August 2009 - developers - lists.mariadb.org

[Maria-developers] Updated (by Guest): index_merge: fair choice between index_merge union and range access (24)
by worklog-noreply＠askmonty.org 16 Aug '09

16 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: index_merge: fair choice between index_merge union and range access CREATION DATE..: Tue, 26 May 2009, 12:10 SUPERVISOR.....: Monty IMPLEMENTOR....: Psergey COPIES TO......: Psergey CATEGORY.......: Server-Sprint TASK ID........: 24 (http://askmonty.org/worklog/?tid=24) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Guest - Sun, 16 Aug 2009, 01:03)=-=- Low Level Design modified. --- /tmp/wklog.24.old.20767 2009-08-16 01:03:11.000000000 +0300 +++ /tmp/wklog.24.new.20767 2009-08-16 01:03:11.000000000 +0300 @@ -18,6 +18,8 @@ # a range tree has range access options, possibly for several keys range_tree = range(key1) AND range(key2) AND ... AND range(keyN); + (here range(keyi) may represent ranges not for initial keyi prefixes, + but ranges for any infixes for keyi) # merge tree represents several way to index_merge imerge_tree = imerge1 AND imerge2 AND ... @@ -47,13 +49,13 @@ R.add(range_union(A.range(i), B.range(i))); if (R has at least one range access) - return R; + return R; // DISCARD-IMERGE-2 else { /* could not build any range accesses. construct index_merge */ - remove non-ranges from A; // DISCARD-IMERGE-2 + remove non-ranges from A; remove non-ranges from B; - return new index_merge(A, B); + return new index_merge(A, B); // DISCARD-IMERGE-3 } } else if (A is range tree and B is index_merge tree (or vice versa)) @@ -65,12 +67,12 @@ (range_treeB_11 OR range_treeB_12 OR ... OR range_treeB_1N) AND (range_treeB_21 OR range_treeB_22 OR ... OR range_treeB_2N) AND ... - (range_treeB_K1 OR range_treeB_K2 OR ... OR range_treeB_kN) AND + (range_treeB_K1 OR range_treeB_K2 OR ... OR range_treeB_kN) = (range_treeA OR range_treeB_11 OR ... OR range_treeB_1N) AND (range_treeA OR range_treeB_21 OR ... OR range_treeB_2N) AND ... - (range_treeA OR range_treeB_11 OR ... OR range_treeB_1N) AND + (range_treeA OR range_treeB_11 OR ... OR range_treeB_1N) Now each line represents an index_merge.. } @@ -82,18 +84,18 @@ OR imergeB1 AND imergeB2 AND ... AND imergeBN - -> (discard all imergeA{i=2,3,...} -> // DISCARD-IMERGE-3 + -> (discard all imergeA{i=2,3,...} -> // DISCARD-IMERGE-4 imergeA1 OR - imergeB1 AND imergeB2 AND ... AND imergeBN = + imergeB1 = - = (combine imergeA1 with each of the imergeB{i} ) = + = (combine imergeA1 with each of the range_treeB_1{i} ) = - combine(imergeA1 OR imergeB1) AND - combine(imergeA1 OR imergeB2) AND + combine(imergeA1 OR range_treeB_11) AND + combine(imergeA1 OR range_treeB_12) AND ... AND - combine(imergeA1 OR imergeBN) + combine(imergeA1 OR range_treeB_1N) } } @@ -109,7 +111,7 @@ DISCARD-IMERGE-2 step will cause index_merge option to be discarded when the WHERE clause has this form (conditions t.badkey may have abritrary form): - (t.badkey<c1 AND t.key1=c1) OR (t.key1=c2 AND t.badkey < c2) + (t.badkey<c1 AND t.key1=c1) OR (t.key2=c2 AND t.badkey < c2) DISCARD-IMERGE-3 manifests itself as the following effect: suppose there are two indexes: @@ -123,6 +125,8 @@ The optimizer will generate the plans that only use the "col1=c1" part. The right side of the AND will be ignored even if it has good selectivity. +(Here an imerge for col2=c2 OR col3=c3 won't be built since neither col2=c2 nor +col3=c3 represent index ranges.) 2. New implementation -=-=(Guest - Mon, 20 Jul 2009, 17:13)=-=- Dependency deleted: 30 no longer depends on 24 -=-=(Guest - Sat, 20 Jun 2009, 09:34)=-=- Low Level Design modified. --- /tmp/wklog.24.old.21663 2009-06-20 09:34:48.000000000 +0300 +++ /tmp/wklog.24.new.21663 2009-06-20 09:34:48.000000000 +0300 @@ -4,6 +4,7 @@ 2. New implementation 2.1 New tree_and() 2.2 New tree_or() +3. Testing and required coverage </contents> 1. Current implementation overview @@ -240,3 +241,14 @@ In order to limit the impact of this combinatorial explosion, we will introduce a rule that we won't generate more than #defined MAX_IMERGE_OPTS options. + +3. Testing and required coverage +================================ +So far could find the following user cases: + +* BUG#17259: Query optimizer chooses wrong index +* BUG#17673: Optimizer does not use Index Merge optimization in some cases +* BUG#23322: Optimizer sometimes erroniously prefers other index over index merge +* BUG#30151: optimizer is very reluctant to chose index_merge algorithm + + -=-=(Guest - Thu, 18 Jun 2009, 16:55)=-=- Low Level Design modified. --- /tmp/wklog.24.old.19152 2009-06-18 16:55:00.000000000 +0300 +++ /tmp/wklog.24.new.19152 2009-06-18 16:55:00.000000000 +0300 @@ -141,13 +141,15 @@ Operations on SEL_ARG trees will be modified to produce/process the trees of this kind: + 2.1 New tree_and() ------------------ In order not to lose plans, we'll make these changes: -1. Don't remove index_merge part of the tree. +A1. Don't remove index_merge part of the tree (this will take care of + DISCARD-IMERGE-1 problem) -2. Push range conditions down into index_merge trees that may support them. +A2. Push range conditions down into index_merge trees that may support them. if one tree has range(key1) and the other tree has imerge(key1 OR key2) then perform an equvalent of this operation: @@ -155,8 +157,86 @@ (rangeA(key1) AND rangeB(key1)) OR (rangeA(key1) AND rangeB(key2)) -3. Just as before: if both sel_tree A and sel_tree B have index_merge options, +A3. Just as before: if both sel_tree A and sel_tree B have index_merge options, concatenate them together. -2.2 New tree_or() +2.2 New tree_or() +----------------- +O1. Dont remove non-range plans: + Current tree_or() code will refuse to produce index_merge plans for + conditions like + + "t.key1part2=const OR t.key2part1=const" + + (this is marked as DISCARD-IMERGE-3). This was justifed as the left part of + the AND condition is not usable for range access, and the operation of + tree_and() guaranteed that there was no way it could changed to make a + usable range plan. With new tree_and() and rule A2, this is no longer the + case. For example for this query: + + (t.key1part2=const OR t.key2part1=const) AND t.key1part1=const + + it will construct a + + imerge(t.key1part2=const OR t.key2part1=const), range(t.key1part1=const) + + then tree_and() will apply rule A2 to push the range down into index merge + and after that we'll have: + + range(t.key1part1=const) + imerge( + t.key1part2=const AND t.key1part1=const, + t.key2part1=const + ) + note that imerge(...) describes a usable index_merge plan and it's possible + that it will be the best access path. + +O2. "Create index_merge accesses when possible" + Current tree_or() will not create index_merge access when it could create + non-index merge access (see DISCARD-IMERGE-3 and its example in the "Problems + in the current implementation" section). This will be changed to work as + follows: we will create index_merge made for index scans that didn't have + their match in the other sel_tree. + Ilustrating it with an example: + + | sel_tree_A | sel_tree_B | A or B | include in index_merge? + ------+------------+------------+--------+------------------------ + key1 | cond1 | cond2 | condM | no + key2 | cond3 | cond4 | NULL | no + key3 | cond5 | | | yes, A-side + key4 | cond6 | | | yes, A-side + key5 | | cond7 | | yes, B-side + key6 | | cond8 | | yes, B-side + + here we assume that + - (cond1 OR cond2) did produce a combined range. Not including them in + index_merge. + - (cond3 OR cond4) didn't produce a usable range (e.g. they were + t.key1part1=c1 AND t.key1part2=c1, respectively, and combining them + didn't yield any range list) + - All other scand didn't have their counterparts, so we'll end up with a + SEL_TREE of: + + range(condM) AND index_merge((cond5 AND cond6),(cond7 AND cond8)) + . + +O4. There is no O4. DISCARD-INDEX-MERGE-4 will remain there. The idea is +that although DISCARD-INDEX-MERGE-4 does discard plans, so far we haven +seen any complaints that could be attributed to it. +If we face the need to lift DISCARD-INDEX-MERGE-4, our answer will be to +lift it ,and produce a cross-product: + + ((key1p OR key2p) AND (key3p OR key4p)) + OR + ((key5p OR key6p) AND (key7p OR key8p)) + + = (key1p OR key2p OR key5p OR key6p) AND // this part is currently + (key3p OR key4p OR key5p OR key6p) AND // produced + + (key1p OR key2p OR key5p OR key6p) AND // this part will be added + (key3p OR key4p OR key5p OR key6p) //. + +In order to limit the impact of this combinatorial explosion, we will +introduce a rule that we won't generate more than #defined +MAX_IMERGE_OPTS options. -=-=(Guest - Thu, 18 Jun 2009, 14:56)=-=- Low Level Design modified. --- /tmp/wklog.24.old.15612 2009-06-18 14:56:09.000000000 +0300 +++ /tmp/wklog.24.new.15612 2009-06-18 14:56:09.000000000 +0300 @@ -1 +1,162 @@ +<contents> +1. Current implementation overview +1.1. Problems in the current implementation +2. New implementation +2.1 New tree_and() +2.2 New tree_or() +</contents> + +1. Current implementation overview +================================== +At the moment, range analyzer works as follows: + +SEL_TREE structure represents + + # There are sel_trees, a sel_tree is either range or merge tree + sel_tree = range_tree | imerge_tree + + # a range tree has range access options, possibly for several keys + range_tree = range(key1) AND range(key2) AND ... AND range(keyN); + + # merge tree represents several way to index_merge + imerge_tree = imerge1 AND imerge2 AND ... + + # a way to do index merge == a set to use of different indexes. + imergeX = range_tree1 OR range_tree2 OR .. + where no pair of range_treeX have ranges over the same index. + + + tree_and(A, B) + { + if (both A and B are range trees) + return a range_tree with computed intersection for each range; + if (only one of A and B is a range tree) + return that tree; // DISCARD-IMERGE-1 + // at this point both trees are index_merge trees + return concat_lists( A.imerge1 ... A.imergeN, B.imerge1 ... B.imergeN); + } + + + tree_or(A, B) + { + if (A and B are range trees) + { + R = new range_tree; + for each index i + R.add(range_union(A.range(i), B.range(i))); + + if (R has at least one range access) + return R; + else + { + /* could not build any range accesses. construct index_merge */ + remove non-ranges from A; // DISCARD-IMERGE-2 + remove non-ranges from B; + return new index_merge(A, B); + } + } + else if (A is range tree and B is index_merge tree (or vice versa)) + { + Perform this transformation: + + range_treeA // this is A + OR + (range_treeB_11 OR range_treeB_12 OR ... OR range_treeB_1N) AND + (range_treeB_21 OR range_treeB_22 OR ... OR range_treeB_2N) AND + ... + (range_treeB_K1 OR range_treeB_K2 OR ... OR range_treeB_kN) AND + = + (range_treeA OR range_treeB_11 OR ... OR range_treeB_1N) AND + (range_treeA OR range_treeB_21 OR ... OR range_treeB_2N) AND + ... + (range_treeA OR range_treeB_11 OR ... OR range_treeB_1N) AND + + Now each line represents an index_merge.. + } + else if (both A and B are index_merge trees) + { + Perform this transformation: + + imergeA1 AND imergeA2 AND ... AND imergeAN + OR + imergeB1 AND imergeB2 AND ... AND imergeBN + + -> (discard all imergeA{i=2,3,...} -> // DISCARD-IMERGE-3 + + imergeA1 + OR + imergeB1 AND imergeB2 AND ... AND imergeBN = + + = (combine imergeA1 with each of the imergeB{i} ) = + + combine(imergeA1 OR imergeB1) AND + combine(imergeA1 OR imergeB2) AND + ... AND + combine(imergeA1 OR imergeBN) + } + } + +1.1. Problems in the current implementation +------------------------------------------- +As marked in the code above: + +DISCARD-IMERGE-1 step will cause index_merge option to be discarded when +the WHERE clause has this form: + + (t.key1=c1 OR t.key2=c2) AND t.badkey < c3 + +DISCARD-IMERGE-2 step will cause index_merge option to be discarded when +the WHERE clause has this form (conditions t.badkey may have abritrary form): + + (t.badkey<c1 AND t.key1=c1) OR (t.key1=c2 AND t.badkey < c2) + +DISCARD-IMERGE-3 manifests itself as the following effect: suppose there are +two indexes: + + INDEX i1(col1, col2), + INDEX i2(col1, col3) + +and this WHERE clause: + + col1=c1 AND (col2=c2 OR col3=c3) + +The optimizer will generate the plans that only use the "col1=c1" part. The +right side of the AND will be ignored even if it has good selectivity. + + +2. New implementation +===================== + +<general idea> +* Don't start fighting combinatorial explosion until we've actually got one. +</> + +SEL_TREE structure will be now able to hold both index_merge and range scan +candidates at the same time. That is, + + sel_tree2 = range_tree AND imerge_tree + +where both parts are optional (i.e. can be empty) + +Operations on SEL_ARG trees will be modified to produce/process the trees of +this kind: + +2.1 New tree_and() +------------------ +In order not to lose plans, we'll make these changes: + +1. Don't remove index_merge part of the tree. + +2. Push range conditions down into index_merge trees that may support them. + if one tree has range(key1) and the other tree has imerge(key1 OR key2) + then perform an equvalent of this operation: + + rangeA(key1) AND ( rangeB(key1) OR rangeB(key2)) = + + (rangeA(key1) AND rangeB(key1)) OR (rangeA(key1) AND rangeB(key2)) + +3. Just as before: if both sel_tree A and sel_tree B have index_merge options, + concatenate them together. + +2.2 New tree_or() -=-=(Psergey - Wed, 03 Jun 2009, 12:09)=-=- Dependency created: 30 now depends on 24 -=-=(Guest - Mon, 01 Jun 2009, 23:30)=-=- High-Level Specification modified. --- /tmp/wklog.24.old.21580 2009-06-01 23:30:06.000000000 +0300 +++ /tmp/wklog.24.new.21580 2009-06-01 23:30:06.000000000 +0300 @@ -64,6 +64,9 @@ * How strict is the limitation on the form of the WHERE? +* Which version should this be based on? 5.1? Which patches are should be in + (google's/percona's/maria/etc?) + * TODO: The optimizer didn't compare costs of index_merge and range before (ok it did but that was done for accesses to different tables). Will there be any possible gotchas here? -=-=(Guest - Wed, 27 May 2009, 13:59)=-=- Title modified. --- /tmp/wklog.24.old.9498 2009-05-27 13:59:23.000000000 +0300 +++ /tmp/wklog.24.new.9498 2009-05-27 13:59:23.000000000 +0300 @@ -1 +1 @@ -index_merge optimizer: dont discard index_merge union strategies when range is available +index_merge: fair choice between index_merge union and range access -=-=(Guest - Tue, 26 May 2009, 13:27)=-=- High-Level Specification modified. --- /tmp/wklog.24.old.305 2009-05-26 13:27:32.000000000 +0300 +++ /tmp/wklog.24.new.305 2009-05-26 13:27:32.000000000 +0300 @@ -1 +1,70 @@ +(Not a ready HLS but draft) +<contents> +Solution overview +Limitations +TODO + +</contents> + +Solution overview +================= +The idea is to delay discarding potential index_merge plans until the point +where it is really necessary. + +This way, we won't have to do much changes in the range analyzer, but will be +able to keep potential index_merge plan just enough so that it's possible to +take it into consideration together with range access plans. + +Since there are no changes in the optimizer, the ability to consider both +range and index_merge options will be limited to WHERE clauses of this form: + + WHERE := range_cond(key1_1) AND + range_cond(key2_1) AND + other_cond AND + index_merge_OR_cond1(key3_1, key3_2, ...) + index_merge_OR_cond2(key4_1, key4_2, ...) + +where + + index_merge_OR_cond{N} := (range_cond(keyN_1) OR + range_cond(keyN_2) OR ...) + + + range_cond(keyX) := condition that allows to construct range access of keyX + and doesn't allow to construct range/index_merge accesses + for any keys of the table in question. + + +For such WHERE clauses, the range analyzer will produce SEL_TREE of this form: + + SEL_TREE( + range(key1_1), + ... + range(key2_1), + SEL_IMERGE( (1) + SEL_TREE(key3_1}) + SEL_TREE(key3_2}) + ... + ) + ... + ) + +which can be used to make a cost-based choice between range and index_merge. + +Limitations +----------- +This will not be a full solution in a sense that the range analyzer will not +be able to produce sel_tree (1) if the WHERE clause is specified in other form +(e.g. brackets were opened). + +TODO +---- +* is it a problem if there are keys that are referred to both from + index_merge and from range access? + +* How strict is the limitation on the form of the WHERE? + +* TODO: The optimizer didn't compare costs of index_merge and range before (ok + it did but that was done for accesses to different tables). Will there be any + possible gotchas here? DESCRIPTION: Current range optimizer will discard possible index_merge/[sort]union strategies when there is a possible range plan. This action is a part of measures we take to avoid combinatorial explosion of possible range/ index_merge strategies. A bad side effect of this is that for WHERE clauses in form t.key1= 'very-frequent-value' AND (t.key2='rare-value1' OR t.key3='rare-value2') the optimizer will - discard union(key2,key3) in favor of range(key1) - consider costs of using range(key1) and discard that plan also and the overall effect is that possible poor range access will cause possible good index_merge access not to be considered. This WL is to about lifting this limitation at least for some subset of WHERE clauses. HIGH-LEVEL SPECIFICATION: (Not a ready HLS but draft) <contents> Solution overview Limitations TODO </contents> Solution overview ================= The idea is to delay discarding potential index_merge plans until the point where it is really necessary. This way, we won't have to do much changes in the range analyzer, but will be able to keep potential index_merge plan just enough so that it's possible to take it into consideration together with range access plans. Since there are no changes in the optimizer, the ability to consider both range and index_merge options will be limited to WHERE clauses of this form: WHERE := range_cond(key1_1) AND range_cond(key2_1) AND other_cond AND index_merge_OR_cond1(key3_1, key3_2, ...) index_merge_OR_cond2(key4_1, key4_2, ...) where index_merge_OR_cond{N} := (range_cond(keyN_1) OR range_cond(keyN_2) OR ...) range_cond(keyX) := condition that allows to construct range access of keyX and doesn't allow to construct range/index_merge accesses for any keys of the table in question. For such WHERE clauses, the range analyzer will produce SEL_TREE of this form: SEL_TREE( range(key1_1), ... range(key2_1), SEL_IMERGE( (1) SEL_TREE(key3_1}) SEL_TREE(key3_2}) ... ) ... ) which can be used to make a cost-based choice between range and index_merge. Limitations ----------- This will not be a full solution in a sense that the range analyzer will not be able to produce sel_tree (1) if the WHERE clause is specified in other form (e.g. brackets were opened). TODO ---- * is it a problem if there are keys that are referred to both from index_merge and from range access? * How strict is the limitation on the form of the WHERE? * Which version should this be based on? 5.1? Which patches are should be in (google's/percona's/maria/etc?) * TODO: The optimizer didn't compare costs of index_merge and range before (ok it did but that was done for accesses to different tables). Will there be any possible gotchas here? LOW-LEVEL DESIGN: <contents> 1. Current implementation overview 1.1. Problems in the current implementation 2. New implementation 2.1 New tree_and() 2.2 New tree_or() 3. Testing and required coverage </contents> 1. Current implementation overview ================================== At the moment, range analyzer works as follows: SEL_TREE structure represents # There are sel_trees, a sel_tree is either range or merge tree sel_tree = range_tree | imerge_tree # a range tree has range access options, possibly for several keys range_tree = range(key1) AND range(key2) AND ... AND range(keyN); (here range(keyi) may represent ranges not for initial keyi prefixes, but ranges for any infixes for keyi) # merge tree represents several way to index_merge imerge_tree = imerge1 AND imerge2 AND ... # a way to do index merge == a set to use of different indexes. imergeX = range_tree1 OR range_tree2 OR .. where no pair of range_treeX have ranges over the same index. tree_and(A, B) { if (both A and B are range trees) return a range_tree with computed intersection for each range; if (only one of A and B is a range tree) return that tree; // DISCARD-IMERGE-1 // at this point both trees are index_merge trees return concat_lists( A.imerge1 ... A.imergeN, B.imerge1 ... B.imergeN); } tree_or(A, B) { if (A and B are range trees) { R = new range_tree; for each index i R.add(range_union(A.range(i), B.range(i))); if (R has at least one range access) return R; // DISCARD-IMERGE-2 else { /* could not build any range accesses. construct index_merge */ remove non-ranges from A; remove non-ranges from B; return new index_merge(A, B); // DISCARD-IMERGE-3 } } else if (A is range tree and B is index_merge tree (or vice versa)) { Perform this transformation: range_treeA // this is A OR (range_treeB_11 OR range_treeB_12 OR ... OR range_treeB_1N) AND (range_treeB_21 OR range_treeB_22 OR ... OR range_treeB_2N) AND ... (range_treeB_K1 OR range_treeB_K2 OR ... OR range_treeB_kN) = (range_treeA OR range_treeB_11 OR ... OR range_treeB_1N) AND (range_treeA OR range_treeB_21 OR ... OR range_treeB_2N) AND ... (range_treeA OR range_treeB_11 OR ... OR range_treeB_1N) Now each line represents an index_merge.. } else if (both A and B are index_merge trees) { Perform this transformation: imergeA1 AND imergeA2 AND ... AND imergeAN OR imergeB1 AND imergeB2 AND ... AND imergeBN -> (discard all imergeA{i=2,3,...} -> // DISCARD-IMERGE-4 imergeA1 OR imergeB1 = = (combine imergeA1 with each of the range_treeB_1{i} ) = combine(imergeA1 OR range_treeB_11) AND combine(imergeA1 OR range_treeB_12) AND ... AND combine(imergeA1 OR range_treeB_1N) } } 1.1. Problems in the current implementation ------------------------------------------- As marked in the code above: DISCARD-IMERGE-1 step will cause index_merge option to be discarded when the WHERE clause has this form: (t.key1=c1 OR t.key2=c2) AND t.badkey < c3 DISCARD-IMERGE-2 step will cause index_merge option to be discarded when the WHERE clause has this form (conditions t.badkey may have abritrary form): (t.badkey<c1 AND t.key1=c1) OR (t.key2=c2 AND t.badkey < c2) DISCARD-IMERGE-3 manifests itself as the following effect: suppose there are two indexes: INDEX i1(col1, col2), INDEX i2(col1, col3) and this WHERE clause: col1=c1 AND (col2=c2 OR col3=c3) The optimizer will generate the plans that only use the "col1=c1" part. The right side of the AND will be ignored even if it has good selectivity. (Here an imerge for col2=c2 OR col3=c3 won't be built since neither col2=c2 nor col3=c3 represent index ranges.) 2. New implementation ===================== <general idea> * Don't start fighting combinatorial explosion until we've actually got one. </> SEL_TREE structure will be now able to hold both index_merge and range scan candidates at the same time. That is, sel_tree2 = range_tree AND imerge_tree where both parts are optional (i.e. can be empty) Operations on SEL_ARG trees will be modified to produce/process the trees of this kind: 2.1 New tree_and() ------------------ In order not to lose plans, we'll make these changes: A1. Don't remove index_merge part of the tree (this will take care of DISCARD-IMERGE-1 problem) A2. Push range conditions down into index_merge trees that may support them. if one tree has range(key1) and the other tree has imerge(key1 OR key2) then perform an equvalent of this operation: rangeA(key1) AND ( rangeB(key1) OR rangeB(key2)) = (rangeA(key1) AND rangeB(key1)) OR (rangeA(key1) AND rangeB(key2)) A3. Just as before: if both sel_tree A and sel_tree B have index_merge options, concatenate them together. 2.2 New tree_or() ----------------- O1. Dont remove non-range plans: Current tree_or() code will refuse to produce index_merge plans for conditions like "t.key1part2=const OR t.key2part1=const" (this is marked as DISCARD-IMERGE-3). This was justifed as the left part of the AND condition is not usable for range access, and the operation of tree_and() guaranteed that there was no way it could changed to make a usable range plan. With new tree_and() and rule A2, this is no longer the case. For example for this query: (t.key1part2=const OR t.key2part1=const) AND t.key1part1=const it will construct a imerge(t.key1part2=const OR t.key2part1=const), range(t.key1part1=const) then tree_and() will apply rule A2 to push the range down into index merge and after that we'll have: range(t.key1part1=const) imerge( t.key1part2=const AND t.key1part1=const, t.key2part1=const ) note that imerge(...) describes a usable index_merge plan and it's possible that it will be the best access path. O2. "Create index_merge accesses when possible" Current tree_or() will not create index_merge access when it could create non-index merge access (see DISCARD-IMERGE-3 and its example in the "Problems in the current implementation" section). This will be changed to work as follows: we will create index_merge made for index scans that didn't have their match in the other sel_tree. Ilustrating it with an example: | sel_tree_A | sel_tree_B | A or B | include in index_merge? ------+------------+------------+--------+------------------------ key1 | cond1 | cond2 | condM | no key2 | cond3 | cond4 | NULL | no key3 | cond5 | | | yes, A-side key4 | cond6 | | | yes, A-side key5 | | cond7 | | yes, B-side key6 | | cond8 | | yes, B-side here we assume that - (cond1 OR cond2) did produce a combined range. Not including them in index_merge. - (cond3 OR cond4) didn't produce a usable range (e.g. they were t.key1part1=c1 AND t.key1part2=c1, respectively, and combining them didn't yield any range list) - All other scand didn't have their counterparts, so we'll end up with a SEL_TREE of: range(condM) AND index_merge((cond5 AND cond6),(cond7 AND cond8)) . O4. There is no O4. DISCARD-INDEX-MERGE-4 will remain there. The idea is that although DISCARD-INDEX-MERGE-4 does discard plans, so far we haven seen any complaints that could be attributed to it. If we face the need to lift DISCARD-INDEX-MERGE-4, our answer will be to lift it ,and produce a cross-product: ((key1p OR key2p) AND (key3p OR key4p)) OR ((key5p OR key6p) AND (key7p OR key8p)) = (key1p OR key2p OR key5p OR key6p) AND // this part is currently (key3p OR key4p OR key5p OR key6p) AND // produced (key1p OR key2p OR key5p OR key6p) AND // this part will be added (key3p OR key4p OR key5p OR key6p) //. In order to limit the impact of this combinatorial explosion, we will introduce a rule that we won't generate more than #defined MAX_IMERGE_OPTS options. 3. Testing and required coverage ================================ So far could find the following user cases: * BUG#17259: Query optimizer chooses wrong index * BUG#17673: Optimizer does not use Index Merge optimization in some cases * BUG#23322: Optimizer sometimes erroniously prefers other index over index merge * BUG#30151: optimizer is very reluctant to chose index_merge algorithm ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] New (by Psergey): Store in binlog text of statements that caused RBR events (47)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Store in binlog text of statements that caused RBR events CREATION DATE..: Sat, 15 Aug 2009, 23:48 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 47 (http://askmonty.org/worklog/?tid=47) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: DESCRIPTION: Store in binlog (and show in mysqlbinlog output) texts of statements that caused RBR events This is needed for (list from Monty): - Easier to understand why updates happened - Would make it easier to find out where in application things went wrong (as you can search for exact strings) - Allow one to filter things based on comments in the statement. The cost of this can be that the binlog will be approximately 2x in size (especially insert of big blob's would be a bit painful), so this should be an optional feature. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] New (by Psergey): Store in binlog text of statements that caused RBR events (47)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Store in binlog text of statements that caused RBR events CREATION DATE..: Sat, 15 Aug 2009, 23:48 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 47 (http://askmonty.org/worklog/?tid=47) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: DESCRIPTION: Store in binlog (and show in mysqlbinlog output) texts of statements that caused RBR events This is needed for (list from Monty): - Easier to understand why updates happened - Would make it easier to find out where in application things went wrong (as you can search for exact strings) - Allow one to filter things based on comments in the statement. The cost of this can be that the binlog will be approximately 2x in size (especially insert of big blob's would be a bit painful), so this should be an optional feature. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Psergey): Change BINLOG statement syntax to be human-readable (46)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Change BINLOG statement syntax to be human-readable CREATION DATE..: Sat, 15 Aug 2009, 23:42 SUPERVISOR.....: Monty IMPLEMENTOR....: Psergey COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 46 (http://askmonty.org/worklog/?tid=46) VERSION........: WorkLog-3.4 STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Psergey - Sat, 15 Aug 2009, 23:43)=-=- High-Level Specification modified. --- /tmp/wklog.46.old.17742 2009-08-15 23:43:09.000000000 +0300 +++ /tmp/wklog.46.new.17742 2009-08-15 23:43:09.000000000 +0300 @@ -1 +1,28 @@ +Suggestion 1 +------------ +Original syntax suggestion by Kristian: + + BINLOG + WITH TIMESTAMP xxx SERVER_ID 1 MASTER_POS 415 FLAGS 0x0 + TABLE db1.table1 AS 1 COLUMNS (INT NOT NULL, BLOB, VARCHAR(100)) FLAGS 0x0 + TABLE db2.table2 AS 2 COLUMNS (CHAR(10)) FLAGS 0x0 + WRITE_ROW INTO db1.table1(1,3) VALUES (42, 'foobar'), (10, NULL) FLAGS 0x2 + UPDATE_ROW INTO db2.table2 (1) (1) VALUES FROM ('beforeval') TO ('toval'), + FROM ('a') TO ('b') FLAGS 0x0 + DELETE_ROW INTO db2.table2 (1) VALUES ('row_to_delete') FLAGS 0x0; + + This is basically a dump of what is stored in the events, and would be an + alternative to BINLOG 'gwWEShMBAA...'. + +Feedback and other suggestions +------------------------------ +* What is the need for WITH TIMESTAMP part? Can't one use a separate + SET TIMESTAMP statement? + +* mysqlbinlog --base64-output=DECODE-ROWS --verbose already produces something + that's close to readable SQL. Can we make it to be regular parseable SQL? + + This will be syntax that's familiar to our parser and to the users + - A stream of SQL statements will be slower to run than BINLOG statements + (due to locking, table open/close, etc). (TODO: is it really slower? we + haven't checked). DESCRIPTION: One of great things about mysqlbinlog was that its output was human-readable SQL, so it was possible to edit it manually or with help of scripts. With RBR events and BINLOG 'DpiGShMBAAAALQAAADcBAA...' statements this is no longer the case. This WL task is about making BINLOG statements to be human-readable (either as an option or by default HIGH-LEVEL SPECIFICATION: Suggestion 1 ------------ Original syntax suggestion by Kristian: BINLOG WITH TIMESTAMP xxx SERVER_ID 1 MASTER_POS 415 FLAGS 0x0 TABLE db1.table1 AS 1 COLUMNS (INT NOT NULL, BLOB, VARCHAR(100)) FLAGS 0x0 TABLE db2.table2 AS 2 COLUMNS (CHAR(10)) FLAGS 0x0 WRITE_ROW INTO db1.table1(1,3) VALUES (42, 'foobar'), (10, NULL) FLAGS 0x2 UPDATE_ROW INTO db2.table2 (1) (1) VALUES FROM ('beforeval') TO ('toval'), FROM ('a') TO ('b') FLAGS 0x0 DELETE_ROW INTO db2.table2 (1) VALUES ('row_to_delete') FLAGS 0x0; This is basically a dump of what is stored in the events, and would be an alternative to BINLOG 'gwWEShMBAA...'. Feedback and other suggestions ------------------------------ * What is the need for WITH TIMESTAMP part? Can't one use a separate SET TIMESTAMP statement? * mysqlbinlog --base64-output=DECODE-ROWS --verbose already produces something that's close to readable SQL. Can we make it to be regular parseable SQL? + This will be syntax that's familiar to our parser and to the users - A stream of SQL statements will be slower to run than BINLOG statements (due to locking, table open/close, etc). (TODO: is it really slower? we haven't checked). ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Psergey): Change BINLOG statement syntax to be human-readable (46)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Change BINLOG statement syntax to be human-readable CREATION DATE..: Sat, 15 Aug 2009, 23:42 SUPERVISOR.....: Monty IMPLEMENTOR....: Psergey COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 46 (http://askmonty.org/worklog/?tid=46) VERSION........: WorkLog-3.4 STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Psergey - Sat, 15 Aug 2009, 23:43)=-=- High-Level Specification modified. --- /tmp/wklog.46.old.17742 2009-08-15 23:43:09.000000000 +0300 +++ /tmp/wklog.46.new.17742 2009-08-15 23:43:09.000000000 +0300 @@ -1 +1,28 @@ +Suggestion 1 +------------ +Original syntax suggestion by Kristian: + + BINLOG + WITH TIMESTAMP xxx SERVER_ID 1 MASTER_POS 415 FLAGS 0x0 + TABLE db1.table1 AS 1 COLUMNS (INT NOT NULL, BLOB, VARCHAR(100)) FLAGS 0x0 + TABLE db2.table2 AS 2 COLUMNS (CHAR(10)) FLAGS 0x0 + WRITE_ROW INTO db1.table1(1,3) VALUES (42, 'foobar'), (10, NULL) FLAGS 0x2 + UPDATE_ROW INTO db2.table2 (1) (1) VALUES FROM ('beforeval') TO ('toval'), + FROM ('a') TO ('b') FLAGS 0x0 + DELETE_ROW INTO db2.table2 (1) VALUES ('row_to_delete') FLAGS 0x0; + + This is basically a dump of what is stored in the events, and would be an + alternative to BINLOG 'gwWEShMBAA...'. + +Feedback and other suggestions +------------------------------ +* What is the need for WITH TIMESTAMP part? Can't one use a separate + SET TIMESTAMP statement? + +* mysqlbinlog --base64-output=DECODE-ROWS --verbose already produces something + that's close to readable SQL. Can we make it to be regular parseable SQL? + + This will be syntax that's familiar to our parser and to the users + - A stream of SQL statements will be slower to run than BINLOG statements + (due to locking, table open/close, etc). (TODO: is it really slower? we + haven't checked). DESCRIPTION: One of great things about mysqlbinlog was that its output was human-readable SQL, so it was possible to edit it manually or with help of scripts. With RBR events and BINLOG 'DpiGShMBAAAALQAAADcBAA...' statements this is no longer the case. This WL task is about making BINLOG statements to be human-readable (either as an option or by default HIGH-LEVEL SPECIFICATION: Suggestion 1 ------------ Original syntax suggestion by Kristian: BINLOG WITH TIMESTAMP xxx SERVER_ID 1 MASTER_POS 415 FLAGS 0x0 TABLE db1.table1 AS 1 COLUMNS (INT NOT NULL, BLOB, VARCHAR(100)) FLAGS 0x0 TABLE db2.table2 AS 2 COLUMNS (CHAR(10)) FLAGS 0x0 WRITE_ROW INTO db1.table1(1,3) VALUES (42, 'foobar'), (10, NULL) FLAGS 0x2 UPDATE_ROW INTO db2.table2 (1) (1) VALUES FROM ('beforeval') TO ('toval'), FROM ('a') TO ('b') FLAGS 0x0 DELETE_ROW INTO db2.table2 (1) VALUES ('row_to_delete') FLAGS 0x0; This is basically a dump of what is stored in the events, and would be an alternative to BINLOG 'gwWEShMBAA...'. Feedback and other suggestions ------------------------------ * What is the need for WITH TIMESTAMP part? Can't one use a separate SET TIMESTAMP statement? * mysqlbinlog --base64-output=DECODE-ROWS --verbose already produces something that's close to readable SQL. Can we make it to be regular parseable SQL? + This will be syntax that's familiar to our parser and to the users - A stream of SQL statements will be slower to run than BINLOG statements (due to locking, table open/close, etc). (TODO: is it really slower? we haven't checked). ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] New (by Psergey): Change BINLOG statement syntax to be human-readable (46)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Change BINLOG statement syntax to be human-readable CREATION DATE..: Sat, 15 Aug 2009, 23:42 SUPERVISOR.....: Monty IMPLEMENTOR....: Psergey COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 46 (http://askmonty.org/worklog/?tid=46) VERSION........: WorkLog-3.4 STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: DESCRIPTION: One of great things about mysqlbinlog was that its output was human-readable SQL, so it was possible to edit it manually or with help of scripts. With RBR events and BINLOG 'DpiGShMBAAAALQAAADcBAA...' statements this is no longer the case. This WL task is about making BINLOG statements to be human-readable (either as an option or by default ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] New (by Psergey): Change BINLOG statement syntax to be human-readable (46)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Change BINLOG statement syntax to be human-readable CREATION DATE..: Sat, 15 Aug 2009, 23:42 SUPERVISOR.....: Monty IMPLEMENTOR....: Psergey COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 46 (http://askmonty.org/worklog/?tid=46) VERSION........: WorkLog-3.4 STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: DESCRIPTION: One of great things about mysqlbinlog was that its output was human-readable SQL, so it was possible to edit it manually or with help of scripts. With RBR events and BINLOG 'DpiGShMBAAAALQAAADcBAA...' statements this is no longer the case. This WL task is about making BINLOG statements to be human-readable (either as an option or by default ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Psergey): Add a mysqlbinlog option to produce succint output (45)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to produce succint output CREATION DATE..: Sat, 15 Aug 2009, 23:40 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 45 (http://askmonty.org/worklog/?tid=45) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Psergey - Sat, 15 Aug 2009, 23:40)=-=- Title modified. --- /tmp/wklog.45.old.17603 2009-08-15 23:40:38.000000000 +0300 +++ /tmp/wklog.45.new.17603 2009-08-15 23:40:38.000000000 +0300 @@ -1 +1 @@ -Add a mysqlbinlog option to produce siccint output +Add a mysqlbinlog option to produce succint output DESCRIPTION: Add a mysqlbinlog option to produce the most succinct output, without any comments or other statements that are not needed to apply binlog correctly. This will be different from --short-form option. That option causes mysqlbinlog not to print RBR events, i.e. the output is not supposed to be applied. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] Updated (by Psergey): Add a mysqlbinlog option to produce succint output (45)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to produce succint output CREATION DATE..: Sat, 15 Aug 2009, 23:40 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 45 (http://askmonty.org/worklog/?tid=45) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: -=-=(Psergey - Sat, 15 Aug 2009, 23:40)=-=- Title modified. --- /tmp/wklog.45.old.17603 2009-08-15 23:40:38.000000000 +0300 +++ /tmp/wklog.45.new.17603 2009-08-15 23:40:38.000000000 +0300 @@ -1 +1 @@ -Add a mysqlbinlog option to produce siccint output +Add a mysqlbinlog option to produce succint output DESCRIPTION: Add a mysqlbinlog option to produce the most succinct output, without any comments or other statements that are not needed to apply binlog correctly. This will be different from --short-form option. That option causes mysqlbinlog not to print RBR events, i.e. the output is not supposed to be applied. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0

[Maria-developers] New (by Psergey): Add a mysqlbinlog option to produce siccint output (45)
by worklog-noreply＠askmonty.org 15 Aug '09

15 Aug '09

----------------------------------------------------------------------- WORKLOG TASK -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- TASK...........: Add a mysqlbinlog option to produce siccint output CREATION DATE..: Sat, 15 Aug 2009, 23:40 SUPERVISOR.....: Monty IMPLEMENTOR....: COPIES TO......: CATEGORY.......: Server-RawIdeaBin TASK ID........: 45 (http://askmonty.org/worklog/?tid=45) VERSION........: Server-9.x STATUS.........: Un-Assigned PRIORITY.......: 60 WORKED HOURS...: 0 ESTIMATE.......: 0 (hours remain) ORIG. ESTIMATE.: 0 PROGRESS NOTES: DESCRIPTION: Add a mysqlbinlog option to produce the most succinct output, without any comments or other statements that are not needed to apply binlog correctly. This will be different from --short-form option. That option causes mysqlbinlog not to print RBR events, i.e. the output is not supposed to be applied. ESTIMATED WORK TIME ESTIMATED COMPLETION DATE ----------------------------------------------------------------------- WorkLog (v3.5.9)

1 0