- developers - lists.mariadb.org

[Maria-developers] request for comment: OQGRAPH in 5.1 packages
by Arjen Lentz 09 Nov '09

09 Nov '09

Hi all, fellow Maria captains in particular (but naturally anybody here can comment) We'd like to include the plugin for OQGRAPH engine in the 5.1 packages we're just about to build. It would not be pulled in like the xtradb/pbxt engines, but be compiled separately and not loaded in by default (people will have to do INSTALL PLUGIN) so that as long as it's not loaded, it can have no influence on the running of mysqld. The rationale is this. From the experience with PBXT, people really want/need binaries/ packages before they will try things. If 5.1 binaries had had PBXT plugin sitting there, lots more people would have tried it earlier, filed bugreports and feedback, and Paul would have been where he is now much quicker. With MariaDB pulling it in it's ok now, but it's just a darn waste and pity of the earlier time. Since 5.1's plugin infrastructure still requires a plugin to be compiled against close to exact the original mysqld source, the only way to ensure that is to compile them from the same source at the same time, next to eachother. So that's what I'm proposing. Nonsense like the feature preview builds that Sun/MySQL did just make no sense in the real world, people can't use that. So while sticking new plugins in a future version like 5.2 appears sensible, it doesn't actually help in getting the code out there and used which is of course the only way to get feedback and bugreports. The ability to have plugins distributed but not loaded is the key here, it allows us to get stuff out and those who want to try it can, without destabilising anything for those who don't. (On the practical side, since it's essentially separate it would get added during the source tarball prep in the builds, so no action required inside the maria tree) With the packages getting prepped now, I realise it's a tad short notice. Don't feel rushed, but do please reply when you read this, otherwise it might get lost in your email pile (I know my friends, as I know myself ;-) Thanks Cheers, Arjen.

7 11

[Maria-developers] Updated (by Alexi): Add a mysqlbinlog option to filter updates to certain tables (40)
by worklog-noreply＠askmonty.org 08 Nov '09

08 Nov '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to filter updates to certain tables CREATION DATE..: Mon, 10 Aug 2009, 13:25 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: Psergey CATEGORY.......: Server-RawIdeaBin TASK ID........: 40 (http://askmonty.org/worklog/?tid=40) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 2 ESTIMATE.......: 48 (hours remain) ORIG. ESTIMATE.: 48 PROGRESS NOTES: -=-=(Alexi - Sun, 08 Nov 2009, 15:18)=-=- Low Level Design modified. --- /tmp/wklog.40.old.15787 2009-11-08 15:18:11.000000000 +0200 +++ /tmp/wklog.40.new.15787 2009-11-08 15:18:11.000000000 +0200 @@ -62,7 +62,7 @@ it considers the query to extent to the end of the event. 2. For 'db' (current db) the trailing zero is redundant since the length is already known. -3. db_len = 0 means that this is the current db. +3. In tables_info, db_len = 0 means that this is the current db. When reading Query events from binary log, we can recognize its format by its post-header length: in extended case the post-header includes 4 @@ -75,6 +75,77 @@ + #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 + #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 + +*********************************************************************** +HELP NEEDED +*********************************************************************** +The QUERY_HEADER_LEN is used in the definition of MAX_LOG_EVENT_HEADER: + +log_event.h +~~~~~~~~~~~ +#define MAX_LOG_EVENT_HEADER ( /* in order of Query_log_event::write */ \ + LOG_EVENT_HEADER_LEN + /* write_header */ \ + QUERY_HEADER_LEN + /* write_data */ \ + EXECUTE_LOAD_QUERY_EXTRA_HEADER_LEN + /*write_post_header_for_derived */ \ + MAX_SIZE_LOG_EVENT_STATUS + /* status */ \ + NAME_LEN + 1) + +which is used only for setting + + thd->variables.max_allowed_packet + mysql->net.max_packet_size + +Looks like (but I am not quite sure) that QUERY_HEADER_LEN can simply +(without making any other changes) be substituted in this definition by +QUERY_HEADER_LEN_EXT. + +Below I list all places where MAX_LOG_EVENT_HEADER is used: + +slave.cc +~~~~~~~~ +static int init_slave_thread(...) +{ ... + /* + Adding MAX_LOG_EVENT_HEADER_LEN to the max_allowed_packet on all + slave threads, since a replication event can become this much larger + than the corresponding packet (query) sent from client to master. + */ + thd->variables.max_allowed_packet= global_system_variables.max_allowed_packet + + MAX_LOG_EVENT_HEADER; /* note, incr over the global not session var */ + ... +} +pthread_handler_t handle_slave_io(...) +{ ... + /* + Adding MAX_LOG_EVENT_HEADER_LEN to the max_packet_size on the I/O + thread, since a replication event can become this much larger than + the corresponding packet (query) sent from client to master. + */ + mysql->net.max_packet_size= thd->net.max_packet_size+= MAX_LOG_EVENT_HEADER; + ... +} + +sql_repl.cc +~~~~~~~~~~~ +void mysql_binlog_send(...) +{ ... + /* + Adding MAX_LOG_EVENT_HEADER_LEN, since a binlog event can become + this larger than the corresponding packet (query) sent + from client to master. + */ + thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER; + ... +} +bool mysql_show_binlog_events(...) +{ ... + /* + to account binlog event header size + */ + thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER; + ... +} + 3. Changes in log events ************************ @@ -84,7 +155,7 @@ This setting is done in Format description event constructor which creates the event for writing to binary log: - if (binlog_with_tables_info) + if (opt_binlog_with_tables_info) post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; else post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; @@ -99,12 +170,12 @@ following manner: switch (binlog_ver) { - case 4: /* MySQL 5.0 and higher */ + #ifndef MYSQL_CLIENT + case 4: /* MySQL 5.0 and higher */ ... -+ #else -+ <error> + break; + #endif + case 1: case 3: ... @@ -132,7 +203,7 @@ -------------------------------- [Creates the event for binlogging] -In case of binlog_with_tables_info = TRUE, set additionally query_len, +In case of opt_binlog_with_tables_info = TRUE, set additionally query_len, tables_info_len, and tables_info members (the constructor is to have an additional 'tables_info' argument). @@ -140,7 +211,7 @@ ---------------- [Writes the event to binlog] -In case of binlog_with_tables_info = TRUE, write additional members +In case of opt_binlog_with_tables_info = TRUE, write additional members (query_len, tables_info_len, and tables_info) to binary log. Also write corresponding whole event length to the common-header. -=-=(Alexi - Sun, 08 Nov 2009, 10:40)=-=- Low Level Design modified. --- /tmp/wklog.40.old.5055 2009-11-08 08:40:02.000000000 +0000 +++ /tmp/wklog.40.new.5055 2009-11-08 08:40:02.000000000 +0000 @@ -3,6 +3,7 @@ 1. Adding --binlog-with-tables-info option ****************************************** +GLOBAL, read-only option. When set, Query events are to be written in the extended binary format which contains tables_info. When not set, Query events -=-=(Alexi - Thu, 05 Nov 2009, 12:37)=-=- Low Level Design modified. --- /tmp/wklog.40.old.11441 2009-11-05 12:37:16.000000000 +0200 +++ /tmp/wklog.40.new.11441 2009-11-05 12:37:16.000000000 +0200 @@ -1,9 +1,18 @@ OPTION: 2.5 Extend Query Events With Tables Info ================================================ -1. Query_log_event Binary Format -******************************** -Changes to be done: +1. Adding --binlog-with-tables-info option +****************************************** + +When set, Query events are to be written in the extended binary +format which contains tables_info. When not set, Query events +are to be written in usual format (without any changes). + +2. Query event extended binary format +************************************* + +When --binlog-with-tables-info is set, Query events are writen +to binary log in the following (extended) format. Query_log_event binary format --------------------------------- @@ -24,12 +33,12 @@ error_code 2 status_vars_len 2 + query_len 2 (see Note 1) -+ tables_info_len 2 (see Note 2) ++ tables_info_len 2 --------------------------------- BODY: status_vars status_vars_len - db db_len + 1 -+ db db_len (see Note 3) ++ db db_len (see Note 2) query query_len + tables_info @@ -37,7 +46,7 @@ --------------------------------- Name Size (bytes) --------------------------------- - db_len 1 (see Note 4) + db_len 1 (see Note 3) db db_len table_name_len 1 table_name table_name_len @@ -48,19 +57,99 @@ table_name table_name_len NOTES -1. Currently Query_log_event format doesn't include 'query_len' because +1. In usual format, Query_log_event doesn't include 'query_len' because it considers the query to extent to the end of the event. -2. If tables_info is not included in the event (--binlog-with-tables-info - option), tables_info_len = 0. -3. The trailing zero is redundant since the length is already known. -4. In case of db = current db, db_len = 0 and db = empty, because - current db is already included in the current event format. +2. For 'db' (current db) the trailing zero is redundant since the length + is already known. +3. db_len = 0 means that this is the current db. + +When reading Query events from binary log, we can recognize its format +by its post-header length: in extended case the post-header includes 4 +additional bytes. + + #define QUERY_HEADER_LEN (QUERY_HEADER_MINIMAL_LEN + 4) ++ #define QUERY_HEADER_LEN_EXT (QUERY_HEADER_LEN + 4) + ... + #define Q_STATUS_VARS_LEN_OFFSET 11 ++ #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 ++ #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 + +3. Changes in log events +************************ + +3.1. Format description event +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Changes needed here concern setting post-header length for Query events. +This setting is done in Format description event constructor which creates +the event for writing to binary log: + + if (binlog_with_tables_info) + post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; + else + post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; + +This change is to be done only for case binlog_ver = 4. + +NOTE. The refered above constructor is allowed to be invoked in a client +context for creating "artificial" Format description events in case of +MySQL < 5.0 (e.g. see mysqlbinlog code). To avoid compilation problems +(because of 'binlog_with_tables_info') and taking into account the +"MySQL < 5.0" restriction, we have to #ifdef out the above code in +following manner: + + switch (binlog_ver) { + case 4: /* MySQL 5.0 and higher */ ++ #ifndef MYSQL_CLIENT + ... ++ #else ++ <error> ++ #endif + case 1: + case 3: + ... + } + +3.2. Query event +~~~~~~~~~~~~~~~~ +Changes needed here include adding tables_info and tables_info_len +members (member for query length already exists) and modifying the +following function-members: + +Query_log_event(buf) constructor +-------------------------------- +[Parses binary format written to the 'buf'] + +Getting post-header length from the Format description event (passed +to the constructor as an argument), define whether buf contains an +extended or usual Query event and parse the buf contents accordingly. + +NOTE. Defining Query event format here should be done with taking into +account that this constructor can be called within a Query-derived +event with the event_type argument != QUERY_EVENT. + +Query_log_event(thd) constructor +-------------------------------- +[Creates the event for binlogging] + +In case of binlog_with_tables_info = TRUE, set additionally query_len, +tables_info_len, and tables_info members (the constructor is to have +an additional 'tables_info' argument). + +write() function +---------------- +[Writes the event to binlog] + +In case of binlog_with_tables_info = TRUE, write additional members +(query_len, tables_info_len, and tables_info) to binary log. Also +write corresponding whole event length to the common-header. + +<To be continued> -2. Where to get tables info from? +4. Where to get tables info from? ********************************* -2.1. Case study: CREATE TABLE -****************************** +4.1. Case study: CREATE TABLE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** CREATE TABLE table [SELECT ...] @@ -129,4 +218,4 @@ } } -To be continued +<To be continued> -=-=(Alexi - Wed, 04 Nov 2009, 10:21)=-=- Low Level Design modified. --- /tmp/wklog.40.old.6734 2009-11-04 10:21:20.000000000 +0200 +++ /tmp/wklog.40.new.6734 2009-11-04 10:21:20.000000000 +0200 @@ -21,9 +21,9 @@ slave_proxy_id 4 exec_time 4 db_len 1 -+ query_len 2 (see Note 1) error_code 2 status_vars_len 2 ++ query_len 2 (see Note 1) + tables_info_len 2 (see Note 2) --------------------------------- BODY: -=-=(Alexi - Tue, 03 Nov 2009, 11:19)=-=- Low Level Design modified. --- /tmp/wklog.40.old.7187 2009-11-03 11:19:22.000000000 +0200 +++ /tmp/wklog.40.new.7187 2009-11-03 11:19:22.000000000 +0200 @@ -1 +1,132 @@ +OPTION: 2.5 Extend Query Events With Tables Info +================================================ +1. Query_log_event Binary Format +******************************** +Changes to be done: + + Query_log_event binary format + --------------------------------- + Name Size (bytes) + --------------------------------- + COMMON HEADER: + timestamp 4 + type 1 + server_id 4 + total_size 4 + master_position 4 + flags 2 + --------------------------------- + POST HEADER: + slave_proxy_id 4 + exec_time 4 + db_len 1 ++ query_len 2 (see Note 1) + error_code 2 + status_vars_len 2 ++ tables_info_len 2 (see Note 2) + --------------------------------- + BODY: + status_vars status_vars_len +- db db_len + 1 ++ db db_len (see Note 3) + query query_len ++ tables_info + + tables_info binary format + --------------------------------- + Name Size (bytes) + --------------------------------- + db_len 1 (see Note 4) + db db_len + table_name_len 1 + table_name table_name_len + ... + db_len 1 + db db_len + table_name_len 1 + table_name table_name_len + +NOTES +1. Currently Query_log_event format doesn't include 'query_len' because + it considers the query to extent to the end of the event. +2. If tables_info is not included in the event (--binlog-with-tables-info + option), tables_info_len = 0. +3. The trailing zero is redundant since the length is already known. +4. In case of db = current db, db_len = 0 and db = empty, because + current db is already included in the current event format. + +2. Where to get tables info from? +********************************* + +2.1. Case study: CREATE TABLE +****************************** + +*** CREATE TABLE table [SELECT ...] + + bool mysql_create_table_no_lock( + THD *thd, + const char *db, + const char *table_name, ...) + { + ... + // ------------------------------------- + // WL40: To be included in tables_info: + // * db, table_name + // * thd->lex->query_tables (tables refered to in + // the select-part; empty if no select-part) + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + +*** CREATE TABLE table LIKE src-table + + bool mysql_create_like_table( + ... + TABLE_LIST *table, + TABLE_LIST *src_table, + ...) + { + ... + if (thd->current_stmt_binlog_row_based) + { // RBR: In this case we don't replicate temp tables + if (!(create_info->options & HA_LEX_CREATE_TMP_TABLE)) + { + if (src_table->table->s->tmp_table) + { // CREATE normal-table LIKE temp-table: + + // Generate new query without LIKE-part + store_create_info(thd, table, &query, create_info, FALSE); + + // ------------------------------------- + // WL40: To include to tables_info: + // * table (src_table is not included) + // ------------------------------------- + write_bin_log(thd, TRUE, query.ptr(), query.length()); + } + else + { // CREATE normal-table LIKE normal-table + + // ------------------------------------- + // WL40: To include to log_tables_info: + // * table + // * src_table + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + } + // CREATE temp-table LIKE ... + // This case is not replicated + } + else + { // SBR: + // ------------------------------------- + // WL40: To include to tables_info: + // * table + // * src_table + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + } + +To be continued -=-=(Alexi - Mon, 02 Nov 2009, 11:34)=-=- Worked 2 hours on option 2.5 Worked 2 hours and estimate 48 hours remain (original estimate increased by 50 hours). -=-=(Alexi - Mon, 02 Nov 2009, 11:20)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.4848 2009-11-02 11:20:24.000000000 +0200 +++ /tmp/wklog.40.new.4848 2009-11-02 11:20:24.000000000 +0200 @@ -90,3 +90,25 @@ It might be useful to integrate this with the code that already handles --replicate-ignore-db and similar slave options. +2.5 Extend Query Events With Tables Info +---------------------------------------- + +We could extend query events structure with a tables info - a list of tables +which the query refers to: + + <current query event structure> + tables_info_len + dbase_len dbase + table_len table + ... + dbase_len dbase + table_len table + +Note. In case of <dbase> = current data base, we can set dbase_len = 0 + and dbase = empty because current query event structure already + includes current data base name. + +Note. Possibly it is reasonable also to add a --binlog-with-tables-info + option which defines whether tables info must be included to the + query events. + -=-=(Knielsen - Fri, 14 Aug 2009, 15:47)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.10896 2009-08-14 15:47:39.000000000 +0300 +++ /tmp/wklog.40.new.10896 2009-08-14 15:47:39.000000000 +0300 @@ -72,3 +72,21 @@ /* !mysqlbinlog: updates t1,db3.t2 */ UPDATE t1 LEFT JOIN ... and further processing in mysqlbinlog will be trivial. + +2.4 Implement server functionality to ignore certain tables +----------------------------------------------------------- + +We could add a general facility in the server to ignore certain tables: + + SET SESSION ignored_tables = "db1.t1,db2.t2"; + +This would work similar to --replicate-ignore-table, but in a general way not +restricted to the slave SQL thread. + +It would then be trivial for mysqlbinlog to add such statements at the start +of the output, or probably the user could just do it manually with no need for +additional options for mysqlbinlog. + +It might be useful to integrate this with the code that already handles +--replicate-ignore-db and similar slave options. + -=-=(Psergey - Mon, 10 Aug 2009, 15:41)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.12989 2009-08-10 15:41:23.000000000 +0300 +++ /tmp/wklog.40.new.12989 2009-08-10 15:41:23.000000000 +0300 @@ -1,6 +1,7 @@ - 1. Context ---------- +(See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global +overview) At the moment, the server has these replication slave options: --replicate-do-table=db.tbl -=-=(Guest - Mon, 10 Aug 2009, 14:52)=-=- Dependency created: 39 now depends on 40 ------------------------------------------------------------ -=-=(View All Progress Notes, 12 total)=-=- http://askmonty.org/worklog/index.pl?tid=40&nolimit=1 DESCRIPTION: Replication slave can be set to filter updates to certain tables with --replicate-[wild-]{do,ignore}-table options. This task is about adding similar functionality to mysqlbinlog. HIGH-LEVEL SPECIFICATION: 1. Context ---------- (See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global overview) At the moment, the server has these replication slave options: --replicate-do-table=db.tbl --replicate-ignore-table=db.tbl --replicate-wild-do-table=pattern.pattern --replicate-wild-ignore-table=pattern.pattern They affect both RBR and SBR events. SBR events are checked after the statement has been parsed, the server iterates over list of used tables and checks them againist --replicate instructions. What is interesting is that this scheme still allows to update the ignored table through a VIEW. 2. Table filtering in mysqlbinlog --------------------------------- Per-table filtering of RBR events is easy (as it is relatively easy to extract the name of the table that the event applies to). Per-table filtering of SBR events is hard, as generally it is not apparent which tables the statement refers to. This opens possible options: 2.1 Put the parser into mysqlbinlog ----------------------------------- Once we have a full parser in mysqlbinlog, we'll be able to check which tables are used by a statement, and will allow to show behaviour identical to those that one obtains when using --replicate-* slave options. (It is not clear how much effort is needed to put the parser into mysqlbinlog. Any guesses?) 2.2 Use dumb regexp match ------------------------- Use a really dumb approach. A query is considered to be modifying table X if it matches an expression CREATE TABLE $tablename DROP $tablename UPDATE ...$tablename ... SET // here '...' can't contain the word 'SET' DELETE ...$tablename ... WHERE // same as above ALTER TABLE $tablename .. etc (go get from the grammar) .. The advantage over doing the same in awk is that mysqlbinlog will also process RBR statements, and together with that will provide a working solution for those who are careful with their table names not mixing with string constants and such. (TODO: string constants are of particular concern as they come from [potentially hostile] users, unlike e.g. table aliases which come from [not hostile] developers. Remove also all string constants before attempting to do match?) 2.3 Have the master put annotations ----------------------------------- We could add a master option so that it injects into query a mark that tells which tables the query will affect, e.g. for the query UPDATE t1 LEFT JOIN db3.t2 ON ... WHERE ... the binlog will have /* !mysqlbinlog: updates t1,db3.t2 */ UPDATE t1 LEFT JOIN ... and further processing in mysqlbinlog will be trivial. 2.4 Implement server functionality to ignore certain tables ----------------------------------------------------------- We could add a general facility in the server to ignore certain tables: SET SESSION ignored_tables = "db1.t1,db2.t2"; This would work similar to --replicate-ignore-table, but in a general way not restricted to the slave SQL thread. It would then be trivial for mysqlbinlog to add such statements at the start of the output, or probably the user could just do it manually with no need for additional options for mysqlbinlog. It might be useful to integrate this with the code that already handles --replicate-ignore-db and similar slave options. 2.5 Extend Query Events With Tables Info ---------------------------------------- We could extend query events structure with a tables info - a list of tables which the query refers to: <current query event structure> tables_info_len dbase_len dbase table_len table ... dbase_len dbase table_len table Note. In case of <dbase> = current data base, we can set dbase_len = 0 and dbase = empty because current query event structure already includes current data base name. Note. Possibly it is reasonable also to add a --binlog-with-tables-info option which defines whether tables info must be included to the query events. LOW-LEVEL DESIGN: OPTION: 2.5 Extend Query Events With Tables Info ================================================ 1. Adding --binlog-with-tables-info option ****************************************** GLOBAL, read-only option. When set, Query events are to be written in the extended binary format which contains tables_info. When not set, Query events are to be written in usual format (without any changes). 2. Query event extended binary format ************************************* When --binlog-with-tables-info is set, Query events are writen to binary log in the following (extended) format. Query_log_event binary format --------------------------------- Name Size (bytes) --------------------------------- COMMON HEADER: timestamp 4 type 1 server_id 4 total_size 4 master_position 4 flags 2 --------------------------------- POST HEADER: slave_proxy_id 4 exec_time 4 db_len 1 error_code 2 status_vars_len 2 + query_len 2 (see Note 1) + tables_info_len 2 --------------------------------- BODY: status_vars status_vars_len - db db_len + 1 + db db_len (see Note 2) query query_len + tables_info tables_info binary format --------------------------------- Name Size (bytes) --------------------------------- db_len 1 (see Note 3) db db_len table_name_len 1 table_name table_name_len ... db_len 1 db db_len table_name_len 1 table_name table_name_len NOTES 1. In usual format, Query_log_event doesn't include 'query_len' because it considers the query to extent to the end of the event. 2. For 'db' (current db) the trailing zero is redundant since the length is already known. 3. In tables_info, db_len = 0 means that this is the current db. When reading Query events from binary log, we can recognize its format by its post-header length: in extended case the post-header includes 4 additional bytes. #define QUERY_HEADER_LEN (QUERY_HEADER_MINIMAL_LEN + 4) + #define QUERY_HEADER_LEN_EXT (QUERY_HEADER_LEN + 4) ... #define Q_STATUS_VARS_LEN_OFFSET 11 + #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 + #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 *********************************************************************** HELP NEEDED *********************************************************************** The QUERY_HEADER_LEN is used in the definition of MAX_LOG_EVENT_HEADER: log_event.h ~~~~~~~~~~~ #define MAX_LOG_EVENT_HEADER ( /* in order of Query_log_event::write */ \ LOG_EVENT_HEADER_LEN + /* write_header */ \ QUERY_HEADER_LEN + /* write_data */ \ EXECUTE_LOAD_QUERY_EXTRA_HEADER_LEN + /*write_post_header_for_derived */ \ MAX_SIZE_LOG_EVENT_STATUS + /* status */ \ NAME_LEN + 1) which is used only for setting thd->variables.max_allowed_packet mysql->net.max_packet_size Looks like (but I am not quite sure) that QUERY_HEADER_LEN can simply (without making any other changes) be substituted in this definition by QUERY_HEADER_LEN_EXT. Below I list all places where MAX_LOG_EVENT_HEADER is used: slave.cc ~~~~~~~~ static int init_slave_thread(...) { ... /* Adding MAX_LOG_EVENT_HEADER_LEN to the max_allowed_packet on all slave threads, since a replication event can become this much larger than the corresponding packet (query) sent from client to master. */ thd->variables.max_allowed_packet= global_system_variables.max_allowed_packet + MAX_LOG_EVENT_HEADER; /* note, incr over the global not session var */ ... } pthread_handler_t handle_slave_io(...) { ... /* Adding MAX_LOG_EVENT_HEADER_LEN to the max_packet_size on the I/O thread, since a replication event can become this much larger than the corresponding packet (query) sent from client to master. */ mysql->net.max_packet_size= thd->net.max_packet_size+= MAX_LOG_EVENT_HEADER; ... } sql_repl.cc ~~~~~~~~~~~ void mysql_binlog_send(...) { ... /* Adding MAX_LOG_EVENT_HEADER_LEN, since a binlog event can become this larger than the corresponding packet (query) sent from client to master. */ thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER; ... } bool mysql_show_binlog_events(...) { ... /* to account binlog event header size */ thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER; ... } 3. Changes in log events ************************ 3.1. Format description event ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes needed here concern setting post-header length for Query events. This setting is done in Format description event constructor which creates the event for writing to binary log: if (opt_binlog_with_tables_info) post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; else post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; This change is to be done only for case binlog_ver = 4. NOTE. The refered above constructor is allowed to be invoked in a client context for creating "artificial" Format description events in case of MySQL < 5.0 (e.g. see mysqlbinlog code). To avoid compilation problems (because of 'binlog_with_tables_info') and taking into account the "MySQL < 5.0" restriction, we have to #ifdef out the above code in following manner: switch (binlog_ver) { + #ifndef MYSQL_CLIENT case 4: /* MySQL 5.0 and higher */ ... break; + #endif case 1: case 3: ... } 3.2. Query event ~~~~~~~~~~~~~~~~ Changes needed here include adding tables_info and tables_info_len members (member for query length already exists) and modifying the following function-members: Query_log_event(buf) constructor -------------------------------- [Parses binary format written to the 'buf'] Getting post-header length from the Format description event (passed to the constructor as an argument), define whether buf contains an extended or usual Query event and parse the buf contents accordingly. NOTE. Defining Query event format here should be done with taking into account that this constructor can be called within a Query-derived event with the event_type argument != QUERY_EVENT. Query_log_event(thd) constructor -------------------------------- [Creates the event for binlogging] In case of opt_binlog_with_tables_info = TRUE, set additionally query_len, tables_info_len, and tables_info members (the constructor is to have an additional 'tables_info' argument). write() function ---------------- [Writes the event to binlog] In case of opt_binlog_with_tables_info = TRUE, write additional members (query_len, tables_info_len, and tables_info) to binary log. Also write corresponding whole event length to the common-header. <To be continued> 4. Where to get tables info from? ********************************* 4.1. Case study: CREATE TABLE ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** CREATE TABLE table [SELECT ...] bool mysql_create_table_no_lock( THD *thd, const char *db, const char *table_name, ...) { ... // ------------------------------------- // WL40: To be included in tables_info: // * db, table_name // * thd->lex->query_tables (tables refered to in // the select-part; empty if no select-part) // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } *** CREATE TABLE table LIKE src-table bool mysql_create_like_table( ... TABLE_LIST *table, TABLE_LIST *src_table, ...) { ... if (thd->current_stmt_binlog_row_based) { // RBR: In this case we don't replicate temp tables if (!(create_info->options & HA_LEX_CREATE_TMP_TABLE)) { if (src_table->table->s->tmp_table) { // CREATE normal-table LIKE temp-table: // Generate new query without LIKE-part store_create_info(thd, table, &query, create_info, FALSE); // ------------------------------------- // WL40: To include to tables_info: // * table (src_table is not included) // ------------------------------------- write_bin_log(thd, TRUE, query.ptr(), query.length()); } else { // CREATE normal-table LIKE normal-table // ------------------------------------- // WL40: To include to log_tables_info: // * table // * src_table // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } } // CREATE temp-table LIKE ... // This case is not replicated } else { // SBR: // ------------------------------------- // WL40: To include to tables_info: // * table // * src_table // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } } <To be continued> ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Alexi): Add a mysqlbinlog option to filter updates to certain tables (40)
by worklog-noreply＠askmonty.org 08 Nov '09

08 Nov '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to filter updates to certain tables CREATION DATE..: Mon, 10 Aug 2009, 13:25 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: Psergey CATEGORY.......: Server-RawIdeaBin TASK ID........: 40 (http://askmonty.org/worklog/?tid=40) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 2 ESTIMATE.......: 48 (hours remain) ORIG. ESTIMATE.: 48 PROGRESS NOTES: -=-=(Alexi - Sun, 08 Nov 2009, 15:18)=-=- Low Level Design modified. --- /tmp/wklog.40.old.15787 2009-11-08 15:18:11.000000000 +0200 +++ /tmp/wklog.40.new.15787 2009-11-08 15:18:11.000000000 +0200 @@ -62,7 +62,7 @@ it considers the query to extent to the end of the event. 2. For 'db' (current db) the trailing zero is redundant since the length is already known. -3. db_len = 0 means that this is the current db. +3. In tables_info, db_len = 0 means that this is the current db. When reading Query events from binary log, we can recognize its format by its post-header length: in extended case the post-header includes 4 @@ -75,6 +75,77 @@ + #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 + #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 + +*********************************************************************** +HELP NEEDED +*********************************************************************** +The QUERY_HEADER_LEN is used in the definition of MAX_LOG_EVENT_HEADER: + +log_event.h +~~~~~~~~~~~ +#define MAX_LOG_EVENT_HEADER ( /* in order of Query_log_event::write */ \ + LOG_EVENT_HEADER_LEN + /* write_header */ \ + QUERY_HEADER_LEN + /* write_data */ \ + EXECUTE_LOAD_QUERY_EXTRA_HEADER_LEN + /*write_post_header_for_derived */ \ + MAX_SIZE_LOG_EVENT_STATUS + /* status */ \ + NAME_LEN + 1) + +which is used only for setting + + thd->variables.max_allowed_packet + mysql->net.max_packet_size + +Looks like (but I am not quite sure) that QUERY_HEADER_LEN can simply +(without making any other changes) be substituted in this definition by +QUERY_HEADER_LEN_EXT. + +Below I list all places where MAX_LOG_EVENT_HEADER is used: + +slave.cc +~~~~~~~~ +static int init_slave_thread(...) +{ ... + /* + Adding MAX_LOG_EVENT_HEADER_LEN to the max_allowed_packet on all + slave threads, since a replication event can become this much larger + than the corresponding packet (query) sent from client to master. + */ + thd->variables.max_allowed_packet= global_system_variables.max_allowed_packet + + MAX_LOG_EVENT_HEADER; /* note, incr over the global not session var */ + ... +} +pthread_handler_t handle_slave_io(...) +{ ... + /* + Adding MAX_LOG_EVENT_HEADER_LEN to the max_packet_size on the I/O + thread, since a replication event can become this much larger than + the corresponding packet (query) sent from client to master. + */ + mysql->net.max_packet_size= thd->net.max_packet_size+= MAX_LOG_EVENT_HEADER; + ... +} + +sql_repl.cc +~~~~~~~~~~~ +void mysql_binlog_send(...) +{ ... + /* + Adding MAX_LOG_EVENT_HEADER_LEN, since a binlog event can become + this larger than the corresponding packet (query) sent + from client to master. + */ + thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER; + ... +} +bool mysql_show_binlog_events(...) +{ ... + /* + to account binlog event header size + */ + thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER; + ... +} + 3. Changes in log events ************************ @@ -84,7 +155,7 @@ This setting is done in Format description event constructor which creates the event for writing to binary log: - if (binlog_with_tables_info) + if (opt_binlog_with_tables_info) post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; else post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; @@ -99,12 +170,12 @@ following manner: switch (binlog_ver) { - case 4: /* MySQL 5.0 and higher */ + #ifndef MYSQL_CLIENT + case 4: /* MySQL 5.0 and higher */ ... -+ #else -+ <error> + break; + #endif + case 1: case 3: ... @@ -132,7 +203,7 @@ -------------------------------- [Creates the event for binlogging] -In case of binlog_with_tables_info = TRUE, set additionally query_len, +In case of opt_binlog_with_tables_info = TRUE, set additionally query_len, tables_info_len, and tables_info members (the constructor is to have an additional 'tables_info' argument). @@ -140,7 +211,7 @@ ---------------- [Writes the event to binlog] -In case of binlog_with_tables_info = TRUE, write additional members +In case of opt_binlog_with_tables_info = TRUE, write additional members (query_len, tables_info_len, and tables_info) to binary log. Also write corresponding whole event length to the common-header. -=-=(Alexi - Sun, 08 Nov 2009, 10:40)=-=- Low Level Design modified. --- /tmp/wklog.40.old.5055 2009-11-08 08:40:02.000000000 +0000 +++ /tmp/wklog.40.new.5055 2009-11-08 08:40:02.000000000 +0000 @@ -3,6 +3,7 @@ 1. Adding --binlog-with-tables-info option ****************************************** +GLOBAL, read-only option. When set, Query events are to be written in the extended binary format which contains tables_info. When not set, Query events -=-=(Alexi - Thu, 05 Nov 2009, 12:37)=-=- Low Level Design modified. --- /tmp/wklog.40.old.11441 2009-11-05 12:37:16.000000000 +0200 +++ /tmp/wklog.40.new.11441 2009-11-05 12:37:16.000000000 +0200 @@ -1,9 +1,18 @@ OPTION: 2.5 Extend Query Events With Tables Info ================================================ -1. Query_log_event Binary Format -******************************** -Changes to be done: +1. Adding --binlog-with-tables-info option +****************************************** + +When set, Query events are to be written in the extended binary +format which contains tables_info. When not set, Query events +are to be written in usual format (without any changes). + +2. Query event extended binary format +************************************* + +When --binlog-with-tables-info is set, Query events are writen +to binary log in the following (extended) format. Query_log_event binary format --------------------------------- @@ -24,12 +33,12 @@ error_code 2 status_vars_len 2 + query_len 2 (see Note 1) -+ tables_info_len 2 (see Note 2) ++ tables_info_len 2 --------------------------------- BODY: status_vars status_vars_len - db db_len + 1 -+ db db_len (see Note 3) ++ db db_len (see Note 2) query query_len + tables_info @@ -37,7 +46,7 @@ --------------------------------- Name Size (bytes) --------------------------------- - db_len 1 (see Note 4) + db_len 1 (see Note 3) db db_len table_name_len 1 table_name table_name_len @@ -48,19 +57,99 @@ table_name table_name_len NOTES -1. Currently Query_log_event format doesn't include 'query_len' because +1. In usual format, Query_log_event doesn't include 'query_len' because it considers the query to extent to the end of the event. -2. If tables_info is not included in the event (--binlog-with-tables-info - option), tables_info_len = 0. -3. The trailing zero is redundant since the length is already known. -4. In case of db = current db, db_len = 0 and db = empty, because - current db is already included in the current event format. +2. For 'db' (current db) the trailing zero is redundant since the length + is already known. +3. db_len = 0 means that this is the current db. + +When reading Query events from binary log, we can recognize its format +by its post-header length: in extended case the post-header includes 4 +additional bytes. + + #define QUERY_HEADER_LEN (QUERY_HEADER_MINIMAL_LEN + 4) ++ #define QUERY_HEADER_LEN_EXT (QUERY_HEADER_LEN + 4) + ... + #define Q_STATUS_VARS_LEN_OFFSET 11 ++ #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 ++ #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 + +3. Changes in log events +************************ + +3.1. Format description event +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Changes needed here concern setting post-header length for Query events. +This setting is done in Format description event constructor which creates +the event for writing to binary log: + + if (binlog_with_tables_info) + post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; + else + post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; + +This change is to be done only for case binlog_ver = 4. + +NOTE. The refered above constructor is allowed to be invoked in a client +context for creating "artificial" Format description events in case of +MySQL < 5.0 (e.g. see mysqlbinlog code). To avoid compilation problems +(because of 'binlog_with_tables_info') and taking into account the +"MySQL < 5.0" restriction, we have to #ifdef out the above code in +following manner: + + switch (binlog_ver) { + case 4: /* MySQL 5.0 and higher */ ++ #ifndef MYSQL_CLIENT + ... ++ #else ++ <error> ++ #endif + case 1: + case 3: + ... + } + +3.2. Query event +~~~~~~~~~~~~~~~~ +Changes needed here include adding tables_info and tables_info_len +members (member for query length already exists) and modifying the +following function-members: + +Query_log_event(buf) constructor +-------------------------------- +[Parses binary format written to the 'buf'] + +Getting post-header length from the Format description event (passed +to the constructor as an argument), define whether buf contains an +extended or usual Query event and parse the buf contents accordingly. + +NOTE. Defining Query event format here should be done with taking into +account that this constructor can be called within a Query-derived +event with the event_type argument != QUERY_EVENT. + +Query_log_event(thd) constructor +-------------------------------- +[Creates the event for binlogging] + +In case of binlog_with_tables_info = TRUE, set additionally query_len, +tables_info_len, and tables_info members (the constructor is to have +an additional 'tables_info' argument). + +write() function +---------------- +[Writes the event to binlog] + +In case of binlog_with_tables_info = TRUE, write additional members +(query_len, tables_info_len, and tables_info) to binary log. Also +write corresponding whole event length to the common-header. + +<To be continued> -2. Where to get tables info from? +4. Where to get tables info from? ********************************* -2.1. Case study: CREATE TABLE -****************************** +4.1. Case study: CREATE TABLE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** CREATE TABLE table [SELECT ...] @@ -129,4 +218,4 @@ } } -To be continued +<To be continued> -=-=(Alexi - Wed, 04 Nov 2009, 10:21)=-=- Low Level Design modified. --- /tmp/wklog.40.old.6734 2009-11-04 10:21:20.000000000 +0200 +++ /tmp/wklog.40.new.6734 2009-11-04 10:21:20.000000000 +0200 @@ -21,9 +21,9 @@ slave_proxy_id 4 exec_time 4 db_len 1 -+ query_len 2 (see Note 1) error_code 2 status_vars_len 2 ++ query_len 2 (see Note 1) + tables_info_len 2 (see Note 2) --------------------------------- BODY: -=-=(Alexi - Tue, 03 Nov 2009, 11:19)=-=- Low Level Design modified. --- /tmp/wklog.40.old.7187 2009-11-03 11:19:22.000000000 +0200 +++ /tmp/wklog.40.new.7187 2009-11-03 11:19:22.000000000 +0200 @@ -1 +1,132 @@ +OPTION: 2.5 Extend Query Events With Tables Info +================================================ +1. Query_log_event Binary Format +******************************** +Changes to be done: + + Query_log_event binary format + --------------------------------- + Name Size (bytes) + --------------------------------- + COMMON HEADER: + timestamp 4 + type 1 + server_id 4 + total_size 4 + master_position 4 + flags 2 + --------------------------------- + POST HEADER: + slave_proxy_id 4 + exec_time 4 + db_len 1 ++ query_len 2 (see Note 1) + error_code 2 + status_vars_len 2 ++ tables_info_len 2 (see Note 2) + --------------------------------- + BODY: + status_vars status_vars_len +- db db_len + 1 ++ db db_len (see Note 3) + query query_len ++ tables_info + + tables_info binary format + --------------------------------- + Name Size (bytes) + --------------------------------- + db_len 1 (see Note 4) + db db_len + table_name_len 1 + table_name table_name_len + ... + db_len 1 + db db_len + table_name_len 1 + table_name table_name_len + +NOTES +1. Currently Query_log_event format doesn't include 'query_len' because + it considers the query to extent to the end of the event. +2. If tables_info is not included in the event (--binlog-with-tables-info + option), tables_info_len = 0. +3. The trailing zero is redundant since the length is already known. +4. In case of db = current db, db_len = 0 and db = empty, because + current db is already included in the current event format. + +2. Where to get tables info from? +********************************* + +2.1. Case study: CREATE TABLE +****************************** + +*** CREATE TABLE table [SELECT ...] + + bool mysql_create_table_no_lock( + THD *thd, + const char *db, + const char *table_name, ...) + { + ... + // ------------------------------------- + // WL40: To be included in tables_info: + // * db, table_name + // * thd->lex->query_tables (tables refered to in + // the select-part; empty if no select-part) + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + +*** CREATE TABLE table LIKE src-table + + bool mysql_create_like_table( + ... + TABLE_LIST *table, + TABLE_LIST *src_table, + ...) + { + ... + if (thd->current_stmt_binlog_row_based) + { // RBR: In this case we don't replicate temp tables + if (!(create_info->options & HA_LEX_CREATE_TMP_TABLE)) + { + if (src_table->table->s->tmp_table) + { // CREATE normal-table LIKE temp-table: + + // Generate new query without LIKE-part + store_create_info(thd, table, &query, create_info, FALSE); + + // ------------------------------------- + // WL40: To include to tables_info: + // * table (src_table is not included) + // ------------------------------------- + write_bin_log(thd, TRUE, query.ptr(), query.length()); + } + else + { // CREATE normal-table LIKE normal-table + + // ------------------------------------- + // WL40: To include to log_tables_info: + // * table + // * src_table + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + } + // CREATE temp-table LIKE ... + // This case is not replicated + } + else + { // SBR: + // ------------------------------------- + // WL40: To include to tables_info: + // * table + // * src_table + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + } + +To be continued -=-=(Alexi - Mon, 02 Nov 2009, 11:34)=-=- Worked 2 hours on option 2.5 Worked 2 hours and estimate 48 hours remain (original estimate increased by 50 hours). -=-=(Alexi - Mon, 02 Nov 2009, 11:20)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.4848 2009-11-02 11:20:24.000000000 +0200 +++ /tmp/wklog.40.new.4848 2009-11-02 11:20:24.000000000 +0200 @@ -90,3 +90,25 @@ It might be useful to integrate this with the code that already handles --replicate-ignore-db and similar slave options. +2.5 Extend Query Events With Tables Info +---------------------------------------- + +We could extend query events structure with a tables info - a list of tables +which the query refers to: + + <current query event structure> + tables_info_len + dbase_len dbase + table_len table + ... + dbase_len dbase + table_len table + +Note. In case of <dbase> = current data base, we can set dbase_len = 0 + and dbase = empty because current query event structure already + includes current data base name. + +Note. Possibly it is reasonable also to add a --binlog-with-tables-info + option which defines whether tables info must be included to the + query events. + -=-=(Knielsen - Fri, 14 Aug 2009, 15:47)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.10896 2009-08-14 15:47:39.000000000 +0300 +++ /tmp/wklog.40.new.10896 2009-08-14 15:47:39.000000000 +0300 @@ -72,3 +72,21 @@ /* !mysqlbinlog: updates t1,db3.t2 */ UPDATE t1 LEFT JOIN ... and further processing in mysqlbinlog will be trivial. + +2.4 Implement server functionality to ignore certain tables +----------------------------------------------------------- + +We could add a general facility in the server to ignore certain tables: + + SET SESSION ignored_tables = "db1.t1,db2.t2"; + +This would work similar to --replicate-ignore-table, but in a general way not +restricted to the slave SQL thread. + +It would then be trivial for mysqlbinlog to add such statements at the start +of the output, or probably the user could just do it manually with no need for +additional options for mysqlbinlog. + +It might be useful to integrate this with the code that already handles +--replicate-ignore-db and similar slave options. + -=-=(Psergey - Mon, 10 Aug 2009, 15:41)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.12989 2009-08-10 15:41:23.000000000 +0300 +++ /tmp/wklog.40.new.12989 2009-08-10 15:41:23.000000000 +0300 @@ -1,6 +1,7 @@ - 1. Context ---------- +(See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global +overview) At the moment, the server has these replication slave options: --replicate-do-table=db.tbl -=-=(Guest - Mon, 10 Aug 2009, 14:52)=-=- Dependency created: 39 now depends on 40 ------------------------------------------------------------ -=-=(View All Progress Notes, 12 total)=-=- http://askmonty.org/worklog/index.pl?tid=40&nolimit=1 DESCRIPTION: Replication slave can be set to filter updates to certain tables with --replicate-[wild-]{do,ignore}-table options. This task is about adding similar functionality to mysqlbinlog. HIGH-LEVEL SPECIFICATION: 1. Context ---------- (See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global overview) At the moment, the server has these replication slave options: --replicate-do-table=db.tbl --replicate-ignore-table=db.tbl --replicate-wild-do-table=pattern.pattern --replicate-wild-ignore-table=pattern.pattern They affect both RBR and SBR events. SBR events are checked after the statement has been parsed, the server iterates over list of used tables and checks them againist --replicate instructions. What is interesting is that this scheme still allows to update the ignored table through a VIEW. 2. Table filtering in mysqlbinlog --------------------------------- Per-table filtering of RBR events is easy (as it is relatively easy to extract the name of the table that the event applies to). Per-table filtering of SBR events is hard, as generally it is not apparent which tables the statement refers to. This opens possible options: 2.1 Put the parser into mysqlbinlog ----------------------------------- Once we have a full parser in mysqlbinlog, we'll be able to check which tables are used by a statement, and will allow to show behaviour identical to those that one obtains when using --replicate-* slave options. (It is not clear how much effort is needed to put the parser into mysqlbinlog. Any guesses?) 2.2 Use dumb regexp match ------------------------- Use a really dumb approach. A query is considered to be modifying table X if it matches an expression CREATE TABLE $tablename DROP $tablename UPDATE ...$tablename ... SET // here '...' can't contain the word 'SET' DELETE ...$tablename ... WHERE // same as above ALTER TABLE $tablename .. etc (go get from the grammar) .. The advantage over doing the same in awk is that mysqlbinlog will also process RBR statements, and together with that will provide a working solution for those who are careful with their table names not mixing with string constants and such. (TODO: string constants are of particular concern as they come from [potentially hostile] users, unlike e.g. table aliases which come from [not hostile] developers. Remove also all string constants before attempting to do match?) 2.3 Have the master put annotations ----------------------------------- We could add a master option so that it injects into query a mark that tells which tables the query will affect, e.g. for the query UPDATE t1 LEFT JOIN db3.t2 ON ... WHERE ... the binlog will have /* !mysqlbinlog: updates t1,db3.t2 */ UPDATE t1 LEFT JOIN ... and further processing in mysqlbinlog will be trivial. 2.4 Implement server functionality to ignore certain tables ----------------------------------------------------------- We could add a general facility in the server to ignore certain tables: SET SESSION ignored_tables = "db1.t1,db2.t2"; This would work similar to --replicate-ignore-table, but in a general way not restricted to the slave SQL thread. It would then be trivial for mysqlbinlog to add such statements at the start of the output, or probably the user could just do it manually with no need for additional options for mysqlbinlog. It might be useful to integrate this with the code that already handles --replicate-ignore-db and similar slave options. 2.5 Extend Query Events With Tables Info ---------------------------------------- We could extend query events structure with a tables info - a list of tables which the query refers to: <current query event structure> tables_info_len dbase_len dbase table_len table ... dbase_len dbase table_len table Note. In case of <dbase> = current data base, we can set dbase_len = 0 and dbase = empty because current query event structure already includes current data base name. Note. Possibly it is reasonable also to add a --binlog-with-tables-info option which defines whether tables info must be included to the query events. LOW-LEVEL DESIGN: OPTION: 2.5 Extend Query Events With Tables Info ================================================ 1. Adding --binlog-with-tables-info option ****************************************** GLOBAL, read-only option. When set, Query events are to be written in the extended binary format which contains tables_info. When not set, Query events are to be written in usual format (without any changes). 2. Query event extended binary format ************************************* When --binlog-with-tables-info is set, Query events are writen to binary log in the following (extended) format. Query_log_event binary format --------------------------------- Name Size (bytes) --------------------------------- COMMON HEADER: timestamp 4 type 1 server_id 4 total_size 4 master_position 4 flags 2 --------------------------------- POST HEADER: slave_proxy_id 4 exec_time 4 db_len 1 error_code 2 status_vars_len 2 + query_len 2 (see Note 1) + tables_info_len 2 --------------------------------- BODY: status_vars status_vars_len - db db_len + 1 + db db_len (see Note 2) query query_len + tables_info tables_info binary format --------------------------------- Name Size (bytes) --------------------------------- db_len 1 (see Note 3) db db_len table_name_len 1 table_name table_name_len ... db_len 1 db db_len table_name_len 1 table_name table_name_len NOTES 1. In usual format, Query_log_event doesn't include 'query_len' because it considers the query to extent to the end of the event. 2. For 'db' (current db) the trailing zero is redundant since the length is already known. 3. In tables_info, db_len = 0 means that this is the current db. When reading Query events from binary log, we can recognize its format by its post-header length: in extended case the post-header includes 4 additional bytes. #define QUERY_HEADER_LEN (QUERY_HEADER_MINIMAL_LEN + 4) + #define QUERY_HEADER_LEN_EXT (QUERY_HEADER_LEN + 4) ... #define Q_STATUS_VARS_LEN_OFFSET 11 + #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 + #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 *********************************************************************** HELP NEEDED *********************************************************************** The QUERY_HEADER_LEN is used in the definition of MAX_LOG_EVENT_HEADER: log_event.h ~~~~~~~~~~~ #define MAX_LOG_EVENT_HEADER ( /* in order of Query_log_event::write */ \ LOG_EVENT_HEADER_LEN + /* write_header */ \ QUERY_HEADER_LEN + /* write_data */ \ EXECUTE_LOAD_QUERY_EXTRA_HEADER_LEN + /*write_post_header_for_derived */ \ MAX_SIZE_LOG_EVENT_STATUS + /* status */ \ NAME_LEN + 1) which is used only for setting thd->variables.max_allowed_packet mysql->net.max_packet_size Looks like (but I am not quite sure) that QUERY_HEADER_LEN can simply (without making any other changes) be substituted in this definition by QUERY_HEADER_LEN_EXT. Below I list all places where MAX_LOG_EVENT_HEADER is used: slave.cc ~~~~~~~~ static int init_slave_thread(...) { ... /* Adding MAX_LOG_EVENT_HEADER_LEN to the max_allowed_packet on all slave threads, since a replication event can become this much larger than the corresponding packet (query) sent from client to master. */ thd->variables.max_allowed_packet= global_system_variables.max_allowed_packet + MAX_LOG_EVENT_HEADER; /* note, incr over the global not session var */ ... } pthread_handler_t handle_slave_io(...) { ... /* Adding MAX_LOG_EVENT_HEADER_LEN to the max_packet_size on the I/O thread, since a replication event can become this much larger than the corresponding packet (query) sent from client to master. */ mysql->net.max_packet_size= thd->net.max_packet_size+= MAX_LOG_EVENT_HEADER; ... } sql_repl.cc ~~~~~~~~~~~ void mysql_binlog_send(...) { ... /* Adding MAX_LOG_EVENT_HEADER_LEN, since a binlog event can become this larger than the corresponding packet (query) sent from client to master. */ thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER; ... } bool mysql_show_binlog_events(...) { ... /* to account binlog event header size */ thd->variables.max_allowed_packet+= MAX_LOG_EVENT_HEADER; ... } 3. Changes in log events ************************ 3.1. Format description event ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes needed here concern setting post-header length for Query events. This setting is done in Format description event constructor which creates the event for writing to binary log: if (opt_binlog_with_tables_info) post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; else post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; This change is to be done only for case binlog_ver = 4. NOTE. The refered above constructor is allowed to be invoked in a client context for creating "artificial" Format description events in case of MySQL < 5.0 (e.g. see mysqlbinlog code). To avoid compilation problems (because of 'binlog_with_tables_info') and taking into account the "MySQL < 5.0" restriction, we have to #ifdef out the above code in following manner: switch (binlog_ver) { + #ifndef MYSQL_CLIENT case 4: /* MySQL 5.0 and higher */ ... break; + #endif case 1: case 3: ... } 3.2. Query event ~~~~~~~~~~~~~~~~ Changes needed here include adding tables_info and tables_info_len members (member for query length already exists) and modifying the following function-members: Query_log_event(buf) constructor -------------------------------- [Parses binary format written to the 'buf'] Getting post-header length from the Format description event (passed to the constructor as an argument), define whether buf contains an extended or usual Query event and parse the buf contents accordingly. NOTE. Defining Query event format here should be done with taking into account that this constructor can be called within a Query-derived event with the event_type argument != QUERY_EVENT. Query_log_event(thd) constructor -------------------------------- [Creates the event for binlogging] In case of opt_binlog_with_tables_info = TRUE, set additionally query_len, tables_info_len, and tables_info members (the constructor is to have an additional 'tables_info' argument). write() function ---------------- [Writes the event to binlog] In case of opt_binlog_with_tables_info = TRUE, write additional members (query_len, tables_info_len, and tables_info) to binary log. Also write corresponding whole event length to the common-header. <To be continued> 4. Where to get tables info from? ********************************* 4.1. Case study: CREATE TABLE ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** CREATE TABLE table [SELECT ...] bool mysql_create_table_no_lock( THD *thd, const char *db, const char *table_name, ...) { ... // ------------------------------------- // WL40: To be included in tables_info: // * db, table_name // * thd->lex->query_tables (tables refered to in // the select-part; empty if no select-part) // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } *** CREATE TABLE table LIKE src-table bool mysql_create_like_table( ... TABLE_LIST *table, TABLE_LIST *src_table, ...) { ... if (thd->current_stmt_binlog_row_based) { // RBR: In this case we don't replicate temp tables if (!(create_info->options & HA_LEX_CREATE_TMP_TABLE)) { if (src_table->table->s->tmp_table) { // CREATE normal-table LIKE temp-table: // Generate new query without LIKE-part store_create_info(thd, table, &query, create_info, FALSE); // ------------------------------------- // WL40: To include to tables_info: // * table (src_table is not included) // ------------------------------------- write_bin_log(thd, TRUE, query.ptr(), query.length()); } else { // CREATE normal-table LIKE normal-table // ------------------------------------- // WL40: To include to log_tables_info: // * table // * src_table // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } } // CREATE temp-table LIKE ... // This case is not replicated } else { // SBR: // ------------------------------------- // WL40: To include to tables_info: // * table // * src_table // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } } <To be continued> ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Alexi): Add a mysqlbinlog option to filter updates to certain tables (40)
by worklog-noreply＠askmonty.org 08 Nov '09

08 Nov '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to filter updates to certain tables CREATION DATE..: Mon, 10 Aug 2009, 13:25 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: Psergey CATEGORY.......: Server-RawIdeaBin TASK ID........: 40 (http://askmonty.org/worklog/?tid=40) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 2 ESTIMATE.......: 48 (hours remain) ORIG. ESTIMATE.: 48 PROGRESS NOTES: -=-=(Alexi - Sun, 08 Nov 2009, 10:40)=-=- Low Level Design modified. --- /tmp/wklog.40.old.5055 2009-11-08 08:40:02.000000000 +0000 +++ /tmp/wklog.40.new.5055 2009-11-08 08:40:02.000000000 +0000 @@ -3,6 +3,7 @@ 1. Adding --binlog-with-tables-info option ****************************************** +GLOBAL, read-only option. When set, Query events are to be written in the extended binary format which contains tables_info. When not set, Query events -=-=(Alexi - Thu, 05 Nov 2009, 12:37)=-=- Low Level Design modified. --- /tmp/wklog.40.old.11441 2009-11-05 12:37:16.000000000 +0200 +++ /tmp/wklog.40.new.11441 2009-11-05 12:37:16.000000000 +0200 @@ -1,9 +1,18 @@ OPTION: 2.5 Extend Query Events With Tables Info ================================================ -1. Query_log_event Binary Format -******************************** -Changes to be done: +1. Adding --binlog-with-tables-info option +****************************************** + +When set, Query events are to be written in the extended binary +format which contains tables_info. When not set, Query events +are to be written in usual format (without any changes). + +2. Query event extended binary format +************************************* + +When --binlog-with-tables-info is set, Query events are writen +to binary log in the following (extended) format. Query_log_event binary format --------------------------------- @@ -24,12 +33,12 @@ error_code 2 status_vars_len 2 + query_len 2 (see Note 1) -+ tables_info_len 2 (see Note 2) ++ tables_info_len 2 --------------------------------- BODY: status_vars status_vars_len - db db_len + 1 -+ db db_len (see Note 3) ++ db db_len (see Note 2) query query_len + tables_info @@ -37,7 +46,7 @@ --------------------------------- Name Size (bytes) --------------------------------- - db_len 1 (see Note 4) + db_len 1 (see Note 3) db db_len table_name_len 1 table_name table_name_len @@ -48,19 +57,99 @@ table_name table_name_len NOTES -1. Currently Query_log_event format doesn't include 'query_len' because +1. In usual format, Query_log_event doesn't include 'query_len' because it considers the query to extent to the end of the event. -2. If tables_info is not included in the event (--binlog-with-tables-info - option), tables_info_len = 0. -3. The trailing zero is redundant since the length is already known. -4. In case of db = current db, db_len = 0 and db = empty, because - current db is already included in the current event format. +2. For 'db' (current db) the trailing zero is redundant since the length + is already known. +3. db_len = 0 means that this is the current db. + +When reading Query events from binary log, we can recognize its format +by its post-header length: in extended case the post-header includes 4 +additional bytes. + + #define QUERY_HEADER_LEN (QUERY_HEADER_MINIMAL_LEN + 4) ++ #define QUERY_HEADER_LEN_EXT (QUERY_HEADER_LEN + 4) + ... + #define Q_STATUS_VARS_LEN_OFFSET 11 ++ #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 ++ #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 + +3. Changes in log events +************************ + +3.1. Format description event +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Changes needed here concern setting post-header length for Query events. +This setting is done in Format description event constructor which creates +the event for writing to binary log: + + if (binlog_with_tables_info) + post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; + else + post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; + +This change is to be done only for case binlog_ver = 4. + +NOTE. The refered above constructor is allowed to be invoked in a client +context for creating "artificial" Format description events in case of +MySQL < 5.0 (e.g. see mysqlbinlog code). To avoid compilation problems +(because of 'binlog_with_tables_info') and taking into account the +"MySQL < 5.0" restriction, we have to #ifdef out the above code in +following manner: + + switch (binlog_ver) { + case 4: /* MySQL 5.0 and higher */ ++ #ifndef MYSQL_CLIENT + ... ++ #else ++ <error> ++ #endif + case 1: + case 3: + ... + } + +3.2. Query event +~~~~~~~~~~~~~~~~ +Changes needed here include adding tables_info and tables_info_len +members (member for query length already exists) and modifying the +following function-members: + +Query_log_event(buf) constructor +-------------------------------- +[Parses binary format written to the 'buf'] + +Getting post-header length from the Format description event (passed +to the constructor as an argument), define whether buf contains an +extended or usual Query event and parse the buf contents accordingly. + +NOTE. Defining Query event format here should be done with taking into +account that this constructor can be called within a Query-derived +event with the event_type argument != QUERY_EVENT. + +Query_log_event(thd) constructor +-------------------------------- +[Creates the event for binlogging] + +In case of binlog_with_tables_info = TRUE, set additionally query_len, +tables_info_len, and tables_info members (the constructor is to have +an additional 'tables_info' argument). + +write() function +---------------- +[Writes the event to binlog] + +In case of binlog_with_tables_info = TRUE, write additional members +(query_len, tables_info_len, and tables_info) to binary log. Also +write corresponding whole event length to the common-header. + +<To be continued> -2. Where to get tables info from? +4. Where to get tables info from? ********************************* -2.1. Case study: CREATE TABLE -****************************** +4.1. Case study: CREATE TABLE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** CREATE TABLE table [SELECT ...] @@ -129,4 +218,4 @@ } } -To be continued +<To be continued> -=-=(Alexi - Wed, 04 Nov 2009, 10:21)=-=- Low Level Design modified. --- /tmp/wklog.40.old.6734 2009-11-04 10:21:20.000000000 +0200 +++ /tmp/wklog.40.new.6734 2009-11-04 10:21:20.000000000 +0200 @@ -21,9 +21,9 @@ slave_proxy_id 4 exec_time 4 db_len 1 -+ query_len 2 (see Note 1) error_code 2 status_vars_len 2 ++ query_len 2 (see Note 1) + tables_info_len 2 (see Note 2) --------------------------------- BODY: -=-=(Alexi - Tue, 03 Nov 2009, 11:19)=-=- Low Level Design modified. --- /tmp/wklog.40.old.7187 2009-11-03 11:19:22.000000000 +0200 +++ /tmp/wklog.40.new.7187 2009-11-03 11:19:22.000000000 +0200 @@ -1 +1,132 @@ +OPTION: 2.5 Extend Query Events With Tables Info +================================================ +1. Query_log_event Binary Format +******************************** +Changes to be done: + + Query_log_event binary format + --------------------------------- + Name Size (bytes) + --------------------------------- + COMMON HEADER: + timestamp 4 + type 1 + server_id 4 + total_size 4 + master_position 4 + flags 2 + --------------------------------- + POST HEADER: + slave_proxy_id 4 + exec_time 4 + db_len 1 ++ query_len 2 (see Note 1) + error_code 2 + status_vars_len 2 ++ tables_info_len 2 (see Note 2) + --------------------------------- + BODY: + status_vars status_vars_len +- db db_len + 1 ++ db db_len (see Note 3) + query query_len ++ tables_info + + tables_info binary format + --------------------------------- + Name Size (bytes) + --------------------------------- + db_len 1 (see Note 4) + db db_len + table_name_len 1 + table_name table_name_len + ... + db_len 1 + db db_len + table_name_len 1 + table_name table_name_len + +NOTES +1. Currently Query_log_event format doesn't include 'query_len' because + it considers the query to extent to the end of the event. +2. If tables_info is not included in the event (--binlog-with-tables-info + option), tables_info_len = 0. +3. The trailing zero is redundant since the length is already known. +4. In case of db = current db, db_len = 0 and db = empty, because + current db is already included in the current event format. + +2. Where to get tables info from? +********************************* + +2.1. Case study: CREATE TABLE +****************************** + +*** CREATE TABLE table [SELECT ...] + + bool mysql_create_table_no_lock( + THD *thd, + const char *db, + const char *table_name, ...) + { + ... + // ------------------------------------- + // WL40: To be included in tables_info: + // * db, table_name + // * thd->lex->query_tables (tables refered to in + // the select-part; empty if no select-part) + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + +*** CREATE TABLE table LIKE src-table + + bool mysql_create_like_table( + ... + TABLE_LIST *table, + TABLE_LIST *src_table, + ...) + { + ... + if (thd->current_stmt_binlog_row_based) + { // RBR: In this case we don't replicate temp tables + if (!(create_info->options & HA_LEX_CREATE_TMP_TABLE)) + { + if (src_table->table->s->tmp_table) + { // CREATE normal-table LIKE temp-table: + + // Generate new query without LIKE-part + store_create_info(thd, table, &query, create_info, FALSE); + + // ------------------------------------- + // WL40: To include to tables_info: + // * table (src_table is not included) + // ------------------------------------- + write_bin_log(thd, TRUE, query.ptr(), query.length()); + } + else + { // CREATE normal-table LIKE normal-table + + // ------------------------------------- + // WL40: To include to log_tables_info: + // * table + // * src_table + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + } + // CREATE temp-table LIKE ... + // This case is not replicated + } + else + { // SBR: + // ------------------------------------- + // WL40: To include to tables_info: + // * table + // * src_table + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + } + +To be continued -=-=(Alexi - Mon, 02 Nov 2009, 11:34)=-=- Worked 2 hours on option 2.5 Worked 2 hours and estimate 48 hours remain (original estimate increased by 50 hours). -=-=(Alexi - Mon, 02 Nov 2009, 11:20)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.4848 2009-11-02 11:20:24.000000000 +0200 +++ /tmp/wklog.40.new.4848 2009-11-02 11:20:24.000000000 +0200 @@ -90,3 +90,25 @@ It might be useful to integrate this with the code that already handles --replicate-ignore-db and similar slave options. +2.5 Extend Query Events With Tables Info +---------------------------------------- + +We could extend query events structure with a tables info - a list of tables +which the query refers to: + + <current query event structure> + tables_info_len + dbase_len dbase + table_len table + ... + dbase_len dbase + table_len table + +Note. In case of <dbase> = current data base, we can set dbase_len = 0 + and dbase = empty because current query event structure already + includes current data base name. + +Note. Possibly it is reasonable also to add a --binlog-with-tables-info + option which defines whether tables info must be included to the + query events. + -=-=(Knielsen - Fri, 14 Aug 2009, 15:47)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.10896 2009-08-14 15:47:39.000000000 +0300 +++ /tmp/wklog.40.new.10896 2009-08-14 15:47:39.000000000 +0300 @@ -72,3 +72,21 @@ /* !mysqlbinlog: updates t1,db3.t2 */ UPDATE t1 LEFT JOIN ... and further processing in mysqlbinlog will be trivial. + +2.4 Implement server functionality to ignore certain tables +----------------------------------------------------------- + +We could add a general facility in the server to ignore certain tables: + + SET SESSION ignored_tables = "db1.t1,db2.t2"; + +This would work similar to --replicate-ignore-table, but in a general way not +restricted to the slave SQL thread. + +It would then be trivial for mysqlbinlog to add such statements at the start +of the output, or probably the user could just do it manually with no need for +additional options for mysqlbinlog. + +It might be useful to integrate this with the code that already handles +--replicate-ignore-db and similar slave options. + -=-=(Psergey - Mon, 10 Aug 2009, 15:41)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.12989 2009-08-10 15:41:23.000000000 +0300 +++ /tmp/wklog.40.new.12989 2009-08-10 15:41:23.000000000 +0300 @@ -1,6 +1,7 @@ - 1. Context ---------- +(See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global +overview) At the moment, the server has these replication slave options: --replicate-do-table=db.tbl -=-=(Guest - Mon, 10 Aug 2009, 14:52)=-=- Dependency created: 39 now depends on 40 -=-=(Guest - Mon, 10 Aug 2009, 14:51)=-=- High Level Description modified. --- /tmp/wklog.40.old.16985 2009-08-10 14:51:59.000000000 +0300 +++ /tmp/wklog.40.new.16985 2009-08-10 14:51:59.000000000 +0300 @@ -1,3 +1,4 @@ Replication slave can be set to filter updates to certain tables with ---replicate-[wild-]{do,ignore}-table options. This task is about adding similar -functionality to mysqlbinlog. +--replicate-[wild-]{do,ignore}-table options. + +This task is about adding similar functionality to mysqlbinlog. ------------------------------------------------------------ -=-=(View All Progress Notes, 11 total)=-=- http://askmonty.org/worklog/index.pl?tid=40&nolimit=1 DESCRIPTION: Replication slave can be set to filter updates to certain tables with --replicate-[wild-]{do,ignore}-table options. This task is about adding similar functionality to mysqlbinlog. HIGH-LEVEL SPECIFICATION: 1. Context ---------- (See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global overview) At the moment, the server has these replication slave options: --replicate-do-table=db.tbl --replicate-ignore-table=db.tbl --replicate-wild-do-table=pattern.pattern --replicate-wild-ignore-table=pattern.pattern They affect both RBR and SBR events. SBR events are checked after the statement has been parsed, the server iterates over list of used tables and checks them againist --replicate instructions. What is interesting is that this scheme still allows to update the ignored table through a VIEW. 2. Table filtering in mysqlbinlog --------------------------------- Per-table filtering of RBR events is easy (as it is relatively easy to extract the name of the table that the event applies to). Per-table filtering of SBR events is hard, as generally it is not apparent which tables the statement refers to. This opens possible options: 2.1 Put the parser into mysqlbinlog ----------------------------------- Once we have a full parser in mysqlbinlog, we'll be able to check which tables are used by a statement, and will allow to show behaviour identical to those that one obtains when using --replicate-* slave options. (It is not clear how much effort is needed to put the parser into mysqlbinlog. Any guesses?) 2.2 Use dumb regexp match ------------------------- Use a really dumb approach. A query is considered to be modifying table X if it matches an expression CREATE TABLE $tablename DROP $tablename UPDATE ...$tablename ... SET // here '...' can't contain the word 'SET' DELETE ...$tablename ... WHERE // same as above ALTER TABLE $tablename .. etc (go get from the grammar) .. The advantage over doing the same in awk is that mysqlbinlog will also process RBR statements, and together with that will provide a working solution for those who are careful with their table names not mixing with string constants and such. (TODO: string constants are of particular concern as they come from [potentially hostile] users, unlike e.g. table aliases which come from [not hostile] developers. Remove also all string constants before attempting to do match?) 2.3 Have the master put annotations ----------------------------------- We could add a master option so that it injects into query a mark that tells which tables the query will affect, e.g. for the query UPDATE t1 LEFT JOIN db3.t2 ON ... WHERE ... the binlog will have /* !mysqlbinlog: updates t1,db3.t2 */ UPDATE t1 LEFT JOIN ... and further processing in mysqlbinlog will be trivial. 2.4 Implement server functionality to ignore certain tables ----------------------------------------------------------- We could add a general facility in the server to ignore certain tables: SET SESSION ignored_tables = "db1.t1,db2.t2"; This would work similar to --replicate-ignore-table, but in a general way not restricted to the slave SQL thread. It would then be trivial for mysqlbinlog to add such statements at the start of the output, or probably the user could just do it manually with no need for additional options for mysqlbinlog. It might be useful to integrate this with the code that already handles --replicate-ignore-db and similar slave options. 2.5 Extend Query Events With Tables Info ---------------------------------------- We could extend query events structure with a tables info - a list of tables which the query refers to: <current query event structure> tables_info_len dbase_len dbase table_len table ... dbase_len dbase table_len table Note. In case of <dbase> = current data base, we can set dbase_len = 0 and dbase = empty because current query event structure already includes current data base name. Note. Possibly it is reasonable also to add a --binlog-with-tables-info option which defines whether tables info must be included to the query events. LOW-LEVEL DESIGN: OPTION: 2.5 Extend Query Events With Tables Info ================================================ 1. Adding --binlog-with-tables-info option ****************************************** GLOBAL, read-only option. When set, Query events are to be written in the extended binary format which contains tables_info. When not set, Query events are to be written in usual format (without any changes). 2. Query event extended binary format ************************************* When --binlog-with-tables-info is set, Query events are writen to binary log in the following (extended) format. Query_log_event binary format --------------------------------- Name Size (bytes) --------------------------------- COMMON HEADER: timestamp 4 type 1 server_id 4 total_size 4 master_position 4 flags 2 --------------------------------- POST HEADER: slave_proxy_id 4 exec_time 4 db_len 1 error_code 2 status_vars_len 2 + query_len 2 (see Note 1) + tables_info_len 2 --------------------------------- BODY: status_vars status_vars_len - db db_len + 1 + db db_len (see Note 2) query query_len + tables_info tables_info binary format --------------------------------- Name Size (bytes) --------------------------------- db_len 1 (see Note 3) db db_len table_name_len 1 table_name table_name_len ... db_len 1 db db_len table_name_len 1 table_name table_name_len NOTES 1. In usual format, Query_log_event doesn't include 'query_len' because it considers the query to extent to the end of the event. 2. For 'db' (current db) the trailing zero is redundant since the length is already known. 3. db_len = 0 means that this is the current db. When reading Query events from binary log, we can recognize its format by its post-header length: in extended case the post-header includes 4 additional bytes. #define QUERY_HEADER_LEN (QUERY_HEADER_MINIMAL_LEN + 4) + #define QUERY_HEADER_LEN_EXT (QUERY_HEADER_LEN + 4) ... #define Q_STATUS_VARS_LEN_OFFSET 11 + #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 + #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 3. Changes in log events ************************ 3.1. Format description event ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes needed here concern setting post-header length for Query events. This setting is done in Format description event constructor which creates the event for writing to binary log: if (binlog_with_tables_info) post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; else post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; This change is to be done only for case binlog_ver = 4. NOTE. The refered above constructor is allowed to be invoked in a client context for creating "artificial" Format description events in case of MySQL < 5.0 (e.g. see mysqlbinlog code). To avoid compilation problems (because of 'binlog_with_tables_info') and taking into account the "MySQL < 5.0" restriction, we have to #ifdef out the above code in following manner: switch (binlog_ver) { case 4: /* MySQL 5.0 and higher */ + #ifndef MYSQL_CLIENT ... + #else + <error> + #endif case 1: case 3: ... } 3.2. Query event ~~~~~~~~~~~~~~~~ Changes needed here include adding tables_info and tables_info_len members (member for query length already exists) and modifying the following function-members: Query_log_event(buf) constructor -------------------------------- [Parses binary format written to the 'buf'] Getting post-header length from the Format description event (passed to the constructor as an argument), define whether buf contains an extended or usual Query event and parse the buf contents accordingly. NOTE. Defining Query event format here should be done with taking into account that this constructor can be called within a Query-derived event with the event_type argument != QUERY_EVENT. Query_log_event(thd) constructor -------------------------------- [Creates the event for binlogging] In case of binlog_with_tables_info = TRUE, set additionally query_len, tables_info_len, and tables_info members (the constructor is to have an additional 'tables_info' argument). write() function ---------------- [Writes the event to binlog] In case of binlog_with_tables_info = TRUE, write additional members (query_len, tables_info_len, and tables_info) to binary log. Also write corresponding whole event length to the common-header. <To be continued> 4. Where to get tables info from? ********************************* 4.1. Case study: CREATE TABLE ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** CREATE TABLE table [SELECT ...] bool mysql_create_table_no_lock( THD *thd, const char *db, const char *table_name, ...) { ... // ------------------------------------- // WL40: To be included in tables_info: // * db, table_name // * thd->lex->query_tables (tables refered to in // the select-part; empty if no select-part) // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } *** CREATE TABLE table LIKE src-table bool mysql_create_like_table( ... TABLE_LIST *table, TABLE_LIST *src_table, ...) { ... if (thd->current_stmt_binlog_row_based) { // RBR: In this case we don't replicate temp tables if (!(create_info->options & HA_LEX_CREATE_TMP_TABLE)) { if (src_table->table->s->tmp_table) { // CREATE normal-table LIKE temp-table: // Generate new query without LIKE-part store_create_info(thd, table, &query, create_info, FALSE); // ------------------------------------- // WL40: To include to tables_info: // * table (src_table is not included) // ------------------------------------- write_bin_log(thd, TRUE, query.ptr(), query.length()); } else { // CREATE normal-table LIKE normal-table // ------------------------------------- // WL40: To include to log_tables_info: // * table // * src_table // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } } // CREATE temp-table LIKE ... // This case is not replicated } else { // SBR: // ------------------------------------- // WL40: To include to tables_info: // * table // * src_table // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } } <To be continued> ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Alexi): Add a mysqlbinlog option to filter updates to certain tables (40)
by worklog-noreply＠askmonty.org 08 Nov '09

08 Nov '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to filter updates to certain tables CREATION DATE..: Mon, 10 Aug 2009, 13:25 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: Psergey CATEGORY.......: Server-RawIdeaBin TASK ID........: 40 (http://askmonty.org/worklog/?tid=40) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 2 ESTIMATE.......: 48 (hours remain) ORIG. ESTIMATE.: 48 PROGRESS NOTES: -=-=(Alexi - Sun, 08 Nov 2009, 10:40)=-=- Low Level Design modified. --- /tmp/wklog.40.old.5055 2009-11-08 08:40:02.000000000 +0000 +++ /tmp/wklog.40.new.5055 2009-11-08 08:40:02.000000000 +0000 @@ -3,6 +3,7 @@ 1. Adding --binlog-with-tables-info option ****************************************** +GLOBAL, read-only option. When set, Query events are to be written in the extended binary format which contains tables_info. When not set, Query events -=-=(Alexi - Thu, 05 Nov 2009, 12:37)=-=- Low Level Design modified. --- /tmp/wklog.40.old.11441 2009-11-05 12:37:16.000000000 +0200 +++ /tmp/wklog.40.new.11441 2009-11-05 12:37:16.000000000 +0200 @@ -1,9 +1,18 @@ OPTION: 2.5 Extend Query Events With Tables Info ================================================ -1. Query_log_event Binary Format -******************************** -Changes to be done: +1. Adding --binlog-with-tables-info option +****************************************** + +When set, Query events are to be written in the extended binary +format which contains tables_info. When not set, Query events +are to be written in usual format (without any changes). + +2. Query event extended binary format +************************************* + +When --binlog-with-tables-info is set, Query events are writen +to binary log in the following (extended) format. Query_log_event binary format --------------------------------- @@ -24,12 +33,12 @@ error_code 2 status_vars_len 2 + query_len 2 (see Note 1) -+ tables_info_len 2 (see Note 2) ++ tables_info_len 2 --------------------------------- BODY: status_vars status_vars_len - db db_len + 1 -+ db db_len (see Note 3) ++ db db_len (see Note 2) query query_len + tables_info @@ -37,7 +46,7 @@ --------------------------------- Name Size (bytes) --------------------------------- - db_len 1 (see Note 4) + db_len 1 (see Note 3) db db_len table_name_len 1 table_name table_name_len @@ -48,19 +57,99 @@ table_name table_name_len NOTES -1. Currently Query_log_event format doesn't include 'query_len' because +1. In usual format, Query_log_event doesn't include 'query_len' because it considers the query to extent to the end of the event. -2. If tables_info is not included in the event (--binlog-with-tables-info - option), tables_info_len = 0. -3. The trailing zero is redundant since the length is already known. -4. In case of db = current db, db_len = 0 and db = empty, because - current db is already included in the current event format. +2. For 'db' (current db) the trailing zero is redundant since the length + is already known. +3. db_len = 0 means that this is the current db. + +When reading Query events from binary log, we can recognize its format +by its post-header length: in extended case the post-header includes 4 +additional bytes. + + #define QUERY_HEADER_LEN (QUERY_HEADER_MINIMAL_LEN + 4) ++ #define QUERY_HEADER_LEN_EXT (QUERY_HEADER_LEN + 4) + ... + #define Q_STATUS_VARS_LEN_OFFSET 11 ++ #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 ++ #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 + +3. Changes in log events +************************ + +3.1. Format description event +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Changes needed here concern setting post-header length for Query events. +This setting is done in Format description event constructor which creates +the event for writing to binary log: + + if (binlog_with_tables_info) + post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; + else + post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; + +This change is to be done only for case binlog_ver = 4. + +NOTE. The refered above constructor is allowed to be invoked in a client +context for creating "artificial" Format description events in case of +MySQL < 5.0 (e.g. see mysqlbinlog code). To avoid compilation problems +(because of 'binlog_with_tables_info') and taking into account the +"MySQL < 5.0" restriction, we have to #ifdef out the above code in +following manner: + + switch (binlog_ver) { + case 4: /* MySQL 5.0 and higher */ ++ #ifndef MYSQL_CLIENT + ... ++ #else ++ <error> ++ #endif + case 1: + case 3: + ... + } + +3.2. Query event +~~~~~~~~~~~~~~~~ +Changes needed here include adding tables_info and tables_info_len +members (member for query length already exists) and modifying the +following function-members: + +Query_log_event(buf) constructor +-------------------------------- +[Parses binary format written to the 'buf'] + +Getting post-header length from the Format description event (passed +to the constructor as an argument), define whether buf contains an +extended or usual Query event and parse the buf contents accordingly. + +NOTE. Defining Query event format here should be done with taking into +account that this constructor can be called within a Query-derived +event with the event_type argument != QUERY_EVENT. + +Query_log_event(thd) constructor +-------------------------------- +[Creates the event for binlogging] + +In case of binlog_with_tables_info = TRUE, set additionally query_len, +tables_info_len, and tables_info members (the constructor is to have +an additional 'tables_info' argument). + +write() function +---------------- +[Writes the event to binlog] + +In case of binlog_with_tables_info = TRUE, write additional members +(query_len, tables_info_len, and tables_info) to binary log. Also +write corresponding whole event length to the common-header. + +<To be continued> -2. Where to get tables info from? +4. Where to get tables info from? ********************************* -2.1. Case study: CREATE TABLE -****************************** +4.1. Case study: CREATE TABLE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** CREATE TABLE table [SELECT ...] @@ -129,4 +218,4 @@ } } -To be continued +<To be continued> -=-=(Alexi - Wed, 04 Nov 2009, 10:21)=-=- Low Level Design modified. --- /tmp/wklog.40.old.6734 2009-11-04 10:21:20.000000000 +0200 +++ /tmp/wklog.40.new.6734 2009-11-04 10:21:20.000000000 +0200 @@ -21,9 +21,9 @@ slave_proxy_id 4 exec_time 4 db_len 1 -+ query_len 2 (see Note 1) error_code 2 status_vars_len 2 ++ query_len 2 (see Note 1) + tables_info_len 2 (see Note 2) --------------------------------- BODY: -=-=(Alexi - Tue, 03 Nov 2009, 11:19)=-=- Low Level Design modified. --- /tmp/wklog.40.old.7187 2009-11-03 11:19:22.000000000 +0200 +++ /tmp/wklog.40.new.7187 2009-11-03 11:19:22.000000000 +0200 @@ -1 +1,132 @@ +OPTION: 2.5 Extend Query Events With Tables Info +================================================ +1. Query_log_event Binary Format +******************************** +Changes to be done: + + Query_log_event binary format + --------------------------------- + Name Size (bytes) + --------------------------------- + COMMON HEADER: + timestamp 4 + type 1 + server_id 4 + total_size 4 + master_position 4 + flags 2 + --------------------------------- + POST HEADER: + slave_proxy_id 4 + exec_time 4 + db_len 1 ++ query_len 2 (see Note 1) + error_code 2 + status_vars_len 2 ++ tables_info_len 2 (see Note 2) + --------------------------------- + BODY: + status_vars status_vars_len +- db db_len + 1 ++ db db_len (see Note 3) + query query_len ++ tables_info + + tables_info binary format + --------------------------------- + Name Size (bytes) + --------------------------------- + db_len 1 (see Note 4) + db db_len + table_name_len 1 + table_name table_name_len + ... + db_len 1 + db db_len + table_name_len 1 + table_name table_name_len + +NOTES +1. Currently Query_log_event format doesn't include 'query_len' because + it considers the query to extent to the end of the event. +2. If tables_info is not included in the event (--binlog-with-tables-info + option), tables_info_len = 0. +3. The trailing zero is redundant since the length is already known. +4. In case of db = current db, db_len = 0 and db = empty, because + current db is already included in the current event format. + +2. Where to get tables info from? +********************************* + +2.1. Case study: CREATE TABLE +****************************** + +*** CREATE TABLE table [SELECT ...] + + bool mysql_create_table_no_lock( + THD *thd, + const char *db, + const char *table_name, ...) + { + ... + // ------------------------------------- + // WL40: To be included in tables_info: + // * db, table_name + // * thd->lex->query_tables (tables refered to in + // the select-part; empty if no select-part) + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + +*** CREATE TABLE table LIKE src-table + + bool mysql_create_like_table( + ... + TABLE_LIST *table, + TABLE_LIST *src_table, + ...) + { + ... + if (thd->current_stmt_binlog_row_based) + { // RBR: In this case we don't replicate temp tables + if (!(create_info->options & HA_LEX_CREATE_TMP_TABLE)) + { + if (src_table->table->s->tmp_table) + { // CREATE normal-table LIKE temp-table: + + // Generate new query without LIKE-part + store_create_info(thd, table, &query, create_info, FALSE); + + // ------------------------------------- + // WL40: To include to tables_info: + // * table (src_table is not included) + // ------------------------------------- + write_bin_log(thd, TRUE, query.ptr(), query.length()); + } + else + { // CREATE normal-table LIKE normal-table + + // ------------------------------------- + // WL40: To include to log_tables_info: + // * table + // * src_table + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + } + // CREATE temp-table LIKE ... + // This case is not replicated + } + else + { // SBR: + // ------------------------------------- + // WL40: To include to tables_info: + // * table + // * src_table + // ------------------------------------- + write_bin_log(thd, TRUE, thd->query, thd->query_length); + } + } + +To be continued -=-=(Alexi - Mon, 02 Nov 2009, 11:34)=-=- Worked 2 hours on option 2.5 Worked 2 hours and estimate 48 hours remain (original estimate increased by 50 hours). -=-=(Alexi - Mon, 02 Nov 2009, 11:20)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.4848 2009-11-02 11:20:24.000000000 +0200 +++ /tmp/wklog.40.new.4848 2009-11-02 11:20:24.000000000 +0200 @@ -90,3 +90,25 @@ It might be useful to integrate this with the code that already handles --replicate-ignore-db and similar slave options. +2.5 Extend Query Events With Tables Info +---------------------------------------- + +We could extend query events structure with a tables info - a list of tables +which the query refers to: + + <current query event structure> + tables_info_len + dbase_len dbase + table_len table + ... + dbase_len dbase + table_len table + +Note. In case of <dbase> = current data base, we can set dbase_len = 0 + and dbase = empty because current query event structure already + includes current data base name. + +Note. Possibly it is reasonable also to add a --binlog-with-tables-info + option which defines whether tables info must be included to the + query events. + -=-=(Knielsen - Fri, 14 Aug 2009, 15:47)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.10896 2009-08-14 15:47:39.000000000 +0300 +++ /tmp/wklog.40.new.10896 2009-08-14 15:47:39.000000000 +0300 @@ -72,3 +72,21 @@ /* !mysqlbinlog: updates t1,db3.t2 */ UPDATE t1 LEFT JOIN ... and further processing in mysqlbinlog will be trivial. + +2.4 Implement server functionality to ignore certain tables +----------------------------------------------------------- + +We could add a general facility in the server to ignore certain tables: + + SET SESSION ignored_tables = "db1.t1,db2.t2"; + +This would work similar to --replicate-ignore-table, but in a general way not +restricted to the slave SQL thread. + +It would then be trivial for mysqlbinlog to add such statements at the start +of the output, or probably the user could just do it manually with no need for +additional options for mysqlbinlog. + +It might be useful to integrate this with the code that already handles +--replicate-ignore-db and similar slave options. + -=-=(Psergey - Mon, 10 Aug 2009, 15:41)=-=- High-Level Specification modified. --- /tmp/wklog.40.old.12989 2009-08-10 15:41:23.000000000 +0300 +++ /tmp/wklog.40.new.12989 2009-08-10 15:41:23.000000000 +0300 @@ -1,6 +1,7 @@ - 1. Context ---------- +(See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global +overview) At the moment, the server has these replication slave options: --replicate-do-table=db.tbl -=-=(Guest - Mon, 10 Aug 2009, 14:52)=-=- Dependency created: 39 now depends on 40 -=-=(Guest - Mon, 10 Aug 2009, 14:51)=-=- High Level Description modified. --- /tmp/wklog.40.old.16985 2009-08-10 14:51:59.000000000 +0300 +++ /tmp/wklog.40.new.16985 2009-08-10 14:51:59.000000000 +0300 @@ -1,3 +1,4 @@ Replication slave can be set to filter updates to certain tables with ---replicate-[wild-]{do,ignore}-table options. This task is about adding similar -functionality to mysqlbinlog. +--replicate-[wild-]{do,ignore}-table options. + +This task is about adding similar functionality to mysqlbinlog. ------------------------------------------------------------ -=-=(View All Progress Notes, 11 total)=-=- http://askmonty.org/worklog/index.pl?tid=40&nolimit=1 DESCRIPTION: Replication slave can be set to filter updates to certain tables with --replicate-[wild-]{do,ignore}-table options. This task is about adding similar functionality to mysqlbinlog. HIGH-LEVEL SPECIFICATION: 1. Context ---------- (See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global overview) At the moment, the server has these replication slave options: --replicate-do-table=db.tbl --replicate-ignore-table=db.tbl --replicate-wild-do-table=pattern.pattern --replicate-wild-ignore-table=pattern.pattern They affect both RBR and SBR events. SBR events are checked after the statement has been parsed, the server iterates over list of used tables and checks them againist --replicate instructions. What is interesting is that this scheme still allows to update the ignored table through a VIEW. 2. Table filtering in mysqlbinlog --------------------------------- Per-table filtering of RBR events is easy (as it is relatively easy to extract the name of the table that the event applies to). Per-table filtering of SBR events is hard, as generally it is not apparent which tables the statement refers to. This opens possible options: 2.1 Put the parser into mysqlbinlog ----------------------------------- Once we have a full parser in mysqlbinlog, we'll be able to check which tables are used by a statement, and will allow to show behaviour identical to those that one obtains when using --replicate-* slave options. (It is not clear how much effort is needed to put the parser into mysqlbinlog. Any guesses?) 2.2 Use dumb regexp match ------------------------- Use a really dumb approach. A query is considered to be modifying table X if it matches an expression CREATE TABLE $tablename DROP $tablename UPDATE ...$tablename ... SET // here '...' can't contain the word 'SET' DELETE ...$tablename ... WHERE // same as above ALTER TABLE $tablename .. etc (go get from the grammar) .. The advantage over doing the same in awk is that mysqlbinlog will also process RBR statements, and together with that will provide a working solution for those who are careful with their table names not mixing with string constants and such. (TODO: string constants are of particular concern as they come from [potentially hostile] users, unlike e.g. table aliases which come from [not hostile] developers. Remove also all string constants before attempting to do match?) 2.3 Have the master put annotations ----------------------------------- We could add a master option so that it injects into query a mark that tells which tables the query will affect, e.g. for the query UPDATE t1 LEFT JOIN db3.t2 ON ... WHERE ... the binlog will have /* !mysqlbinlog: updates t1,db3.t2 */ UPDATE t1 LEFT JOIN ... and further processing in mysqlbinlog will be trivial. 2.4 Implement server functionality to ignore certain tables ----------------------------------------------------------- We could add a general facility in the server to ignore certain tables: SET SESSION ignored_tables = "db1.t1,db2.t2"; This would work similar to --replicate-ignore-table, but in a general way not restricted to the slave SQL thread. It would then be trivial for mysqlbinlog to add such statements at the start of the output, or probably the user could just do it manually with no need for additional options for mysqlbinlog. It might be useful to integrate this with the code that already handles --replicate-ignore-db and similar slave options. 2.5 Extend Query Events With Tables Info ---------------------------------------- We could extend query events structure with a tables info - a list of tables which the query refers to: <current query event structure> tables_info_len dbase_len dbase table_len table ... dbase_len dbase table_len table Note. In case of <dbase> = current data base, we can set dbase_len = 0 and dbase = empty because current query event structure already includes current data base name. Note. Possibly it is reasonable also to add a --binlog-with-tables-info option which defines whether tables info must be included to the query events. LOW-LEVEL DESIGN: OPTION: 2.5 Extend Query Events With Tables Info ================================================ 1. Adding --binlog-with-tables-info option ****************************************** GLOBAL, read-only option. When set, Query events are to be written in the extended binary format which contains tables_info. When not set, Query events are to be written in usual format (without any changes). 2. Query event extended binary format ************************************* When --binlog-with-tables-info is set, Query events are writen to binary log in the following (extended) format. Query_log_event binary format --------------------------------- Name Size (bytes) --------------------------------- COMMON HEADER: timestamp 4 type 1 server_id 4 total_size 4 master_position 4 flags 2 --------------------------------- POST HEADER: slave_proxy_id 4 exec_time 4 db_len 1 error_code 2 status_vars_len 2 + query_len 2 (see Note 1) + tables_info_len 2 --------------------------------- BODY: status_vars status_vars_len - db db_len + 1 + db db_len (see Note 2) query query_len + tables_info tables_info binary format --------------------------------- Name Size (bytes) --------------------------------- db_len 1 (see Note 3) db db_len table_name_len 1 table_name table_name_len ... db_len 1 db db_len table_name_len 1 table_name table_name_len NOTES 1. In usual format, Query_log_event doesn't include 'query_len' because it considers the query to extent to the end of the event. 2. For 'db' (current db) the trailing zero is redundant since the length is already known. 3. db_len = 0 means that this is the current db. When reading Query events from binary log, we can recognize its format by its post-header length: in extended case the post-header includes 4 additional bytes. #define QUERY_HEADER_LEN (QUERY_HEADER_MINIMAL_LEN + 4) + #define QUERY_HEADER_LEN_EXT (QUERY_HEADER_LEN + 4) ... #define Q_STATUS_VARS_LEN_OFFSET 11 + #define Q_QUERY_LEN_OFFSET Q_STATUS_VARS_LEN_OFFSET + 2 + #define Q_QUERY_TABLES_INFO_LEN_OFFSET Q_QUERY_LEN_OFFSET + 2 3. Changes in log events ************************ 3.1. Format description event ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes needed here concern setting post-header length for Query events. This setting is done in Format description event constructor which creates the event for writing to binary log: if (binlog_with_tables_info) post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN_EXT; else post_header_len[QUERY_EVENT - 1] = QUERY_HEADER_LEN; This change is to be done only for case binlog_ver = 4. NOTE. The refered above constructor is allowed to be invoked in a client context for creating "artificial" Format description events in case of MySQL < 5.0 (e.g. see mysqlbinlog code). To avoid compilation problems (because of 'binlog_with_tables_info') and taking into account the "MySQL < 5.0" restriction, we have to #ifdef out the above code in following manner: switch (binlog_ver) { case 4: /* MySQL 5.0 and higher */ + #ifndef MYSQL_CLIENT ... + #else + <error> + #endif case 1: case 3: ... } 3.2. Query event ~~~~~~~~~~~~~~~~ Changes needed here include adding tables_info and tables_info_len members (member for query length already exists) and modifying the following function-members: Query_log_event(buf) constructor -------------------------------- [Parses binary format written to the 'buf'] Getting post-header length from the Format description event (passed to the constructor as an argument), define whether buf contains an extended or usual Query event and parse the buf contents accordingly. NOTE. Defining Query event format here should be done with taking into account that this constructor can be called within a Query-derived event with the event_type argument != QUERY_EVENT. Query_log_event(thd) constructor -------------------------------- [Creates the event for binlogging] In case of binlog_with_tables_info = TRUE, set additionally query_len, tables_info_len, and tables_info members (the constructor is to have an additional 'tables_info' argument). write() function ---------------- [Writes the event to binlog] In case of binlog_with_tables_info = TRUE, write additional members (query_len, tables_info_len, and tables_info) to binary log. Also write corresponding whole event length to the common-header. <To be continued> 4. Where to get tables info from? ********************************* 4.1. Case study: CREATE TABLE ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *** CREATE TABLE table [SELECT ...] bool mysql_create_table_no_lock( THD *thd, const char *db, const char *table_name, ...) { ... // ------------------------------------- // WL40: To be included in tables_info: // * db, table_name // * thd->lex->query_tables (tables refered to in // the select-part; empty if no select-part) // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } *** CREATE TABLE table LIKE src-table bool mysql_create_like_table( ... TABLE_LIST *table, TABLE_LIST *src_table, ...) { ... if (thd->current_stmt_binlog_row_based) { // RBR: In this case we don't replicate temp tables if (!(create_info->options & HA_LEX_CREATE_TMP_TABLE)) { if (src_table->table->s->tmp_table) { // CREATE normal-table LIKE temp-table: // Generate new query without LIKE-part store_create_info(thd, table, &query, create_info, FALSE); // ------------------------------------- // WL40: To include to tables_info: // * table (src_table is not included) // ------------------------------------- write_bin_log(thd, TRUE, query.ptr(), query.length()); } else { // CREATE normal-table LIKE normal-table // ------------------------------------- // WL40: To include to log_tables_info: // * table // * src_table // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } } // CREATE temp-table LIKE ... // This case is not replicated } else { // SBR: // ------------------------------------- // WL40: To include to tables_info: // * table // * src_table // ------------------------------------- write_bin_log(thd, TRUE, thd->query, thd->query_length); } } <To be continued> ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Guest): Add a mysqlbinlog option to change the used database (36)
by worklog-noreply＠askmonty.org 07 Nov '09

07 Nov '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to change the used database CREATION DATE..: Fri, 07 Aug 2009, 14:57 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-Sprint TASK ID........: 36 (http://askmonty.org/worklog/?tid=36) VERSION........: Server-9.x STATUS.........: Complete PRIORITY.......: 60 WORKED HOURS...: 49 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Guest - Sat, 07 Nov 2009, 22:43)=-=- Category updated. --- /tmp/wklog.36.old.9112 2009-11-07 22:43:50.000000000 +0200 +++ /tmp/wklog.36.new.9112 2009-11-07 22:43:50.000000000 +0200 @@ -1 +1 @@ -Server-RawIdeaBin +Server-Sprint -=-=(Guest - Sat, 07 Nov 2009, 22:43)=-=- Status updated. --- /tmp/wklog.36.old.9112 2009-11-07 22:43:50.000000000 +0200 +++ /tmp/wklog.36.new.9112 2009-11-07 22:43:50.000000000 +0200 @@ -1 +1 @@ -Un-Assigned +Complete -=-=(Bothorsen - Tue, 03 Nov 2009, 13:49)=-=- More cleanup work done by Alexi, Bo and Sergey. Worked 4 hours and estimate 0 hours remain (original estimate increased by 4 hours). -=-=(Bothorsen - Tue, 03 Nov 2009, 13:49)=-=- Sergey and Bo has been working on getting the patch ready, and Alexi has fixed some issues with the patch. Worked 15 hours and estimate 0 hours remain (original estimate increased by 15 hours). -=-=(Bothorsen - Tue, 03 Nov 2009, 13:47)=-=- Alexi has implemented a patch for this item. Worked 30 hours and estimate 0 hours remain (original estimate increased by 30 hours). -=-=(Guest - Tue, 15 Sep 2009, 18:04)=-=- Low Level Design modified. --- /tmp/wklog.36.old.19322 2009-09-15 18:04:49.000000000 +0300 +++ /tmp/wklog.36.new.19322 2009-09-15 18:04:49.000000000 +0300 @@ -191,7 +191,7 @@ - In process_event() function add switch case for Load_log_event and add print_use_stmt() invocations where needed (according to the - events lis above), e.g.: + events list above), e.g.: Exit_status process_event( PRINT_EVENT_INFO *print_event_info, -=-=(Guest - Tue, 15 Sep 2009, 15:53)=-=- Low Level Design modified. --- /tmp/wklog.36.old.13421 2009-09-15 15:53:31.000000000 +0300 +++ /tmp/wklog.36.new.13421 2009-09-15 15:53:31.000000000 +0300 @@ -150,10 +150,17 @@ following events (see process_event() function): - Query_log_event -- Execute_load_query_log_event -- Create_file_log_event - -TODO. Needed to check this list requires carefully !!! +- Load_log_event +- Execute_load_query_log_event [ :public Query_log_event ] +- Create_file_log_event [ :public Load_log_event ] + +TODO. Needed to check this list carefully (not sure for Create_file_log_event) + Notes. + - In replication, only Query_log_event and Load_log_event uses + rpl_filter->get_rewrite_db(); + - In mysqlbinlog (process_event), Execute_load_query_log_event + and Create_file_log_event are processed in separate switch + cases. And Load_log_event is processed in the default switch case. Conditions for emiting use-statement: - LOG_EVENT_SUPPRESS_USE_F is OFF for the event @@ -182,8 +189,9 @@ */ } -- In process_event() function add print_use_stmt() invocations where - needed (according to the events lis above), e.g.: +- In process_event() function add switch case for Load_log_event and + add print_use_stmt() invocations where needed (according to the + events lis above), e.g.: Exit_status process_event( PRINT_EVENT_INFO *print_event_info, @@ -207,6 +215,11 @@ } break; ... + case LOAD_EVENT: + print_use_stmt((Load_log_event*)ev, print_event_info); + break; + default: + ... } ... } -=-=(Guest - Tue, 15 Sep 2009, 12:12)=-=- Low Level Design modified. --- /tmp/wklog.36.old.3961 2009-09-15 12:12:26.000000000 +0300 +++ /tmp/wklog.36.new.3961 2009-09-15 12:12:26.000000000 +0300 @@ -144,6 +144,8 @@ 3. Supporting rewrite-db for SBR events --------------------------------------- +Limited to emiting USE <db_to> instead of USE <db_from>. + USE statements can be emited by mysqlbinlog as a result of processing the following events (see process_event() function): -=-=(Guest - Tue, 15 Sep 2009, 12:08)=-=- Low Level Design modified. --- /tmp/wklog.36.old.3794 2009-09-15 12:08:54.000000000 +0300 +++ /tmp/wklog.36.new.3794 2009-09-15 12:08:54.000000000 +0300 @@ -1 +1,229 @@ +Content +------- +1. Adding rewrite-db option +2. Supporting rewrite-db option for RBR events +3. Supporting rewrite-db option for SBR events + (Limited to affecting only USE statements) +4. Current status + +1. Adding rewrite-db option +--------------------------- + +1.1. Syntax: + --rewrite-db='db_from->db_to' + +1.2. Add 'OPT_REWRITE_DB' to 'options_client' (in client_priv.h). + +1.3. In mysqlbinlog.cc: + +- Add { "rewrite-db", OPT_REWRITE_DB, ...} record to my_long_options: +- Add Rpl_filter object to mysqlbinlog.cc + + Rpl_filter* binlog_filter; + +- Add corresponding switch case to get_one_option(): + + case OPT_REWRITE_DB: + <extract db-from and db-to strings> + binlog_filter->add_db_rewrite(db_from, db_to); + break; + . +Note. To make Rpl_filter usable in a MYSQL_CLIENT context, few small +additional changes are required: + +- In sql_list.cc/h, Sql_alloc::new(size_t) and Sql_alloc::new[](size_t) + uses sql_alloc() which is THD dependent. These are to be modified + as follows: + + #ifdef MYSQL_CLIENT + extern MEM_ROOT sql_list_client_mem_root; // defined in sql_list.cc + #endif + + class Sql_alloc + { ... + static void *operator new(size_t size) throw () + { + #ifndef MYSQL_CLIENT + return sql_alloc(size); + #else + return alloc_root(&sql_list_client_mem_root, size); + #endif + } + static void *operator new[](size_t size) throw () + { + #ifndef MYSQL_CLIENT + return sql_alloc(size); + #else + return alloc_root(&sql_list_client_mem_root, size); + #endif + } + ... + } + +- In rpl_filter.cc: + + Rpl_filter::Rpl_filter() : + ... + { + #ifdef MYSQL_CLIENT + init_alloc_root(&sql_list_client_mem_root, ...); + #endif + ... + } + + Rpl_filter::~Rpl_filter() + { ... + #ifdef MYSQL_CLIENT + free_root(&sql_list_client_mem_root, ...); + #endif + } + +2. Supporting rewrite-db for RBR events +--------------------------------------- + +In binlog, each row operation event is preceded by Table map event(s) which maps +table id(s) to database and table names. So, it's enough to support rewriting +database name in a Table map. + +2.1. Add rewrite_db() member to Table_map_log_event: + + int Table_map_log_event::rewrite_db( + const char* new_db, + size_t new_db_len, + const Format_description_log_event* desc) + { + /* 1. In temp_buf member (possibly reallocating it) rewrite + event length, db length, and db parts + 2. Change m_dblen and m_dbnam members + */ + } + +Comment. This function assumes that temp_buf member contains Table map +binlog representaion (temp_buf is used for creating corresponding +BINLOG statement). + +2.2. In mysqlbinlog modify corresponding switch case in the +process_event() function: + + Exit_status process_event( + PRINT_EVENT_INFO *print_event_info, + Log_event *ev, ...) + { + ... + switch (ev_type) { + ... + case TABLE_MAP_EVENT: + { + Table_map_log_event *map= ((Table_map_log_event *)ev); + if (shall_skip_database(map->get_db_name())) + { ... + } + // WL36 + size_t new_len= 0; + const char* new_db= binlog_filter->get_rewrite_db( + map->get_db_name(), &new_len); + if (new_len && map->rewrite_db(new_db, new_len, + glob_description_event)) + { error("Could not rewrite database name"); + goto err; + } + } + case WRITE_ROWS_EVENT: + case DELETE_ROWS_EVENT: + case UPDATE_ROWS_EVENT: + ... + } + ... + } + +Comment. Rpl_filter::get_rewrite_db(db_from, &len): if filter contains +a (db_from, db_to) pair, this function returns pointer to db_to and +sets len = db_to length; otherwise, it returns db_from and does not +change len value. + +3. Supporting rewrite-db for SBR events +--------------------------------------- + +USE statements can be emited by mysqlbinlog as a result of processing the +following events (see process_event() function): + +- Query_log_event +- Execute_load_query_log_event +- Create_file_log_event + +TODO. Needed to check this list requires carefully !!! + +Conditions for emiting use-statement: +- LOG_EVENT_SUPPRESS_USE_F is OFF for the event + (e.g. it is ON for 'create database' statement) +- event's db name differs from db_name in PRINT_EVENT_INFO + (PRINT_EVENT_INFO keeps db name of the last issued USE statement; + initially, this db name is empty). + +3.1. In mysqlbinlog.cc + +- Add the following function: + + void print_use_stmt(Log_event* event, PRINT_EVENT_INFO* pinfo) + { + if (event->flags & LOG_EVENT_SUPPRESS_USE_F) + return; + /* + - For events listed above get db_from = event->db; + - If db_from is the same as pinfo->db then return; + - If there is rewrite-db rule db_from->db_to, + set db = db_to. Else set db = db_from; + - Print "use <db>" to mysqlbinlog output + - Set pinfo->db = db_from + (this suppresses emiting use-statements by corresponding + log_event's print-function) + */ + } + +- In process_event() function add print_use_stmt() invocations where + needed (according to the events lis above), e.g.: + + Exit_status process_event( + PRINT_EVENT_INFO *print_event_info, + Log_event *ev, ...) + { + ... + switch (ev_type) { + case QUERY_EVENT: + if (shall_skip_database(((Query_log_event*)ev)->db)) + goto end; + if (opt_base64_output_mode == BASE64_OUTPUT_ALWAYS) + { + // Possibly in case of rewite-db rule for ev->db + // a warning should be emited here (see note below) + ... write_event_header_and_base64(ev, ...) ... + } + else + { + print_use_stmt((Query_log_event*)ev, print_event_info); + ev->print(result_file, print_event_info); + } + break; + ... + } + ... + } + +Note. write_event_header_and_base64() does not print use-statement. It +produces BINLOG statement using ev->temp_buf content (i.e. the binary +log representation of the event). We don't rewrite temp_buf here with +db_to name (as we do it for Table map event) - this implies the +limitation 3 mentioned above. +Question: Is supporting of rewite_db + --base64-output really needed +currently? + +4. Current status +----------------- + +The outlined design (implemented for mysql-5.1.37) is tested for +simple test-cases. + +TODO. 1. Check list of events which can emit use-statement. + 2. Supporting of rewite_db + --base64-output ? + -=-=(Guest - Mon, 14 Sep 2009, 11:51)=-=- Low Level Design modified. --- /tmp/wklog.36.old.9711 2009-09-14 11:51:43.000000000 +0300 +++ /tmp/wklog.36.new.9711 2009-09-14 11:51:43.000000000 +0300 @@ -1 +1 @@ -Pay no attention: just check for having access + ------------------------------------------------------------ -=-=(View All Progress Notes, 18 total)=-=- http://askmonty.org/worklog/index.pl?tid=36&nolimit=1 DESCRIPTION: Sometimes there is a need to take a binary log and apply it to a database with a different name than the original name of the database on binlog producer. If one is using statement-based replication, he can achieve this by grepping out "USE dbname" statements out of the output of mysqlbinlog(*). With row-based replication this is no longer possible, as database name is encoded within the the BINLOG '....' statement. This task is about adding an option to mysqlbinlog that would allow to change the names of used databases in both RBR and SBR events. (*) this implies that all statements refer to tables in the current database, doesn't catch updates made inside stored functions and so forth, but still works for a practially-important subset of cases. HIGH-LEVEL SPECIFICATION: Context ------- (See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global overview) At the moment, the server has a replication slave option --replicate-rewrite-db="from->to" the option affects - Table_map_log_event (all RBR events) - Load_log_event (LOAD DATA) - Query_log_event (SBR-based updates, with the usual assumption that the statement refers to tables in current database, so that changing the current database will make the statement to work on a table in a different database). See also MySQL BUG#42941. Note this bug is fixed in MySQL 5.1.37, which is not merged into MariaDB at the time of writing, but planned to be merged before release. What we could do ---------------- Option1: make mysqlbinlog accept --replicate-rewrite-db option ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Make mysqlbinlog accept --replicate-rewrite-db options and process them to the same extent as replication slave would process --replicate-rewrite-db option. Option2: Add database-agnostic RBR events and --strip-db option ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Right now RBR events require a databasename. It is not possible to have RBR event stream that won't mention which database the events are for. When I tried to use debugger and specify empty database name, attempt to apply the binlog resulted in this error: 090809 17:38:44 [ERROR] Slave SQL: Error 'Table '.tablename' doesn't exist' on opening tables, We could do as follows: - Make the server interpret empty database name in RBR event (i.e. in a Table_map_log_event) as "use current database". Binlog slave thread probably should not allow such events as it doesn't have a natural current database. - Add a mysqlbinlog --strip-db option that would = not produce any "USE dbname" statements = change databasename for all RBR events to be empty That way, mysqlbinlog output will be database-agnostic and apply to the current database. (this will have the usual limitations that we assume that all statements in the binlog refer to the current database). Option3: Enhance database rewrite ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If there is a need to support database change for statements that use dbname.tablename notation and are replicated as statements (i.e. are DDL statements and/or DML statements that are binlogged as statements), then that could be supported as follows: - Make the server's parser recognize special form of comments /* !database-alias(oldname,newname) */ and save the mapping somewhere - Put the hooks in table open and name resolution code to use the saved mapping. Once we've done the above, it will be easy to perform a complete, no-compromise or restrictions database name change in binary log. It will be possible to do the rewrites either on the slave ( --replicate-rewrite-db will work for all kinds of statements), or in mysqlbinlog (adding a comment is easy and doesn't require mysqlbinlog to parse the statement). LOW-LEVEL DESIGN: Content ------- 1. Adding rewrite-db option 2. Supporting rewrite-db option for RBR events 3. Supporting rewrite-db option for SBR events (Limited to affecting only USE statements) 4. Current status 1. Adding rewrite-db option --------------------------- 1.1. Syntax: --rewrite-db='db_from->db_to' 1.2. Add 'OPT_REWRITE_DB' to 'options_client' (in client_priv.h). 1.3. In mysqlbinlog.cc: - Add { "rewrite-db", OPT_REWRITE_DB, ...} record to my_long_options: - Add Rpl_filter object to mysqlbinlog.cc Rpl_filter* binlog_filter; - Add corresponding switch case to get_one_option(): case OPT_REWRITE_DB: <extract db-from and db-to strings> binlog_filter->add_db_rewrite(db_from, db_to); break; . Note. To make Rpl_filter usable in a MYSQL_CLIENT context, few small additional changes are required: - In sql_list.cc/h, Sql_alloc::new(size_t) and Sql_alloc::new[](size_t) uses sql_alloc() which is THD dependent. These are to be modified as follows: #ifdef MYSQL_CLIENT extern MEM_ROOT sql_list_client_mem_root; // defined in sql_list.cc #endif class Sql_alloc { ... static void *operator new(size_t size) throw () { #ifndef MYSQL_CLIENT return sql_alloc(size); #else return alloc_root(&sql_list_client_mem_root, size); #endif } static void *operator new[](size_t size) throw () { #ifndef MYSQL_CLIENT return sql_alloc(size); #else return alloc_root(&sql_list_client_mem_root, size); #endif } ... } - In rpl_filter.cc: Rpl_filter::Rpl_filter() : ... { #ifdef MYSQL_CLIENT init_alloc_root(&sql_list_client_mem_root, ...); #endif ... } Rpl_filter::~Rpl_filter() { ... #ifdef MYSQL_CLIENT free_root(&sql_list_client_mem_root, ...); #endif } 2. Supporting rewrite-db for RBR events --------------------------------------- In binlog, each row operation event is preceded by Table map event(s) which maps table id(s) to database and table names. So, it's enough to support rewriting database name in a Table map. 2.1. Add rewrite_db() member to Table_map_log_event: int Table_map_log_event::rewrite_db( const char* new_db, size_t new_db_len, const Format_description_log_event* desc) { /* 1. In temp_buf member (possibly reallocating it) rewrite event length, db length, and db parts 2. Change m_dblen and m_dbnam members */ } Comment. This function assumes that temp_buf member contains Table map binlog representaion (temp_buf is used for creating corresponding BINLOG statement). 2.2. In mysqlbinlog modify corresponding switch case in the process_event() function: Exit_status process_event( PRINT_EVENT_INFO *print_event_info, Log_event *ev, ...) { ... switch (ev_type) { ... case TABLE_MAP_EVENT: { Table_map_log_event *map= ((Table_map_log_event *)ev); if (shall_skip_database(map->get_db_name())) { ... } // WL36 size_t new_len= 0; const char* new_db= binlog_filter->get_rewrite_db( map->get_db_name(), &new_len); if (new_len && map->rewrite_db(new_db, new_len, glob_description_event)) { error("Could not rewrite database name"); goto err; } } case WRITE_ROWS_EVENT: case DELETE_ROWS_EVENT: case UPDATE_ROWS_EVENT: ... } ... } Comment. Rpl_filter::get_rewrite_db(db_from, &len): if filter contains a (db_from, db_to) pair, this function returns pointer to db_to and sets len = db_to length; otherwise, it returns db_from and does not change len value. 3. Supporting rewrite-db for SBR events --------------------------------------- Limited to emiting USE <db_to> instead of USE <db_from>. USE statements can be emited by mysqlbinlog as a result of processing the following events (see process_event() function): - Query_log_event - Load_log_event - Execute_load_query_log_event [ :public Query_log_event ] - Create_file_log_event [ :public Load_log_event ] TODO. Needed to check this list carefully (not sure for Create_file_log_event) Notes. - In replication, only Query_log_event and Load_log_event uses rpl_filter->get_rewrite_db(); - In mysqlbinlog (process_event), Execute_load_query_log_event and Create_file_log_event are processed in separate switch cases. And Load_log_event is processed in the default switch case. Conditions for emiting use-statement: - LOG_EVENT_SUPPRESS_USE_F is OFF for the event (e.g. it is ON for 'create database' statement) - event's db name differs from db_name in PRINT_EVENT_INFO (PRINT_EVENT_INFO keeps db name of the last issued USE statement; initially, this db name is empty). 3.1. In mysqlbinlog.cc - Add the following function: void print_use_stmt(Log_event* event, PRINT_EVENT_INFO* pinfo) { if (event->flags & LOG_EVENT_SUPPRESS_USE_F) return; /* - For events listed above get db_from = event->db; - If db_from is the same as pinfo->db then return; - If there is rewrite-db rule db_from->db_to, set db = db_to. Else set db = db_from; - Print "use <db>" to mysqlbinlog output - Set pinfo->db = db_from (this suppresses emiting use-statements by corresponding log_event's print-function) */ } - In process_event() function add switch case for Load_log_event and add print_use_stmt() invocations where needed (according to the events list above), e.g.: Exit_status process_event( PRINT_EVENT_INFO *print_event_info, Log_event *ev, ...) { ... switch (ev_type) { case QUERY_EVENT: if (shall_skip_database(((Query_log_event*)ev)->db)) goto end; if (opt_base64_output_mode == BASE64_OUTPUT_ALWAYS) { // Possibly in case of rewite-db rule for ev->db // a warning should be emited here (see note below) ... write_event_header_and_base64(ev, ...) ... } else { print_use_stmt((Query_log_event*)ev, print_event_info); ev->print(result_file, print_event_info); } break; ... case LOAD_EVENT: print_use_stmt((Load_log_event*)ev, print_event_info); break; default: ... } ... } Note. write_event_header_and_base64() does not print use-statement. It produces BINLOG statement using ev->temp_buf content (i.e. the binary log representation of the event). We don't rewrite temp_buf here with db_to name (as we do it for Table map event) - this implies the limitation 3 mentioned above. Question: Is supporting of rewite_db + --base64-output really needed currently? 4. Current status ----------------- The outlined design (implemented for mysql-5.1.37) is tested for simple test-cases. TODO. 1. Check list of events which can emit use-statement. 2. Supporting of rewite_db + --base64-output ? ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Guest): Add a mysqlbinlog option to change the used database (36)
by worklog-noreply＠askmonty.org 07 Nov '09

07 Nov '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to change the used database CREATION DATE..: Fri, 07 Aug 2009, 14:57 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-Sprint TASK ID........: 36 (http://askmonty.org/worklog/?tid=36) VERSION........: Server-9.x STATUS.........: Complete PRIORITY.......: 60 WORKED HOURS...: 49 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Guest - Sat, 07 Nov 2009, 22:43)=-=- Category updated. --- /tmp/wklog.36.old.9112 2009-11-07 22:43:50.000000000 +0200 +++ /tmp/wklog.36.new.9112 2009-11-07 22:43:50.000000000 +0200 @@ -1 +1 @@ -Server-RawIdeaBin +Server-Sprint -=-=(Guest - Sat, 07 Nov 2009, 22:43)=-=- Status updated. --- /tmp/wklog.36.old.9112 2009-11-07 22:43:50.000000000 +0200 +++ /tmp/wklog.36.new.9112 2009-11-07 22:43:50.000000000 +0200 @@ -1 +1 @@ -Un-Assigned +Complete -=-=(Bothorsen - Tue, 03 Nov 2009, 13:49)=-=- More cleanup work done by Alexi, Bo and Sergey. Worked 4 hours and estimate 0 hours remain (original estimate increased by 4 hours). -=-=(Bothorsen - Tue, 03 Nov 2009, 13:49)=-=- Sergey and Bo has been working on getting the patch ready, and Alexi has fixed some issues with the patch. Worked 15 hours and estimate 0 hours remain (original estimate increased by 15 hours). -=-=(Bothorsen - Tue, 03 Nov 2009, 13:47)=-=- Alexi has implemented a patch for this item. Worked 30 hours and estimate 0 hours remain (original estimate increased by 30 hours). -=-=(Guest - Tue, 15 Sep 2009, 18:04)=-=- Low Level Design modified. --- /tmp/wklog.36.old.19322 2009-09-15 18:04:49.000000000 +0300 +++ /tmp/wklog.36.new.19322 2009-09-15 18:04:49.000000000 +0300 @@ -191,7 +191,7 @@ - In process_event() function add switch case for Load_log_event and add print_use_stmt() invocations where needed (according to the - events lis above), e.g.: + events list above), e.g.: Exit_status process_event( PRINT_EVENT_INFO *print_event_info, -=-=(Guest - Tue, 15 Sep 2009, 15:53)=-=- Low Level Design modified. --- /tmp/wklog.36.old.13421 2009-09-15 15:53:31.000000000 +0300 +++ /tmp/wklog.36.new.13421 2009-09-15 15:53:31.000000000 +0300 @@ -150,10 +150,17 @@ following events (see process_event() function): - Query_log_event -- Execute_load_query_log_event -- Create_file_log_event - -TODO. Needed to check this list requires carefully !!! +- Load_log_event +- Execute_load_query_log_event [ :public Query_log_event ] +- Create_file_log_event [ :public Load_log_event ] + +TODO. Needed to check this list carefully (not sure for Create_file_log_event) + Notes. + - In replication, only Query_log_event and Load_log_event uses + rpl_filter->get_rewrite_db(); + - In mysqlbinlog (process_event), Execute_load_query_log_event + and Create_file_log_event are processed in separate switch + cases. And Load_log_event is processed in the default switch case. Conditions for emiting use-statement: - LOG_EVENT_SUPPRESS_USE_F is OFF for the event @@ -182,8 +189,9 @@ */ } -- In process_event() function add print_use_stmt() invocations where - needed (according to the events lis above), e.g.: +- In process_event() function add switch case for Load_log_event and + add print_use_stmt() invocations where needed (according to the + events lis above), e.g.: Exit_status process_event( PRINT_EVENT_INFO *print_event_info, @@ -207,6 +215,11 @@ } break; ... + case LOAD_EVENT: + print_use_stmt((Load_log_event*)ev, print_event_info); + break; + default: + ... } ... } -=-=(Guest - Tue, 15 Sep 2009, 12:12)=-=- Low Level Design modified. --- /tmp/wklog.36.old.3961 2009-09-15 12:12:26.000000000 +0300 +++ /tmp/wklog.36.new.3961 2009-09-15 12:12:26.000000000 +0300 @@ -144,6 +144,8 @@ 3. Supporting rewrite-db for SBR events --------------------------------------- +Limited to emiting USE <db_to> instead of USE <db_from>. + USE statements can be emited by mysqlbinlog as a result of processing the following events (see process_event() function): -=-=(Guest - Tue, 15 Sep 2009, 12:08)=-=- Low Level Design modified. --- /tmp/wklog.36.old.3794 2009-09-15 12:08:54.000000000 +0300 +++ /tmp/wklog.36.new.3794 2009-09-15 12:08:54.000000000 +0300 @@ -1 +1,229 @@ +Content +------- +1. Adding rewrite-db option +2. Supporting rewrite-db option for RBR events +3. Supporting rewrite-db option for SBR events + (Limited to affecting only USE statements) +4. Current status + +1. Adding rewrite-db option +--------------------------- + +1.1. Syntax: + --rewrite-db='db_from->db_to' + +1.2. Add 'OPT_REWRITE_DB' to 'options_client' (in client_priv.h). + +1.3. In mysqlbinlog.cc: + +- Add { "rewrite-db", OPT_REWRITE_DB, ...} record to my_long_options: +- Add Rpl_filter object to mysqlbinlog.cc + + Rpl_filter* binlog_filter; + +- Add corresponding switch case to get_one_option(): + + case OPT_REWRITE_DB: + <extract db-from and db-to strings> + binlog_filter->add_db_rewrite(db_from, db_to); + break; + . +Note. To make Rpl_filter usable in a MYSQL_CLIENT context, few small +additional changes are required: + +- In sql_list.cc/h, Sql_alloc::new(size_t) and Sql_alloc::new[](size_t) + uses sql_alloc() which is THD dependent. These are to be modified + as follows: + + #ifdef MYSQL_CLIENT + extern MEM_ROOT sql_list_client_mem_root; // defined in sql_list.cc + #endif + + class Sql_alloc + { ... + static void *operator new(size_t size) throw () + { + #ifndef MYSQL_CLIENT + return sql_alloc(size); + #else + return alloc_root(&sql_list_client_mem_root, size); + #endif + } + static void *operator new[](size_t size) throw () + { + #ifndef MYSQL_CLIENT + return sql_alloc(size); + #else + return alloc_root(&sql_list_client_mem_root, size); + #endif + } + ... + } + +- In rpl_filter.cc: + + Rpl_filter::Rpl_filter() : + ... + { + #ifdef MYSQL_CLIENT + init_alloc_root(&sql_list_client_mem_root, ...); + #endif + ... + } + + Rpl_filter::~Rpl_filter() + { ... + #ifdef MYSQL_CLIENT + free_root(&sql_list_client_mem_root, ...); + #endif + } + +2. Supporting rewrite-db for RBR events +--------------------------------------- + +In binlog, each row operation event is preceded by Table map event(s) which maps +table id(s) to database and table names. So, it's enough to support rewriting +database name in a Table map. + +2.1. Add rewrite_db() member to Table_map_log_event: + + int Table_map_log_event::rewrite_db( + const char* new_db, + size_t new_db_len, + const Format_description_log_event* desc) + { + /* 1. In temp_buf member (possibly reallocating it) rewrite + event length, db length, and db parts + 2. Change m_dblen and m_dbnam members + */ + } + +Comment. This function assumes that temp_buf member contains Table map +binlog representaion (temp_buf is used for creating corresponding +BINLOG statement). + +2.2. In mysqlbinlog modify corresponding switch case in the +process_event() function: + + Exit_status process_event( + PRINT_EVENT_INFO *print_event_info, + Log_event *ev, ...) + { + ... + switch (ev_type) { + ... + case TABLE_MAP_EVENT: + { + Table_map_log_event *map= ((Table_map_log_event *)ev); + if (shall_skip_database(map->get_db_name())) + { ... + } + // WL36 + size_t new_len= 0; + const char* new_db= binlog_filter->get_rewrite_db( + map->get_db_name(), &new_len); + if (new_len && map->rewrite_db(new_db, new_len, + glob_description_event)) + { error("Could not rewrite database name"); + goto err; + } + } + case WRITE_ROWS_EVENT: + case DELETE_ROWS_EVENT: + case UPDATE_ROWS_EVENT: + ... + } + ... + } + +Comment. Rpl_filter::get_rewrite_db(db_from, &len): if filter contains +a (db_from, db_to) pair, this function returns pointer to db_to and +sets len = db_to length; otherwise, it returns db_from and does not +change len value. + +3. Supporting rewrite-db for SBR events +--------------------------------------- + +USE statements can be emited by mysqlbinlog as a result of processing the +following events (see process_event() function): + +- Query_log_event +- Execute_load_query_log_event +- Create_file_log_event + +TODO. Needed to check this list requires carefully !!! + +Conditions for emiting use-statement: +- LOG_EVENT_SUPPRESS_USE_F is OFF for the event + (e.g. it is ON for 'create database' statement) +- event's db name differs from db_name in PRINT_EVENT_INFO + (PRINT_EVENT_INFO keeps db name of the last issued USE statement; + initially, this db name is empty). + +3.1. In mysqlbinlog.cc + +- Add the following function: + + void print_use_stmt(Log_event* event, PRINT_EVENT_INFO* pinfo) + { + if (event->flags & LOG_EVENT_SUPPRESS_USE_F) + return; + /* + - For events listed above get db_from = event->db; + - If db_from is the same as pinfo->db then return; + - If there is rewrite-db rule db_from->db_to, + set db = db_to. Else set db = db_from; + - Print "use <db>" to mysqlbinlog output + - Set pinfo->db = db_from + (this suppresses emiting use-statements by corresponding + log_event's print-function) + */ + } + +- In process_event() function add print_use_stmt() invocations where + needed (according to the events lis above), e.g.: + + Exit_status process_event( + PRINT_EVENT_INFO *print_event_info, + Log_event *ev, ...) + { + ... + switch (ev_type) { + case QUERY_EVENT: + if (shall_skip_database(((Query_log_event*)ev)->db)) + goto end; + if (opt_base64_output_mode == BASE64_OUTPUT_ALWAYS) + { + // Possibly in case of rewite-db rule for ev->db + // a warning should be emited here (see note below) + ... write_event_header_and_base64(ev, ...) ... + } + else + { + print_use_stmt((Query_log_event*)ev, print_event_info); + ev->print(result_file, print_event_info); + } + break; + ... + } + ... + } + +Note. write_event_header_and_base64() does not print use-statement. It +produces BINLOG statement using ev->temp_buf content (i.e. the binary +log representation of the event). We don't rewrite temp_buf here with +db_to name (as we do it for Table map event) - this implies the +limitation 3 mentioned above. +Question: Is supporting of rewite_db + --base64-output really needed +currently? + +4. Current status +----------------- + +The outlined design (implemented for mysql-5.1.37) is tested for +simple test-cases. + +TODO. 1. Check list of events which can emit use-statement. + 2. Supporting of rewite_db + --base64-output ? + -=-=(Guest - Mon, 14 Sep 2009, 11:51)=-=- Low Level Design modified. --- /tmp/wklog.36.old.9711 2009-09-14 11:51:43.000000000 +0300 +++ /tmp/wklog.36.new.9711 2009-09-14 11:51:43.000000000 +0300 @@ -1 +1 @@ -Pay no attention: just check for having access + ------------------------------------------------------------ -=-=(View All Progress Notes, 18 total)=-=- http://askmonty.org/worklog/index.pl?tid=36&nolimit=1 DESCRIPTION: Sometimes there is a need to take a binary log and apply it to a database with a different name than the original name of the database on binlog producer. If one is using statement-based replication, he can achieve this by grepping out "USE dbname" statements out of the output of mysqlbinlog(*). With row-based replication this is no longer possible, as database name is encoded within the the BINLOG '....' statement. This task is about adding an option to mysqlbinlog that would allow to change the names of used databases in both RBR and SBR events. (*) this implies that all statements refer to tables in the current database, doesn't catch updates made inside stored functions and so forth, but still works for a practially-important subset of cases. HIGH-LEVEL SPECIFICATION: Context ------- (See http://askmonty.org/wiki/index.php/Scratch/ReplicationOptions for global overview) At the moment, the server has a replication slave option --replicate-rewrite-db="from->to" the option affects - Table_map_log_event (all RBR events) - Load_log_event (LOAD DATA) - Query_log_event (SBR-based updates, with the usual assumption that the statement refers to tables in current database, so that changing the current database will make the statement to work on a table in a different database). See also MySQL BUG#42941. Note this bug is fixed in MySQL 5.1.37, which is not merged into MariaDB at the time of writing, but planned to be merged before release. What we could do ---------------- Option1: make mysqlbinlog accept --replicate-rewrite-db option ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Make mysqlbinlog accept --replicate-rewrite-db options and process them to the same extent as replication slave would process --replicate-rewrite-db option. Option2: Add database-agnostic RBR events and --strip-db option ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Right now RBR events require a databasename. It is not possible to have RBR event stream that won't mention which database the events are for. When I tried to use debugger and specify empty database name, attempt to apply the binlog resulted in this error: 090809 17:38:44 [ERROR] Slave SQL: Error 'Table '.tablename' doesn't exist' on opening tables, We could do as follows: - Make the server interpret empty database name in RBR event (i.e. in a Table_map_log_event) as "use current database". Binlog slave thread probably should not allow such events as it doesn't have a natural current database. - Add a mysqlbinlog --strip-db option that would = not produce any "USE dbname" statements = change databasename for all RBR events to be empty That way, mysqlbinlog output will be database-agnostic and apply to the current database. (this will have the usual limitations that we assume that all statements in the binlog refer to the current database). Option3: Enhance database rewrite ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If there is a need to support database change for statements that use dbname.tablename notation and are replicated as statements (i.e. are DDL statements and/or DML statements that are binlogged as statements), then that could be supported as follows: - Make the server's parser recognize special form of comments /* !database-alias(oldname,newname) */ and save the mapping somewhere - Put the hooks in table open and name resolution code to use the saved mapping. Once we've done the above, it will be easy to perform a complete, no-compromise or restrictions database name change in binary log. It will be possible to do the rewrites either on the slave ( --replicate-rewrite-db will work for all kinds of statements), or in mysqlbinlog (adding a comment is easy and doesn't require mysqlbinlog to parse the statement). LOW-LEVEL DESIGN: Content ------- 1. Adding rewrite-db option 2. Supporting rewrite-db option for RBR events 3. Supporting rewrite-db option for SBR events (Limited to affecting only USE statements) 4. Current status 1. Adding rewrite-db option --------------------------- 1.1. Syntax: --rewrite-db='db_from->db_to' 1.2. Add 'OPT_REWRITE_DB' to 'options_client' (in client_priv.h). 1.3. In mysqlbinlog.cc: - Add { "rewrite-db", OPT_REWRITE_DB, ...} record to my_long_options: - Add Rpl_filter object to mysqlbinlog.cc Rpl_filter* binlog_filter; - Add corresponding switch case to get_one_option(): case OPT_REWRITE_DB: <extract db-from and db-to strings> binlog_filter->add_db_rewrite(db_from, db_to); break; . Note. To make Rpl_filter usable in a MYSQL_CLIENT context, few small additional changes are required: - In sql_list.cc/h, Sql_alloc::new(size_t) and Sql_alloc::new[](size_t) uses sql_alloc() which is THD dependent. These are to be modified as follows: #ifdef MYSQL_CLIENT extern MEM_ROOT sql_list_client_mem_root; // defined in sql_list.cc #endif class Sql_alloc { ... static void *operator new(size_t size) throw () { #ifndef MYSQL_CLIENT return sql_alloc(size); #else return alloc_root(&sql_list_client_mem_root, size); #endif } static void *operator new[](size_t size) throw () { #ifndef MYSQL_CLIENT return sql_alloc(size); #else return alloc_root(&sql_list_client_mem_root, size); #endif } ... } - In rpl_filter.cc: Rpl_filter::Rpl_filter() : ... { #ifdef MYSQL_CLIENT init_alloc_root(&sql_list_client_mem_root, ...); #endif ... } Rpl_filter::~Rpl_filter() { ... #ifdef MYSQL_CLIENT free_root(&sql_list_client_mem_root, ...); #endif } 2. Supporting rewrite-db for RBR events --------------------------------------- In binlog, each row operation event is preceded by Table map event(s) which maps table id(s) to database and table names. So, it's enough to support rewriting database name in a Table map. 2.1. Add rewrite_db() member to Table_map_log_event: int Table_map_log_event::rewrite_db( const char* new_db, size_t new_db_len, const Format_description_log_event* desc) { /* 1. In temp_buf member (possibly reallocating it) rewrite event length, db length, and db parts 2. Change m_dblen and m_dbnam members */ } Comment. This function assumes that temp_buf member contains Table map binlog representaion (temp_buf is used for creating corresponding BINLOG statement). 2.2. In mysqlbinlog modify corresponding switch case in the process_event() function: Exit_status process_event( PRINT_EVENT_INFO *print_event_info, Log_event *ev, ...) { ... switch (ev_type) { ... case TABLE_MAP_EVENT: { Table_map_log_event *map= ((Table_map_log_event *)ev); if (shall_skip_database(map->get_db_name())) { ... } // WL36 size_t new_len= 0; const char* new_db= binlog_filter->get_rewrite_db( map->get_db_name(), &new_len); if (new_len && map->rewrite_db(new_db, new_len, glob_description_event)) { error("Could not rewrite database name"); goto err; } } case WRITE_ROWS_EVENT: case DELETE_ROWS_EVENT: case UPDATE_ROWS_EVENT: ... } ... } Comment. Rpl_filter::get_rewrite_db(db_from, &len): if filter contains a (db_from, db_to) pair, this function returns pointer to db_to and sets len = db_to length; otherwise, it returns db_from and does not change len value. 3. Supporting rewrite-db for SBR events --------------------------------------- Limited to emiting USE <db_to> instead of USE <db_from>. USE statements can be emited by mysqlbinlog as a result of processing the following events (see process_event() function): - Query_log_event - Load_log_event - Execute_load_query_log_event [ :public Query_log_event ] - Create_file_log_event [ :public Load_log_event ] TODO. Needed to check this list carefully (not sure for Create_file_log_event) Notes. - In replication, only Query_log_event and Load_log_event uses rpl_filter->get_rewrite_db(); - In mysqlbinlog (process_event), Execute_load_query_log_event and Create_file_log_event are processed in separate switch cases. And Load_log_event is processed in the default switch case. Conditions for emiting use-statement: - LOG_EVENT_SUPPRESS_USE_F is OFF for the event (e.g. it is ON for 'create database' statement) - event's db name differs from db_name in PRINT_EVENT_INFO (PRINT_EVENT_INFO keeps db name of the last issued USE statement; initially, this db name is empty). 3.1. In mysqlbinlog.cc - Add the following function: void print_use_stmt(Log_event* event, PRINT_EVENT_INFO* pinfo) { if (event->flags & LOG_EVENT_SUPPRESS_USE_F) return; /* - For events listed above get db_from = event->db; - If db_from is the same as pinfo->db then return; - If there is rewrite-db rule db_from->db_to, set db = db_to. Else set db = db_from; - Print "use <db>" to mysqlbinlog output - Set pinfo->db = db_from (this suppresses emiting use-statements by corresponding log_event's print-function) */ } - In process_event() function add switch case for Load_log_event and add print_use_stmt() invocations where needed (according to the events list above), e.g.: Exit_status process_event( PRINT_EVENT_INFO *print_event_info, Log_event *ev, ...) { ... switch (ev_type) { case QUERY_EVENT: if (shall_skip_database(((Query_log_event*)ev)->db)) goto end; if (opt_base64_output_mode == BASE64_OUTPUT_ALWAYS) { // Possibly in case of rewite-db rule for ev->db // a warning should be emited here (see note below) ... write_event_header_and_base64(ev, ...) ... } else { print_use_stmt((Query_log_event*)ev, print_event_info); ev->print(result_file, print_event_info); } break; ... case LOAD_EVENT: print_use_stmt((Load_log_event*)ev, print_event_info); break; default: ... } ... } Note. write_event_header_and_base64() does not print use-statement. It produces BINLOG statement using ev->temp_buf content (i.e. the binary log representation of the event). We don't rewrite temp_buf here with db_to name (as we do it for Table map event) - this implies the limitation 3 mentioned above. Question: Is supporting of rewite_db + --base64-output really needed currently? 4. Current status ----------------- The outlined design (implemented for mysql-5.1.37) is tested for simple test-cases. TODO. 1. Check list of events which can emit use-statement. 2. Supporting of rewite_db + --base64-output ? ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] bzr commit into MariaDB 5.1, with Maria 1.5:maria branch (knielsen:2763)
by knielsen＠knielsen-hq.org 07 Nov '09

07 Nov '09

#At lp:maria 2763 knielsen(a)knielsen-hq.org 2009-11-07 Bump revision number for MariaDB 5.1.39 release. modified: configure.in === modified file 'configure.in' --- a/configure.in 2009-11-06 17:22:32 +0000 +++ b/configure.in 2009-11-07 15:56:51 +0000 @@ -15,7 +15,7 @@ AC_CANONICAL_SYSTEM # MySQL version number. # # Note: the following line must be parseable by win/configure.js:GetVersion() -AM_INIT_AUTOMAKE(mysql, 5.1.38-maria-beta) +AM_INIT_AUTOMAKE(mysql, 5.1.39-maria-beta) AM_CONFIG_HEADER([include/config.h:config.h.in]) PROTOCOL_VERSION=10

1 0

[Maria-developers] Updated (by Monty): Change to use c_ptr_safe() instead of c_ptr() (62)
by worklog-noreply＠askmonty.org 07 Nov '09

07 Nov '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Change to use c_ptr_safe() instead of c_ptr() CREATION DATE..: Sat, 07 Nov 2009, 13:14 SUPERVISOR.....: Bothorsen IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 62 (http://askmonty.org/worklog/?tid=62) VERSION........: Benchmarks-3.0 STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 30 (hours remain) ORIG. ESTIMATE.: 30 PROGRESS NOTES: -=-=(Monty - Sat, 07 Nov 2009, 13:18)=-=- High-Level Specification modified. --- /tmp/wklog.62.old.20510 2009-11-07 11:18:21.000000000 +0000 +++ /tmp/wklog.62.new.20510 2009-11-07 11:18:21.000000000 +0000 @@ -1 +1,9 @@ +What to do: +- Get rid of all \0 terminated strings that we can get rid of (in other words, +always use String() and change C functions to take string and length). +- Add a bit to String() that can be set when we initialize the String with a \0 +terminated string. When the bit is set, we know that c_ptr() is safe to use. +- Change to use c_ptr_safe() instead of c_ptr(). (Not that when the has-end-zero +bit is set we don't have to do an alloc if the whole string is used). +- Benchmark to see the effects of the above. DESCRIPTION: Change to use c_ptr_safe() instead of c_ptr() This is to avoid possible (but unlikely) problems with disappearing \0 after usage of c_ptr(). Reasons to do this are: - Getting rid of some valgrind warnings (where the end \0 was never written). - It's a gotcha for developers that would use Strings without knowing when c_ptr() is safe to use. HIGH-LEVEL SPECIFICATION: What to do: - Get rid of all \0 terminated strings that we can get rid of (in other words, always use String() and change C functions to take string and length). - Add a bit to String() that can be set when we initialize the String with a \0 terminated string. When the bit is set, we know that c_ptr() is safe to use. - Change to use c_ptr_safe() instead of c_ptr(). (Not that when the has-end-zero bit is set we don't have to do an alloc if the whole string is used). - Benchmark to see the effects of the above. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Monty): Change to use c_ptr_safe() instead of c_ptr() (62)
by worklog-noreply＠askmonty.org 07 Nov '09

07 Nov '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Change to use c_ptr_safe() instead of c_ptr() CREATION DATE..: Sat, 07 Nov 2009, 13:14 SUPERVISOR.....: Bothorsen IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 62 (http://askmonty.org/worklog/?tid=62) VERSION........: Benchmarks-3.0 STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 30 (hours remain) ORIG. ESTIMATE.: 30 PROGRESS NOTES: -=-=(Monty - Sat, 07 Nov 2009, 13:18)=-=- High-Level Specification modified. --- /tmp/wklog.62.old.20510 2009-11-07 11:18:21.000000000 +0000 +++ /tmp/wklog.62.new.20510 2009-11-07 11:18:21.000000000 +0000 @@ -1 +1,9 @@ +What to do: +- Get rid of all \0 terminated strings that we can get rid of (in other words, +always use String() and change C functions to take string and length). +- Add a bit to String() that can be set when we initialize the String with a \0 +terminated string. When the bit is set, we know that c_ptr() is safe to use. +- Change to use c_ptr_safe() instead of c_ptr(). (Not that when the has-end-zero +bit is set we don't have to do an alloc if the whole string is used). +- Benchmark to see the effects of the above. DESCRIPTION: Change to use c_ptr_safe() instead of c_ptr() This is to avoid possible (but unlikely) problems with disappearing \0 after usage of c_ptr(). Reasons to do this are: - Getting rid of some valgrind warnings (where the end \0 was never written). - It's a gotcha for developers that would use Strings without knowing when c_ptr() is safe to use. HIGH-LEVEL SPECIFICATION: What to do: - Get rid of all \0 terminated strings that we can get rid of (in other words, always use String() and change C functions to take string and length). - Add a bit to String() that can be set when we initialize the String with a \0 terminated string. When the bit is set, we know that c_ptr() is safe to use. - Change to use c_ptr_safe() instead of c_ptr(). (Not that when the has-end-zero bit is set we don't have to do an alloc if the whole string is used). - Benchmark to see the effects of the above. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0