock(LOCK_commit_ordered) + + unlock(LOCK_group_commit) + + // Now we are done, so wake up all the others. + for (other IN TAIL(queue)) + lock(other->LOCK_commit_ordered) + other->group_commit_ready= TRUE + cond_signal(other->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + else + // If not the leader, just wait until leader did the work for us. + lock(thd->LOCK_commit_ordered) + while (!thd->group_commit_ready) + cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + + // Finally do any error reporting now that we're back in own thread. + if (thd->xid_error) + xid_delayed_error(thd) + else + ht->commit(thd) + unlog(thd->xid_cookie, thd->xid) +---- END ALGORITHM ---- + +If the transaction coordinator does not support group_log_xid(), we have to do +things differently. In this case after the serialisation point at +prepare_ordered(), we have to parallelise again when running log_xid() +(otherwise we would loose group commit). But then when log_xid() is done, we +have to serialise again to check for any error and call commit_ordered() in +correct sequence for any transaction where log_xid() did not return error. + +The central part of the algorithm in this case (when using log_xid()) is: + +---- BEGIN ALGORITHM ---- + cookie= log_xid(thd) + error= (cookie == 0) + + if (is_group_commit_leader) + + // The first to enqueue grabs the queue and runs first. + // But we must wait until a previous queue run is fully done. + + lock(LOCK_group_commit) + while (group_commit_queue_busy) + cond_wait(COND_group_commit) + queue= atomic_grab_reverse_queue() + // The queue will be busy until last thread in it is done. + group_commit_queue_busy= TRUE + unlock(LOCK_group_commit) + else + // Not first in queue -> wait for previous one to wake us up. + lock(thd->LOCK_commit_ordered) + while (!thd->group_commit_ready) + cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + + if (!error) // Only if log_xid() was successful + lock(LOCK_commit_ordered) + ht->commit_ordered() + unlock(LOCK_commit_ordered) + + // Wake up the next thread, and release queue in last. + next= thd->next_commit_ordered + + if (next) + lock(next->LOCK_commit_ordered) + next->group_commit_ready= TRUE + cond_signal(next->COND_commit_ordered) + unlock(next->LOCK_commit_ordered) + else + lock(LOCK_group_commit) + group_commit_queue_busy= FALSE + unlock(LOCK_group_commit) +---- END ALGORITHM ---- + +There are a number of locks taken in the algorithm, but in the group_log_xid() +case most of them should be uncontended most of the time. The +LOCK_group_commit of course will be contended, as new threads queue up waiting +for the previous group commit (and binlog fsync()) to finish so they can do +the next group commit. This is the whole point of implementing group commit. + +The LOCK_prepare_ordered and LOCK_commit_ordered mutexes should be not much +contended as long as handlers follow the intension of having the corresponding +handler calls execute quickly. + +The per-thread LOCK_commit_ordered mutexes should not be contended; they are +only used to wake up a sleeping thread. + + +1.4 Optimisations when not using all three new calls + + +The prepare_ordered(), group_log_xid(), and commit_ordered() methods are +optional, and if not implemented by a particular handler/transaction +coordinator, we can optimise the algorithm to take advantage of not having to +keep ordering for the missing parts. + +If there is no prepare_ordered(), then we need not take the +LOCK_prepare_ordered mutex. + +If there is no commit_ordered(), then we need not take the LOCK_commit_ordered +mutex. + +If there is no group_log_xid(), then we only need the queue to ensure same +ordering of transactions for commit_ordered() as for prepare_ordered(). Thus, +if either of these (or both) are also not present, we do not need to use the +queue at all. + + +2. Binlog code changes (log.cc) + + +The bulk of the work needed for the binary log is to extend the code to allow +group commit to the log. Unlike InnoDB/XtraDB, there is no existing support +inside the binlog code for group commit. + +The existing code runs most of the write + fsync to the binary lock under the +global LOCK_log mutex, preventing any group commit. + +To enable group commit, this code must be split into two parts: + + - one part that runs per transaction, re-writing the embedded event positions + for the correct offset, and writing this into the in-memory log cache. + + - another part that writes a set of transactions to the disk, and runs + fsync(). + +Then in group_log_xid(), we can run the first part in a loop over all the +transactions in the passed-in queue, and run the second part only once. + +The binlog code also has other code paths that write into the binlog, +eg. non-transactional statements. These have to be adapted also to work with +the new code. + +In order to get some group commit facility for these also, we change that part +of the code in a similar way to ha_commit_trans. We keep another, +binlog-internal queue of such non-transactional binlog writes, and such writes +queue up here before sleeping on the LOCK_log mutex. Once a thread obtains the +LOCK_log, it loops over the queue for the fast part, and does the slow part +once, then finally wakes up the others in the queue. + +In the transactional case in group_log_xid(), before we run the passed-in +queue, we add any members found in the binlog-internal queue. This allows +these non-transactional writes to share the group commit. + +However, in the case where it is a non-transactional write that gets the +LOCK_log, the transactional transactions from the ha_commit_trans() queue will +not be able to take part (they will have to wait for their turn to do another +fsync). It seems difficult to cleanly let the binlog code grab the queue from +out of the ha_commit_trans() algorithm. I think the group commit is mostly +useful in transactional workloads anyway (non-transactional engines will loose +data anyway in case of crash, so why fsync() after each transaction?) + + +3. XtraDB changes (ha_innodb.cc) + +The changes needed in XtraDB are comparatively simple, as XtraDB already +implements group commit, it just needs to be enabled with the new +commit_ordered() call. + +The existing commit() method already is logically in two parts. The first part +runs under the prepare_commit_mutex() and must be run in same order as binlog +commit. This part needs to be moved to commit_ordered(). The second part runs +after releasing prepare_commit_mutex and does transaction log write+fsync; it +can remain. + +Then the prepare_commit_mutex is removed (and the enable_unsafe_group_commit +XtraDB option to disable it). + +There are two asserts that check that the thread running the first part of +XtraDB commit is the same as the thread running the other operations for the +transaction. These have to be removed (as commit_ordered() can run in a +different thread). Also an error reporting with sql_print_error() has to be +delayed until commit() time. + + +4. Proof-of-concept implementation + +There is a proof-of-concept implementation of this architecture, in the form +of a quilt patch series [3]. + +A quick benchmark was done, with sync_binlog=1 and +innodb_flush_log_at_trx_commit=1. 64 parallel threads doing single-row +transactions against one table. + +Without the patch, we get only 25 queries per second. + +With the patch, we get 650 queries per second. + + +5. Open issues/tasks + +5.1 XA / other prepare() and commit() call sites. + +Check that user-level XA is handled correctly and working. And covered +sufficiently with tests. Also check that any other calls of ha->prepare() and +ha->commit() outside of ha_commit_trans() are handled correctly. + +5.2 Testing + +This worklog needs additions to the test suite, including error inserts to +check error handling, and synchronisation points to check thread parallelism +correctness. + + +6. Alternative implementations + + - The binlog code maintains its own extra atomic transaction queue to handle + non-transactional commits in a good way together with transactional (with + respect to group commit). Alternatively, we could ignore this issue and + just give up on group commit for non-transactional statements, for some + code simplifications. + + - The binlog code has two ways to prepare end_event and similar, one that + uses stack-allocation, and another for when stack allocation is not + possible that uses thd->mem_root. Probably the overhead of thd->mem_root is + so small that it would make sense to use the same code for both cases. + + - Instead of adding extra fields to THD, we could allocate a separate + structure on the thd->mem_root() with the required extra fields (including + the THD pointer). Would seem to require initialising mutexes at every + commit though. + + - It would probably be a good idea to implement TC_LOG_MMAP::group_log_xid() + (should not be hard). + + +----------------------------------------------------------------------- + +References: + +[2] https://secure.wikimedia.org/wikipedia/en/wiki/ABA_problem + +[3] https://knielsen-hq.org/maria/patches.mwl116/ -=-=(Knielsen - Tue, 25 May 2010, 13:18)=-=- High-Level Specification modified. --- /tmp/wklog.116.old.14249 2010-05-25 13:18:34.000000000 +0000 +++ /tmp/wklog.116.new.14249 2010-05-25 13:18:34.000000000 +0000 @@ -1 +1,157 @@ +The basic idea in group commit is that multiple threads, each handling one +transaction, prepare for commit and then queue up together waiting to do an +fsync() on the transaction log. Then once the log is available, a single +thread does the fsync() + other necessary book-keeping for all of the threads +at once. After this, the single thread signals the other threads that it's +done and they can finish up and return success (or failure) from the commit +operation. + +So group commit has a parallel part, and a sequential part. So we need a +facility for engines/binlog to participate in both the parallel and the +sequential part. + +To do this, we add two new handlerton methods: + + int (*prepare_ordered)(handlerton *hton, THD *thd, bool all); + void (*commit_ordered)(handlerton *hton, THD *thd, bool all); + +The idea is that the existing prepare() and commit() methods run in the +parallel part of group commit, and the new prepare_ordered() and +commit_ordered() run in the sequential part. + +The prepare_ordered() method is called after prepare(). The order of +tranctions that call into prepare_ordered() is guaranteed to be the same among +all storage engines and binlog, and it is serialised so no two calls can be +running inside the same engine at the same time. + +The commit_ordered() method is called before commit(), and similarly is +guaranteed to have same transaction order in all participants, and to be +serialised within one engine. + +As the prepare_ordered() and commit_ordered() calls are serialised, the idea +is that handlers should do the minimum amount of work needed in these calls, +relaying most of the work (eg. fsync() ...) to prepare() and commit(). + +As a concrete example, for InnoDB the commit_ordered() method will do the +first part of commit that fixed the commit order in the transaction log +buffer, and the commit() method will write the log to disk and fsync() +it. This split already exists inside the InnoDB code, running before +respectively after releasing the prepare_commit_mutex. + +In addition, the XA transaction coordinator (TC_LOG) is special, since it is +the one responsible for deciding whether to commit or rollback the +transaction. For this we need an extra method, since this decision can be done +only after we know that all prepare() and prepare_ordered() calls succeed, and +must be done to know whether to call commit_ordered()/commit(), or do rollback. + +The existing method for this is TC_LOG::log_xid(). To make implementing group +commit simpler to implement in a transaction coordinator and more efficient, +we introduce a new method: + + void group_log_xid(THD *first_thd); + +This method runs in the sequential part of group commit. It receives a list of +transactions to perform log_xid() on, in the correct commit order. (Note that +TC_LOG can do parallel parts of group commit in its own prepare() and commit() +methods). + +This method can make it easier to implement the group commit in TC_LOG, as it +gets directly the list of transactions in the right order. Without it, it +might need to compute such order anyway in a prepare_ordered() method, and the +server has to create this ordered list anyway to implement the order guarantee +for prepare_ordered() and commit_ordered(). + +This group_log_xid() method also is more efficient, as it avoids some +inter-thread synchronisation. Since group_log_xid() is serialised, we can run +it together with all the commit_ordered() method calls and need only a single +sequential code section. With the log_xid() methods, we would need first a +sequential part for the prepare_ordered() calls, then a parallel part with +log_xid() calls (to not loose group commit ability for log_xid()), then again +a sequential part for the commit_ordered() method calls. + +The extra synchronisation is needed, as each commit_ordered() call will have +to wait for log_xid() in one thread (if log_xid() fails then commit_ordered() +should not be called), and also wait for commit_ordered() to finish in all +threads handling earlier commits. In effect we will need to bounce the +execution from one thread to the other among all participants in the group +commit. + +As a consequence of the group_log_xid() optimisation, handlers must be aware +that the commit_ordered() call can happen in another thread than the one +running commit() (so thread local storage is not available). This should not +be a big issue as the THD is available for storing any needed information. + +Since group_log_xid() runs for multiple transactions in a single thread, it +can not do error reporting (my_error()) as that relies on thread local +storage. Instead it sets an error code in THD::xid_error, and if there is an +error then later another method will be called (in correct thread context) to +actually report the error: + + int xid_delayed_error(THD *thd) + +The three new methods prepare_ordered(), group_log_xid(), and commit_ordered() +are optional (as is xid_delayed_error). A storage engine or transaction +coordinator is free to not implement them if they are not needed. In this case +there will be no order guarantee for the corresponding stage of group commit +for that engine. For example, InnoDB needs no ordering of the prepare phase, +so can omit implementing prepare_ordered(); TC_LOG_MMAP needs no ordering at +all, so does not need to implement any of them. + +Note in particular that all existing engines (/binlog implementations if they +exist) will work unmodified (and also without any change in group commit +facilities or commit order guaranteed). + +Using these new APIs, the work will be to + + - In ha_commit_trans(), implement the correct semantics for the three new + calls. + + - In XtraDB, use the new commit_ordered() call to remove the + prepare_commit_mutex (and resurrect group commit) without loosing the + consistency with binlog commit order. + + - In log.cc (binlog module), implement group_log_xid() to do group commit of + multiple transactions to the binlog with a single shared fsync() call. + +----------------------------------------------------------------------- +Some possible alternative for this worklog: + + - We could eliminate the group_log_xid() method for a simpler API, at the + cost of extra synchronisation between threads to do in-order + commit_ordered() method calls. This would also allow to call + commit_ordered() in the correct thread context. + + - Alternatively, we could eliminate log_xid() and require that all + transaction coordinators implement group_log_xid() instead, again for some + moderate simplification. + + - At the moment there is no plugin actually using prepare_ordered(), so, it + could be removed from the design. But it fits in well, is efficient to + implement, and could be useful later (eg. for the requested feature of + releasing locks early in InnoDB). + +----------------------------------------------------------------------- +Some possible follow-up projects after this is implemented: + + - Add statistics about how efficient group commit is (#fsyncs/#commits in + each engine and binlog). + + - Implement an XtraDB prepare_ordered() methods that can release row locks + early (Mark Callaghan from Facebook advocates this, but need to determine + exactly how to do this safely). + + - Implement a new crash recovery algorithm that uses the consistent commit + ordering to need only fsync() for the binlog. At crash recovery, any + missing transactions in an engine is replayed from the correct point in the + binlog (this point must be stored transactionally inside the engine, as + XtraDB already does today). + + - Implement that START TRANSACTION WITH CONSISTENT SNAPSHOT 1) really gets a + consistent snapshow, with same set of committed and not committed + transactions in all engines, 2) returns a corresponding consistent binlog + position. This should be easy by piggybacking on the synchronisation + implemented for ha_commit_trans(). + + - Use this in XtraBackup to get consistent binlog position without having to + block all updates with FLUSH TABLES WITH READ LOCK. -=-=(Knielsen - Tue, 25 May 2010, 13:18)=-=- High Level Description modified. --- /tmp/wklog.116.old.14234 2010-05-25 13:18:07.000000000 +0000 +++ /tmp/wklog.116.new.14234 2010-05-25 13:18:07.000000000 +0000 @@ -21,3 +21,69 @@ http://kristiannielsen.livejournal.com/12408.html http://kristiannielsen.livejournal.com/12553.html +---- + +Implementing group commit in MySQL faces some challenges from the handler +plugin architecture: + +1. Because storage engine handlers have separate transaction log from the +mysql binlog (and from each other), there are multiple fsync() calls per +commit that need the group commit optimisation (2 per participating storage +engine + 1 for binlog). + +2. The code handling commit is split in several places, in main server code +and in storage engine code. With pluggable binlog it will be split even +more. This requires a good abstract yet powerful API to be able to implement +group commit simply and efficiently in plugins without the different parts +having to rely on iternals of the others. + +3. We want the order of commits to be the same in all engines participating in +multiple transactions. This requirement is the reason that InnoDB currently +breaks group commit with the infamous prepare_commit_mutex. + +While currently there is no server guarantee to get same commit order in +engines an binlog (except for the InnoDB prepare_commit_mutex hack), there are +several reasons why this could be desirable: + + - InnoDB hot backup needs to be able to extract a binlog position that is + consistent with the hot backup to be able to provision a new slave, and + this is impossible without imposing at least partial consistent ordering + between InnoDB and binlog. + + - Other backup methods could have similar needs, eg. XtraBackup or + `mysqldump --single-transaction`, to have consistent commit order between + binlog and storage engines without having to do FLUSH TABLES WITH READ LOCK + or similar expensive blocking operation. (other backup methods, like LVM + snapshot, don't need consistent commit order, as they can restore + out-of-order commits during crash recovery using XA). + + - If we have consistent commit order, we can think about optimising commit to + need only one fsync (for binlog); lost commits in storage engines can then + be recovered from the binlog at crash recovery by re-playing against the + engine from a particular point in the binlog. + + - With consistent commit order, we can get better semantics for START + TRANSACTION WITH CONSISTENT SNAPSHOT with multi-engine transactions (and we + could even get it to return also a matching binlog position). Currently, + this "CONSISTENT SNAPSHOT" can be inconsistent among multiple storage + engines. + + - In InnoDB, the performance in the presense of hotspots can be improved if + we can release row locks early in the commit phase, but this requires that we +release them in + the same order as commits in the binlog to ensure consistency between + master and slaves. + + - There was some discussions around Galera [1] synchroneous replication and + global transaction ID that it needed consistent commit order among + participating engines. + + - I believe there could be other applications for guaranteed consistent + commit order, and that the architecture described in this worklog can + implement such guarantee with reasonable overhead. + + +References: + +[1] Galera: http://www.codership.com/products/galera_replication + -=-=(Knielsen - Tue, 25 May 2010, 08:28)=-=- More thoughts on and changes to the archtecture. Got to something now that I am satisfied with and that seems to be able to handle all issues. Implement new prepare_ordered and commit_ordered handler methods and the logic in ha_commit_trans(). Implement TC_LOG::group_log_xid() method and logic in ha_commit_trans(). Implement XtraDB part, using commit_ordered() rather than prepare_commit_mutex. Fix test suite failures. Proof-of-concept patch series complete now. Do initial benchmark, getting good results. With 64 threads, see 26x improvement in queries-per-sec. Next step: write up the architecture description. Worked 21 hours and estimate 0 hours remain (original estimate increased by 21 hours). -=-=(Knielsen - Wed, 12 May 2010, 06:41)=-=- Started work on a Quilt patch series, refactoring the binlog code to prepare for implementing the group commit, and working on the design of group commit in parallel. Found and fixed several problems in error handling when writing to binlog. Removed redundant table map version locking. Split binlog writing into two parts in preparations for group commit. When ready to write to the binlog, threads enter a queue, and the first thread in the queue handles the binlog writing for everyone. When it obtains the LOCK_log, it first loops over all threads, executing the first part of binlog writing (the write(2) syscall essentially). It then runs the second part (fsync(2) essentially) only once, and then wakes up the remaining threads in the queue. Still to be done: Finish the proof-of-concept group commit patch, by 1) implementing the prepare_fast() and commit_fast() callbacks in handler.cc 2) move the binlog thread enqueue from log_xid() to binlog_prepare_fast(), 3) move fast part of InnoDB commit to innobase_commit_fast(), removing the prepare_commit_mutex(). Write up the final design in this worklog. Evaluate the design to see if we can do better/different. Think about possible next steps, such as releasing innodb row locks early (in innobase_prepare_fast), and doing crash recovery by replaying transactions from the binlog (removing the need for engine durability and 2 of 3 fsync() in commit). Worked 28 hours and estimate 0 hours remain (original estimate increased by 28 hours). -=-=(Serg - Mon, 26 Apr 2010, 14:10)=-=- Observers changed: Serg DESCRIPTION: Currently, in order to ensure that the server can recover after a crash to a state in which storage engines and binary log are consistent with each other, it is necessary to use XA with durable commits for both storage engines (innodb_flush_log_at_trx_commit=1) and binary log (sync_binlog=1). This is _very_ expensive, since the server needs to do three fsync() operations for every commit, as there is no working group commit when the binary log is enabled. The idea is to - Implement/fix group commit to work properly with the binary log enabled. - (Optionally) avoid the need to fsync() in the engine, and instead rely on replaying any lost transactions from the binary log against the engine during crash recovery. For background see these articles: http://kristiannielsen.livejournal.com/12254.html http://kristiannielsen.livejournal.com/12408.html http://kristiannielsen.livejournal.com/12553.html ---- Implementing group commit in MySQL faces some challenges from the handler plugin architecture: 1. Because storage engine handlers have separate transaction log from the mysql binlog (and from each other), there are multiple fsync() calls per commit that need the group commit optimisation (2 per participating storage engine + 1 for binlog). 2. The code handling commit is split in several places, in main server code and in storage engine code. With pluggable binlog it will be split even more. This requires a good abstract yet powerful API to be able to implement group commit simply and efficiently in plugins without the different parts having to rely on iternals of the others. 3. We want the order of commits to be the same in all engines participating in multiple transactions. This requirement is the reason that InnoDB currently breaks group commit with the infamous prepare_commit_mutex. While currently there is no server guarantee to get same commit order in engines an binlog (except for the InnoDB prepare_commit_mutex hack), there are several reasons why this could be desirable: - InnoDB hot backup needs to be able to extract a binlog position that is consistent with the hot backup to be able to provision a new slave, and this is impossible without imposing at least partial consistent ordering between InnoDB and binlog. - Other backup methods could have similar needs, eg. XtraBackup or `mysqldump --single-transaction`, to have consistent commit order between binlog and storage engines without having to do FLUSH TABLES WITH READ LOCK or similar expensive blocking operation. (other backup methods, like LVM snapshot, don't need consistent commit order, as they can restore out-of-order commits during crash recovery using XA). - If we have consistent commit order, we can think about optimising commit to need only one fsync (for binlog); lost commits in storage engines can then be recovered from the binlog at crash recovery by re-playing against the engine from a particular point in the binlog. - With consistent commit order, we can get better semantics for START TRANSACTION WITH CONSISTENT SNAPSHOT with multi-engine transactions (and we could even get it to return also a matching binlog position). Currently, this "CONSISTENT SNAPSHOT" can be inconsistent among multiple storage engines. - In InnoDB, the performance in the presense of hotspots can be improved if we can release row locks early in the commit phase, but this requires that we release them in the same order as commits in the binlog to ensure consistency between master and slaves. - There was some discussions around Galera [1] synchroneous replication and global transaction ID that it needed consistent commit order among participating engines. - I believe there could be other applications for guaranteed consistent commit order, and that the architecture described in this worklog can implement such guarantee with reasonable overhead. References: [1] Galera: http://www.codership.com/products/galera_replication HIGH-LEVEL SPECIFICATION: The basic idea in group commit is that multiple threads, each handling one transaction, prepare for commit and then queue up together waiting to do an fsync() on the transaction log. Then once the log is available, a single thread does the fsync() + other necessary book-keeping for all of the threads at once. After this, the single thread signals the other threads that it's done and they can finish up and return success (or failure) from the commit operation. So group commit has a parallel part, and a sequential part. So we need a facility for engines/binlog to participate in both the parallel and the sequential part. To do this, we add two new handlerton methods: int (*prepare_ordered)(handlerton *hton, THD *thd, bool all); void (*commit_ordered)(handlerton *hton, THD *thd, bool all); The idea is that the existing prepare() and commit() methods run in the parallel part of group commit, and the new prepare_ordered() and commit_ordered() run in the sequential part. The prepare_ordered() method is called after prepare(). The order of tranctions that call into prepare_ordered() is guaranteed to be the same among all storage engines and binlog, and it is serialised so no two calls can be running inside the same engine at the same time. The commit_ordered() method is called before commit(), and similarly is guaranteed to have same transaction order in all participants, and to be serialised within one engine. As the prepare_ordered() and commit_ordered() calls are serialised, the idea is that handlers should do the minimum amount of work needed in these calls, relaying most of the work (eg. fsync() ...) to prepare() and commit(). As a concrete example, for InnoDB the commit_ordered() method will do the first part of commit that fixed the commit order in the transaction log buffer, and the commit() method will write the log to disk and fsync() it. This split already exists inside the InnoDB code, running before respectively after releasing the prepare_commit_mutex. In addition, the XA transaction coordinator (TC_LOG) is special, since it is the one responsible for deciding whether to commit or rollback the transaction. For this we need an extra method, since this decision can be done only after we know that all prepare() and prepare_ordered() calls succeed, and must be done to know whether to call commit_ordered()/commit(), or do rollback. The existing method for this is TC_LOG::log_xid(). To make implementing group commit simpler to implement in a transaction coordinator and more efficient, we introduce a new method: void group_log_xid(THD *first_thd); This method runs in the sequential part of group commit. It receives a list of transactions to perform log_xid() on, in the correct commit order. (Note that TC_LOG can do parallel parts of group commit in its own prepare() and commit() methods). This method can make it easier to implement the group commit in TC_LOG, as it gets directly the list of transactions in the right order. Without it, it might need to compute such order anyway in a prepare_ordered() method, and the server has to create this ordered list anyway to implement the order guarantee for prepare_ordered() and commit_ordered(). This group_log_xid() method also is more efficient, as it avoids some inter-thread synchronisation. Since group_log_xid() is serialised, we can run it together with all the commit_ordered() method calls and need only a single sequential code section. With the log_xid() methods, we would need first a sequential part for the prepare_ordered() calls, then a parallel part with log_xid() calls (to not loose group commit ability for log_xid()), then again a sequential part for the commit_ordered() method calls. The extra synchronisation is needed, as each commit_ordered() call will have to wait for log_xid() in one thread (if log_xid() fails then commit_ordered() should not be called), and also wait for commit_ordered() to finish in all threads handling earlier commits. In effect we will need to bounce the execution from one thread to the other among all participants in the group commit. As a consequence of the group_log_xid() optimisation, handlers must be aware that the commit_ordered() call can happen in another thread than the one running commit() (so thread local storage is not available). This should not be a big issue as the THD is available for storing any needed information. Since group_log_xid() runs for multiple transactions in a single thread, it can not do error reporting (my_error()) as that relies on thread local storage. Instead it sets an error code in THD::xid_error, and if there is an error then later another method will be called (in correct thread context) to actually report the error: int xid_delayed_error(THD *thd) The three new methods prepare_ordered(), group_log_xid(), and commit_ordered() are optional (as is xid_delayed_error). A storage engine or transaction coordinator is free to not implement them if they are not needed. In this case there will be no order guarantee for the corresponding stage of group commit for that engine. For example, InnoDB needs no ordering of the prepare phase, so can omit implementing prepare_ordered(); TC_LOG_MMAP needs no ordering at all, so does not need to implement any of them. Note in particular that all existing engines (/binlog implementations if they exist) will work unmodified (and also without any change in group commit facilities or commit order guaranteed). Using these new APIs, the work will be to - In ha_commit_trans(), implement the correct semantics for the three new calls. - In XtraDB, use the new commit_ordered() call to remove the prepare_commit_mutex (and resurrect group commit) without loosing the consistency with binlog commit order. - In log.cc (binlog module), implement group_log_xid() to do group commit of multiple transactions to the binlog with a single shared fsync() call. ----------------------------------------------------------------------- Some possible alternative for this worklog: - We could eliminate the group_log_xid() method for a simpler API, at the cost of extra synchronisation between threads to do in-order commit_ordered() method calls. This would also allow to call commit_ordered() in the correct thread context. - Alternatively, we could eliminate log_xid() and require that all transaction coordinators implement group_log_xid() instead, again for some moderate simplification. - At the moment there is no plugin actually using prepare_ordered(), so, it could be removed from the design. But it fits in well, is efficient to implement, and could be useful later (eg. for the requested feature of releasing locks early in InnoDB). ----------------------------------------------------------------------- Some possible follow-up projects after this is implemented: - Add statistics about how efficient group commit is (#fsyncs/#commits in each engine and binlog). - Implement an XtraDB prepare_ordered() methods that can release row locks early (Mark Callaghan from Facebook advocates this, but need to determine exactly how to do this safely). - Implement a new crash recovery algorithm that uses the consistent commit ordering to need only fsync() for the binlog. At crash recovery, any missing transactions in an engine is replayed from the correct point in the binlog (this point must be stored transactionally inside the engine, as XtraDB already does today). - Implement that START TRANSACTION WITH CONSISTENT SNAPSHOT 1) really gets a consistent snapshow, with same set of committed and not committed transactions in all engines, 2) returns a corresponding consistent binlog position. This should be easy by piggybacking on the synchronisation implemented for ha_commit_trans(). - Use this in XtraBackup to get consistent binlog position without having to block all updates with FLUSH TABLES WITH READ LOCK. LOW-LEVEL DESIGN: 1. Changes for ha_commit_trans() The gut of the code for commit is in the function ha_commit_trans() (and in commit_one_phase() which is called from it). This must be extended to use the new prepare_ordered(), group_log_xid(), and commit_ordered() calls. 1.1 Atomic queue of committing transactions To keep the right commit order among participants, we put transactions into a queue. The operations on the queue are non-locking: - Insert THD at the head of the queue, and return old queue. THD *enqueue_atomic(THD *thd) - Fetch (and delete) the whole queue. THD *atomic_grab_reverse_queue() These are simple to implement with atomic compare-and-set. Note that there is no ABA problem [2], as we do not delete individual elements from the queue, we grab the whole queue and replace it with NULL. A transaction enters the queue when it does prepare_ordered(). This way, the scheduling order for prepare_ordered() calls is what determines the sequence in the queue and effectively the commit order. The queue is grabbed by the code doing group_log_xid() and commit_ordered() calls. The queue is passed directly to group_log_xid(), and afterwards iterated to do individual commit_ordered() calls. Using a lock-free queue allows prepare_ordered() (for one transaction) to run in parallel with commit_ordered (in another transaction), increasing potential parallelism. The queue is simply a linked list of THD objects, linked through a THD::next_commit_ordered field. Since we add at the head of the queue, the list is actually in reverse order, so must be reversed when we grab and delete it. The reason that enqueue_atomic() returns the old queue is so that we can check if an insert goes to the head of the queue. The thread at the head of the queue will do the sequential part of group commit for everyone. 1.2 Locks 1.2.1 Global LOCK_prepare_ordered This lock is taken to serialise calls to prepare_ordered(). Note that effectively, the commit order is decided by the order in which threads obtain this lock. 1.2.2 Global LOCK_group_commit and COND_group_commit This lock is used to protect the serial part of group commit. It is taken around the code where we grab the queue, call group_log_xid() on the queue, and call commit_ordered() on each element of the queue, to make sure they happen serialised and in consistent order. It also protects the variable group_commit_queue_busy, which is used when not using group_log_xid() to delay running over a new queue until the first queue is completely done. 1.2.3 Global LOCK_commit_ordered This lock is taken around calls to commit_ordered(), to ensure they happen serialised. 1.2.4 Per-thread thd->LOCK_commit_ordered and thd->COND_commit_ordered This lock protects the thd->group_commit_ready variable, as well as the condition variable used to wake up threads after log_xid() and commit_ordered() finishes. 1.2.5 Global LOCK_group_commit_queue This is only used on platforms with no native compare-and-set operations, to make the queue operations atomic. 1.3 Commit algorithm. This is the basic algorithm, simplified by - omitting some error handling - omitting looping over all handlers when invoking handler methods - omitting some possible optimisations when not all calls needed (see next section). - Omitting the case where no group_log_xid() is used, see below. ---- BEGIN ALGORITHM ---- ht->prepare() // Call prepare_ordered() and enqueue in correct commit order lock(LOCK_prepare_ordered) ht->prepare_ordered() old_queue= enqueue_atomic(thd) thd->group_commit_ready= FALSE is_group_commit_leader= (old_queue == NULL) unlock(LOCK_prepare_ordered) if (is_group_commit_leader) // The first in queue handles group commit for everyone lock(LOCK_group_commit) // Wait while queue is busy, see below for when this occurs while (group_commit_queue_busy) cond_wait(COND_group_commit) // Grab and reverse the queue to get correct order of transactions queue= atomic_grab_reverse_queue() // This call will set individual error codes in thd->xid_error // It also sets the cookie for unlog() in thd->xid_cookie group_log_xid(queue) lock(LOCK_commit_ordered) for (other IN queue) if (!other->xid_error) ht->commit_ordered() unlock(LOCK_commit_ordered) unlock(LOCK_group_commit) // Now we are done, so wake up all the others. for (other IN TAIL(queue)) lock(other->LOCK_commit_ordered) other->group_commit_ready= TRUE cond_signal(other->COND_commit_ordered) unlock(other->LOCK_commit_ordered) else // If not the leader, just wait until leader did the work for us. lock(thd->LOCK_commit_ordered) while (!thd->group_commit_ready) cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) unlock(other->LOCK_commit_ordered) // Finally do any error reporting now that we're back in own thread. if (thd->xid_error) xid_delayed_error(thd) else ht->commit(thd) unlog(thd->xid_cookie, thd->xid) ---- END ALGORITHM ---- If the transaction coordinator does not support group_log_xid(), we have to do things differently. In this case after the serialisation point at prepare_ordered(), we have to parallelise again when running log_xid() (otherwise we would loose group commit). But then when log_xid() is done, we have to serialise again to check for any error and call commit_ordered() in correct sequence for any transaction where log_xid() did not return error. The central part of the algorithm in this case (when using log_xid()) is: ---- BEGIN ALGORITHM ---- cookie= log_xid(thd) error= (cookie == 0) if (is_group_commit_leader) // The first to enqueue grabs the queue and runs first. // But we must wait until a previous queue run is fully done. lock(LOCK_group_commit) while (group_commit_queue_busy) cond_wait(COND_group_commit) queue= atomic_grab_reverse_queue() // The queue will be busy until last thread in it is done. group_commit_queue_busy= TRUE unlock(LOCK_group_commit) else // Not first in queue -> wait for previous one to wake us up. lock(thd->LOCK_commit_ordered) while (!thd->group_commit_ready) cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) unlock(other->LOCK_commit_ordered) if (!error) // Only if log_xid() was successful lock(LOCK_commit_ordered) ht->commit_ordered() unlock(LOCK_commit_ordered) // Wake up the next thread, and release queue in last. next= thd->next_commit_ordered if (next) lock(next->LOCK_commit_ordered) next->group_commit_ready= TRUE cond_signal(next->COND_commit_ordered) unlock(next->LOCK_commit_ordered) else lock(LOCK_group_commit) group_commit_queue_busy= FALSE unlock(LOCK_group_commit) ---- END ALGORITHM ---- There are a number of locks taken in the algorithm, but in the group_log_xid() case most of them should be uncontended most of the time. The LOCK_group_commit of course will be contended, as new threads queue up waiting for the previous group commit (and binlog fsync()) to finish so they can do the next group commit. This is the whole point of implementing group commit. The LOCK_prepare_ordered and LOCK_commit_ordered mutexes should be not much contended as long as handlers follow the intension of having the corresponding handler calls execute quickly. The per-thread LOCK_commit_ordered mutexes should not be contended; they are only used to wake up a sleeping thread. 1.4 Optimisations when not using all three new calls The prepare_ordered(), group_log_xid(), and commit_ordered() methods are optional, and if not implemented by a particular handler/transaction coordinator, we can optimise the algorithm to take advantage of not having to keep ordering for the missing parts. If there is no prepare_ordered(), then we need not take the LOCK_prepare_ordered mutex. If there is no commit_ordered(), then we need not take the LOCK_commit_ordered mutex. If there is no group_log_xid(), then we only need the queue to ensure same ordering of transactions for commit_ordered() as for prepare_ordered(). Thus, if either of these (or both) are also not present, we do not need to use the queue at all. 2. Binlog code changes (log.cc) The bulk of the work needed for the binary log is to extend the code to allow group commit to the log. Unlike InnoDB/XtraDB, there is no existing support inside the binlog code for group commit. The existing code runs most of the write + fsync to the binary lock under the global LOCK_log mutex, preventing any group commit. To enable group commit, this code must be split into two parts: - one part that runs per transaction, re-writing the embedded event positions for the correct offset, and writing this into the in-memory log cache. - another part that writes a set of transactions to the disk, and runs fsync(). Then in group_log_xid(), we can run the first part in a loop over all the transactions in the passed-in queue, and run the second part only once. The binlog code also has other code paths that write into the binlog, eg. non-transactional statements. These have to be adapted also to work with the new code. In order to get some group commit facility for these also, we change that part of the code in a similar way to ha_commit_trans. We keep another, binlog-internal queue of such non-transactional binlog writes, and such writes queue up here before sleeping on the LOCK_log mutex. Once a thread obtains the LOCK_log, it loops over the queue for the fast part, and does the slow part once, then finally wakes up the others in the queue. In the transactional case in group_log_xid(), before we run the passed-in queue, we add any members found in the binlog-internal queue. This allows these non-transactional writes to share the group commit. However, in the case where it is a non-transactional write that gets the LOCK_log, the transactional transactions from the ha_commit_trans() queue will not be able to take part (they will have to wait for their turn to do another fsync). It seems difficult to cleanly let the binlog code grab the queue from out of the ha_commit_trans() algorithm. I think the group commit is mostly useful in transactional workloads anyway (non-transactional engines will loose data anyway in case of crash, so why fsync() after each transaction?) 3. XtraDB changes (ha_innodb.cc) The changes needed in XtraDB are comparatively simple, as XtraDB already implements group commit, it just needs to be enabled with the new commit_ordered() call. The existing commit() method already is logically in two parts. The first part runs under the prepare_commit_mutex() and must be run in same order as binlog commit. This part needs to be moved to commit_ordered(). The second part runs after releasing prepare_commit_mutex and does transaction log write+fsync; it can remain. Then the prepare_commit_mutex is removed (and the enable_unsafe_group_commit XtraDB option to disable it). There are two asserts that check that the thread running the first part of XtraDB commit is the same as the thread running the other operations for the transaction. These have to be removed (as commit_ordered() can run in a different thread). Also an error reporting with sql_print_error() has to be delayed until commit() time. 4. Proof-of-concept implementation There is a proof-of-concept implementation of this architecture, in the form of a quilt patch series [3]. A quick benchmark was done, with sync_binlog=1 and innodb_flush_log_at_trx_commit=1. 64 parallel threads doing single-row transactions against one table. Without the patch, we get only 25 queries per second. With the patch, we get 650 queries per second. 5. Open issues/tasks 5.1 XA / other prepare() and commit() call sites. Check that user-level XA is handled correctly and working. And covered sufficiently with tests. Also check that any other calls of ha->prepare() and ha->commit() outside of ha_commit_trans() are handled correctly. 5.2 Testing This worklog needs additions to the test suite, including error inserts to check error handling, and synchronisation points to check thread parallelism correctness. 6. Alternative implementations - The binlog code maintains its own extra atomic transaction queue to handle non-transactional commits in a good way together with transactional (with respect to group commit). Alternatively, we could ignore this issue and just give up on group commit for non-transactional statements, for some code simplifications. - The binlog code has two ways to prepare end_event and similar, one that uses stack-allocation, and another for when stack allocation is not possible that uses thd->mem_root. Probably the overhead of thd->mem_root is so small that it would make sense to use the same code for both cases. - Instead of adding extra fields to THD, we could allocate a separate structure on the thd->mem_root() with the required extra fields (including the THD pointer). Would seem to require initialising mutexes at every commit though. - It would probably be a good idea to implement TC_LOG_MMAP::group_log_xid() (should not be hard). ----------------------------------------------------------------------- References: [2] https://secure.wikimedia.org/wikipedia/en/wiki/ABA_problem [3] https://knielsen-hq.org/maria/patches.mwl116/ ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Progress (by Knielsen): Efficient group commit for binary log (116)
by worklog-noreply＠askmonty.org 07 Jun '10

07 Jun '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Efficient group commit for binary log CREATION DATE..: Mon, 26 Apr 2010, 13:28 SUPERVISOR.....: Knielsen IMPLEMENTOR....: Knielsen COPIES TO......: Serg CATEGORY.......: Server-RawIdeaBin TASK ID........: 116 (http://askmonty.org/worklog/?tid=116) VERSION........: Server-9.x STATUS.........: Assigned PRIORITY.......: 60 WORKED HOURS...: 74 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Knielsen - Mon, 07 Jun 2010, 07:16)=-=- Missing hours in previous progress report. Worked 3 hours and estimate 0 hours remain (original estimate increased by 3 hours). -=-=(Knielsen - Mon, 07 Jun 2010, 07:15)=-=- Some more benchmarking. Blog about results and architecture. Fix two bugs in the proof-of-concept patch, races that causes hangs in benchmarks. Worked 11 hours and estimate 0 hours remain (original estimate increased by 11 hours). -=-=(Guest - Tue, 01 Jun 2010, 14:20)=-=- Status updated. --- /tmp/wklog.116.old.32652 2010-06-01 14:20:15.000000000 +0000 +++ /tmp/wklog.116.new.32652 2010-06-01 14:20:15.000000000 +0000 @@ -1 +1 @@ -Un-Assigned +Assigned -=-=(Knielsen - Mon, 31 May 2010, 06:48)=-=- Finish first architecture draft (changed my mind a number of times before I was satisfied). Write up architecture in worklog. Fix remaining test failures in proof-of-concept patch + implement xtradb part. Run some benchmarks on proof-of-concept implementation. Worked 11 hours and estimate 0 hours remain (original estimate increased by 11 hours). -=-=(Knielsen - Tue, 25 May 2010, 13:19)=-=- Low Level Design modified. --- /tmp/wklog.116.old.14255 2010-05-25 13:19:00.000000000 +0000 +++ /tmp/wklog.116.new.14255 2010-05-25 13:19:00.000000000 +0000 @@ -1 +1,363 @@ +1. Changes for ha_commit_trans() + +The gut of the code for commit is in the function ha_commit_trans() (and in +commit_one_phase() which is called from it). This must be extended to use the +new prepare_ordered(), group_log_xid(), and commit_ordered() calls. + +1.1 Atomic queue of committing transactions + +To keep the right commit order among participants, we put transactions into a +queue. The operations on the queue are non-locking: + + - Insert THD at the head of the queue, and return old queue. + + THD *enqueue_atomic(THD *thd) + + - Fetch (and delete) the whole queue. + + THD *atomic_grab_reverse_queue() + +These are simple to implement with atomic compare-and-set. Note that there is +no ABA problem [2], as we do not delete individual elements from the queue, we +grab the whole queue and replace it with NULL. + +A transaction enters the queue when it does prepare_ordered(). This way, the +scheduling order for prepare_ordered() calls is what determines the sequence +in the queue and effectively the commit order. + +The queue is grabbed by the code doing group_log_xid() and commit_ordered() +calls. The queue is passed directly to group_log_xid(), and afterwards +iterated to do individual commit_ordered() calls. + +Using a lock-free queue allows prepare_ordered() (for one transaction) to run +in parallel with commit_ordered (in another transaction), increasing potential +parallelism. + +The queue is simply a linked list of THD objects, linked through a +THD::next_commit_ordered field. Since we add at the head of the queue, the +list is actually in reverse order, so must be reversed when we grab and delete +it. + +The reason that enqueue_atomic() returns the old queue is so that we can check +if an insert goes to the head of the queue. The thread at the head of the +queue will do the sequential part of group commit for everyone. + + +1.2 Locks + +1.2.1 Global LOCK_prepare_ordered + +This lock is taken to serialise calls to prepare_ordered(). Note that +effectively, the commit order is decided by the order in which threads obtain +this lock. + + +1.2.2 Global LOCK_group_commit and COND_group_commit + +This lock is used to protect the serial part of group commit. It is taken +around the code where we grab the queue, call group_log_xid() on the queue, +and call commit_ordered() on each element of the queue, to make sure they +happen serialised and in consistent order. It also protects the variable +group_commit_queue_busy, which is used when not using group_log_xid() to delay +running over a new queue until the first queue is completely done. + + +1.2.3 Global LOCK_commit_ordered + +This lock is taken around calls to commit_ordered(), to ensure they happen +serialised. + + +1.2.4 Per-thread thd->LOCK_commit_ordered and thd->COND_commit_ordered + +This lock protects the thd->group_commit_ready variable, as well as the +condition variable used to wake up threads after log_xid() and +commit_ordered() finishes. + + +1.2.5 Global LOCK_group_commit_queue + +This is only used on platforms with no native compare-and-set operations, to +make the queue operations atomic. + + +1.3 Commit algorithm. + +This is the basic algorithm, simplified by + + - omitting some error handling + + - omitting looping over all handlers when invoking handler methods + + - omitting some possible optimisations when not all calls needed (see next + section). + + - Omitting the case where no group_log_xid() is used, see below. + +---- BEGIN ALGORITHM ---- + ht->prepare() + + // Call prepare_ordered() and enqueue in correct commit order + lock(LOCK_prepare_ordered) + ht->prepare_ordered() + old_queue= enqueue_atomic(thd) + thd->group_commit_ready= FALSE + is_group_commit_leader= (old_queue == NULL) + unlock(LOCK_prepare_ordered) + + if (is_group_commit_leader) + + // The first in queue handles group commit for everyone + + lock(LOCK_group_commit) + // Wait while queue is busy, see below for when this occurs + while (group_commit_queue_busy) + cond_wait(COND_group_commit) + + // Grab and reverse the queue to get correct order of transactions + queue= atomic_grab_reverse_queue() + + // This call will set individual error codes in thd->xid_error + // It also sets the cookie for unlog() in thd->xid_cookie + group_log_xid(queue) + + lock(LOCK_commit_ordered) + for (other IN queue) + if (!other->xid_error) + ht->commit_ordered() + unlock(LOCK_commit_ordered) + + unlock(LOCK_group_commit) + + // Now we are done, so wake up all the others. + for (other IN TAIL(queue)) + lock(other->LOCK_commit_ordered) + other->group_commit_ready= TRUE + cond_signal(other->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + else + // If not the leader, just wait until leader did the work for us. + lock(thd->LOCK_commit_ordered) + while (!thd->group_commit_ready) + cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + + // Finally do any error reporting now that we're back in own thread. + if (thd->xid_error) + xid_delayed_error(thd) + else + ht->commit(thd) + unlog(thd->xid_cookie, thd->xid) +---- END ALGORITHM ---- + +If the transaction coordinator does not support group_log_xid(), we have to do +things differently. In this case after the serialisation point at +prepare_ordered(), we have to parallelise again when running log_xid() +(otherwise we would loose group commit). But then when log_xid() is done, we +have to serialise again to check for any error and call commit_ordered() in +correct sequence for any transaction where log_xid() did not return error. + +The central part of the algorithm in this case (when using log_xid()) is: + +---- BEGIN ALGORITHM ---- + cookie= log_xid(thd) + error= (cookie == 0) + + if (is_group_commit_leader) + + // The first to enqueue grabs the queue and runs first. + // But we must wait until a previous queue run is fully done. + + lock(LOCK_group_commit) + while (group_commit_queue_busy) + cond_wait(COND_group_commit) + queue= atomic_grab_reverse_queue() + // The queue will be busy until last thread in it is done. + group_commit_queue_busy= TRUE + unlock(LOCK_group_commit) + else + // Not first in queue -> wait for previous one to wake us up. + lock(thd->LOCK_commit_ordered) + while (!thd->group_commit_ready) + cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + + if (!error) // Only if log_xid() was successful + lock(LOCK_commit_ordered) + ht->commit_ordered() + unlock(LOCK_commit_ordered) + + // Wake up the next thread, and release queue in last. + next= thd->next_commit_ordered + + if (next) + lock(next->LOCK_commit_ordered) + next->group_commit_ready= TRUE + cond_signal(next->COND_commit_ordered) + unlock(next->LOCK_commit_ordered) + else + lock(LOCK_group_commit) + group_commit_queue_busy= FALSE + unlock(LOCK_group_commit) +---- END ALGORITHM ---- + +There are a number of locks taken in the algorithm, but in the group_log_xid() +case most of them should be uncontended most of the time. The +LOCK_group_commit of course will be contended, as new threads queue up waiting +for the previous group commit (and binlog fsync()) to finish so they can do +the next group commit. This is the whole point of implementing group commit. + +The LOCK_prepare_ordered and LOCK_commit_ordered mutexes should be not much +contended as long as handlers follow the intension of having the corresponding +handler calls execute quickly. + +The per-thread LOCK_commit_ordered mutexes should not be contended; they are +only used to wake up a sleeping thread. + + +1.4 Optimisations when not using all three new calls + + +The prepare_ordered(), group_log_xid(), and commit_ordered() methods are +optional, and if not implemented by a particular handler/transaction +coordinator, we can optimise the algorithm to take advantage of not having to +keep ordering for the missing parts. + +If there is no prepare_ordered(), then we need not take the +LOCK_prepare_ordered mutex. + +If there is no commit_ordered(), then we need not take the LOCK_commit_ordered +mutex. + +If there is no group_log_xid(), then we only need the queue to ensure same +ordering of transactions for commit_ordered() as for prepare_ordered(). Thus, +if either of these (or both) are also not present, we do not need to use the +queue at all. + + +2. Binlog code changes (log.cc) + + +The bulk of the work needed for the binary log is to extend the code to allow +group commit to the log. Unlike InnoDB/XtraDB, there is no existing support +inside the binlog code for group commit. + +The existing code runs most of the write + fsync to the binary lock under the +global LOCK_log mutex, preventing any group commit. + +To enable group commit, this code must be split into two parts: + + - one part that runs per transaction, re-writing the embedded event positions + for the correct offset, and writing this into the in-memory log cache. + + - another part that writes a set of transactions to the disk, and runs + fsync(). + +Then in group_log_xid(), we can run the first part in a loop over all the +transactions in the passed-in queue, and run the second part only once. + +The binlog code also has other code paths that write into the binlog, +eg. non-transactional statements. These have to be adapted also to work with +the new code. + +In order to get some group commit facility for these also, we change that part +of the code in a similar way to ha_commit_trans. We keep another, +binlog-internal queue of such non-transactional binlog writes, and such writes +queue up here before sleeping on the LOCK_log mutex. Once a thread obtains the +LOCK_log, it loops over the queue for the fast part, and does the slow part +once, then finally wakes up the others in the queue. + +In the transactional case in group_log_xid(), before we run the passed-in +queue, we add any members found in the binlog-internal queue. This allows +these non-transactional writes to share the group commit. + +However, in the case where it is a non-transactional write that gets the +LOCK_log, the transactional transactions from the ha_commit_trans() queue will +not be able to take part (they will have to wait for their turn to do another +fsync). It seems difficult to cleanly let the binlog code grab the queue from +out of the ha_commit_trans() algorithm. I think the group commit is mostly +useful in transactional workloads anyway (non-transactional engines will loose +data anyway in case of crash, so why fsync() after each transaction?) + + +3. XtraDB changes (ha_innodb.cc) + +The changes needed in XtraDB are comparatively simple, as XtraDB already +implements group commit, it just needs to be enabled with the new +commit_ordered() call. + +The existing commit() method already is logically in two parts. The first part +runs under the prepare_commit_mutex() and must be run in same order as binlog +commit. This part needs to be moved to commit_ordered(). The second part runs +after releasing prepare_commit_mutex and does transaction log write+fsync; it +can remain. + +Then the prepare_commit_mutex is removed (and the enable_unsafe_group_commit +XtraDB option to disable it). + +There are two asserts that check that the thread running the first part of +XtraDB commit is the same as the thread running the other operations for the +transaction. These have to be removed (as commit_ordered() can run in a +different thread). Also an error reporting with sql_print_error() has to be +delayed until commit() time. + + +4. Proof-of-concept implementation + +There is a proof-of-concept implementation of this architecture, in the form +of a quilt patch series [3]. + +A quick benchmark was done, with sync_binlog=1 and +innodb_flush_log_at_trx_commit=1. 64 parallel threads doing single-row +transactions against one table. + +Without the patch, we get only 25 queries per second. + +With the patch, we get 650 queries per second. + + +5. Open issues/tasks + +5.1 XA / other prepare() and commit() call sites. + +Check that user-level XA is handled correctly and working. And covered +sufficiently with tests. Also check that any other calls of ha->prepare() and +ha->commit() outside of ha_commit_trans() are handled correctly. + +5.2 Testing + +This worklog needs additions to the test suite, including error inserts to +check error handling, and synchronisation points to check thread parallelism +correctness. + + +6. Alternative implementations + + - The binlog code maintains its own extra atomic transaction queue to handle + non-transactional commits in a good way together with transactional (with + respect to group commit). Alternatively, we could ignore this issue and + just give up on group commit for non-transactional statements, for some + code simplifications. + + - The binlog code has two ways to prepare end_event and similar, one that + uses stack-allocation, and another for when stack allocation is not + possible that uses thd->mem_root. Probably the overhead of thd->mem_root is + so small that it would make sense to use the same code for both cases. + + - Instead of adding extra fields to THD, we could allocate a separate + structure on the thd->mem_root() with the required extra fields (including + the THD pointer). Would seem to require initialising mutexes at every + commit though. + + - It would probably be a good idea to implement TC_LOG_MMAP::group_log_xid() + (should not be hard). + + +----------------------------------------------------------------------- + +References: + +[2] https://secure.wikimedia.org/wikipedia/en/wiki/ABA_problem + +[3] https://knielsen-hq.org/maria/patches.mwl116/ -=-=(Knielsen - Tue, 25 May 2010, 13:18)=-=- High-Level Specification modified. --- /tmp/wklog.116.old.14249 2010-05-25 13:18:34.000000000 +0000 +++ /tmp/wklog.116.new.14249 2010-05-25 13:18:34.000000000 +0000 @@ -1 +1,157 @@ +The basic idea in group commit is that multiple threads, each handling one +transaction, prepare for commit and then queue up together waiting to do an +fsync() on the transaction log. Then once the log is available, a single +thread does the fsync() + other necessary book-keeping for all of the threads +at once. After this, the single thread signals the other threads that it's +done and they can finish up and return success (or failure) from the commit +operation. + +So group commit has a parallel part, and a sequential part. So we need a +facility for engines/binlog to participate in both the parallel and the +sequential part. + +To do this, we add two new handlerton methods: + + int (*prepare_ordered)(handlerton *hton, THD *thd, bool all); + void (*commit_ordered)(handlerton *hton, THD *thd, bool all); + +The idea is that the existing prepare() and commit() methods run in the +parallel part of group commit, and the new prepare_ordered() and +commit_ordered() run in the sequential part. + +The prepare_ordered() method is called after prepare(). The order of +tranctions that call into prepare_ordered() is guaranteed to be the same among +all storage engines and binlog, and it is serialised so no two calls can be +running inside the same engine at the same time. + +The commit_ordered() method is called before commit(), and similarly is +guaranteed to have same transaction order in all participants, and to be +serialised within one engine. + +As the prepare_ordered() and commit_ordered() calls are serialised, the idea +is that handlers should do the minimum amount of work needed in these calls, +relaying most of the work (eg. fsync() ...) to prepare() and commit(). + +As a concrete example, for InnoDB the commit_ordered() method will do the +first part of commit that fixed the commit order in the transaction log +buffer, and the commit() method will write the log to disk and fsync() +it. This split already exists inside the InnoDB code, running before +respectively after releasing the prepare_commit_mutex. + +In addition, the XA transaction coordinator (TC_LOG) is special, since it is +the one responsible for deciding whether to commit or rollback the +transaction. For this we need an extra method, since this decision can be done +only after we know that all prepare() and prepare_ordered() calls succeed, and +must be done to know whether to call commit_ordered()/commit(), or do rollback. + +The existing method for this is TC_LOG::log_xid(). To make implementing group +commit simpler to implement in a transaction coordinator and more efficient, +we introduce a new method: + + void group_log_xid(THD *first_thd); + +This method runs in the sequential part of group commit. It receives a list of +transactions to perform log_xid() on, in the correct commit order. (Note that +TC_LOG can do parallel parts of group commit in its own prepare() and commit() +methods). + +This method can make it easier to implement the group commit in TC_LOG, as it +gets directly the list of transactions in the right order. Without it, it +might need to compute such order anyway in a prepare_ordered() method, and the +server has to create this ordered list anyway to implement the order guarantee +for prepare_ordered() and commit_ordered(). + +This group_log_xid() method also is more efficient, as it avoids some +inter-thread synchronisation. Since group_log_xid() is serialised, we can run +it together with all the commit_ordered() method calls and need only a single +sequential code section. With the log_xid() methods, we would need first a +sequential part for the prepare_ordered() calls, then a parallel part with +log_xid() calls (to not loose group commit ability for log_xid()), then again +a sequential part for the commit_ordered() method calls. + +The extra synchronisation is needed, as each commit_ordered() call will have +to wait for log_xid() in one thread (if log_xid() fails then commit_ordered() +should not be called), and also wait for commit_ordered() to finish in all +threads handling earlier commits. In effect we will need to bounce the +execution from one thread to the other among all participants in the group +commit. + +As a consequence of the group_log_xid() optimisation, handlers must be aware +that the commit_ordered() call can happen in another thread than the one +running commit() (so thread local storage is not available). This should not +be a big issue as the THD is available for storing any needed information. + +Since group_log_xid() runs for multiple transactions in a single thread, it +can not do error reporting (my_error()) as that relies on thread local +storage. Instead it sets an error code in THD::xid_error, and if there is an +error then later another method will be called (in correct thread context) to +actually report the error: + + int xid_delayed_error(THD *thd) + +The three new methods prepare_ordered(), group_log_xid(), and commit_ordered() +are optional (as is xid_delayed_error). A storage engine or transaction +coordinator is free to not implement them if they are not needed. In this case +there will be no order guarantee for the corresponding stage of group commit +for that engine. For example, InnoDB needs no ordering of the prepare phase, +so can omit implementing prepare_ordered(); TC_LOG_MMAP needs no ordering at +all, so does not need to implement any of them. + +Note in particular that all existing engines (/binlog implementations if they +exist) will work unmodified (and also without any change in group commit +facilities or commit order guaranteed). + +Using these new APIs, the work will be to + + - In ha_commit_trans(), implement the correct semantics for the three new + calls. + + - In XtraDB, use the new commit_ordered() call to remove the + prepare_commit_mutex (and resurrect group commit) without loosing the + consistency with binlog commit order. + + - In log.cc (binlog module), implement group_log_xid() to do group commit of + multiple transactions to the binlog with a single shared fsync() call. + +----------------------------------------------------------------------- +Some possible alternative for this worklog: + + - We could eliminate the group_log_xid() method for a simpler API, at the + cost of extra synchronisation between threads to do in-order + commit_ordered() method calls. This would also allow to call + commit_ordered() in the correct thread context. + + - Alternatively, we could eliminate log_xid() and require that all + transaction coordinators implement group_log_xid() instead, again for some + moderate simplification. + + - At the moment there is no plugin actually using prepare_ordered(), so, it + could be removed from the design. But it fits in well, is efficient to + implement, and could be useful later (eg. for the requested feature of + releasing locks early in InnoDB). + +----------------------------------------------------------------------- +Some possible follow-up projects after this is implemented: + + - Add statistics about how efficient group commit is (#fsyncs/#commits in + each engine and binlog). + + - Implement an XtraDB prepare_ordered() methods that can release row locks + early (Mark Callaghan from Facebook advocates this, but need to determine + exactly how to do this safely). + + - Implement a new crash recovery algorithm that uses the consistent commit + ordering to need only fsync() for the binlog. At crash recovery, any + missing transactions in an engine is replayed from the correct point in the + binlog (this point must be stored transactionally inside the engine, as + XtraDB already does today). + + - Implement that START TRANSACTION WITH CONSISTENT SNAPSHOT 1) really gets a + consistent snapshow, with same set of committed and not committed + transactions in all engines, 2) returns a corresponding consistent binlog + position. This should be easy by piggybacking on the synchronisation + implemented for ha_commit_trans(). + + - Use this in XtraBackup to get consistent binlog position without having to + block all updates with FLUSH TABLES WITH READ LOCK. -=-=(Knielsen - Tue, 25 May 2010, 13:18)=-=- High Level Description modified. --- /tmp/wklog.116.old.14234 2010-05-25 13:18:07.000000000 +0000 +++ /tmp/wklog.116.new.14234 2010-05-25 13:18:07.000000000 +0000 @@ -21,3 +21,69 @@ http://kristiannielsen.livejournal.com/12408.html http://kristiannielsen.livejournal.com/12553.html +---- + +Implementing group commit in MySQL faces some challenges from the handler +plugin architecture: + +1. Because storage engine handlers have separate transaction log from the +mysql binlog (and from each other), there are multiple fsync() calls per +commit that need the group commit optimisation (2 per participating storage +engine + 1 for binlog). + +2. The code handling commit is split in several places, in main server code +and in storage engine code. With pluggable binlog it will be split even +more. This requires a good abstract yet powerful API to be able to implement +group commit simply and efficiently in plugins without the different parts +having to rely on iternals of the others. + +3. We want the order of commits to be the same in all engines participating in +multiple transactions. This requirement is the reason that InnoDB currently +breaks group commit with the infamous prepare_commit_mutex. + +While currently there is no server guarantee to get same commit order in +engines an binlog (except for the InnoDB prepare_commit_mutex hack), there are +several reasons why this could be desirable: + + - InnoDB hot backup needs to be able to extract a binlog position that is + consistent with the hot backup to be able to provision a new slave, and + this is impossible without imposing at least partial consistent ordering + between InnoDB and binlog. + + - Other backup methods could have similar needs, eg. XtraBackup or + `mysqldump --single-transaction`, to have consistent commit order between + binlog and storage engines without having to do FLUSH TABLES WITH READ LOCK + or similar expensive blocking operation. (other backup methods, like LVM + snapshot, don't need consistent commit order, as they can restore + out-of-order commits during crash recovery using XA). + + - If we have consistent commit order, we can think about optimising commit to + need only one fsync (for binlog); lost commits in storage engines can then + be recovered from the binlog at crash recovery by re-playing against the + engine from a particular point in the binlog. + + - With consistent commit order, we can get better semantics for START + TRANSACTION WITH CONSISTENT SNAPSHOT with multi-engine transactions (and we + could even get it to return also a matching binlog position). Currently, + this "CONSISTENT SNAPSHOT" can be inconsistent among multiple storage + engines. + + - In InnoDB, the performance in the presense of hotspots can be improved if + we can release row locks early in the commit phase, but this requires that we +release them in + the same order as commits in the binlog to ensure consistency between + master and slaves. + + - There was some discussions around Galera [1] synchroneous replication and + global transaction ID that it needed consistent commit order among + participating engines. + + - I believe there could be other applications for guaranteed consistent + commit order, and that the architecture described in this worklog can + implement such guarantee with reasonable overhead. + + +References: + +[1] Galera: http://www.codership.com/products/galera_replication + -=-=(Knielsen - Tue, 25 May 2010, 08:28)=-=- More thoughts on and changes to the archtecture. Got to something now that I am satisfied with and that seems to be able to handle all issues. Implement new prepare_ordered and commit_ordered handler methods and the logic in ha_commit_trans(). Implement TC_LOG::group_log_xid() method and logic in ha_commit_trans(). Implement XtraDB part, using commit_ordered() rather than prepare_commit_mutex. Fix test suite failures. Proof-of-concept patch series complete now. Do initial benchmark, getting good results. With 64 threads, see 26x improvement in queries-per-sec. Next step: write up the architecture description. Worked 21 hours and estimate 0 hours remain (original estimate increased by 21 hours). -=-=(Knielsen - Wed, 12 May 2010, 06:41)=-=- Started work on a Quilt patch series, refactoring the binlog code to prepare for implementing the group commit, and working on the design of group commit in parallel. Found and fixed several problems in error handling when writing to binlog. Removed redundant table map version locking. Split binlog writing into two parts in preparations for group commit. When ready to write to the binlog, threads enter a queue, and the first thread in the queue handles the binlog writing for everyone. When it obtains the LOCK_log, it first loops over all threads, executing the first part of binlog writing (the write(2) syscall essentially). It then runs the second part (fsync(2) essentially) only once, and then wakes up the remaining threads in the queue. Still to be done: Finish the proof-of-concept group commit patch, by 1) implementing the prepare_fast() and commit_fast() callbacks in handler.cc 2) move the binlog thread enqueue from log_xid() to binlog_prepare_fast(), 3) move fast part of InnoDB commit to innobase_commit_fast(), removing the prepare_commit_mutex(). Write up the final design in this worklog. Evaluate the design to see if we can do better/different. Think about possible next steps, such as releasing innodb row locks early (in innobase_prepare_fast), and doing crash recovery by replaying transactions from the binlog (removing the need for engine durability and 2 of 3 fsync() in commit). Worked 28 hours and estimate 0 hours remain (original estimate increased by 28 hours). -=-=(Serg - Mon, 26 Apr 2010, 14:10)=-=- Observers changed: Serg DESCRIPTION: Currently, in order to ensure that the server can recover after a crash to a state in which storage engines and binary log are consistent with each other, it is necessary to use XA with durable commits for both storage engines (innodb_flush_log_at_trx_commit=1) and binary log (sync_binlog=1). This is _very_ expensive, since the server needs to do three fsync() operations for every commit, as there is no working group commit when the binary log is enabled. The idea is to - Implement/fix group commit to work properly with the binary log enabled. - (Optionally) avoid the need to fsync() in the engine, and instead rely on replaying any lost transactions from the binary log against the engine during crash recovery. For background see these articles: http://kristiannielsen.livejournal.com/12254.html http://kristiannielsen.livejournal.com/12408.html http://kristiannielsen.livejournal.com/12553.html ---- Implementing group commit in MySQL faces some challenges from the handler plugin architecture: 1. Because storage engine handlers have separate transaction log from the mysql binlog (and from each other), there are multiple fsync() calls per commit that need the group commit optimisation (2 per participating storage engine + 1 for binlog). 2. The code handling commit is split in several places, in main server code and in storage engine code. With pluggable binlog it will be split even more. This requires a good abstract yet powerful API to be able to implement group commit simply and efficiently in plugins without the different parts having to rely on iternals of the others. 3. We want the order of commits to be the same in all engines participating in multiple transactions. This requirement is the reason that InnoDB currently breaks group commit with the infamous prepare_commit_mutex. While currently there is no server guarantee to get same commit order in engines an binlog (except for the InnoDB prepare_commit_mutex hack), there are several reasons why this could be desirable: - InnoDB hot backup needs to be able to extract a binlog position that is consistent with the hot backup to be able to provision a new slave, and this is impossible without imposing at least partial consistent ordering between InnoDB and binlog. - Other backup methods could have similar needs, eg. XtraBackup or `mysqldump --single-transaction`, to have consistent commit order between binlog and storage engines without having to do FLUSH TABLES WITH READ LOCK or similar expensive blocking operation. (other backup methods, like LVM snapshot, don't need consistent commit order, as they can restore out-of-order commits during crash recovery using XA). - If we have consistent commit order, we can think about optimising commit to need only one fsync (for binlog); lost commits in storage engines can then be recovered from the binlog at crash recovery by re-playing against the engine from a particular point in the binlog. - With consistent commit order, we can get better semantics for START TRANSACTION WITH CONSISTENT SNAPSHOT with multi-engine transactions (and we could even get it to return also a matching binlog position). Currently, this "CONSISTENT SNAPSHOT" can be inconsistent among multiple storage engines. - In InnoDB, the performance in the presense of hotspots can be improved if we can release row locks early in the commit phase, but this requires that we release them in the same order as commits in the binlog to ensure consistency between master and slaves. - There was some discussions around Galera [1] synchroneous replication and global transaction ID that it needed consistent commit order among participating engines. - I believe there could be other applications for guaranteed consistent commit order, and that the architecture described in this worklog can implement such guarantee with reasonable overhead. References: [1] Galera: http://www.codership.com/products/galera_replication HIGH-LEVEL SPECIFICATION: The basic idea in group commit is that multiple threads, each handling one transaction, prepare for commit and then queue up together waiting to do an fsync() on the transaction log. Then once the log is available, a single thread does the fsync() + other necessary book-keeping for all of the threads at once. After this, the single thread signals the other threads that it's done and they can finish up and return success (or failure) from the commit operation. So group commit has a parallel part, and a sequential part. So we need a facility for engines/binlog to participate in both the parallel and the sequential part. To do this, we add two new handlerton methods: int (*prepare_ordered)(handlerton *hton, THD *thd, bool all); void (*commit_ordered)(handlerton *hton, THD *thd, bool all); The idea is that the existing prepare() and commit() methods run in the parallel part of group commit, and the new prepare_ordered() and commit_ordered() run in the sequential part. The prepare_ordered() method is called after prepare(). The order of tranctions that call into prepare_ordered() is guaranteed to be the same among all storage engines and binlog, and it is serialised so no two calls can be running inside the same engine at the same time. The commit_ordered() method is called before commit(), and similarly is guaranteed to have same transaction order in all participants, and to be serialised within one engine. As the prepare_ordered() and commit_ordered() calls are serialised, the idea is that handlers should do the minimum amount of work needed in these calls, relaying most of the work (eg. fsync() ...) to prepare() and commit(). As a concrete example, for InnoDB the commit_ordered() method will do the first part of commit that fixed the commit order in the transaction log buffer, and the commit() method will write the log to disk and fsync() it. This split already exists inside the InnoDB code, running before respectively after releasing the prepare_commit_mutex. In addition, the XA transaction coordinator (TC_LOG) is special, since it is the one responsible for deciding whether to commit or rollback the transaction. For this we need an extra method, since this decision can be done only after we know that all prepare() and prepare_ordered() calls succeed, and must be done to know whether to call commit_ordered()/commit(), or do rollback. The existing method for this is TC_LOG::log_xid(). To make implementing group commit simpler to implement in a transaction coordinator and more efficient, we introduce a new method: void group_log_xid(THD *first_thd); This method runs in the sequential part of group commit. It receives a list of transactions to perform log_xid() on, in the correct commit order. (Note that TC_LOG can do parallel parts of group commit in its own prepare() and commit() methods). This method can make it easier to implement the group commit in TC_LOG, as it gets directly the list of transactions in the right order. Without it, it might need to compute such order anyway in a prepare_ordered() method, and the server has to create this ordered list anyway to implement the order guarantee for prepare_ordered() and commit_ordered(). This group_log_xid() method also is more efficient, as it avoids some inter-thread synchronisation. Since group_log_xid() is serialised, we can run it together with all the commit_ordered() method calls and need only a single sequential code section. With the log_xid() methods, we would need first a sequential part for the prepare_ordered() calls, then a parallel part with log_xid() calls (to not loose group commit ability for log_xid()), then again a sequential part for the commit_ordered() method calls. The extra synchronisation is needed, as each commit_ordered() call will have to wait for log_xid() in one thread (if log_xid() fails then commit_ordered() should not be called), and also wait for commit_ordered() to finish in all threads handling earlier commits. In effect we will need to bounce the execution from one thread to the other among all participants in the group commit. As a consequence of the group_log_xid() optimisation, handlers must be aware that the commit_ordered() call can happen in another thread than the one running commit() (so thread local storage is not available). This should not be a big issue as the THD is available for storing any needed information. Since group_log_xid() runs for multiple transactions in a single thread, it can not do error reporting (my_error()) as that relies on thread local storage. Instead it sets an error code in THD::xid_error, and if there is an error then later another method will be called (in correct thread context) to actually report the error: int xid_delayed_error(THD *thd) The three new methods prepare_ordered(), group_log_xid(), and commit_ordered() are optional (as is xid_delayed_error). A storage engine or transaction coordinator is free to not implement them if they are not needed. In this case there will be no order guarantee for the corresponding stage of group commit for that engine. For example, InnoDB needs no ordering of the prepare phase, so can omit implementing prepare_ordered(); TC_LOG_MMAP needs no ordering at all, so does not need to implement any of them. Note in particular that all existing engines (/binlog implementations if they exist) will work unmodified (and also without any change in group commit facilities or commit order guaranteed). Using these new APIs, the work will be to - In ha_commit_trans(), implement the correct semantics for the three new calls. - In XtraDB, use the new commit_ordered() call to remove the prepare_commit_mutex (and resurrect group commit) without loosing the consistency with binlog commit order. - In log.cc (binlog module), implement group_log_xid() to do group commit of multiple transactions to the binlog with a single shared fsync() call. ----------------------------------------------------------------------- Some possible alternative for this worklog: - We could eliminate the group_log_xid() method for a simpler API, at the cost of extra synchronisation between threads to do in-order commit_ordered() method calls. This would also allow to call commit_ordered() in the correct thread context. - Alternatively, we could eliminate log_xid() and require that all transaction coordinators implement group_log_xid() instead, again for some moderate simplification. - At the moment there is no plugin actually using prepare_ordered(), so, it could be removed from the design. But it fits in well, is efficient to implement, and could be useful later (eg. for the requested feature of releasing locks early in InnoDB). ----------------------------------------------------------------------- Some possible follow-up projects after this is implemented: - Add statistics about how efficient group commit is (#fsyncs/#commits in each engine and binlog). - Implement an XtraDB prepare_ordered() methods that can release row locks early (Mark Callaghan from Facebook advocates this, but need to determine exactly how to do this safely). - Implement a new crash recovery algorithm that uses the consistent commit ordering to need only fsync() for the binlog. At crash recovery, any missing transactions in an engine is replayed from the correct point in the binlog (this point must be stored transactionally inside the engine, as XtraDB already does today). - Implement that START TRANSACTION WITH CONSISTENT SNAPSHOT 1) really gets a consistent snapshow, with same set of committed and not committed transactions in all engines, 2) returns a corresponding consistent binlog position. This should be easy by piggybacking on the synchronisation implemented for ha_commit_trans(). - Use this in XtraBackup to get consistent binlog position without having to block all updates with FLUSH TABLES WITH READ LOCK. LOW-LEVEL DESIGN: 1. Changes for ha_commit_trans() The gut of the code for commit is in the function ha_commit_trans() (and in commit_one_phase() which is called from it). This must be extended to use the new prepare_ordered(), group_log_xid(), and commit_ordered() calls. 1.1 Atomic queue of committing transactions To keep the right commit order among participants, we put transactions into a queue. The operations on the queue are non-locking: - Insert THD at the head of the queue, and return old queue. THD *enqueue_atomic(THD *thd) - Fetch (and delete) the whole queue. THD *atomic_grab_reverse_queue() These are simple to implement with atomic compare-and-set. Note that there is no ABA problem [2], as we do not delete individual elements from the queue, we grab the whole queue and replace it with NULL. A transaction enters the queue when it does prepare_ordered(). This way, the scheduling order for prepare_ordered() calls is what determines the sequence in the queue and effectively the commit order. The queue is grabbed by the code doing group_log_xid() and commit_ordered() calls. The queue is passed directly to group_log_xid(), and afterwards iterated to do individual commit_ordered() calls. Using a lock-free queue allows prepare_ordered() (for one transaction) to run in parallel with commit_ordered (in another transaction), increasing potential parallelism. The queue is simply a linked list of THD objects, linked through a THD::next_commit_ordered field. Since we add at the head of the queue, the list is actually in reverse order, so must be reversed when we grab and delete it. The reason that enqueue_atomic() returns the old queue is so that we can check if an insert goes to the head of the queue. The thread at the head of the queue will do the sequential part of group commit for everyone. 1.2 Locks 1.2.1 Global LOCK_prepare_ordered This lock is taken to serialise calls to prepare_ordered(). Note that effectively, the commit order is decided by the order in which threads obtain this lock. 1.2.2 Global LOCK_group_commit and COND_group_commit This lock is used to protect the serial part of group commit. It is taken around the code where we grab the queue, call group_log_xid() on the queue, and call commit_ordered() on each element of the queue, to make sure they happen serialised and in consistent order. It also protects the variable group_commit_queue_busy, which is used when not using group_log_xid() to delay running over a new queue until the first queue is completely done. 1.2.3 Global LOCK_commit_ordered This lock is taken around calls to commit_ordered(), to ensure they happen serialised. 1.2.4 Per-thread thd->LOCK_commit_ordered and thd->COND_commit_ordered This lock protects the thd->group_commit_ready variable, as well as the condition variable used to wake up threads after log_xid() and commit_ordered() finishes. 1.2.5 Global LOCK_group_commit_queue This is only used on platforms with no native compare-and-set operations, to make the queue operations atomic. 1.3 Commit algorithm. This is the basic algorithm, simplified by - omitting some error handling - omitting looping over all handlers when invoking handler methods - omitting some possible optimisations when not all calls needed (see next section). - Omitting the case where no group_log_xid() is used, see below. ---- BEGIN ALGORITHM ---- ht->prepare() // Call prepare_ordered() and enqueue in correct commit order lock(LOCK_prepare_ordered) ht->prepare_ordered() old_queue= enqueue_atomic(thd) thd->group_commit_ready= FALSE is_group_commit_leader= (old_queue == NULL) unlock(LOCK_prepare_ordered) if (is_group_commit_leader) // The first in queue handles group commit for everyone lock(LOCK_group_commit) // Wait while queue is busy, see below for when this occurs while (group_commit_queue_busy) cond_wait(COND_group_commit) // Grab and reverse the queue to get correct order of transactions queue= atomic_grab_reverse_queue() // This call will set individual error codes in thd->xid_error // It also sets the cookie for unlog() in thd->xid_cookie group_log_xid(queue) lock(LOCK_commit_ordered) for (other IN queue) if (!other->xid_error) ht->commit_ordered() unlock(LOCK_commit_ordered) unlock(LOCK_group_commit) // Now we are done, so wake up all the others. for (other IN TAIL(queue)) lock(other->LOCK_commit_ordered) other->group_commit_ready= TRUE cond_signal(other->COND_commit_ordered) unlock(other->LOCK_commit_ordered) else // If not the leader, just wait until leader did the work for us. lock(thd->LOCK_commit_ordered) while (!thd->group_commit_ready) cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) unlock(other->LOCK_commit_ordered) // Finally do any error reporting now that we're back in own thread. if (thd->xid_error) xid_delayed_error(thd) else ht->commit(thd) unlog(thd->xid_cookie, thd->xid) ---- END ALGORITHM ---- If the transaction coordinator does not support group_log_xid(), we have to do things differently. In this case after the serialisation point at prepare_ordered(), we have to parallelise again when running log_xid() (otherwise we would loose group commit). But then when log_xid() is done, we have to serialise again to check for any error and call commit_ordered() in correct sequence for any transaction where log_xid() did not return error. The central part of the algorithm in this case (when using log_xid()) is: ---- BEGIN ALGORITHM ---- cookie= log_xid(thd) error= (cookie == 0) if (is_group_commit_leader) // The first to enqueue grabs the queue and runs first. // But we must wait until a previous queue run is fully done. lock(LOCK_group_commit) while (group_commit_queue_busy) cond_wait(COND_group_commit) queue= atomic_grab_reverse_queue() // The queue will be busy until last thread in it is done. group_commit_queue_busy= TRUE unlock(LOCK_group_commit) else // Not first in queue -> wait for previous one to wake us up. lock(thd->LOCK_commit_ordered) while (!thd->group_commit_ready) cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) unlock(other->LOCK_commit_ordered) if (!error) // Only if log_xid() was successful lock(LOCK_commit_ordered) ht->commit_ordered() unlock(LOCK_commit_ordered) // Wake up the next thread, and release queue in last. next= thd->next_commit_ordered if (next) lock(next->LOCK_commit_ordered) next->group_commit_ready= TRUE cond_signal(next->COND_commit_ordered) unlock(next->LOCK_commit_ordered) else lock(LOCK_group_commit) group_commit_queue_busy= FALSE unlock(LOCK_group_commit) ---- END ALGORITHM ---- There are a number of locks taken in the algorithm, but in the group_log_xid() case most of them should be uncontended most of the time. The LOCK_group_commit of course will be contended, as new threads queue up waiting for the previous group commit (and binlog fsync()) to finish so they can do the next group commit. This is the whole point of implementing group commit. The LOCK_prepare_ordered and LOCK_commit_ordered mutexes should be not much contended as long as handlers follow the intension of having the corresponding handler calls execute quickly. The per-thread LOCK_commit_ordered mutexes should not be contended; they are only used to wake up a sleeping thread. 1.4 Optimisations when not using all three new calls The prepare_ordered(), group_log_xid(), and commit_ordered() methods are optional, and if not implemented by a particular handler/transaction coordinator, we can optimise the algorithm to take advantage of not having to keep ordering for the missing parts. If there is no prepare_ordered(), then we need not take the LOCK_prepare_ordered mutex. If there is no commit_ordered(), then we need not take the LOCK_commit_ordered mutex. If there is no group_log_xid(), then we only need the queue to ensure same ordering of transactions for commit_ordered() as for prepare_ordered(). Thus, if either of these (or both) are also not present, we do not need to use the queue at all. 2. Binlog code changes (log.cc) The bulk of the work needed for the binary log is to extend the code to allow group commit to the log. Unlike InnoDB/XtraDB, there is no existing support inside the binlog code for group commit. The existing code runs most of the write + fsync to the binary lock under the global LOCK_log mutex, preventing any group commit. To enable group commit, this code must be split into two parts: - one part that runs per transaction, re-writing the embedded event positions for the correct offset, and writing this into the in-memory log cache. - another part that writes a set of transactions to the disk, and runs fsync(). Then in group_log_xid(), we can run the first part in a loop over all the transactions in the passed-in queue, and run the second part only once. The binlog code also has other code paths that write into the binlog, eg. non-transactional statements. These have to be adapted also to work with the new code. In order to get some group commit facility for these also, we change that part of the code in a similar way to ha_commit_trans. We keep another, binlog-internal queue of such non-transactional binlog writes, and such writes queue up here before sleeping on the LOCK_log mutex. Once a thread obtains the LOCK_log, it loops over the queue for the fast part, and does the slow part once, then finally wakes up the others in the queue. In the transactional case in group_log_xid(), before we run the passed-in queue, we add any members found in the binlog-internal queue. This allows these non-transactional writes to share the group commit. However, in the case where it is a non-transactional write that gets the LOCK_log, the transactional transactions from the ha_commit_trans() queue will not be able to take part (they will have to wait for their turn to do another fsync). It seems difficult to cleanly let the binlog code grab the queue from out of the ha_commit_trans() algorithm. I think the group commit is mostly useful in transactional workloads anyway (non-transactional engines will loose data anyway in case of crash, so why fsync() after each transaction?) 3. XtraDB changes (ha_innodb.cc) The changes needed in XtraDB are comparatively simple, as XtraDB already implements group commit, it just needs to be enabled with the new commit_ordered() call. The existing commit() method already is logically in two parts. The first part runs under the prepare_commit_mutex() and must be run in same order as binlog commit. This part needs to be moved to commit_ordered(). The second part runs after releasing prepare_commit_mutex and does transaction log write+fsync; it can remain. Then the prepare_commit_mutex is removed (and the enable_unsafe_group_commit XtraDB option to disable it). There are two asserts that check that the thread running the first part of XtraDB commit is the same as the thread running the other operations for the transaction. These have to be removed (as commit_ordered() can run in a different thread). Also an error reporting with sql_print_error() has to be delayed until commit() time. 4. Proof-of-concept implementation There is a proof-of-concept implementation of this architecture, in the form of a quilt patch series [3]. A quick benchmark was done, with sync_binlog=1 and innodb_flush_log_at_trx_commit=1. 64 parallel threads doing single-row transactions against one table. Without the patch, we get only 25 queries per second. With the patch, we get 650 queries per second. 5. Open issues/tasks 5.1 XA / other prepare() and commit() call sites. Check that user-level XA is handled correctly and working. And covered sufficiently with tests. Also check that any other calls of ha->prepare() and ha->commit() outside of ha_commit_trans() are handled correctly. 5.2 Testing This worklog needs additions to the test suite, including error inserts to check error handling, and synchronisation points to check thread parallelism correctness. 6. Alternative implementations - The binlog code maintains its own extra atomic transaction queue to handle non-transactional commits in a good way together with transactional (with respect to group commit). Alternatively, we could ignore this issue and just give up on group commit for non-transactional statements, for some code simplifications. - The binlog code has two ways to prepare end_event and similar, one that uses stack-allocation, and another for when stack allocation is not possible that uses thd->mem_root. Probably the overhead of thd->mem_root is so small that it would make sense to use the same code for both cases. - Instead of adding extra fields to THD, we could allocate a separate structure on the thd->mem_root() with the required extra fields (including the THD pointer). Would seem to require initialising mutexes at every commit though. - It would probably be a good idea to implement TC_LOG_MMAP::group_log_xid() (should not be hard). ----------------------------------------------------------------------- References: [2] https://secure.wikimedia.org/wikipedia/en/wiki/ABA_problem [3] https://knielsen-hq.org/maria/patches.mwl116/ ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Progress (by Knielsen): Efficient group commit for binary log (116)
by worklog-noreply＠askmonty.org 07 Jun '10

07 Jun '10

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Efficient group commit for binary log CREATION DATE..: Mon, 26 Apr 2010, 13:28 SUPERVISOR.....: Knielsen IMPLEMENTOR....: Knielsen COPIES TO......: Serg CATEGORY.......: Server-RawIdeaBin TASK ID........: 116 (http://askmonty.org/worklog/?tid=116) VERSION........: Server-9.x STATUS.........: Assigned PRIORITY.......: 60 WORKED HOURS...: 71 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Knielsen - Mon, 07 Jun 2010, 07:15)=-=- Some more benchmarking. Blog about results and architecture. Fix two bugs in the proof-of-concept patch, races that causes hangs in benchmarks. Worked 11 hours and estimate 0 hours remain (original estimate increased by 11 hours). -=-=(Guest - Tue, 01 Jun 2010, 14:20)=-=- Status updated. --- /tmp/wklog.116.old.32652 2010-06-01 14:20:15.000000000 +0000 +++ /tmp/wklog.116.new.32652 2010-06-01 14:20:15.000000000 +0000 @@ -1 +1 @@ -Un-Assigned +Assigned -=-=(Knielsen - Mon, 31 May 2010, 06:48)=-=- Finish first architecture draft (changed my mind a number of times before I was satisfied). Write up architecture in worklog. Fix remaining test failures in proof-of-concept patch + implement xtradb part. Run some benchmarks on proof-of-concept implementation. Worked 11 hours and estimate 0 hours remain (original estimate increased by 11 hours). -=-=(Knielsen - Tue, 25 May 2010, 13:19)=-=- Low Level Design modified. --- /tmp/wklog.116.old.14255 2010-05-25 13:19:00.000000000 +0000 +++ /tmp/wklog.116.new.14255 2010-05-25 13:19:00.000000000 +0000 @@ -1 +1,363 @@ +1. Changes for ha_commit_trans() + +The gut of the code for commit is in the function ha_commit_trans() (and in +commit_one_phase() which is called from it). This must be extended to use the +new prepare_ordered(), group_log_xid(), and commit_ordered() calls. + +1.1 Atomic queue of committing transactions + +To keep the right commit order among participants, we put transactions into a +queue. The operations on the queue are non-locking: + + - Insert THD at the head of the queue, and return old queue. + + THD *enqueue_atomic(THD *thd) + + - Fetch (and delete) the whole queue. + + THD *atomic_grab_reverse_queue() + +These are simple to implement with atomic compare-and-set. Note that there is +no ABA problem [2], as we do not delete individual elements from the queue, we +grab the whole queue and replace it with NULL. + +A transaction enters the queue when it does prepare_ordered(). This way, the +scheduling order for prepare_ordered() calls is what determines the sequence +in the queue and effectively the commit order. + +The queue is grabbed by the code doing group_log_xid() and commit_ordered() +calls. The queue is passed directly to group_log_xid(), and afterwards +iterated to do individual commit_ordered() calls. + +Using a lock-free queue allows prepare_ordered() (for one transaction) to run +in parallel with commit_ordered (in another transaction), increasing potential +parallelism. + +The queue is simply a linked list of THD objects, linked through a +THD::next_commit_ordered field. Since we add at the head of the queue, the +list is actually in reverse order, so must be reversed when we grab and delete +it. + +The reason that enqueue_atomic() returns the old queue is so that we can check +if an insert goes to the head of the queue. The thread at the head of the +queue will do the sequential part of group commit for everyone. + + +1.2 Locks + +1.2.1 Global LOCK_prepare_ordered + +This lock is taken to serialise calls to prepare_ordered(). Note that +effectively, the commit order is decided by the order in which threads obtain +this lock. + + +1.2.2 Global LOCK_group_commit and COND_group_commit + +This lock is used to protect the serial part of group commit. It is taken +around the code where we grab the queue, call group_log_xid() on the queue, +and call commit_ordered() on each element of the queue, to make sure they +happen serialised and in consistent order. It also protects the variable +group_commit_queue_busy, which is used when not using group_log_xid() to delay +running over a new queue until the first queue is completely done. + + +1.2.3 Global LOCK_commit_ordered + +This lock is taken around calls to commit_ordered(), to ensure they happen +serialised. + + +1.2.4 Per-thread thd->LOCK_commit_ordered and thd->COND_commit_ordered + +This lock protects the thd->group_commit_ready variable, as well as the +condition variable used to wake up threads after log_xid() and +commit_ordered() finishes. + + +1.2.5 Global LOCK_group_commit_queue + +This is only used on platforms with no native compare-and-set operations, to +make the queue operations atomic. + + +1.3 Commit algorithm. + +This is the basic algorithm, simplified by + + - omitting some error handling + + - omitting looping over all handlers when invoking handler methods + + - omitting some possible optimisations when not all calls needed (see next + section). + + - Omitting the case where no group_log_xid() is used, see below. + +---- BEGIN ALGORITHM ---- + ht->prepare() + + // Call prepare_ordered() and enqueue in correct commit order + lock(LOCK_prepare_ordered) + ht->prepare_ordered() + old_queue= enqueue_atomic(thd) + thd->group_commit_ready= FALSE + is_group_commit_leader= (old_queue == NULL) + unlock(LOCK_prepare_ordered) + + if (is_group_commit_leader) + + // The first in queue handles group commit for everyone + + lock(LOCK_group_commit) + // Wait while queue is busy, see below for when this occurs + while (group_commit_queue_busy) + cond_wait(COND_group_commit) + + // Grab and reverse the queue to get correct order of transactions + queue= atomic_grab_reverse_queue() + + // This call will set individual error codes in thd->xid_error + // It also sets the cookie for unlog() in thd->xid_cookie + group_log_xid(queue) + + lock(LOCK_commit_ordered) + for (other IN queue) + if (!other->xid_error) + ht->commit_ordered() + unlock(LOCK_commit_ordered) + + unlock(LOCK_group_commit) + + // Now we are done, so wake up all the others. + for (other IN TAIL(queue)) + lock(other->LOCK_commit_ordered) + other->group_commit_ready= TRUE + cond_signal(other->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + else + // If not the leader, just wait until leader did the work for us. + lock(thd->LOCK_commit_ordered) + while (!thd->group_commit_ready) + cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + + // Finally do any error reporting now that we're back in own thread. + if (thd->xid_error) + xid_delayed_error(thd) + else + ht->commit(thd) + unlog(thd->xid_cookie, thd->xid) +---- END ALGORITHM ---- + +If the transaction coordinator does not support group_log_xid(), we have to do +things differently. In this case after the serialisation point at +prepare_ordered(), we have to parallelise again when running log_xid() +(otherwise we would loose group commit). But then when log_xid() is done, we +have to serialise again to check for any error and call commit_ordered() in +correct sequence for any transaction where log_xid() did not return error. + +The central part of the algorithm in this case (when using log_xid()) is: + +---- BEGIN ALGORITHM ---- + cookie= log_xid(thd) + error= (cookie == 0) + + if (is_group_commit_leader) + + // The first to enqueue grabs the queue and runs first. + // But we must wait until a previous queue run is fully done. + + lock(LOCK_group_commit) + while (group_commit_queue_busy) + cond_wait(COND_group_commit) + queue= atomic_grab_reverse_queue() + // The queue will be busy until last thread in it is done. + group_commit_queue_busy= TRUE + unlock(LOCK_group_commit) + else + // Not first in queue -> wait for previous one to wake us up. + lock(thd->LOCK_commit_ordered) + while (!thd->group_commit_ready) + cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) + unlock(other->LOCK_commit_ordered) + + if (!error) // Only if log_xid() was successful + lock(LOCK_commit_ordered) + ht->commit_ordered() + unlock(LOCK_commit_ordered) + + // Wake up the next thread, and release queue in last. + next= thd->next_commit_ordered + + if (next) + lock(next->LOCK_commit_ordered) + next->group_commit_ready= TRUE + cond_signal(next->COND_commit_ordered) + unlock(next->LOCK_commit_ordered) + else + lock(LOCK_group_commit) + group_commit_queue_busy= FALSE + unlock(LOCK_group_commit) +---- END ALGORITHM ---- + +There are a number of locks taken in the algorithm, but in the group_log_xid() +case most of them should be uncontended most of the time. The +LOCK_group_commit of course will be contended, as new threads queue up waiting +for the previous group commit (and binlog fsync()) to finish so they can do +the next group commit. This is the whole point of implementing group commit. + +The LOCK_prepare_ordered and LOCK_commit_ordered mutexes should be not much +contended as long as handlers follow the intension of having the corresponding +handler calls execute quickly. + +The per-thread LOCK_commit_ordered mutexes should not be contended; they are +only used to wake up a sleeping thread. + + +1.4 Optimisations when not using all three new calls + + +The prepare_ordered(), group_log_xid(), and commit_ordered() methods are +optional, and if not implemented by a particular handler/transaction +coordinator, we can optimise the algorithm to take advantage of not having to +keep ordering for the missing parts. + +If there is no prepare_ordered(), then we need not take the +LOCK_prepare_ordered mutex. + +If there is no commit_ordered(), then we need not take the LOCK_commit_ordered +mutex. + +If there is no group_log_xid(), then we only need the queue to ensure same +ordering of transactions for commit_ordered() as for prepare_ordered(). Thus, +if either of these (or both) are also not present, we do not need to use the +queue at all. + + +2. Binlog code changes (log.cc) + + +The bulk of the work needed for the binary log is to extend the code to allow +group commit to the log. Unlike InnoDB/XtraDB, there is no existing support +inside the binlog code for group commit. + +The existing code runs most of the write + fsync to the binary lock under the +global LOCK_log mutex, preventing any group commit. + +To enable group commit, this code must be split into two parts: + + - one part that runs per transaction, re-writing the embedded event positions + for the correct offset, and writing this into the in-memory log cache. + + - another part that writes a set of transactions to the disk, and runs + fsync(). + +Then in group_log_xid(), we can run the first part in a loop over all the +transactions in the passed-in queue, and run the second part only once. + +The binlog code also has other code paths that write into the binlog, +eg. non-transactional statements. These have to be adapted also to work with +the new code. + +In order to get some group commit facility for these also, we change that part +of the code in a similar way to ha_commit_trans. We keep another, +binlog-internal queue of such non-transactional binlog writes, and such writes +queue up here before sleeping on the LOCK_log mutex. Once a thread obtains the +LOCK_log, it loops over the queue for the fast part, and does the slow part +once, then finally wakes up the others in the queue. + +In the transactional case in group_log_xid(), before we run the passed-in +queue, we add any members found in the binlog-internal queue. This allows +these non-transactional writes to share the group commit. + +However, in the case where it is a non-transactional write that gets the +LOCK_log, the transactional transactions from the ha_commit_trans() queue will +not be able to take part (they will have to wait for their turn to do another +fsync). It seems difficult to cleanly let the binlog code grab the queue from +out of the ha_commit_trans() algorithm. I think the group commit is mostly +useful in transactional workloads anyway (non-transactional engines will loose +data anyway in case of crash, so why fsync() after each transaction?) + + +3. XtraDB changes (ha_innodb.cc) + +The changes needed in XtraDB are comparatively simple, as XtraDB already +implements group commit, it just needs to be enabled with the new +commit_ordered() call. + +The existing commit() method already is logically in two parts. The first part +runs under the prepare_commit_mutex() and must be run in same order as binlog +commit. This part needs to be moved to commit_ordered(). The second part runs +after releasing prepare_commit_mutex and does transaction log write+fsync; it +can remain. + +Then the prepare_commit_mutex is removed (and the enable_unsafe_group_commit +XtraDB option to disable it). + +There are two asserts that check that the thread running the first part of +XtraDB commit is the same as the thread running the other operations for the +transaction. These have to be removed (as commit_ordered() can run in a +different thread). Also an error reporting with sql_print_error() has to be +delayed until commit() time. + + +4. Proof-of-concept implementation + +There is a proof-of-concept implementation of this architecture, in the form +of a quilt patch series [3]. + +A quick benchmark was done, with sync_binlog=1 and +innodb_flush_log_at_trx_commit=1. 64 parallel threads doing single-row +transactions against one table. + +Without the patch, we get only 25 queries per second. + +With the patch, we get 650 queries per second. + + +5. Open issues/tasks + +5.1 XA / other prepare() and commit() call sites. + +Check that user-level XA is handled correctly and working. And covered +sufficiently with tests. Also check that any other calls of ha->prepare() and +ha->commit() outside of ha_commit_trans() are handled correctly. + +5.2 Testing + +This worklog needs additions to the test suite, including error inserts to +check error handling, and synchronisation points to check thread parallelism +correctness. + + +6. Alternative implementations + + - The binlog code maintains its own extra atomic transaction queue to handle + non-transactional commits in a good way together with transactional (with + respect to group commit). Alternatively, we could ignore this issue and + just give up on group commit for non-transactional statements, for some + code simplifications. + + - The binlog code has two ways to prepare end_event and similar, one that + uses stack-allocation, and another for when stack allocation is not + possible that uses thd->mem_root. Probably the overhead of thd->mem_root is + so small that it would make sense to use the same code for both cases. + + - Instead of adding extra fields to THD, we could allocate a separate + structure on the thd->mem_root() with the required extra fields (including + the THD pointer). Would seem to require initialising mutexes at every + commit though. + + - It would probably be a good idea to implement TC_LOG_MMAP::group_log_xid() + (should not be hard). + + +----------------------------------------------------------------------- + +References: + +[2] https://secure.wikimedia.org/wikipedia/en/wiki/ABA_problem + +[3] https://knielsen-hq.org/maria/patches.mwl116/ -=-=(Knielsen - Tue, 25 May 2010, 13:18)=-=- High-Level Specification modified. --- /tmp/wklog.116.old.14249 2010-05-25 13:18:34.000000000 +0000 +++ /tmp/wklog.116.new.14249 2010-05-25 13:18:34.000000000 +0000 @@ -1 +1,157 @@ +The basic idea in group commit is that multiple threads, each handling one +transaction, prepare for commit and then queue up together waiting to do an +fsync() on the transaction log. Then once the log is available, a single +thread does the fsync() + other necessary book-keeping for all of the threads +at once. After this, the single thread signals the other threads that it's +done and they can finish up and return success (or failure) from the commit +operation. + +So group commit has a parallel part, and a sequential part. So we need a +facility for engines/binlog to participate in both the parallel and the +sequential part. + +To do this, we add two new handlerton methods: + + int (*prepare_ordered)(handlerton *hton, THD *thd, bool all); + void (*commit_ordered)(handlerton *hton, THD *thd, bool all); + +The idea is that the existing prepare() and commit() methods run in the +parallel part of group commit, and the new prepare_ordered() and +commit_ordered() run in the sequential part. + +The prepare_ordered() method is called after prepare(). The order of +tranctions that call into prepare_ordered() is guaranteed to be the same among +all storage engines and binlog, and it is serialised so no two calls can be +running inside the same engine at the same time. + +The commit_ordered() method is called before commit(), and similarly is +guaranteed to have same transaction order in all participants, and to be +serialised within one engine. + +As the prepare_ordered() and commit_ordered() calls are serialised, the idea +is that handlers should do the minimum amount of work needed in these calls, +relaying most of the work (eg. fsync() ...) to prepare() and commit(). + +As a concrete example, for InnoDB the commit_ordered() method will do the +first part of commit that fixed the commit order in the transaction log +buffer, and the commit() method will write the log to disk and fsync() +it. This split already exists inside the InnoDB code, running before +respectively after releasing the prepare_commit_mutex. + +In addition, the XA transaction coordinator (TC_LOG) is special, since it is +the one responsible for deciding whether to commit or rollback the +transaction. For this we need an extra method, since this decision can be done +only after we know that all prepare() and prepare_ordered() calls succeed, and +must be done to know whether to call commit_ordered()/commit(), or do rollback. + +The existing method for this is TC_LOG::log_xid(). To make implementing group +commit simpler to implement in a transaction coordinator and more efficient, +we introduce a new method: + + void group_log_xid(THD *first_thd); + +This method runs in the sequential part of group commit. It receives a list of +transactions to perform log_xid() on, in the correct commit order. (Note that +TC_LOG can do parallel parts of group commit in its own prepare() and commit() +methods). + +This method can make it easier to implement the group commit in TC_LOG, as it +gets directly the list of transactions in the right order. Without it, it +might need to compute such order anyway in a prepare_ordered() method, and the +server has to create this ordered list anyway to implement the order guarantee +for prepare_ordered() and commit_ordered(). + +This group_log_xid() method also is more efficient, as it avoids some +inter-thread synchronisation. Since group_log_xid() is serialised, we can run +it together with all the commit_ordered() method calls and need only a single +sequential code section. With the log_xid() methods, we would need first a +sequential part for the prepare_ordered() calls, then a parallel part with +log_xid() calls (to not loose group commit ability for log_xid()), then again +a sequential part for the commit_ordered() method calls. + +The extra synchronisation is needed, as each commit_ordered() call will have +to wait for log_xid() in one thread (if log_xid() fails then commit_ordered() +should not be called), and also wait for commit_ordered() to finish in all +threads handling earlier commits. In effect we will need to bounce the +execution from one thread to the other among all participants in the group +commit. + +As a consequence of the group_log_xid() optimisation, handlers must be aware +that the commit_ordered() call can happen in another thread than the one +running commit() (so thread local storage is not available). This should not +be a big issue as the THD is available for storing any needed information. + +Since group_log_xid() runs for multiple transactions in a single thread, it +can not do error reporting (my_error()) as that relies on thread local +storage. Instead it sets an error code in THD::xid_error, and if there is an +error then later another method will be called (in correct thread context) to +actually report the error: + + int xid_delayed_error(THD *thd) + +The three new methods prepare_ordered(), group_log_xid(), and commit_ordered() +are optional (as is xid_delayed_error). A storage engine or transaction +coordinator is free to not implement them if they are not needed. In this case +there will be no order guarantee for the corresponding stage of group commit +for that engine. For example, InnoDB needs no ordering of the prepare phase, +so can omit implementing prepare_ordered(); TC_LOG_MMAP needs no ordering at +all, so does not need to implement any of them. + +Note in particular that all existing engines (/binlog implementations if they +exist) will work unmodified (and also without any change in group commit +facilities or commit order guaranteed). + +Using these new APIs, the work will be to + + - In ha_commit_trans(), implement the correct semantics for the three new + calls. + + - In XtraDB, use the new commit_ordered() call to remove the + prepare_commit_mutex (and resurrect group commit) without loosing the + consistency with binlog commit order. + + - In log.cc (binlog module), implement group_log_xid() to do group commit of + multiple transactions to the binlog with a single shared fsync() call. + +----------------------------------------------------------------------- +Some possible alternative for this worklog: + + - We could eliminate the group_log_xid() method for a simpler API, at the + cost of extra synchronisation between threads to do in-order + commit_ordered() method calls. This would also allow to call + commit_ordered() in the correct thread context. + + - Alternatively, we could eliminate log_xid() and require that all + transaction coordinators implement group_log_xid() instead, again for some + moderate simplification. + + - At the moment there is no plugin actually using prepare_ordered(), so, it + could be removed from the design. But it fits in well, is efficient to + implement, and could be useful later (eg. for the requested feature of + releasing locks early in InnoDB). + +----------------------------------------------------------------------- +Some possible follow-up projects after this is implemented: + + - Add statistics about how efficient group commit is (#fsyncs/#commits in + each engine and binlog). + + - Implement an XtraDB prepare_ordered() methods that can release row locks + early (Mark Callaghan from Facebook advocates this, but need to determine + exactly how to do this safely). + + - Implement a new crash recovery algorithm that uses the consistent commit + ordering to need only fsync() for the binlog. At crash recovery, any + missing transactions in an engine is replayed from the correct point in the + binlog (this point must be stored transactionally inside the engine, as + XtraDB already does today). + + - Implement that START TRANSACTION WITH CONSISTENT SNAPSHOT 1) really gets a + consistent snapshow, with same set of committed and not committed + transactions in all engines, 2) returns a corresponding consistent binlog + position. This should be easy by piggybacking on the synchronisation + implemented for ha_commit_trans(). + + - Use this in XtraBackup to get consistent binlog position without having to + block all updates with FLUSH TABLES WITH READ LOCK. -=-=(Knielsen - Tue, 25 May 2010, 13:18)=-=- High Level Description modified. --- /tmp/wklog.116.old.14234 2010-05-25 13:18:07.000000000 +0000 +++ /tmp/wklog.116.new.14234 2010-05-25 13:18:07.000000000 +0000 @@ -21,3 +21,69 @@ http://kristiannielsen.livejournal.com/12408.html http://kristiannielsen.livejournal.com/12553.html +---- + +Implementing group commit in MySQL faces some challenges from the handler +plugin architecture: + +1. Because storage engine handlers have separate transaction log from the +mysql binlog (and from each other), there are multiple fsync() calls per +commit that need the group commit optimisation (2 per participating storage +engine + 1 for binlog). + +2. The code handling commit is split in several places, in main server code +and in storage engine code. With pluggable binlog it will be split even +more. This requires a good abstract yet powerful API to be able to implement +group commit simply and efficiently in plugins without the different parts +having to rely on iternals of the others. + +3. We want the order of commits to be the same in all engines participating in +multiple transactions. This requirement is the reason that InnoDB currently +breaks group commit with the infamous prepare_commit_mutex. + +While currently there is no server guarantee to get same commit order in +engines an binlog (except for the InnoDB prepare_commit_mutex hack), there are +several reasons why this could be desirable: + + - InnoDB hot backup needs to be able to extract a binlog position that is + consistent with the hot backup to be able to provision a new slave, and + this is impossible without imposing at least partial consistent ordering + between InnoDB and binlog. + + - Other backup methods could have similar needs, eg. XtraBackup or + `mysqldump --single-transaction`, to have consistent commit order between + binlog and storage engines without having to do FLUSH TABLES WITH READ LOCK + or similar expensive blocking operation. (other backup methods, like LVM + snapshot, don't need consistent commit order, as they can restore + out-of-order commits during crash recovery using XA). + + - If we have consistent commit order, we can think about optimising commit to + need only one fsync (for binlog); lost commits in storage engines can then + be recovered from the binlog at crash recovery by re-playing against the + engine from a particular point in the binlog. + + - With consistent commit order, we can get better semantics for START + TRANSACTION WITH CONSISTENT SNAPSHOT with multi-engine transactions (and we + could even get it to return also a matching binlog position). Currently, + this "CONSISTENT SNAPSHOT" can be inconsistent among multiple storage + engines. + + - In InnoDB, the performance in the presense of hotspots can be improved if + we can release row locks early in the commit phase, but this requires that we +release them in + the same order as commits in the binlog to ensure consistency between + master and slaves. + + - There was some discussions around Galera [1] synchroneous replication and + global transaction ID that it needed consistent commit order among + participating engines. + + - I believe there could be other applications for guaranteed consistent + commit order, and that the architecture described in this worklog can + implement such guarantee with reasonable overhead. + + +References: + +[1] Galera: http://www.codership.com/products/galera_replication + -=-=(Knielsen - Tue, 25 May 2010, 08:28)=-=- More thoughts on and changes to the archtecture. Got to something now that I am satisfied with and that seems to be able to handle all issues. Implement new prepare_ordered and commit_ordered handler methods and the logic in ha_commit_trans(). Implement TC_LOG::group_log_xid() method and logic in ha_commit_trans(). Implement XtraDB part, using commit_ordered() rather than prepare_commit_mutex. Fix test suite failures. Proof-of-concept patch series complete now. Do initial benchmark, getting good results. With 64 threads, see 26x improvement in queries-per-sec. Next step: write up the architecture description. Worked 21 hours and estimate 0 hours remain (original estimate increased by 21 hours). -=-=(Knielsen - Wed, 12 May 2010, 06:41)=-=- Started work on a Quilt patch series, refactoring the binlog code to prepare for implementing the group commit, and working on the design of group commit in parallel. Found and fixed several problems in error handling when writing to binlog. Removed redundant table map version locking. Split binlog writing into two parts in preparations for group commit. When ready to write to the binlog, threads enter a queue, and the first thread in the queue handles the binlog writing for everyone. When it obtains the LOCK_log, it first loops over all threads, executing the first part of binlog writing (the write(2) syscall essentially). It then runs the second part (fsync(2) essentially) only once, and then wakes up the remaining threads in the queue. Still to be done: Finish the proof-of-concept group commit patch, by 1) implementing the prepare_fast() and commit_fast() callbacks in handler.cc 2) move the binlog thread enqueue from log_xid() to binlog_prepare_fast(), 3) move fast part of InnoDB commit to innobase_commit_fast(), removing the prepare_commit_mutex(). Write up the final design in this worklog. Evaluate the design to see if we can do better/different. Think about possible next steps, such as releasing innodb row locks early (in innobase_prepare_fast), and doing crash recovery by replaying transactions from the binlog (removing the need for engine durability and 2 of 3 fsync() in commit). Worked 28 hours and estimate 0 hours remain (original estimate increased by 28 hours). -=-=(Serg - Mon, 26 Apr 2010, 14:10)=-=- Observers changed: Serg DESCRIPTION: Currently, in order to ensure that the server can recover after a crash to a state in which storage engines and binary log are consistent with each other, it is necessary to use XA with durable commits for both storage engines (innodb_flush_log_at_trx_commit=1) and binary log (sync_binlog=1). This is _very_ expensive, since the server needs to do three fsync() operations for every commit, as there is no working group commit when the binary log is enabled. The idea is to - Implement/fix group commit to work properly with the binary log enabled. - (Optionally) avoid the need to fsync() in the engine, and instead rely on replaying any lost transactions from the binary log against the engine during crash recovery. For background see these articles: http://kristiannielsen.livejournal.com/12254.html http://kristiannielsen.livejournal.com/12408.html http://kristiannielsen.livejournal.com/12553.html ---- Implementing group commit in MySQL faces some challenges from the handler plugin architecture: 1. Because storage engine handlers have separate transaction log from the mysql binlog (and from each other), there are multiple fsync() calls per commit that need the group commit optimisation (2 per participating storage engine + 1 for binlog). 2. The code handling commit is split in several places, in main server code and in storage engine code. With pluggable binlog it will be split even more. This requires a good abstract yet powerful API to be able to implement group commit simply and efficiently in plugins without the different parts having to rely on iternals of the others. 3. We want the order of commits to be the same in all engines participating in multiple transactions. This requirement is the reason that InnoDB currently breaks group commit with the infamous prepare_commit_mutex. While currently there is no server guarantee to get same commit order in engines an binlog (except for the InnoDB prepare_commit_mutex hack), there are several reasons why this could be desirable: - InnoDB hot backup needs to be able to extract a binlog position that is consistent with the hot backup to be able to provision a new slave, and this is impossible without imposing at least partial consistent ordering between InnoDB and binlog. - Other backup methods could have similar needs, eg. XtraBackup or `mysqldump --single-transaction`, to have consistent commit order between binlog and storage engines without having to do FLUSH TABLES WITH READ LOCK or similar expensive blocking operation. (other backup methods, like LVM snapshot, don't need consistent commit order, as they can restore out-of-order commits during crash recovery using XA). - If we have consistent commit order, we can think about optimising commit to need only one fsync (for binlog); lost commits in storage engines can then be recovered from the binlog at crash recovery by re-playing against the engine from a particular point in the binlog. - With consistent commit order, we can get better semantics for START TRANSACTION WITH CONSISTENT SNAPSHOT with multi-engine transactions (and we could even get it to return also a matching binlog position). Currently, this "CONSISTENT SNAPSHOT" can be inconsistent among multiple storage engines. - In InnoDB, the performance in the presense of hotspots can be improved if we can release row locks early in the commit phase, but this requires that we release them in the same order as commits in the binlog to ensure consistency between master and slaves. - There was some discussions around Galera [1] synchroneous replication and global transaction ID that it needed consistent commit order among participating engines. - I believe there could be other applications for guaranteed consistent commit order, and that the architecture described in this worklog can implement such guarantee with reasonable overhead. References: [1] Galera: http://www.codership.com/products/galera_replication HIGH-LEVEL SPECIFICATION: The basic idea in group commit is that multiple threads, each handling one transaction, prepare for commit and then queue up together waiting to do an fsync() on the transaction log. Then once the log is available, a single thread does the fsync() + other necessary book-keeping for all of the threads at once. After this, the single thread signals the other threads that it's done and they can finish up and return success (or failure) from the commit operation. So group commit has a parallel part, and a sequential part. So we need a facility for engines/binlog to participate in both the parallel and the sequential part. To do this, we add two new handlerton methods: int (*prepare_ordered)(handlerton *hton, THD *thd, bool all); void (*commit_ordered)(handlerton *hton, THD *thd, bool all); The idea is that the existing prepare() and commit() methods run in the parallel part of group commit, and the new prepare_ordered() and commit_ordered() run in the sequential part. The prepare_ordered() method is called after prepare(). The order of tranctions that call into prepare_ordered() is guaranteed to be the same among all storage engines and binlog, and it is serialised so no two calls can be running inside the same engine at the same time. The commit_ordered() method is called before commit(), and similarly is guaranteed to have same transaction order in all participants, and to be serialised within one engine. As the prepare_ordered() and commit_ordered() calls are serialised, the idea is that handlers should do the minimum amount of work needed in these calls, relaying most of the work (eg. fsync() ...) to prepare() and commit(). As a concrete example, for InnoDB the commit_ordered() method will do the first part of commit that fixed the commit order in the transaction log buffer, and the commit() method will write the log to disk and fsync() it. This split already exists inside the InnoDB code, running before respectively after releasing the prepare_commit_mutex. In addition, the XA transaction coordinator (TC_LOG) is special, since it is the one responsible for deciding whether to commit or rollback the transaction. For this we need an extra method, since this decision can be done only after we know that all prepare() and prepare_ordered() calls succeed, and must be done to know whether to call commit_ordered()/commit(), or do rollback. The existing method for this is TC_LOG::log_xid(). To make implementing group commit simpler to implement in a transaction coordinator and more efficient, we introduce a new method: void group_log_xid(THD *first_thd); This method runs in the sequential part of group commit. It receives a list of transactions to perform log_xid() on, in the correct commit order. (Note that TC_LOG can do parallel parts of group commit in its own prepare() and commit() methods). This method can make it easier to implement the group commit in TC_LOG, as it gets directly the list of transactions in the right order. Without it, it might need to compute such order anyway in a prepare_ordered() method, and the server has to create this ordered list anyway to implement the order guarantee for prepare_ordered() and commit_ordered(). This group_log_xid() method also is more efficient, as it avoids some inter-thread synchronisation. Since group_log_xid() is serialised, we can run it together with all the commit_ordered() method calls and need only a single sequential code section. With the log_xid() methods, we would need first a sequential part for the prepare_ordered() calls, then a parallel part with log_xid() calls (to not loose group commit ability for log_xid()), then again a sequential part for the commit_ordered() method calls. The extra synchronisation is needed, as each commit_ordered() call will have to wait for log_xid() in one thread (if log_xid() fails then commit_ordered() should not be called), and also wait for commit_ordered() to finish in all threads handling earlier commits. In effect we will need to bounce the execution from one thread to the other among all participants in the group commit. As a consequence of the group_log_xid() optimisation, handlers must be aware that the commit_ordered() call can happen in another thread than the one running commit() (so thread local storage is not available). This should not be a big issue as the THD is available for storing any needed information. Since group_log_xid() runs for multiple transactions in a single thread, it can not do error reporting (my_error()) as that relies on thread local storage. Instead it sets an error code in THD::xid_error, and if there is an error then later another method will be called (in correct thread context) to actually report the error: int xid_delayed_error(THD *thd) The three new methods prepare_ordered(), group_log_xid(), and commit_ordered() are optional (as is xid_delayed_error). A storage engine or transaction coordinator is free to not implement them if they are not needed. In this case there will be no order guarantee for the corresponding stage of group commit for that engine. For example, InnoDB needs no ordering of the prepare phase, so can omit implementing prepare_ordered(); TC_LOG_MMAP needs no ordering at all, so does not need to implement any of them. Note in particular that all existing engines (/binlog implementations if they exist) will work unmodified (and also without any change in group commit facilities or commit order guaranteed). Using these new APIs, the work will be to - In ha_commit_trans(), implement the correct semantics for the three new calls. - In XtraDB, use the new commit_ordered() call to remove the prepare_commit_mutex (and resurrect group commit) without loosing the consistency with binlog commit order. - In log.cc (binlog module), implement group_log_xid() to do group commit of multiple transactions to the binlog with a single shared fsync() call. ----------------------------------------------------------------------- Some possible alternative for this worklog: - We could eliminate the group_log_xid() method for a simpler API, at the cost of extra synchronisation between threads to do in-order commit_ordered() method calls. This would also allow to call commit_ordered() in the correct thread context. - Alternatively, we could eliminate log_xid() and require that all transaction coordinators implement group_log_xid() instead, again for some moderate simplification. - At the moment there is no plugin actually using prepare_ordered(), so, it could be removed from the design. But it fits in well, is efficient to implement, and could be useful later (eg. for the requested feature of releasing locks early in InnoDB). ----------------------------------------------------------------------- Some possible follow-up projects after this is implemented: - Add statistics about how efficient group commit is (#fsyncs/#commits in each engine and binlog). - Implement an XtraDB prepare_ordered() methods that can release row locks early (Mark Callaghan from Facebook advocates this, but need to determine exactly how to do this safely). - Implement a new crash recovery algorithm that uses the consistent commit ordering to need only fsync() for the binlog. At crash recovery, any missing transactions in an engine is replayed from the correct point in the binlog (this point must be stored transactionally inside the engine, as XtraDB already does today). - Implement that START TRANSACTION WITH CONSISTENT SNAPSHOT 1) really gets a consistent snapshow, with same set of committed and not committed transactions in all engines, 2) returns a corresponding consistent binlog position. This should be easy by piggybacking on the synchronisation implemented for ha_commit_trans(). - Use this in XtraBackup to get consistent binlog position without having to block all updates with FLUSH TABLES WITH READ LOCK. LOW-LEVEL DESIGN: 1. Changes for ha_commit_trans() The gut of the code for commit is in the function ha_commit_trans() (and in commit_one_phase() which is called from it). This must be extended to use the new prepare_ordered(), group_log_xid(), and commit_ordered() calls. 1.1 Atomic queue of committing transactions To keep the right commit order among participants, we put transactions into a queue. The operations on the queue are non-locking: - Insert THD at the head of the queue, and return old queue. THD *enqueue_atomic(THD *thd) - Fetch (and delete) the whole queue. THD *atomic_grab_reverse_queue() These are simple to implement with atomic compare-and-set. Note that there is no ABA problem [2], as we do not delete individual elements from the queue, we grab the whole queue and replace it with NULL. A transaction enters the queue when it does prepare_ordered(). This way, the scheduling order for prepare_ordered() calls is what determines the sequence in the queue and effectively the commit order. The queue is grabbed by the code doing group_log_xid() and commit_ordered() calls. The queue is passed directly to group_log_xid(), and afterwards iterated to do individual commit_ordered() calls. Using a lock-free queue allows prepare_ordered() (for one transaction) to run in parallel with commit_ordered (in another transaction), increasing potential parallelism. The queue is simply a linked list of THD objects, linked through a THD::next_commit_ordered field. Since we add at the head of the queue, the list is actually in reverse order, so must be reversed when we grab and delete it. The reason that enqueue_atomic() returns the old queue is so that we can check if an insert goes to the head of the queue. The thread at the head of the queue will do the sequential part of group commit for everyone. 1.2 Locks 1.2.1 Global LOCK_prepare_ordered This lock is taken to serialise calls to prepare_ordered(). Note that effectively, the commit order is decided by the order in which threads obtain this lock. 1.2.2 Global LOCK_group_commit and COND_group_commit This lock is used to protect the serial part of group commit. It is taken around the code where we grab the queue, call group_log_xid() on the queue, and call commit_ordered() on each element of the queue, to make sure they happen serialised and in consistent order. It also protects the variable group_commit_queue_busy, which is used when not using group_log_xid() to delay running over a new queue until the first queue is completely done. 1.2.3 Global LOCK_commit_ordered This lock is taken around calls to commit_ordered(), to ensure they happen serialised. 1.2.4 Per-thread thd->LOCK_commit_ordered and thd->COND_commit_ordered This lock protects the thd->group_commit_ready variable, as well as the condition variable used to wake up threads after log_xid() and commit_ordered() finishes. 1.2.5 Global LOCK_group_commit_queue This is only used on platforms with no native compare-and-set operations, to make the queue operations atomic. 1.3 Commit algorithm. This is the basic algorithm, simplified by - omitting some error handling - omitting looping over all handlers when invoking handler methods - omitting some possible optimisations when not all calls needed (see next section). - Omitting the case where no group_log_xid() is used, see below. ---- BEGIN ALGORITHM ---- ht->prepare() // Call prepare_ordered() and enqueue in correct commit order lock(LOCK_prepare_ordered) ht->prepare_ordered() old_queue= enqueue_atomic(thd) thd->group_commit_ready= FALSE is_group_commit_leader= (old_queue == NULL) unlock(LOCK_prepare_ordered) if (is_group_commit_leader) // The first in queue handles group commit for everyone lock(LOCK_group_commit) // Wait while queue is busy, see below for when this occurs while (group_commit_queue_busy) cond_wait(COND_group_commit) // Grab and reverse the queue to get correct order of transactions queue= atomic_grab_reverse_queue() // This call will set individual error codes in thd->xid_error // It also sets the cookie for unlog() in thd->xid_cookie group_log_xid(queue) lock(LOCK_commit_ordered) for (other IN queue) if (!other->xid_error) ht->commit_ordered() unlock(LOCK_commit_ordered) unlock(LOCK_group_commit) // Now we are done, so wake up all the others. for (other IN TAIL(queue)) lock(other->LOCK_commit_ordered) other->group_commit_ready= TRUE cond_signal(other->COND_commit_ordered) unlock(other->LOCK_commit_ordered) else // If not the leader, just wait until leader did the work for us. lock(thd->LOCK_commit_ordered) while (!thd->group_commit_ready) cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) unlock(other->LOCK_commit_ordered) // Finally do any error reporting now that we're back in own thread. if (thd->xid_error) xid_delayed_error(thd) else ht->commit(thd) unlog(thd->xid_cookie, thd->xid) ---- END ALGORITHM ---- If the transaction coordinator does not support group_log_xid(), we have to do things differently. In this case after the serialisation point at prepare_ordered(), we have to parallelise again when running log_xid() (otherwise we would loose group commit). But then when log_xid() is done, we have to serialise again to check for any error and call commit_ordered() in correct sequence for any transaction where log_xid() did not return error. The central part of the algorithm in this case (when using log_xid()) is: ---- BEGIN ALGORITHM ---- cookie= log_xid(thd) error= (cookie == 0) if (is_group_commit_leader) // The first to enqueue grabs the queue and runs first. // But we must wait until a previous queue run is fully done. lock(LOCK_group_commit) while (group_commit_queue_busy) cond_wait(COND_group_commit) queue= atomic_grab_reverse_queue() // The queue will be busy until last thread in it is done. group_commit_queue_busy= TRUE unlock(LOCK_group_commit) else // Not first in queue -> wait for previous one to wake us up. lock(thd->LOCK_commit_ordered) while (!thd->group_commit_ready) cond_wait(thd->LOCK_commit_ordered, thd->COND_commit_ordered) unlock(other->LOCK_commit_ordered) if (!error) // Only if log_xid() was successful lock(LOCK_commit_ordered) ht->commit_ordered() unlock(LOCK_commit_ordered) // Wake up the next thread, and release queue in last. next= thd->next_commit_ordered if (next) lock(next->LOCK_commit_ordered) next->group_commit_ready= TRUE cond_signal(next->COND_commit_ordered) unlock(next->LOCK_commit_ordered) else lock(LOCK_group_commit) group_commit_queue_busy= FALSE unlock(LOCK_group_commit) ---- END ALGORITHM ---- There are a number of locks taken in the algorithm, but in the group_log_xid() case most of them should be uncontended most of the time. The LOCK_group_commit of course will be contended, as new threads queue up waiting for the previous group commit (and binlog fsync()) to finish so they can do the next group commit. This is the whole point of implementing group commit. The LOCK_prepare_ordered and LOCK_commit_ordered mutexes should be not much contended as long as handlers follow the intension of having the corresponding handler calls execute quickly. The per-thread LOCK_commit_ordered mutexes should not be contended; they are only used to wake up a sleeping thread. 1.4 Optimisations when not using all three new calls The prepare_ordered(), group_log_xid(), and commit_ordered() methods are optional, and if not implemented by a particular handler/transaction coordinator, we can optimise the algorithm to take advantage of not having to keep ordering for the missing parts. If there is no prepare_ordered(), then we need not take the LOCK_prepare_ordered mutex. If there is no commit_ordered(), then we need not take the LOCK_commit_ordered mutex. If there is no group_log_xid(), then we only need the queue to ensure same ordering of transactions for commit_ordered() as for prepare_ordered(). Thus, if either of these (or both) are also not present, we do not need to use the queue at all. 2. Binlog code changes (log.cc) The bulk of the work needed for the binary log is to extend the code to allow group commit to the log. Unlike InnoDB/XtraDB, there is no existing support inside the binlog code for group commit. The existing code runs most of the write + fsync to the binary lock under the global LOCK_log mutex, preventing any group commit. To enable group commit, this code must be split into two parts: - one part that runs per transaction, re-writing the embedded event positions for the correct offset, and writing this into the in-memory log cache. - another part that writes a set of transactions to the disk, and runs fsync(). Then in group_log_xid(), we can run the first part in a loop over all the transactions in the passed-in queue, and run the second part only once. The binlog code also has other code paths that write into the binlog, eg. non-transactional statements. These have to be adapted also to work with the new code. In order to get some group commit facility for these also, we change that part of the code in a similar way to ha_commit_trans. We keep another, binlog-internal queue of such non-transactional binlog writes, and such writes queue up here before sleeping on the LOCK_log mutex. Once a thread obtains the LOCK_log, it loops over the queue for the fast part, and does the slow part once, then finally wakes up the others in the queue. In the transactional case in group_log_xid(), before we run the passed-in queue, we add any members found in the binlog-internal queue. This allows these non-transactional writes to share the group commit. However, in the case where it is a non-transactional write that gets the LOCK_log, the transactional transactions from the ha_commit_trans() queue will not be able to take part (they will have to wait for their turn to do another fsync). It seems difficult to cleanly let the binlog code grab the queue from out of the ha_commit_trans() algorithm. I think the group commit is mostly useful in transactional workloads anyway (non-transactional engines will loose data anyway in case of crash, so why fsync() after each transaction?) 3. XtraDB changes (ha_innodb.cc) The changes needed in XtraDB are comparatively simple, as XtraDB already implements group commit, it just needs to be enabled with the new commit_ordered() call. The existing commit() method already is logically in two parts. The first part runs under the prepare_commit_mutex() and must be run in same order as binlog commit. This part needs to be moved to commit_ordered(). The second part runs after releasing prepare_commit_mutex and does transaction log write+fsync; it can remain. Then the prepare_commit_mutex is removed (and the enable_unsafe_group_commit XtraDB option to disable it). There are two asserts that check that the thread running the first part of XtraDB commit is the same as the thread running the other operations for the transaction. These have to be removed (as commit_ordered() can run in a different thread). Also an error reporting with sql_print_error() has to be delayed until commit() time. 4. Proof-of-concept implementation There is a proof-of-concept implementation of this architecture, in the form of a quilt patch series [3]. A quick benchmark was done, with sync_binlog=1 and innodb_flush_log_at_trx_commit=1. 64 parallel threads doing single-row transactions against one table. Without the patch, we get only 25 queries per second. With the patch, we get 650 queries per second. 5. Open issues/tasks 5.1 XA / other prepare() and commit() call sites. Check that user-level XA is handled correctly and working. And covered sufficiently with tests. Also check that any other calls of ha->prepare() and ha->commit() outside of ha_commit_trans() are handled correctly. 5.2 Testing This worklog needs additions to the test suite, including error inserts to check error handling, and synchronisation points to check thread parallelism correctness. 6. Alternative implementations - The binlog code maintains its own extra atomic transaction queue to handle non-transactional commits in a good way together with transactional (with respect to group commit). Alternatively, we could ignore this issue and just give up on group commit for non-transactional statements, for some code simplifications. - The binlog code has two ways to prepare end_event and similar, one that uses stack-allocation, and another for when stack allocation is not possible that uses thd->mem_root. Probably the overhead of thd->mem_root is so small that it would make sense to use the same code for both cases. - Instead of adding extra fields to THD, we could allocate a separate structure on the thd->mem_root() with the required extra fields (including the THD pointer). Would seem to require initialising mutexes at every commit though. - It would probably be a good idea to implement TC_LOG_MMAP::group_log_xid() (should not be hard). ----------------------------------------------------------------------- References: [2] https://secure.wikimedia.org/wikipedia/en/wiki/ABA_problem [3] https://knielsen-hq.org/maria/patches.mwl116/ ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0